The function xe_vm_prepare_vma was blindly accepting zero as the
number of fences and forwarded that to drm_exec_prepare_obj.
However, that leads to an out-of-bounds shift in the
dma_resv_reserve_fences() and while one could argue that the
dma_resv code should be robust against that, avoid attempting
to reserve zero fences.
Relevant stack trace:
[773.183188] ------------[ cut here ]------------
[773.183199] UBSAN: shift-out-of-bounds in ../include/linux/log2.h:57:13
[773.183241] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[773.183254] CPU: 2 PID: 1816 Comm: xe_evict Tainted: G U 6.8.0-rc3-xe #1
[773.183256] Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 2014 10/14/2022
[773.183257] Call Trace:
[773.183258] <TASK>
[773.183260] dump_stack_lvl+0xaf/0xd0
[773.183266] dump_stack+0x10/0x20
[773.183283] ubsan_epilogue+0x9/0x40
[773.183286] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[773.183293] dma_resv_reserve_fences.cold+0x2b/0x48
[773.183295] ? ww_mutex_lock+0x3c/0x110
[773.183301] drm_exec_prepare_obj+0x45/0x60 [drm_exec]
[773.183313] xe_vm_prepare_vma+0x33/0x70 [xe]
[773.183375] xe_vma_destroy_unlocked+0x55/0xa0 [xe]
[773.183427] xe_vm_close_and_put+0x526/0x940 [xe]
Fixes: 2714d50936 ("drm/xe: Convert pagefaulting code to use drm_exec")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208132115.3132-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit eb538b5574)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
It is still possible to compile-test a kernel without CONFIG_COMMON_CLK
for some ancient ARM boards or other architectures, but this causes a
link failure in the qcom-cpufreq-hw driver:
ERROR: modpost: "devm_clk_hw_register" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!
ERROR: modpost: "devm_of_clk_add_hw_provider" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!
ERROR: modpost: "of_clk_hw_onecell_get" [drivers/cpufreq/qcom-cpufreq-hw.ko] undefined!
Add a Kconfig dependency here to make sure this always work. Apparently
this bug has been in the kernel for a while without me running into it
on randconfig builds as COMMON_CLK is almost always enabled.
I have cross-checked by building an allmodconfig kernel with COMMON_CLK
disabled, which showed no other driver having this problem.
Fixes: 4370232c72 ("cpufreq: qcom-hw: Add CPU clock provider support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
clang-16 warns about a cast between incompatible function types:
drivers/gpu/drm/xe/xe_range_fence.c:155:10: error: cast from 'void (*)(const void *)' to 'void (*)(struct xe_range_fence *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
155 | .free = (void (*)(struct xe_range_fence *rfence)) kfree,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid this with a trivial helper function that calls kfree() here.
v2:
- s/* rfence/*rfence/ (Thomas)
Fixes: 845f64bdbf ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095719.454865-1-arnd@kernel.org
The documentation for default_values mentions high/low which can be
confusing, particularly when the ACTIVE_LOW flag is set.
Replace high/low with active/inactive to clarify that the values are
logical not physical.
Similarly, clarify the interpretation of values in struct gpiohandle_data.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are two legacy, deprecated functions - gpiod_to_chip() and
gpio_device_get_chip() - that still have users in tree. They return the
address of the SRCU-protected chip outside of the read-only critical
sections. They are inherently dangerous and the users should convert to
safer alternatives. Let's explicitly silence lockdep warnings by using
rcu_dereference_check(ptr, 1). While at it: reuse
gpio_device_get_chip() in gpiod_to_chip().
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Lockdep with CONFIG_PROVE_RCU enabled reports false positives about
suspicious rcu_dereference() usage. Let's silence it by using
srcu_dereference() which is the correct helper with SRCU.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
We never dereference the chip pointer in character device code so we can
use the lighter rcu_access_pointer() helper. This also makes lockep
happier as it no longer complains about suspicious rcu_dereference()
usage.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
gpiod_hog() may be called without the gpio_device SRCU read lock taken
so we need to do it here as well. It's alright if someone else is
already holding the lock as SRCU read critical sections can be nested.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
The Snapdragon 670 uses the Qualcomm driver for CPU frequency scaling.
Block this driver from loading on it so the driver does not pollute
dmesg with an error.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Test runners on debug kernels occasionally fail with:
# # RUN tls_err.13_aes_gcm.poll_partial_rec_async ...
# # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1)
# # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0)
# # poll_partial_rec_async: Test failed at step #17
# # FAIL tls_err.13_aes_gcm.poll_partial_rec_async
# not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async
# # FAILED: 698 / 699 tests passed.
This points to the second poll() in the test which is expected
to wait for the sender to send the rest of the data.
Apparently under some conditions that doesn't happen within 5ms,
bump the timeout to 20ms.
Fixes: 23fcb62bc1 ("selftests: tls: add tests for poll behavior")
Link: https://lore.kernel.org/r/20240213142055.395564-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To fully support initializing the LAG support code, a DDP package that
extracts the logical port from the metadata is required. If such a
package is not present, there could be difficulties in supporting some
bond types.
Add a check into the initialization flow that will bypass the new paths
if any of the support pieces are missing.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Fixes: df006dd4b1 ("ice: Add initial support framework for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240213183957.1483857-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using this_cpu_has_cap() has the potential to go wrong when
used system-wide on a preemptible kernel. Instead, use the
__system_matches_cap() helper when checking for FEAT_NV in the
FEAT_NV1 probing helper.
Fixes: 3673d01a2f ("arm64: cpufeatures: Only check for NV1 if NV is present")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/kvmarm/86bk8k5ts3.wl-maz@kernel.org/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
-----BEGIN PGP SIGNATURE-----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=h/fM
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Valentine's day edition, with just few fixes because
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
* tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()
wifi: iwlwifi: Fix some error codes
wifi: iwlwifi: clear link_id in time_event
wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()
====================
Link: https://lore.kernel.org/r/20240214184326.132813-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we hit CQ ring overflow when attempting to post a multishot accept
completion, we don't properly save the result or return code. This
results in losing the accepted fd value.
Instead, we return the result from the poll operation that triggered
the accept retry. This is generally POLLIN|POLLPRI|POLLRDNORM|POLLRDBAND
which is 0xc3, or 195, which looks like a valid file descriptor, but it
really has no connection to that.
Handle this like we do for other multishot completions - assign the
result, and return IOU_STOP_MULTISHOT to cancel any further completions
from this request when overflow is hit. This preserves the result, as we
should, and tells the application that the request needs to be re-armed.
Cc: stable@vger.kernel.org
Fixes: 515e269612 ("io_uring: revert "io_uring fix multishot accept ordering"")
Link: https://github.com/axboe/liburing/issues/1062
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The context persistence code does things like send super high priority
heartbeat pulses to ensure any leaked context can still be pre-empted
and thus isn't a total denial of service but only a minor denial of
service. Unfortunately, it wasn't bothering to restart the heartbeat
worker with a fresh timeout. Thus, if a persistent context happened to
be closed just before the heartbeat was going to go ping anyway then
the forced pulse would get a negligble execution time. And as the
forced pulse is super high priority, the worker thread's next step is
a reset. Which means a potentially innocent system randomly goes boom
when attempting to close a context. So, force a re-schedule of the
worker thread with the appropriate timeout.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110210216.4125092-1-John.C.Harrison@Intel.com
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZczJSxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSHrMBAOfb5uIFGpf7JNlmpDp42y2wD19hxAtv9eWr
ZcJecmhMAQCWAMDfl2D3HxSMQ40QIPGSPr+lMhTvnBa8UoXEpqCUDQ==
=7nhu
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock test fixes from Mickaël Salaün:
"Fix build issues for tests, and improve test compatibility"
* tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix capability for net_test
selftests/landlock: Fix fs_test build with old libc
selftests/landlock: Fix net_test build with old libc
-----BEGIN PGP SIGNATURE-----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=RRGT
-----END PGP SIGNATURE-----
Merge tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regular fixes and one fix for space reservation regression since
6.7 that users have been reporting:
- fix over-reservation of metadata chunks due to not keeping proper
balance between global block reserve and delayed refs reserve; in
practice this leaves behind empty metadata block groups, the
workaround is to reclaim them by using the '-musage=1' balance
filter
- other space reservation fixes:
- do not delete unused block group if it may be used soon
- do not reserve space for checksums for NOCOW files
- fix extent map assertion failure when writing out free space inode
- reject encoded write if inode has nodatasum flag set
- fix chunk map leak when loading block group zone info"
* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't refill whole delayed refs block reserve when starting transaction
btrfs: zoned: fix chunk map leak when loading block group zone info
btrfs: reject encoded write if inode has nodatasum flag set
btrfs: don't reserve space for checksums when writing to nocow files
btrfs: add new unused block groups to the list of unused block groups
btrfs: do not delete unused block group if it may be used soon
btrfs: add and use helper to check if block group is used
btrfs: don't drop extent_map for free space inode on write error
There's nothing magical about vlv+ platforms vs. fastboot.
If it works somewhere it should work everywhere, assuming
we've not missed any crucial state checks. That seems unlikely
on older platforms with less state to check anyway.
Just enable fastboot across the board, and the remove the
remnants of the optional stuff (we already removed the
modparam for fastboot anyway).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Chunk up the humongous dpll_hw_state comparison check into per-platform
variants, implemented in the dpll_mgr. This is step one in allowing
each platform (or perhaps even PLL) type to have a custom hw state
structure instead of having to smash it all into one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209183809.16887-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
This KUnit update for Linux 6.8-rc5 consists of one important fix
to unregister kunit_bus when KUnit module is unloaded. Not doing
so causes an error when KUnit module tries to re-register the bus
when it gets reloaded.
-----BEGIN PGP SIGNATURE-----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=bDqz
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
"One important fix to unregister kunit_bus when KUnit module is
unloaded.
Not doing so causes an error when KUnit module tries to re-register
the bus when it gets reloaded"
* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: device: Unregister the kunit_bus on shutdown
Commit 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)
Cc: Vlad Buslov <vladbu@nvidia.com>
Fixes: 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When a DNAT rule is configured via iptables with different port ranges,
iptables -t nat -A PREROUTING -p tcp -d 10.0.0.2 -m tcp --dport 32000:32010
-j DNAT --to-destination 192.168.0.10:21000-21010
we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random. The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination. In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.
This patch intends to restore the behavior observed prior to the "Fixes"
tag.
Fixes: 6ed5943f87 ("netfilter: nat: remove l4 protocol port rovers")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing : in kdoc field names.
Fixes: 8683f4b995 ("nft_set_pipapo: Prepare for vectorised implementation: helpers")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Real-world BPF applications keep growing in size. Medium-sized production
application can easily have 50K+ verified instructions, and its line
info section in .BTF.ext has more than 3K entries.
When verifier emits log with log_level>=1, it annotates assembly code
with matched original C source code. Currently it uses linear search
over line info records to find a match. As complexity of BPF
applications grows, this O(K * N) approach scales poorly.
So, let's instead of linear O(N) search for line info record use faster
equivalent O(log(N)) binary search algorithm. It's not a plain binary
search, as we don't look for exact match. It's an upper bound search
variant, looking for rightmost line info record that starts at or before
given insn_off.
Some unscientific measurements were done before and after this change.
They were done in VM and fluctuate a bit, but overall the speed up is
undeniable.
BASELINE
========
File Program Duration (us) Insns
-------------------------------- ---------------- ------------- ------
katran.bpf.o balancer_ingress 2497130 343552
pyperf600.bpf.linked3.o on_event 12389611 627288
strobelight_pyperf_libbpf.o on_py_event 387399 52445
-------------------------------- ---------------- ------------- ------
BINARY SEARCH
=============
File Program Duration (us) Insns
-------------------------------- ---------------- ------------- ------
katran.bpf.o balancer_ingress 2339312 343552
pyperf600.bpf.linked3.o on_event 5602203 627288
strobelight_pyperf_libbpf.o on_py_event 294761 52445
-------------------------------- ---------------- ------------- ------
While Katran's speed up is pretty modest (about 105ms, or 6%), for
production pyperf BPF program (on_py_event) it's much greater already,
going from 387ms down to 295ms (23% improvement).
Looking at BPF selftests's biggest pyperf example, we can see even more
dramatic improvement, shaving more than 50% of time, going from 12.3s
down to 5.6s.
Different amount of improvement is the function of overall amount of BPF
assembly instructions in .bpf.o files (which contributes to how much
line info records there will be and thus, on average, how much time linear
search will take), among other things:
$ llvm-objdump -d katran.bpf.o | wc -l
3863
$ llvm-objdump -d strobelight_pyperf_libbpf.o | wc -l
6997
$ llvm-objdump -d pyperf600.bpf.linked3.o | wc -l
87854
Granted, this only applies to debugging cases (e.g., using veristat, or
failing verification in production), but seems worth doing to improve
overall developer experience anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240214002311.2197116-1-andrii@kernel.org
Updates the bootloader and installation instructions in
admin-guide/README.rst to align with modern practices.
Details of Changes:
- Added guidance on using EFISTUB for UEFI/EFI systems.
- Noted that LILO is no longer in active development and provides
alternatives.
- Kept LILO instructions but marked as Legacy LILO Instructions.
Suggest removal in future patch.
Signed-off-by: Hunter Chasens <hunter.chasens18@ncf.edu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
[jc: repaired added whitespace warnings]
Link: https://lore.kernel.org/r/20240207171007.45405-1-hunter.chasens18@ncf.edu
The script tools/net/ynl/ynl-gen-rst.py (YNL_TOOL) generates several .rst
files (YNL_INDEX, YNL_RST_FILES) in Documentation/networking/netlink_spec
(YNL_RST_DIR) which are not deleted by make cleandocs.
Fix make cleandocs by deleting the generated .rst files.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240208145001.61769-1-thorsten.blum@toblux.com
This file is using an ungodly mixture of 4 spaces, 2-wide tabs, 4-wide
tabs, _and_ 8-wide tabs, making it really hard to find good editor
settings for working with this file.
Bite the bullet and reindent it by hand. I tried using both perltidy
and vim, but neither of them were up to the task without changing too
much or getting confused about what they were supposed to be doing.
I did change a few instances of
}
else
into
} else
(and same for elsif); the file is again written using both styles, and
I left functions which already seemed self-consistent alone.
You can verify that this commit only changes whitespace using e.g.:
git diff --ignore-all-space --word-diff
or to see (only) the instances where newlines were added/removed:
git diff --ignore-all-space
You can also see the delta from what perltidy would have wanted to
do to this file (when asked to only indent it), which isn't that much
in the end:
perltidy -io -fnl scripts/kernel-doc
git diff --no-index scripts/kernel-doc{,.tdy}
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240208161705.888385-1-vegard.nossum@oracle.com
The Python module pyyaml is required to build the docs, but it is only
listed in Documentation/sphinx/requirements.txt and is therefore missing
when Sphinx is installed as a package and not via pip/pypi.
Add pyyaml as an optional package for multiple distros to fix building the
docs if you prefer to install Sphinx as a package.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240208205550.984-1-thorsten.blum@toblux.com
This patch adds the italian translation for I2C subsystem summary and
protocol. Plus, a reference in the subsystem-apis page.
Signed-off-by: Davide Benini <davide.benini@gmail.com>
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240209220126.28042-1-federico.vaga@vaga.pv.it
Support PSP ip block discovery for psp v14.
Add psp ip block for psp v14_0_2 and v14_0_3.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new parameter psp_timeout to limit psp related operation
to unify the timeout limition for psp.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set boot_time_tmr flag for the ASIC which MP0 ip version
newer than 14.0.2
For runtime TMR:
Init tmr and load tmr should did.
For boottime TMR:
If do not support autoload, skip init TMR.
If support autoload, excute init TMR but skip load tmr.
v2: rebase (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add flag boot_time_tmr to indicate boot time TMR or runtime TMR
instead of function.
v2: rework logic (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set psp->autoload_supported to true by default,
as only a few version of ASIC not support autoload,
and the furture version of PSP should support this.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The netdev-FAQ page in the italian translation was creted to avoid
having broken links. With the evolution of the documentation this was
not referenced anymore, but the page never removed.
Reported-by: Davide Benini <davide.benini@gmail.com>
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240209222115.31505-1-federico.vaga@vaga.pv.it
[Why/How]
A regression was identified with the change to add left edge pixel for
YCbCr422/420 + ODM combine cases.
This reverts commit 288c0254a0
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support PSP ip block for psp v14.
Add psp ip block for psp v14_0_2 and v14_0_3.
v2: sqaush in 14.0.3 firmware fix (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spirom update typically requires extremely long
duration for command execution, and special helper
function to wait for it's completion.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow reducing max UCLK in MANUAL performance level. New UCLK value
should be less than the max DPM level UCLK level value.
Ex:
echo manual > "/sys/bus/pci/devices/.../power_dpm_force_performance_level"
echo m 1 900 > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
echo c > "/sys/bus/pci/devices/.../pp_od_clk_voltage”
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reservation is there to catch NULL pointer dereferences from the
GPU. Reduce the size to 64KB to make sure that shared virtual address
programming models can map all CPU-accessible virtual addresses for GPU
access. This is also the default for CPU virtual address mappings as
seen in /proc/sys/vm/mmap_min_addr.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gfx11 debug flags mask is currently set with an implicit assumption that
no other mqd update flags exist. This needs to be fixed with newly
introduced flag UPDATE_FLAG_IS_GWS by the previous patch.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cooperative group dispatch scenarios the default SPI resource
allocation may cause reduced per-CU workgroup occupancy. Set
COMPUTE_RESOURCE_LIMITS.FORCE_SIMD_DIST=1 to mitigate soft hang
scenarions.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Suggested-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
