kmalloc_array() without __GFP_ZERO flag does not initialize
memory to zero. This causes issues. Use kcalloc() for maps and
bitmap_zalloc() for bitmaps.
Fixes: dd78428786 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Brett Creeley <bcreeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206024000.1070260-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I have a CD copy of the original Tom Clancy's Ghost Recon game from
2001. The disc mounts without error on Windows, but on Linux mounting
fails with the message "isofs_fill_super: get root inode failed". The
error originates in isofs_read_inode, which returns -EIO because de_len
is 0. The superblock on this disc appears to be intentionally corrupt as
a form of copy protection.
When the root inode is unusable, instead of giving up immediately, try
to continue with the Joliet file table. This fixes the Ghost Recon CD
and probably other copy-protected CDs too.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240208022134.451490-1-alexhenrie24@gmail.com>
The QCM6490 Linux Android firmware needs this workaround as well. Add it
to the list.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240208-fp5-pmic-glink-v2-2-4837d4abd5a4@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the QCM6490 compatible used to describe the pmic glink on this
platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240208-fp5-pmic-glink-v2-1-4837d4abd5a4@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below commit introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
When cpsw resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:
WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x24/0x2c
dump_stack_lvl from __warn+0x84/0x15c
__warn from warn_slowpath_fmt+0x1a8/0x1c8
warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
dpm_run_callback from device_resume+0xb8/0x2b8
device_resume from dpm_resume+0x144/0x314
dpm_resume from dpm_resume_end+0x14/0x20
dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
pm_suspend from state_store+0x74/0xd0
state_store from kernfs_fop_write_iter+0x104/0x1ec
kernfs_fop_write_iter from vfs_write+0x1b8/0x358
vfs_write from ksys_write+0x78/0xf8
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66
Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The below commit introduced a WARN when phy state is not in the states:
PHY_HALTED, PHY_READY and PHY_UP.
commit 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
When cpsw_new resumes, there have port in PHY_NOLINK state, so the below
warning comes out. Set mac_managed_pm be true to tell mdio that the phy
resume/suspend is managed by the mac, to fix the following warning:
WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144
CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x24/0x2c
dump_stack_lvl from __warn+0x84/0x15c
__warn from warn_slowpath_fmt+0x1a8/0x1c8
warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144
mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140
dpm_run_callback from device_resume+0xb8/0x2b8
device_resume from dpm_resume+0x144/0x314
dpm_resume from dpm_resume_end+0x14/0x20
dpm_resume_end from suspend_devices_and_enter+0xd0/0x924
suspend_devices_and_enter from pm_suspend+0x2e0/0x33c
pm_suspend from state_store+0x74/0xd0
state_store from kernfs_fop_write_iter+0x104/0x1ec
kernfs_fop_write_iter from vfs_write+0x1b8/0x358
vfs_write from ksys_write+0x78/0xf8
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xe094dfa8 to 0xe094dff0)
dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001
dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000
dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66
Cc: <stable@vger.kernel.org> # v6.0+
Fixes: 744d23c71a ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit bd077259d0 ("drm/i915/vdsc: Add function to read any PPS
register") defines a new macro to calculate the DSC PPS register
addresses with PPS number as an input. This macro correctly calculates
the addresses till PPS 11 since the addresses increment by 4. So in that
case the following macro works correctly to give correct register
address:
_MMIO(_DSCA_PPS_0 + (pps) * 4)
However after PPS 11, the register address for PPS 12 increments by 12
because of RC Buffer memory allocation in between. Because of this
discontinuity in the address space, the macro calculates wrong addresses
for PPS 12 - 16 resulting into incorrect DSC PPS parameter value
read/writes causing DSC corruption.
This fixes it by correcting this macro to add the offset of 12 for PPS
>=12.
v3: Add correct paranthesis for pps argument (Jani Nikula)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10172
Fixes: bd077259d0 ("drm/i915/vdsc: Add function to read any PPS register")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205204619.1991673-1-navaremanasi@chromium.org
It's useful to have the device type information for those sub-devices
that are actually GPIO chips registered with GPIOLIB. While at it: use
the device type struct to setup the release callback which is the
preferred way to use the device API.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 48e1b4d369 ("gpiolib: remove the GPIO device from the list
when it's unregistered") we remove the GPIO device entry from the global
list (used to order devices by their GPIO ranges) when unregistering the
chip, not when releasing the device. It will not happen when the last
reference is put anymore. This means, we need to remove it in error path
in gpiochip_add_data_with_key() unconditionally, without checking if the
device's .release() callback is set.
Fixes: 48e1b4d369 ("gpiolib: remove the GPIO device from the list when it's unregistered")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This has slipped through when reducing memory footprint for set
elements, remove it.
Fixes: 9dad402b89 ("netfilter: nf_tables: expose opaque set element as struct nft_elem_priv")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, it is possible to create an idmapped mount using a user
namespace without any mappings. However, this yields an idmapped
mount that doesn't actually map the ids. With the following change,
it will no longer be possible to create an idmapped mount when using
a user namespace with no mappings, and will instead return EINVAL,
an “invalid argument” error code.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Taylor Jackson <taylor.a.jackson@me.com>
Link: https://lore.kernel.org/r/20240208-mnt-idmap-inval-v2-1-58ef26d194e0@me.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since eventfd's document has clearly stated: A write(2) call adds
the 8-byte integer value supplied in its buffer to the counter.
However, in the current implementation, the following code snippet
did not cause an error:
char str[16] = "hello world";
uint64_t value;
ssize_t size;
int fd;
fd = eventfd(0, 0);
size = write(fd, &str, strlen(str));
printf("eventfd: test writing a string, size=%ld\n", size);
size = read(fd, &value, sizeof(value));
printf("eventfd: test reading as uint64, size=%ld, valus=0x%lX\n",
size, value);
close(fd);
And its output is:
eventfd: test writing a string, size=8
eventfd: test reading as uint64, size=8, valus=0x6F77206F6C6C6568
By checking whether count is equal to sizeof(ucnt), such errors
could be detected. It also follows the requirements of the manual.
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Link: https://lore.kernel.org/r/tencent_10AAA44731FFFA493F9F5501521F07DD4D0A@qq.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
TEST_VM_ASYNC_OPS_ERROR is broken and unused. Remove for now and will
pull back in a later time when it is used, fixed, and properly hidden
behind a Kconfig option. Also fixup the supported flags value.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240206045010.2981051-1-matthew.brost@intel.com
(cherry picked from commit d9890c028d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If GUP fails and we are in_kthread, we can have pinned = 0 and ret = 0.
If that happens we call sg_alloc_append_table_from_pages() with n_pages
= 0, which is not well behaved and can trigger:
kernel BUG at include/linux/scatterlist.h:115!
depending on if the pages array happens to be zeroed or not. Even if we
don't hit that it crashes later when trying to dma_map the returned
table.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202171435.427630-2-matthew.auld@intel.com
(cherry picked from commit 8087199cd5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The calculation to determine max page size of a VMA during a REMAP
operations assumes the VMA has been bound. This assumption is not true
if the VMA is from an eariler operation in an array of binds. If a VMA
has not been bound use the maximum page size which will ensure the
previous / next REMAP operations are not incorrectly skipped.
Fixes: 8f33b4f054 ("drm/xe: Avoid doing rebinds")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205231714.2956225-1-matthew.brost@intel.com
(cherry picked from commit 5ad6af5c91)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
intel_power_domains_init is called twice in xe_device_probe:
1) intel_power_domains_init()
xe_display_init_nommio()
xe_device_probe()
2) intel_power_domains_init()
intel_display_driver_probe_noirq()
xe_display_init_noirq()
xe_device_probe()
It needs remove one to avoid power_domains->power_wells double malloc.
unreferenced object 0xffff88811150ee00 (size 512):
comm "systemd-udevd", pid 506, jiffies 4294674198 (age 3605.560s)
hex dump (first 32 bytes):
10 b4 9d a0 ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8134b901>] __kmem_cache_alloc_node+0x1c1/0x2b0
[<ffffffff812c98b2>] __kmalloc+0x52/0x150
[<ffffffffa08b0033>] __set_power_wells+0xc3/0x360 [xe]
[<ffffffffa08562fc>] xe_display_init_nommio+0x4c/0x70 [xe]
[<ffffffffa07f0d1c>] xe_device_probe+0x3c/0x5a0 [xe]
[<ffffffffa082e48f>] xe_pci_probe+0x33f/0x5a0 [xe]
[<ffffffff817f2187>] local_pci_probe+0x47/0xa0
[<ffffffff817f3db3>] pci_device_probe+0xc3/0x1f0
[<ffffffff8192f2a2>] really_probe+0x1a2/0x410
[<ffffffff8192f598>] __driver_probe_device+0x78/0x160
[<ffffffff8192f6ae>] driver_probe_device+0x1e/0x90
[<ffffffff8192f92a>] __driver_attach+0xda/0x1d0
[<ffffffff8192c95c>] bus_for_each_dev+0x7c/0xd0
[<ffffffff8192e159>] bus_add_driver+0x119/0x220
[<ffffffff81930d00>] driver_register+0x60/0x120
[<ffffffffa05e50a0>] 0xffffffffa05e50a0
The call to intel_power_domains_cleanup() needs to stay where it is for
now. The main issue is that while the init is called by the display
side, shared by i915 and xe, the cleanup is called by a non-shared code
path. Fixing that will be done as a separate commit.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Xiaoming Wang <xiaoming.wang@intel.com>
[ reword commit message and explain why the fini needs to stay
where it is ]
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202215658.561298-1-lucas.demarchi@intel.com
(cherry picked from commit 86c99abb5f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
For integrated devices we need to map both mem.kernel_bb_pool and
usm.bb_pool to be able to run batches from both pools.
Fixes: a682b6a42d ("drm/xe: Support device page faults on integrated platforms")
Tested-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202033440.2351862-1-matthew.brost@intel.com
(cherry picked from commit 72f86ed3c8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
gcc-13 warns about an array overflow that it sees but that is
prevented by the "asid % NUM_PF_QUEUE" calculation:
drivers/gpu/drm/xe/xe_gt_pagefault.c: In function 'xe_guc_pagefault_handler':
include/linux/fortify-string.h:57:33: error: writing 16 bytes into a region of size 0 [-Werror=stringop-overflow=]
include/linux/fortify-string.h:689:26: note: in expansion of macro '__fortify_memcpy_chk'
689 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_gt_pagefault.c:341:17: note: in expansion of macro 'memcpy'
341 | memcpy(pf_queue->data + pf_queue->tail, msg, len * sizeof(u32));
| ^~~~~~
drivers/gpu/drm/xe/xe_gt_types.h:102:25: note: at offset [1144, 265324] into destination object 'tile' of size 8
I found that rewriting the assignment using pointer addition rather than the
equivalent array index calculation prevents the warning, so use that instead.
I sent a bug report against gcc for the false positive warning.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113214
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103114819.2913937-1-arnd@kernel.org
(cherry picked from commit 774ef5dfc9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
A REMAP op is composed of 3 VMA's - unmap, prev map, and next map. When
op_execute fails with -EAGAIN we need to update the local VMA pointer to
the current op state and then repin the VMA if it is a userptr.
Fixes a failure seen in xe_vm.munmap-style-unbind-userptr-one-partial.
Fixes: b06d47be7c ("drm/xe: Port Xe to GPUVA")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201004849.2219558-3-matthew.brost@intel.com
(cherry picked from commit 447f74d223)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Take a reference in xe_exec_queue_last_fence_get(). Also fix a reference
counting underflow bug VM bind and unbind.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201004849.2219558-2-matthew.brost@intel.com
(cherry picked from commit a856b67a84)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The logic for the unwind loop is incorrect resulting in an infinite
loop. Fix to unwind to go from the last operations list to he first.
Fixes: 617eebb9c4 ("drm/xe: Fix array of binds")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201175532.2303168-1-matthew.brost@intel.com
(cherry picked from commit 3acc1ff1a7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Document support for the I2C Bus Interfaces in the Renesas R-Car V4M
(R8A779H0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The driver receives the tx fifo almost empty(aempty) interrupt and
reads the tx_aempty_int_mstat to start a round of data transfer.
The operation of clearing the TX aempty interrupt after completing
a write cycle is added to ensure that the FIFO is truly at almost
empty status when an aempty interrupt is received.
The threshold for fifo almost empty interrupt is defined as 1.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The driver finishes a write cycle by read the fifo tx full status
or write limit decrease to 0. The driver starts to write data to
the FIFO after the I2C FIFO almost empty interrupt is reported.
The threshold for FIFO almost empty interrupt is that the amount
of data in the FIFO is less than or equal to 1.
Reduce write maxwrite to the fifo depth - aempty interrupt
threshold. Limiting the number of data to be written at a time
to remaining fifo capacity.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Switch the R-Mobile A1, R-Mobile APE6, and SH-Mobile AG5 SoCs to the new
frequency calculation formula, to (a) avoid running the I2C bus too fast,
and (b) bring the low/high ratio closer to the recommended ratio 5/4.
As this makes fast_clock_dt_config and v2_freq_calc_dt_config identical,
merge them into a single fast_clock_dt_config.
Legacy SH users (sh7343, sh7366, and sh772[234]) are left alone, and
still use the old formula.
Measurement results on R-Mobile APE6 and SH-Mobile AG5 (fck=104 MHz,
clks_per_count=2):
100 kHz: 106 kHz LH=1.12 before, 99.6 kHz L/H=1.22 after
400 kHz: 384 kHz LH=1.67 before, 392 kHz L/H=1.27 after
Measurement results on R-Mobile A1 (fck=49.5 MHz, clks_per_count=1):
100 kHz: 106 kHz L/H=1.09 before, 99.6 kHz L/H=1.20 after
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Starting with
commit 75820314de ("i2c: core: add generic I2C GPIO recovery")
GPIO bus recovery is supported by the I2C core, so we can remove the
driver implementation and use that one instead.
As a nice side-effect, pinctrl becomes optional, allowing bus recovery on
LS1021A, which does not have such luxury, but can be wired up to use extra
fixed GPIO pins.
Note: The previous error messages about bus recovery not being supported is
dropped with this change. Given that it is perfectly possible to have platforms
where bus recovery works without pinctrl support, I happen to work on one such,
both error messages does not really make sense in those cases. And I don't see
how to know if this is the case or not.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Enable additional features based on DT settings and unconditionally
release the shared interrupt pin after 1.6 seconds and allow to use
it as reset.
These features aren't enabled by default and it's up to board designer
to validate for proper functioning and detection of devices in secondary
bus as sometimes it can cause secondary bus being disabled.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Maxim Max7357 has a configuration register to enable additional
features. These features aren't enabled by default & its up to
board designer to enable the same as it may have unexpected side effects.
These should be validated for proper functioning & detection of devices
in secondary bus as sometimes it can cause secondary bus being disabled.
Add booleans for:
- maxim,isolate-stuck-channel
- maxim,send-flush-out-sequence
- maxim,preconnection-wiggle-test-enable
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
This bus has three USB-related devices attached to it:
0x25: Maxim 77759 Type-C port controller
0x35: Maxim 20339EWB Surge protection IC
0x36: Maxim 77759 Fuel gauge
0x57: NXP PCA9468 Battery charger
0x66: Maxim 77759 PMIC
0x69: Maxim 77759 Charger
where the Maxim 77759 has multiple i2c slave addresses.
These don't have (upstream) Linux drivers yet, but nevertheless we can
enable the bus so as to allow working on them (and to make i2cdetect /
i2cdump / etc. work).
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-8-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On the gs101-oriole board, i2c bus 12 has various USB-related
controllers attached to it.
Note the selection of the USI protocol is intentionally left for the
board dts file.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-7-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
submit_flushes
atomic_set(&mddev->flush_pending, 1);
rdev_for_each_rcu(rdev, mddev)
atomic_inc(&mddev->flush_pending);
bi->bi_end_io = md_end_flush
submit_bio(bi);
/* flush io is done first */
md_end_flush
if (atomic_dec_and_test(&mddev->flush_pending))
percpu_ref_put(&mddev->active_io)
-> active_io is not released
if (atomic_dec_and_test(&mddev->flush_pending))
-> missing release of active_io
For consequence, mddev_suspend() will wait for 'active_io' to be zero
forever.
Fix this problem by releasing 'active_io' in submit_flushes() if
'flush_pending' is decreased to zero.
Fixes: fa2bbff7b0 ("md: synchronize flush io with array reconfiguration")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Blazej Kucman <blazej.kucman@linux.intel.com>
Closes: https://lore.kernel.org/lkml/20240130172524.0000417b@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-7-yukuai1@huaweicloud.com
Enable the cmu-peric1 clock controller. It feeds additional USI, I3C
and PWM interfaces / busses.
Note that &sysreg_peric1 needs a clock to be able to access its
registers and now that Linux knows about this clock, we need to add it
in this commit as well so as to keep &sysreg_peric1 working, so that
the clock can be enabled as and when needed.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201161258.1013664-6-andre.draszik@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The Devicetree binding headers for Samsung Exynos and Google GS101 clock
controllers, used by the Samsung clock controller drivers.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmXDomAQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD15RVD/47GXcMhrlxZ6dR+r2Ym6sBzpkGl44Qz4b6
i+N/7mXVqpOAnNvxMd3i/0ZjOZJR4HO2xKmUJ2IGSZlNDmF57e+Uagd0Wf4NCr24
V87R1Fu96hIKkHpSbPZB9jDv03YLPK/qw8k/zfEE88Dbgkzp3B+aL+XiK49hiESs
/lFIxMwcGgpGLJq7SPADSmRF9eeZQ6S90rZblMJT0i6zXT/m3hWw4cwxPLVuNktH
YBJuhwYA1ZQ+/vLif0PIN9NvgTmTS/NbLznE2HrKZZs2Uc7zwCiw0zeLB82OhMLM
meSEc2qoGBEpZrrZWUn3jSIEcjcagLHpzLgZ8D6OWuYaLOyfBN3lz3S3mO5BEJOi
eBClaSGu6KGo6gNUh4X4X5Ja5G00rlc+zvC9OuOmXTsM//1njwJaeb34REwjvaWq
meOgmr4xKFfVJS8k324xWE5ieADNfPxbcL7855oz6JVMti3KG9SkpFr6o1OObAGm
jlvuZV0hMiRXHxSUkjsluHVLTVm5AVLaBwTD1abwLoq/xpy0m68Ib9fl2/3CcrQp
U7fKOCW7/aDbnq3bg++xxlhX/iyx7R0RBRRVetnqPvqtln7FyNiLvKV0nG08D0da
8F7p0DHfwIY15vAXV+YFqDFfOHtUyXdorcly2i7ezFsKFxjOVxGwg+0DZINUFuJp
ONoXM/q7Qg==
=TjPm
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-bindings-clk-6.9-3' into next/dt64
dt-bindings for Google GS101 clock controllers for v6.9
The Devicetree binding headers for Samsung Exynos and Google GS101 clock
controllers, used by the Samsung clock controller drivers.
older NULL-pointer dereference in ccp.
-----BEGIN PGP SIGNATURE-----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=sqpx
-----END PGP SIGNATURE-----
Merge tag 'v6.8-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix regressions in cbc and algif_hash, as well as an older
NULL-pointer dereference in ccp"
* tag 'v6.8-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_hash - Remove bogus SGL free on zero-length error path
crypto: cbc - Ensure statesize is zero
crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked
According to a syzbot report, end_buffer_async_write(), which handles the
completion of block device writes, may detect abnormal condition of the
buffer async_write flag and cause a BUG_ON failure when using nilfs2.
Nilfs2 itself does not use end_buffer_async_write(). But, the async_write
flag is now used as a marker by commit 7f42ec3941 ("nilfs2: fix issue
with race condition of competition between segments for dirty blocks") as
a means of resolving double list insertion of dirty blocks in
nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the
resulting crash.
This modification is safe as long as it is used for file data and b-tree
node blocks where the page caches are independent. However, it was
irrelevant and redundant to also introduce async_write for segment summary
and super root blocks that share buffers with the backing device. This
led to the possibility that the BUG_ON check in end_buffer_async_write
would fail as described above, if independent writebacks of the backing
device occurred in parallel.
The use of async_write for segment summary buffers has already been
removed in a previous change.
Fix this issue by removing the manipulation of the async_write flag for
the remaining super root block buffer.
Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com
Fixes: 7f42ec3941 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface's update_schemes_tried_regions command has a timeout
of two apply intervals of the DAMOS scheme. Having zero value DAMOS
scheme apply interval means it will use the aggregation interval as the
value. However, the timeout setup logic is mistakenly using the sampling
interval insted of the aggregartion interval for the case. This could
cause earlier-than-expected timeout of the command. Fix it.
Link: https://lkml.kernel.org/r/20240202191956.88791-1-sj@kernel.org
Fixes: 7d6fa31a2f ("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syzbot reported a hang issue in migrate_pages_batch() called by mbind()
and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2.
While migrate_pages_batch() locks a folio and waits for the writeback to
complete, the log writer thread that should bring the writeback to
completion picks up the folio being written back in
nilfs_lookup_dirty_data_buffers() that it calls for subsequent log
creation and was trying to lock the folio. Thus causing a deadlock.
In the first place, it is unexpected that folios/pages in the middle of
writeback will be updated and become dirty. Nilfs2 adds a checksum to
verify the validity of the log being written and uses it for recovery at
mount, so data changes during writeback are suppressed. Since this is
broken, an unclean shutdown could potentially cause recovery to fail.
Investigation revealed that the root cause is that the wait for writeback
completion in nilfs_page_mkwrite() is conditional, and if the backing
device does not require stable writes, data may be modified without
waiting.
Fix these issues by making nilfs_page_mkwrite() wait for writeback to
finish regardless of the stable write requirement of the backing device.
Link: https://lkml.kernel.org/r/20240131145657.4209-1-konishi.ryusuke@gmail.com
Fixes: 1d1d1a7672 ("mm: only enforce stable page writes if the backing device requires it")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ee2ae68da3b22d04cd8d@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/00000000000047d819061004ad6c@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I will lose access to my @linaro.org email address next week, update the
MAINTAINERS file and map it in .mailmap with the new email address.
Link: https://lkml.kernel.org/r/20240201021022.886-1-leo.yan@linux.dev
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
LRU_SKIP can only be returned if we don't ever dropped lru lock, or we
need to return LRU_RETRY to restart from the head of lru list.
Otherwise, the iteration might continue from a cursor position that was
freed while the locks were dropped.
Actually we may need to introduce another LRU_STOP to really terminate the
ongoing shrinking scan process, when we encounter a warm page already in
the swap cache. The current list_lru implementation doesn't have this
function to early break from __list_lru_walk_one.
Link: https://lkml.kernel.org/r/20240126-zswap-writeback-race-v2-1-b10479847099@bytedance.com
Fixes: b5ba474f3f ("zswap: shrink zswap pool based on memory pressure")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chris Li <chriscli@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add current email address as QUIC email is no longer active.
Link: https://lkml.kernel.org/r/20240131034311.46706-1-john@jmoon.dev
Signed-off-by: John Moon <john@jmoon.dev>
Acked-by: Trilok Soni <quic_tsoni@quicinc.com>
Cc: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the per-memcg LRU universe, LRU removal uses entry->objcg to determine
which list count needs to be decreased. Drop the objcg reference after
updating the LRU, to fix a possible use-after-free.
Link: https://lkml.kernel.org/r/20240130013438.565167-1-hannes@cmpxchg.org
Fixes: a65b0e7607 ("zswap: make shrinking memcg-aware")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We need to leave lazy MMU mode before unlocking.
Link: https://lkml.kernel.org/r/20240126032608.355899-1-senozhatsky@chromium.org
Fixes: b2f557a21b ("mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jiexun Wang <wangjiexun@tinylab.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The change [1] missed ARM architecture when fixing major fault accounting
for page fault retry under per-VMA lock.
The user-visible effects is that it restores correct major fault
accounting that was broken after [2] was merged in 6.7 kernel. The
more detailed description is in [3] and this patch simply adds the
same fix to ARM architecture which I missed in [3].
Add missing code to fix ARM architecture fault accounting.
[1] 46e714c729 ("arch/mm/fault: fix major fault accounting when retrying under per-VMA lock")
[2] https://lore.kernel.org/all/20231006195318.4087158-6-willy@infradead.org/
[3] https://lore.kernel.org/all/20231226214610.109282-1-surenb@google.com/
Link: https://lkml.kernel.org/r/20240123064305.2829244-1-surenb@google.com
Fixes: 12214eba19 ("mm: handle read faults under the VMA lock")
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
