Shinas Rasheed says:
====================
add octeon_ep_vf driver
This driver implements networking functionality of Marvell's Octeon
PCI Endpoint NIC VF.
This driver support following devices:
* Network controller: Cavium, Inc. Device b203
* Network controller: Cavium, Inc. Device b403
* Network controller: Cavium, Inc. Device b103
* Network controller: Cavium, Inc. Device b903
* Network controller: Cavium, Inc. Device ba03
* Network controller: Cavium, Inc. Device bc03
* Network controller: Cavium, Inc. Device bd03
Changes:
V7:
- Separated octep_vf_get_if_stats from octep_vf_main.h to later patch
in [1/8]
- Moved introducing ndo_ops from [3/8] to [5/8]
V6: https://lore.kernel.org/all/20240207065207.3092004-1-srasheed@marvell.com/
- Removed reuse of netif_tx_stop_all_queues, called implicitly in
netif_tx_disable, when stopping netdev
- Corrected error jump labels to have proper action-specific names in
probe function
- Removed singlethreaded workqueue implementation, since only tx
timeout task is run. Run the same in the system workqueue
- netdev_hold when tx_timeout happens to protect against free_netdev
if race occurs between rmmod and a tx timeout. netdev_put the
reference when timeout task ends to progress freeing netdev
V5: https://lore.kernel.org/all/20240129050254.3047778-1-srasheed@marvell.com/
- Changed unchecked return types to void and removed unnecessary
initializations in [2/8] patch.
V4: https://lore.kernel.org/all/20240108124213.2966536-1-srasheed@marvell.com/
- Moved some stats from ethtool and added more to ndo_get_stats64
- Replaced code in IQ full check function to use helper from
net/netdev_queues.h
- Refactored code so that NETDEV_TX_BUSY is avoided
V3: https://lore.kernel.org/all/20240105203823.2953604-1-srasheed@marvell.com/
- Removed UINT64_MAX, which is unused
- Replaced masks and ULL declarations with GENMASK_ULL(), ULL() and
other linux/bits.h macros, corrected declarations to conform to xmas tree format in patch [2/8]
- Moved vfree and vzalloc null pointer casting corrections to patch
[3/8], and corrected return values to follow standard kernel error codes in same
- Set static budget of 64 for tx completion processing in NAPI
- Replaces napi_complete and build_skb APIs to napi_complete_done and
napi_build_skb APIs respectively
- Replaced code with helper from net/netdev_queues.h to wake queues in TX completion
processing
- Removed duplicate reporting of TX/RX packets/bytes, which is already
done during ndo_get_stats64
V2: https://lore.kernel.org/all/20231223134000.2906144-1-srasheed@marvell.com/
- Removed linux/version.h header file from inclusion in
octep_vf_main.c
- Corrected Makefile entry to include building octep_vf_mbox.c in
[6/8] patch.
- Removed redundant vzalloc pointer cast and vfree pointer check in
[6/8] patch.
V1: https://lore.kernel.org/all/20231221092844.2885872-1-srasheed@marvell.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the following ethtool commands:
ethtool -i|--driver devname
ethtool devname
ethtool -S|--statistics devname
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to enable MSI-x and register interrupts.
Add support to process Tx and Rx traffic. Includes processing
Tx completions and Rx refill.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ndo ops to set MAC address, change MTU, get stats.
Add control path support to set MAC address, change MTU, get stats,
set speed, get and set link mode.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement Tx/Rx ring resource allocation and cleanup.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement VF-PF mailbox to send all control commands from VF to PF
and receive responses and notifications from PF to VF.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement hardware resource init and shutdown helper APIs, like
hardware Tx/Rx queue init/enable/disable/reset.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC VF.
Add implementation to load module, initialize, register network device,
cleanup and unload module.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling rtla with clang, I am getting the following warnings:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[..]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/osnoise_hist.o src/osnoise_hist.c
src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/osnoise_hist.c:149:6: note: uninitialized use occurs here
149 | if (bucket < entries)
| ^~~~~~
src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
139 | bucket = duration / data->bucket_size;
src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning
132 | int bucket;
| ^
| = 0
1 warning generated.
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/timerlat_hist.o src/timerlat_hist.c
src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/timerlat_hist.c:204:6: note: uninitialized use occurs here
204 | if (bucket < entries)
| ^~~~~~
src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
182 | bucket = latency / data->bucket_size;
src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning
175 | int bucket;
| ^
| = 0
1 warning generated.
This is a legit warning, but data->bucket_size is always > 0 (see
timerlat_hist_parse_args()), so the if is not necessary.
Remove the unneeded if (data->bucket_size) to avoid the warning.
Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Donald Zickus <dzickus@redhat.com>
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Fixes: 829a6c0b56 ("rtla/osnoise: Add the hist mode")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Some debug messages carried the ip name, or included "lima", or
included both the ip name and then the numbered ip name again.
Make the messages more consistent by always looking up and showing
the ip name first.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-9-nunes.erico@gmail.com
The previous 500ms default timeout was fairly optimistic and could be
hit by real world applications. Many distributions targeting devices
with a Mali-4xx already bumped this timeout to a higher limit.
We can be generous here with a high value as 10s since this should
mostly catch buggy jobs like infinite loop shaders, and these don't
seem to happen very often in real applications.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-8-nunes.erico@gmail.com
Marking the context as guilty currently only makes the application which
hits a single timeout problem to stop its rendering context entirely.
All jobs submitted later are dropped from the guilty context.
Lima runs on fairly underpowered hardware for modern standards and it is
not entirely unreasonable that a rendering job may time out occasionally
due to high system load or too demanding application stack. In this case
it would be generally preferred to report the error but try to keep the
application going.
Other similar embedded GPU drivers don't make use of the guilty context
flag. Now that there are reliability improvements to the lima timeout
recovery handling, drop the guilty contexts to let the application keep
running in this case.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-7-nunes.erico@gmail.com
There are several unexplained and unreproduced cases of rendering
timeouts with lima, for which one theory is high IRQ latency coming from
somewhere else in the system.
This kind of occurrence may cause applications to trigger unnecessary
resets of the GPU or even applications to hang if it hits an issue in
the recovery path.
Panfrost already does some special handling to account for such
"spurious timeouts", it makes sense to have this in lima too to reduce
the chance that it hit users.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-6-nunes.erico@gmail.com
This is required for reliable hard resets. Otherwise, doing a hard reset
while a task is still running (such as a task which is being stopped by
the drm_sched timeout handler) may result in random mmu write timeouts
or lockups which cause the entire gpu to hang.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-5-nunes.erico@gmail.com
This is required for reliable hard resets. Otherwise, doing a hard reset
while a task is still running (such as a task which is being stopped by
the drm_sched timeout handler) may result in random mmu write timeouts
or lockups which cause the entire gpu to hang.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-4-nunes.erico@gmail.com
Lima gp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-3-nunes.erico@gmail.com
Lima pp jobs use an async reset to avoid having to wait for the soft
reset right after a job. The soft reset is done at the end of a job and
a reset_complete flag is expected to be set at the next job.
However, in case the user runs into a job timeout from any application,
a hard reset is issued to the hardware. This hard reset clears the
reset_complete flag, which causes an error message to show up before the
next job.
This is probably harmless for the execution but can be very confusing to
debug, as it blames a reset timeout on the next application to submit a
job.
Reset the async_reset flag when doing the hard reset so that we don't
get that message.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-2-nunes.erico@gmail.com
Issue IP reset before shutdown in order to
complete all upstream requests to the SOC.
Without this DevTLB is complaining about
incomplete transactions and NPU cannot resume from
suspend.
This problem is only happening on recent IFWI
releases.
IP reset in rare corner cases can mess up PCI
configuration, so save it before the reset.
After this happens it is also impossible to
issue PLL requests and D0->D3->D0 cycle is needed
to recover the NPU. Add WP 0 request on power up,
so the PUNIT is always notified about NPU reset.
Use D0/D3 cycle for recovery as it can recover
from failed IP reset and FLR cannot.
Fixes: 3f7c063492 ("accel/ivpu/37xx: Fix hangs related to MMIO reset")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207102446.3126981-1-jacek.lawrynowicz@linux.intel.com
Since commit d492cc2573 ("driver core: device.h: make struct bus_type
a const *"), the driver core can properly handle constant struct
bus_type, move the s3c6410_subsys variable to be a constant structure as
well, placing it into read-only memory which can not be modified at
runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-arm-v1-1-41d651dd8411@marliere.net
Link: https://lore.kernel.org/r/20240211-bus_cleanup-arm-v2-1-3de9e8af7cbd@marliere.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Merge series from Hans de Goede <hdegoede@redhat.com>:
While testing 6.8 on a Bay Trail device with a ALC5640 codec
I noticed a regression in 6.8 which causes a NULL pointer deref
in probe().
All BYT/CHT Intel machine drivers are affected. Patch 1/2 of
this series fixes all of them.
Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for
issues which I noticed while working on 1/2.
File open requests made to the server contain a
CreateGuid, which is used by the server to identify
the open request. If the same request needs to be
replayed, it needs to be sent with the same CreateGuid
in the durable handle v2 context.
Without doing so, we could end up leaking handles on
the server when:
1. multichannel is used AND
2. connection goes down, but not for all channels
This is because the replayed open request would have a
new CreateGuid and the server will treat this as a new
request and open a new handle.
This change fixes this by reusing the existing create_guid
stored in the cached fid struct.
REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In this loop, we step through the buffer and after each item we check
if the size_left is greater than the minimum size we need. However,
the problem is that "bytes_left" is type ssize_t while sizeof() is type
size_t. That means that because of type promotion, the comparison is
done as an unsigned and if we have negative bytes left the loop
continues instead of ending.
Fixes: fe856be475 ("CIFS: parse and store info on iface queries")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The driver uses regmap APIs so it should make sure they are available.
Fixes: c75f4bf680 ("power: supply: Introduce MM8013 fuel gauge driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240204-mm8013-regmap-v1-1-7cc6b619b7d3@weissschuh.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add bindings for the LTC4282 High Current Hot Swap Controller with I2C
Compatible Monitoring.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240129-b4-ltc4282-support-v4-1-fe75798164cc@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use _pmbus_write_word_data to allow intercepting writes to
PMBUS_SMBALERT_MASK in the custom chip specific code.
This is required for MP2971/MP2973 which doesn't follow the
PMBUS specification for PMBUS_SMBALERT_MASK.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240130152903.3651341-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Class-based I2C probing requires detect() and address_list both
to be set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if the driver
doesn't implement detect().
Class-based probing is a legacy mechanism, in addition apparently
nobody ever noticed that class-based probing has been non-functional
in both drivers from the very beginning. So drop the fragments of
class-based probing support.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/13ce7c11-a958-4892-ada9-faf5bfdcb89d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Drop maintainer entries for MAX31760 and MAX31827 since the e-mail
addresses of their maintainers is no longer reachable and there is
no known alternative means to contact them.
HWMON drivers have a subsystem maintainer, so individual maintainer
entries are not mandatory.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Class-based I2C probing requires detect() and address_list to be
set in the I2C client driver, see checks in i2c_detect().
It's misleading to declare I2C_CLASS_HWMON support if this
precondition isn't met.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/75747c6a-d414-4b07-8f66-5a5cdddc3c36@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There are two drivers in the Linux kernel. One is hwmon based and second
IIO. IIO version requires to define #io-channel-cells to operate.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/aa303b9fe3116e7f98d6b72822f7f57694366db3.1703077926.git.michal.simek@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a label property to allow a custom name to be used for identifying
a device on the board. This is useful when multiple devices are present on
the same board. Similar change was done by commit ffae65fb1a
("dt-bindings: spi: spi-cadence: Add label property").
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6f3c57d08984c1978569d3918cb38eb295c0c67d.1703077926.git.michal.simek@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
HWMON_CHANNEL_INFO() is supposed to be used as initializer for arrays of
const struct hwmon_channel_info *. However, without explicit const,
HWMON_CHANNEL_INFO() creates mutable compound literals, and the const
pointers point at the mutable data. Add const to place the data in
rodata.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20240117114405.1506775-1-jani.nikula@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add bindings and driver for the three MSM8909 NoCs/interconnects:
BIMC, SNoC and PCNoC. The driver allows scaling the bus bandwidths
for better power management.
* icc-msm8909
dt-bindings: interconnect: Add Qualcomm MSM8909 DT bindings
interconnect: qcom: Add MSM8909 interconnect provider driver
interconnect: qcom: msm8909: constify pointer to qcom_icc_node
Link: https://lore.kernel.org/r/20231220-icc-msm8909-v2-0-3b68bbed2891@kernkonzept.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pointers to struct qcom_icc_bcm are const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240208105056.128448-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The atomic_mode_set() callback only sets the phys_enc's IRQ data. As the
INTF and WB are statically allocated to each encoder/phys_enc, drop the
atomic_mode_set callback and set the IRQs during encoder init.
For the CMD panel usecase some of IRQ indexes depend on the selected
resources. Move setting them to the irq_enable() callback.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/577529/
Link: https://lore.kernel.org/r/20240208-fd_remove_phys_ops_atomic_mode_set-v4-3-caf5dcd125c0@linaro.org
