perf_sched__map() needs to free memory of map_cpus, color_pids and
color_cpus in normal path and rollback allocated memory in error path.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-3-yangjihong1@huawei.com
There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0
The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places.
Fixes: cabc9d4933 ("net: lan966x: Add lag support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Async can schedule a number of interdependent work items. However, since
5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues"), unbound workqueues have separate min_active which sets
the number of interdependent work items that can be handled. This default
value is 8 which isn't sufficient for async and can lead to stalls during
resume from suspend in some cases.
Let's use a dedicated unbound workqueue with raised min_active.
Link: http://lkml.kernel.org/r/708a65cc-79ec-44a6-8454-a93d0f3114c3@samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since 5797b1c189 ("workqueue: Implement system-wide nr_active enforcement
for unbound workqueues"), unbound workqueues have separate min_active which
sets the number of interdependent work items that can be handled. This value
is currently initialized to WQ_DFL_MIN_ACTIVE which is 8. This isn't high
enough for some users, let's add an interface to adjust the setting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix the kernel-doc comment of the unplug_oldest_pwq() function to enable
proper processing and formatting of the embedded ASCII diagram.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tony Nguyen says:
====================
igc: ethtool: Flex filter cleanup
Kurt Kanzenbach says:
This series contains some cosmetics for the flex filter code. The fixes have
been merged separately via -net already.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Unify filtering rule fields
igc: Use netdev printing functions for flex filters
igc: Use reverse xmas tree
====================
Link: https://lore.kernel.org/r/20240207191656.1250777-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing tdc with parallel tests for mirred to block we caught an
intermittent bug. The blockid was being zeroed out when a net device
was deleted and, thus, giving us an incorrect blockid value whenever
we tried to dump the mirred action. Since we don't increment the block
refcount in the control path (and only use the ID), we don't need to
zero the blockid field whenever a net device is going down.
Fixes: 42f39036cd ("net/sched: act_mirred: Allow mirred to block")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240207222902.1469398-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpgso regression test configures routing and device MTU directly through
uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it,
it takes more effort than doing it from shell.
Looking forward, we would like to extend the udpgso regression tests to
cover the EIO corner case [1], once it gets addressed. That will require a
dummy device and device feature manipulation to set it up. Which means more
Netlink code.
So, in preparation, pull out network configuration into the shell script
part of the test, so it is easily extendable in the future.
Also, because it now easy to setup routing, add a second local IPv6
address. Because the second address is not managed by the kernel, we can
"replace" the corresponding local route with a reduced-MTU one. This
unblocks the disabled "ipv6 connected" test case. Add a similar setup for
IPv4 for symmetry.
[1] https://lore.kernel.org/netdev/87jzqsld6q.fsf@cloudflare.com/
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240207-jakub-krn-635-v3-1-3dfa3da8a7d3@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert EEE handling to use linkmode bitmaps. This prepares for
removing the legacy bitmaps from struct ethtool_keee.
No functional change intended.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/c5a61d57-d2b0-427f-93b3-fcf7721165f3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert EEE handling to use linkmode bitmaps. This prepares for
removing the legacy bitmaps from struct ethtool_keee.
No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/948562fb-c5d8-4912-8b88-bec56238732a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aaron Conole says:
====================
net: openvswitch: limit the recursions from action sets
Open vSwitch module accepts actions as a list from the netlink socket
and then creates a copy which it uses in the action set processing.
During processing of the action list on a packet, the module keeps a
count of the execution depth and exits processing if the action depth
goes too high.
However, during netlink processing the recursion depth isn't checked
anywhere, and the copy trusts that kernel has large enough stack to
accommodate it. The OVS sample action was the original action which
could perform this kinds of recursion, and it originally checked that
it didn't exceed the sample depth limit. However, when sample became
optimized to provide the clone() semantics, the recursion limit was
dropped.
This series adds a depth limit during the __ovs_nla_copy_actions() call
that will ensure we don't exceed the max that the OVS userspace could
generate for a clone().
Additionally, this series provides a selftest in 2/2 that can be used to
determine if the OVS module is allowing unbounded access. It can be
safely omitted where the ovs selftest framework isn't available.
====================
Link: https://lore.kernel.org/r/20240207132416.1488485-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16. Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ovs module allows for some actions to recursively contain an action
list for complex scenarios, such as sampling, checking lengths, etc.
When these actions are copied into the internal flow table, they are
evaluated to validate that such actions make sense, and these calls
happen recursively.
The ovs-vswitchd userspace won't emit more than 16 recursion levels
deep. However, the module has no such limit and will happily accept
limits larger than 16 levels nested. Prevent this by tracking the
number of recursions happening and manually limiting it to 16 levels
nested.
The initial implementation of the sample action would track this depth
and prevent more than 3 levels of recursion, but this was removed to
support the clone use case, rather than limited at the current userspace
limit.
Fixes: 798c166173 ("openvswitch: Optimize sample action for the clone use cases")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 3a2746320403 ("leds: trigger: netdev: Display only supported link
speed attribute") the check for valid link modes can be simplified.
In addition factor it out, so that it can be re-used by the upcoming
LED support for RTL8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/8876a9f4-7a2d-48c3-8eae-0d834f5c27c5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The altnames test uses the forwarding/lib.sh and that dependency
currently causes failures when running the test after install:
make -C tools/testing/selftests/ TARGETS=net install
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:altnames.sh
# ...
# ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory
# RTNETLINK answers: Operation not permitted
# ./altnames.sh: line 73: tests_run: command not found
# ./altnames.sh: line 65: pre_cleanup: command not found
Address the issue leveraging the TEST_INCLUDES infrastructure
provided by commit 2a0683be5b ("selftests: Introduce Makefile variable
to list shared bash scripts")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Based on our implementation of multichannel, it is entirely
possible that a server struct may not be found in any channel
of an SMB session.
In such cases, we should be prepared to move on and search for
the server struct in the next session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a tcon is marked for need_reconnect, the intention
is to have it reconnected.
This change adjusts tcon->status in cifs_tree_connect
when need_reconnect is set. Also, this change has a minor
correction in resetting need_reconnect on success. It makes
sure that it is done with tc_lock held.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Michael Chan says:
====================
bnxt_en: Ntuple and RSS updates
This patch series adds more ntuple and RSS features following recent
patches to add support for user configured ntuple filters. Additional
features include L2 ether filters, partial tuple masks, IP filters
besides TCP/UDP, drop action, saving and re-applying user filters
after driver reset, user configured RSS key, and RSS for IPSEC.
====================
Link: https://lore.kernel.org/r/20240205223202.25341-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPSec uses two distinct protocols, Authentication Header (AH) and
Encapsulating Security Payload (ESP).
Add support to configure RSS based on AH and ESP headers.
This functionality will be enabled based on the capabilities
indicated by the firmware in HWRM_VNIC_QCAPS.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-14-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cached user filters slated to be reapplied need to
be cleared if configured MAC changes, RSS key changes,
number of rings changes, or ntuple is disabled.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-13-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the user configured or generated Toeplitz key in
bp->rss_hash_key. The key stays constant across ifdown/ifup
unless updated by the user.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-12-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Walk the usr_fltr_list and call firmware to add these filters when
we open the NIC. This will restore all user created filters after
reset.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver should not free user created filters from its memory
when closing since we are going to reconfigure them when
we open again. If the "all" parameter is false, do not free
user configured filters in bnxt_free_ntp_fltrs() and
bnxt_free_l2_filters().
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver needs to maintain a lookup list of all the user configured
filters. This is required in order to reconfigure these filters upon
interface toggle. We can look up this list to follow the order with
which they should be re-applied.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since we are going to do filter deletion at multiple places in the
upcoming patches, add a function that does the deletion. Future patches
add more code into this function.
Since we are passing the address of the filter base to free the
entire filter structure, add a comment to make sure that the base
is always at the beginning of the structure.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add drop action for protocols TCP/UDP/ICMP
1) Drop action for TCP/UDP is supported via flow type
tcp4/udp4/tcp6/udp6.
2) Drop action for ICMPV4/ICMPV6/wildcard is supported
via flow type ipv4/ipv6.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable flow type ipv4/ipv6
1) for protocols ICMPV4 and ICMPV6.
2) for wildcard match. Wildcard matches to TCP/UDP/ICMP.
Note that, IPPROTO_RAW(255) i.e. a reserved protocol
considered for a wildcard.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support subfield masking for IP addresses and ports. Previously, only
entire fields could be included or excluded in NTUPLE filters.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20240205223202.25341-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement ETHTOOL_GRXCLSRULE for the user defined ether filters. Use
the common functions to walk the L2 filter hash table.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20240205223202.25341-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ETHTOOL_SRXCLSRLINS and ETHTOOL_SRXCLSRLDEL support for inserting
and deleting L2 ether filter rules. Destination MAC address and
optional VLAN are supported for each filter entry. This is currently
only supported on older BCM573XX and BCM574XX chips only.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While individual filter structures are allocated as needed, there is an
array to keep track of the software filter IDs that we allocate ahead
of time. Rather than relying on a fixed maximum filter count to
allocate this array, get the maximum from the firmware when available.
Move these filter related maximum counts queried from the firmware to the
bnxt_hw_resc struct. If the firmware is not providing these maximum
counts, fall back to the hard-coded constant.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20240205223202.25341-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 8 new mirred tdc tests that target mirred to block:
- Add mirred mirror to egress block action
- Add mirred mirror to ingress block action
- Add mirred redirect to egress block action
- Add mirred redirect to ingress block action
- Try to add mirred action with both dev and block
- Try to add mirred action without specifying neither dev nor block
- Replace mirred redirect to dev action with redirect to block
- Replace mirred redirect to block action with mirror to dev
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240202020726.529170-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A wrapper function is available since the commit 890cc39a87
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/f87065d0-e398-4ffa-bfa4-9ff99d73f206@web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A wrapper function is available since the commit 890cc39a87
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/46f64db3-3f8f-4c6c-8d70-38daeefccac1@web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When VIDEO is not set, there is a build error. Fix that by selecting
VIDEO for PS3_PS3AV.
ERROR: modpost: ".video_get_options" [drivers/ps3/ps3av_mod.ko] undefined!
Fixes: dae7fbf43f ("driver/ps3: Include <video/cmdline.h> for mode parsing")
Fixes: a3b6792e99 ("video/cmdline: Introduce CONFIG_VIDEO for video= parameter")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geoff Levand <geoff@infradead.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207161322.8073-1-rdunlap@infradead.org
Ido Schimmel says:
====================
selftests: forwarding: Various fixes
Fix various problems in the forwarding selftests so that they will pass
in the netdev CI instead of being ignored. See commit messages for
details.
====================
Link: https://lore.kernel.org/r/20240208155529.1199729-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The redirection test case fails in the netdev CI on debug kernels
because an FDB entry is learned despite the presence of a tc filter that
redirects incoming traffic [1].
I am unable to reproduce the failure locally, but I can see how it can
happen given that learning is first enabled and only then the ingress tc
filter is configured. On debug kernels the time window between these two
operations is longer compared to regular kernels, allowing random
packets to be transmitted and trigger learning.
Fix by reversing the order and configure the ingress tc filter before
enabling learning.
[1]
[...]
# TEST: Locked port MAB redirect [FAIL]
# Locked entry created for redirected traffic
Fixes: 38c43a1ce7 ("selftests: forwarding: Add test case for traffic redirection from a locked port")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suppress the following grep warnings:
[...]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv4 (*, G) port group entries configuration tests [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv6 (*, G) port group entries configuration tests [ OK ]
[...]
They do not fail the test, but do clutter the output.
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: IPv4 host entries forwarding tests [FAIL]
# Packet locally received after flood
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: L2 miss - Multicast (IPv4) [FAIL]
# Unregistered multicast filter was hit after adding MDB entry
Fixes: 8c33266ae2 ("selftests: forwarding: Add layer 2 miss test cases")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test toggles the carrier of a bridge port in order to test the
bridge backup port feature.
Due to the linkwatch delayed work the carrier change is not always
reflected fast enough to the bridge driver and packets are not forwarded
as the test expects, resulting in failures [1].
Fix by busy waiting on the bridge port state until it changes to the
desired state following the carrier change.
[1]
# Backup port
# -----------
[...]
# TEST: swp1 carrier off [ OK ]
# TEST: No forwarding out of swp1 [FAIL]
[ 641.995910] br0: port 1(swp1) entered disabled state
# TEST: No forwarding out of vx0 [ OK ]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208123110.1063930-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Space reservations for metadata are, most of the time, pessimistic as we
reserve space for worst possible cases - where tree heights are at the
maximum possible height (8), we need to COW every extent buffer in a tree
path, need to split extent buffers, etc.
For data, we generally reserve the exact amount of space we are going to
allocate. The exception here is when using compression, in which case we
reserve space matching the uncompressed size, as the compression only
happens at writeback time and in the worst possible case we need that
amount of space in case the data is not compressible.
This means that when there's not available space in the corresponding
space_info object, we may need to allocate a new block group, and then
that block group might not be used after all. In this case the block
group is never added to the list of unused block groups and ends up
never being deleted - except if we unmount and mount again the fs, as
when reading block groups from disk we add unused ones to the list of
unused block groups (fs_info->unused_bgs). Otherwise a block group is
only added to the list of unused block groups when we deallocate the
last extent from it, so if no extent is ever allocated, the block group
is kept around forever.
This also means that if we have a bunch of tasks reserving space in
parallel we can end up allocating many block groups that end up never
being used or kept around for too long without being used, which has
the potential to result in ENOSPC failures in case for example we over
allocate too many metadata block groups and then end up in a state
without enough unallocated space to allocate a new data block group.
This is more likely to happen with metadata reservations as of kernel
6.7, namely since commit 28270e25c6 ("btrfs: always reserve space for
delayed refs when starting transaction"), because we started to always
reserve space for delayed references when starting a transaction handle
for a non-zero number of items, and also to try to reserve space to fill
the gap between the delayed block reserve's reserved space and its size.
So to avoid this, when finishing the creation a new block group, add the
block group to the list of unused block groups if it's still unused at
that time. This way the next time the cleaner kthread runs, it will delete
the block group if it's still unused and not needed to satisfy existing
space reservations.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before deleting a block group that is in the list of unused block groups
(fs_info->unused_bgs), we check if the block group became used before
deleting it, as extents from it may have been allocated after it was added
to the list.
However even if the block group was not yet used, there may be tasks that
have only reserved space and have not yet allocated extents, and they
might be relying on the availability of the unused block group in order
to allocate extents. The reservation works first by increasing the
"bytes_may_use" field of the corresponding space_info object (which may
first require flushing delayed items, allocating a new block group, etc),
and only later a task does the actual allocation of extents.
For metadata we usually don't end up using all reserved space, as we are
pessimistic and typically account for the worst cases (need to COW every
single node in a path of a tree at maximum possible height, etc). For
data we usually reserve the exact amount of space we're going to allocate
later, except when using compression where we always reserve space based
on the uncompressed size, as compression is only triggered when writeback
starts so we don't know in advance how much space we'll actually need, or
if the data is compressible.
So don't delete an unused block group if the total size of its space_info
object minus the block group's size is less then the sum of used space and
space that may be used (space_info->bytes_may_use), as that means we have
tasks that reserved space and may need to allocate extents from the block
group. In this case, besides skipping the deletion, re-add the block group
to the list of unused block groups so that it may be reconsidered later,
in case the tasks that reserved space end up not needing to allocate
extents from it.
Allowing the deletion of the block group while we have reserved space, can
result in tasks failing to allocate metadata extents (-ENOSPC) while under
a transaction handle, resulting in a transaction abort, or failure during
writeback for the case of data extents.
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a helper function to determine if a block group is being used and make
use of it at btrfs_delete_unused_bgs(). This helper will also be used in
future code changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While running the CI for an unrelated change I hit the following panic
with generic/648 on btrfs_holes_spacecache.
assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1385!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1
RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0
Call Trace:
<TASK>
extent_write_cache_pages+0x2ac/0x8f0
extent_writepages+0x87/0x110
do_writepages+0xd5/0x1f0
filemap_fdatawrite_wbc+0x63/0x90
__filemap_fdatawrite_range+0x5c/0x80
btrfs_fdatawrite_range+0x1f/0x50
btrfs_write_out_cache+0x507/0x560
btrfs_write_dirty_block_groups+0x32a/0x420
commit_cowonly_roots+0x21b/0x290
btrfs_commit_transaction+0x813/0x1360
btrfs_sync_file+0x51a/0x640
__x64_sys_fdatasync+0x52/0x90
do_syscall_64+0x9c/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
This happens because we fail to write out the free space cache in one
instance, come back around and attempt to write it again. However on
the second pass through we go to call btrfs_get_extent() on the inode to
get the extent mapping. Because this is a new block group, and with the
free space inode we always search the commit root to avoid deadlocking
with the tree, we find nothing and return a EXTENT_MAP_HOLE for the
requested range.
This happens because the first time we try to write the space cache out
we hit an error, and on an error we drop the extent mapping. This is
normal for normal files, but the free space cache inode is special. We
always expect the extent map to be correct. Thus the second time
through we end up with a bogus extent map.
Since we're deprecating this feature, the most straightforward way to
fix this is to simply skip dropping the extent map range for this failed
range.
I shortened the test by using error injection to stress the area to make
it easier to reproduce. With this patch in place we no longer panic
with my error injection test.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The two tests that make use of multicast routig (router.sh and
router_multicast.sh) are currently failing in the netdev CI because the
kernel is missing multicast routing support.
Fix by adding the required config entries.
Fixes: 6d4efada3b ("selftests: forwarding: Add multicast routing test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208165538.1303021-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* A fix for a missing TLB flush during early boot on SPARSEMEM_VMEMMAP
configurations.
* A handful of fixes to correctly implement the break-before-make
behavior requried by the ISA for NAPOT mappings.
* A fix for a missing TLB flush on intermediate mapping changes.
* A fix for a build warning about a missing declaration of
overflow_stack.
* A fix for a performace regression related to incorrect tracking of
completed batch TLB flushes.
-----BEGIN PGP SIGNATURE-----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=CvsK
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix missing TLB flush during early boot on SPARSEMEM_VMEMMAP
configurations
- fixes to correctly implement the break-before-make behavior requried
by the ISA for NAPOT mappings
- fix a missing TLB flush on intermediate mapping changes
- fix build warning about a missing declaration of overflow_stack
- fix performace regression related to incorrect tracking of completed
batch TLB flushes
* tag 'riscv-for-linus-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix arch_tlbbatch_flush() by clearing the batch cpumask
riscv: declare overflow_stack as exported from traps.c
riscv: Fix arch_hugetlb_migration_supported() for NAPOT
riscv: Flush the tlb when a page directory is freed
riscv: Fix hugetlb_mask_last_page() when NAPOT is enabled
riscv: Fix set_huge_pte_at() for NAPOT mapping
riscv: mm: execute local TLB flush after populating vmemmap
