The fresh changes to the vDSO Makefile in:
289d0a475c ("x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32")
329b77b59f ("x86/vdso: Simplify obj-y addition")
Conflicted with a pending change in:
b388e57d46 ("x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o")
Which was resolved in a simple fasion in this merge commit:
f14df823a6 ("Merge branch 'x86/vdso' into x86/core, to resolve conflict and to prepare for dependent changes")
... but all these changes make me look and notice a bit of historic baggage
left in the Makefile:
- Disordered build rules where non-standard build attributes relating to
were placed sometimes several lines after - and sometimes *before*
the .o build rules of the object files... Functional but inconsistent.
- Inconsistent vertical spacing, stray whitespaces, inconsistent spelling
of 'vDSO' over the years, a few spelling mistakes and inconsistent
capitalization of comment blocks.
Tidy it all up. No functional changes intended.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SCLP driver code masks off the last two bits of the parameter [1]
to determine if a read is required, but doesn't care about the
contents of those bits. Meanwhile, the KVM code that delivers
event interrupts masks off those two bits but sends both to the
guest, even if only one was specified by userspace [2].
This works for the driver code, but it means any nuances of those
bits gets lost. Use the event pending mask as an actual mask, and
only send the bit(s) that were specified in the pending interrupt.
[1] Linux: sclp_interrupt_handler() (drivers/s390/char/sclp.c:658)
[2] QEMU: service_interrupt() (hw/s390x/sclp.c:360..363)
Fixes: 0890ddea1a ("KVM: s390: protvirt: Add SCLP interrupt handling")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240205214300.1018522-1-farman@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20240205214300.1018522-1-farman@linux.ibm.com>
Commit eb9299bead ("ACPI: EC: Use a spin lock without disabing
interrupts") introduced an unexpected user-visible change in
behavior, which is a significant CPU load increase when the EC
is in use.
This most likely happens due to increased spinlock contention
and so reducing this effect would require a major rework of the
EC driver locking. There is no time for this in the current
cycle, so revert commit eb9299bead.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218511
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=iPIR
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) If user requests to wake up a table and hook fails, restore the
dormant flag from the error path, from Florian Westphal.
2) Reset dst after transferring it to the flow object, otherwise dst
gets released twice from the error path.
3) Release dst in case the flowtable selects a direct xmit path, eg.
transmission to bridge port. Otherwise, dst is memleaked.
4) Register basechain and flowtable hooks at the end of the command.
Error path releases these datastructure without waiting for the
rcu grace period.
5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
on access to hook type, also from Florian Westphal.
netfilter pull request 24-02-22
* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
====================
Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Conflicts:
arch/x86/entry/vdso/Makefile
We also want to change arch/x86/entry/vdso/Makefile in a followup
commit, so merge the trees for this.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZdaBCwAKCRDbK58LschI
g3EhAP0d+S18mNabiEGz8efnE2yz3XcFchJgjiRS8WjOv75GvQEA6/sWncFjbc8k
EqxPHmeJa19rWhQlFrmlyNQfLYGe4gY=
=VkOs
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The variable clock is being assigned a value that is never read,
it is being re-assigned a new value in every case in the following
switch statement. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/echoaudio/echoaudio_3g.c:277:2: warning: Value stored
to 'clock' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240221113809.3410109-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Convert the coda filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.rst for more information.
Note this is slightly tricky as coda currently only has a binary mount data
interface. This is handled through the parse_monolithic hook.
Also add a more conventional interface with a parameter named "fd" that
takes an fd that refers to a coda psdev, thereby specifying the index to
use.
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[sandeen: forward port to current upstream mount API interfaces]
Link: https://lore.kernel.org/r/97650eeb-94c7-4041-b58c-90e81e76b699@redhat.com
Tested-by: Jan Harkes <jaharkes@cs.cmu.edu>
Reviewed-by: Ian Kent <raven@themaw.net>
cc: coda@cs.cmu.edu
Signed-off-by: Christian Brauner <brauner@kernel.org>
In '__ep_remove()', prefer 'kfree_rcu()' over 'call_rcu()' with
dummy 'epi_rcu_free()' callback. This follows commit d0089603fa
("fs: prefer kfree_rcu() in fasync_remove_entry()") and should not
be backported to stable as well.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20240221112205.48389-2-dmantipov@yandex.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull simple offset series from Chuck Lever
In an effort to address slab fragmentation issues reported a few
months ago, I've replaced the use of xarrays for the directory
offset map in "simple" file systems (including tmpfs).
Thanks to Liam Howlett for helping me get this working with Maple
Trees.
* series 'Use Maple Trees for simple_offset utilities' of https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net: (6 commits)
libfs: Convert simple directory offsets to use a Maple Tree
test_maple_tree: testing the cyclic allocation
maple_tree: Add mtree_alloc_cyclic()
libfs: Add simple_offset_empty()
libfs: Define a minimum directory offset
libfs: Re-arrange locking in offset_iterate_dir()
Signed-off-by: Christian Brauner <brauner@kernel.org>
MT7981 (Filogic 820) is a low cost version of MT7986 (Filogic 830) with
a similar wireless controller that also supports four interrupts.
Cc: Peter Chiu <chui-hao.chiu@mediatek.com>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The variable tidno is being assigned a value that is not being read
and is being re-assigned a new value a few statements later.
The assignment is redundant and can be removed.
Cleans up clang scan warning:
drivers/net/wireless/mediatek/mt76/agg-rx.c:125:5: warning: Value stored
to 'tidno' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Because the number of channels to be configured is calculated using the %,
and it results in 0 when there's an exact division, this leads to some
channels not having their tx power configured.
Fixes: 7801da3388 ("wifi: mt76: mt7921: enable set txpower for UNII-4")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MediaTek's controller driver on COB platform (e.g. MT8188) is
capable of controlling power supplies and reset pin of a component
(e.g. a WIFI chip) in power-on and power-off process.
Due to this optional feature, mt76 need to inform controller
that mt76 need to keep power during suspend. Otherwise WIFI will be
powered off when system enters suspend process.
The "wakeup-source" property was used for the device that need
this to go into suspend mode so that mt76 suspend handler doesn't
fail and the system is able to enter into a suspend state.
An example:
wifi: mt7921@0 {
wifi0{
reg = <0x0000 0 0 0 0>;
wakeup-source;
};
};
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In multi-channel scenarios, the granted channel must be aborted before
suspending. Otherwise, the firmware will be put into a wrong state,
resulting in an association failure after resuming.
With this patch, the granted channel will be aborted before suspending
if necessary.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before entering suspend, we need to ensure that all MCU command are
completed. In some cases, such as with regd_notifier, there is a
chance that CLC commands, will be executed before suspend.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch updates the EU country list to ensure the MTCL table
works correctly.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In some case, the MTCL table will exist, but MTDS table will not.
So the SAR will init fail. This patch make MTCL and MTDS can exist
with no dependence.
Fixes: f965333e49 ("mt76: mt7921: introduce ACPI SAR support")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
clc->len is defined as 32 bits in length, so it must also be
operated on with 32 bits, not 16 bits.
Fixes: fa6ad88e02 ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312112104.Zkc3QUHr-lkp@intel.com/
Signed-off-by: Felix Fietkau <nbd@nbd.name>
From commit a304e1b828 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
From commit a304e1b828 ("[PATCH] Debug shared irqs"), there is a test
to make sure the shared irq handler should be able to handle the unexpected
event after deregistration. For this case, let's apply MT76_REMOVED flag to
indicate the device was removed and do not run into the resource access
anymore.
BUG: KASAN: use-after-free in mt7921_irq_handler+0xd8/0x100 [mt7921e]
Read of size 8 at addr ffff88824a7d3b78 by task rmmod/11115
CPU: 28 PID: 11115 Comm: rmmod Tainted: G W L 5.17.0 #10
Hardware name: Micro-Star International Co., Ltd. MS-7D73/MPG B650I
EDGE WIFI (MS-7D73), BIOS 1.81 01/05/2024
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x1f/0x190
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
kasan_report.cold+0x7f/0x11b
? mt7921_irq_handler+0xd8/0x100 [mt7921e]
mt7921_irq_handler+0xd8/0x100 [mt7921e]
free_irq+0x627/0xaa0
devm_free_irq+0x94/0xd0
? devm_request_any_context_irq+0x160/0x160
? kobject_put+0x18d/0x4a0
mt7921_pci_remove+0x153/0x190 [mt7921e]
pci_device_remove+0xa2/0x1d0
__device_release_driver+0x346/0x6e0
driver_detach+0x1ef/0x2c0
bus_remove_driver+0xe7/0x2d0
? __check_object_size+0x57/0x310
pci_unregister_driver+0x26/0x250
__do_sys_delete_module+0x307/0x510
? free_module+0x6a0/0x6a0
? fpregs_assert_state_consistent+0x4b/0xb0
? rcu_read_lock_sched_held+0x10/0x70
? syscall_enter_from_user_mode+0x20/0x70
? trace_hardirqs_on+0x1c/0x130
do_syscall_64+0x5c/0x80
? trace_hardirqs_on_prepare+0x72/0x160
? do_syscall_64+0x68/0x80
? trace_hardirqs_on_prepare+0x72/0x160
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CABXGCsOdvVwdLmSsC8TZ1jF0UOg_F_W3wqLECWX620PUkvNk=A@mail.gmail.com/
Fixes: 9270270d62 ("wifi: mt76: mt7921: fix PCI DMA hang after reboot")
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mtcl table provided regulatory information for 5.9/6Ghz channels and
configured by platform venders. So, sometimes vendors may write illegal
values, and therefore it is necessary to check and add corresponding
handling for such cases.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For the member of 'struct scan_req_tlv', replace data type of
func_mask_ext from 'u8' to '__le32'.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In order to recycle skbs in the page_pool "hot" cache in
napi_pp_put_page routine, set napi pointer for MMIO devices in
mt76_create_page_pool().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce wed.c in order to collect mt76 wed common codebase used by
mt7915 and mt7996 drivers.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a missing EHT related field to fix the following ethtool warning:
[98179.287352] mt7921e 0003:01:00.0: ei: 74 SSTATS_LEN: 73
Fixes: c74df1c067 ("wifi: mt76: mt792x: introduce mt792x-lib module")
Signed-off-by: Gen Xu <genxu6@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sync the value of HIF_TXD_V2_1 with firmware to let it correctly fill
TXD values for HW path.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The MUAR (multicast unicast address) is an address mapping table that
participates in the process of searching WTBL entries. For mt799x
chipsets, the default muar index of BMC WTBL is 0xe.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A race condition was observed when accessing mapped registers, so add
locking to protect against concurrent access.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
DMA queue settings of TXS will be initialized by the firmware.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The efuse data starts from the 48th bytes instead of 64th bytes in the
returned event skb.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since the FW does not support to handle the integrity and validation of
IGTK in GCMP mode, return -EOPNOTSUPP to let it be handled by upper layer.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set correct beamformer capabilities for station vif in HE PHY
capability IE.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If TLV includes beacon content, its length might not be 4-byte aligned.
Make sure the length is aligned before sending beacon commands to FW.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The EHT MCS map subfield of 20 MHz-Only is not present in the EHT
capability of AP, so STA does not need to parse the subfield.
Moreover, AP should parse the subfield only if STA is 20 MHz-Only, which
can be confirmed by checking supported channel width in HE capability.
Fixes: 92aa2da9fa ("wifi: mt76: mt7996: enable EHT support in firmware")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch fixes the following TWT issues:
- Change table_mask to u16 to support up to 16 TWT stations
- Reject TWT flows for duplicated establishment
- Fix possible unaligned pointer
- Remove unsupported TWT_CONTROL_WAKE_DUR_UNIT flag
- The minimum TWT duration supported by mt7996 chipsets is 64. Reply
with TWT_SETUP_CMD_DICTATE if the min_twt_dur is smaller than 64
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The PPDU TXS does not include the error bit so it cannot use to report
status to mac80211. This patch fixes issue that STA wrongly detects if AP
is still alive.
Fixes: 2569ea5326 ("wifi: mt76: mt7996: enable PPDU-TxS to host")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix the wrong WFDMA settings to improve TX performance.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There's a race between driver and fw on some tx/rx control registers
when setting ifs, which will cause accidental hw queue pause problems.
Avoid this by setting ifs time with bss_info mcu command.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
A sub-process of Wifi L0.5 reset will make chip common partition
enter low power, and have chance lead to Bluetooth host-to-chip
command timeout, modify the software flow according to the chip's
design to solve the problem.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The header translation config should set to broadcast and unicast
cases correctly, not only unicast case. And also remove the cmds
of wtbl (wlan table) series, because these MCU commands have
already been replaced by other commands in mt7925.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When in suspend mode, WoW (Wake-on-WLAN) fails to wake the system remotely
due to incorrect encryption mode settings. For the new mt7925 chipset, the
old STA_REC_KEY_V2 command will send incorrect parameters to the firmware.
Therefore, STA_REC_KEY_V3 has been introduced as a replacement for it.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add an address of fw region for fw download.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Firmware uses access class index (ACI) for wmm parameters update,
so convert mac80211 queue to ACI in mt7925_conf_tx().
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Apply query command type properly to make the chip send the response back.
Otherwise, we may see the command timeout in driver side.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Hao Zhang <hao.zhang@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Driver should configure basic rate and phy mode for SAP mode.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: rong.yan <rong.yan@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Driver should setting correct phy mode to firmware when in legacy mode.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Netgear WDNA3100v3 has a chipset that's compatible with the mt76x2u driver
and works without modification with the mainline kernel by writing to sysfs.
Signed-off-by: Dacio Romero <dacioromero@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
