Add the toradex,apalis-imx8-eval-v1.2 and
toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2
of the Apalis Evaluation Board.
Version v1.2 includes the following changes compared to v1.1:
- 8-bit MMC connector replaced with a 4-bit uSD connector.
- Audio codec NAU88C22 added.
- M24C02 EEPROM i2c added.
- MIPI-CSI-2 connector directly to the board added.
- PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
PCIe connector.
- Power measurement IC INA219 added.
- Replaced DVI with HDMI connector.
- Single-channel USB to UART converter replaced with four-channel USB
to UART/JTAG.
- Temperature sensor TMP75 added.
Please note that board version v1.0 (which reached EOL) is compatible with
v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval
compatible strings should be used for both v1.0 and v1.1.
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-11-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-11-aford173@gmail.com
Some USI blocks can be configured as SPI controllers. Add corresponding
SPI nodes to Exynos850 SoC device tree.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240201183025.14566-1-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
syzbot reported the following general protection fault [1]:
general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
<TASK>
tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.
tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.
This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().
Fixes: ef20cd4dd1 ("tipc: introduce UDP replicast")
Reported-and-tested-by: syzbot+5142b87a9abc510e14fa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5142b87a9abc510e14fa [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20240131152310.4089541-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The vf610 gpio driver is used in i.MX8QM, DXL, ULP and i.MX93 chips.
Enable it in arm64 defconfig.
(vf610 gpio used to be enabled by default for all i.MX chips. This was
changed recently as most i.MX chips don't need this driver.)
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vf610 gpio driver is used in i.MX7ULP chips (Cortex A7, ARMv7-A
architecture). Enable it in imx_v6_v7_defconfig.
(vf610 gpio used to be enabled by default for all i.MX chips. This was
changed recently as most i.MX chips don't need this driver.)
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the new Apalis Evaluation Board v1.2. Because
only the imx6q-apalis-eval.dts was available, the imx6q-apalis-eval.dtsi
has been created which has common hardware configurations for v1.0, v1.1
and v1.2. Both imx6q-apalis-eval.dts and imx6q-apalis-eval-v1.2.dts
files include imx6q-apalis-eval.dtsi.
Versions 1.0 and 1.1 are compatible with each other and should
use imx6q-apalis-eval.dts file. Now for v1.2, the new device-tree file
should be used.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Two serious ones here that we'll want to backport to stable: a fix for a
race in the thread_with_file code, and another locking fixup in the
subvolume deletion path.
-----BEGIN PGP SIGNATURE-----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=iour
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-02-05' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Two serious ones here that we'll want to backport to stable: a fix for
a race in the thread_with_file code, and another locking fixup in the
subvolume deletion path"
* tag 'bcachefs-2024-02-05' of https://evilpiepirate.org/git/bcachefs:
bcachefs: time_stats: Check for last_event == 0 when updating freq stats
bcachefs: install fd later to avoid race with close
bcachefs: unlock parent dir if entry is not found in subvolume deletion
bcachefs: Fix build on parisc by avoiding __multi3()
Add the toradex,apalis_imx6q-eval-v1.2 compatible string for version 1.2
of the Apalis Evaluation Board.
Version v1.2 includes the following changes compared to v1.1:
- 8-bit MMC connector replaced with a 4-bit uSD connector.
- Audio codec NAU88C22 added.
- M24C02 EEPROM i2c added.
- MIPI-CSI-2 connector directly to the board added.
- PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
PCIe connector.
- Power measurement IC INA219 added.
- Replaced DVI with HDMI connector.
- Single-channel USB to UART converter replaced with four-channel USB
to UART/JTAG.
- Temperature sensor TMP75 added.
Please note that version v1.0 (which reached EOL) is compatible with
v1.1, therefore toradex,apalis_imx6q-eval compatible string should be
used for both v1.0 and v1.1.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add aliases for all ethernet nodes including the switch. It makes it
easier to find this nodes by the boot loader.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This change adds ftrace support for following functions which
helps in debugging the issues when there is Channel state & MHI
state change and also when we receive data and control events:
1. mhi_intvec_mhi_states
2. mhi_process_data_event_ring
3. mhi_process_ctrl_ev_ring
4. mhi_gen_tre
5. mhi_update_channel_state
6. mhi_tryset_pm_state
7. mhi_pm_st_worker
Change the implementation of the arrays which has enum to strings mapping
to make it consistent in both trace header file and other files.
Where ever the trace events are added, debug messages are removed.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240206-ftrace_support-v11-1-3f71dc187544@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Fix DWC3 USB VBUS glitch issue.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add compatible string fsl,ls1012a-i2c and scl-gpios to support i2c bus
recovery when I2C bus lock by i2c devices.
[Leo: updated scl-gpios to match RM ]
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Correct the size of dcfg block to 4k.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the range parsing was open-coded the number of u32 entries to
parse had to be a multiple of 4 and the driver checks this. With
the range parsing converted to the range parser the counting changes
from individual u32 entries to a complete range, so the check must
not reject counts not divisible by 4.
Fixes: 2a88e4792c ("bus: imx-weim: Remove open coded "ranges" parsing")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vDSO executes in userspace, so the kernel's UBSAN should not
instrument it. Solves these kind of build errors:
loongarch64-linux-ld: arch/loongarch/vdso/vgettimeofday.o: in function `vdso_shift_ns':
lib/vdso/gettimeofday.c:23:(.text+0x3f8): undefined reference to `__ubsan_handle_shift_out_of_bounds'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401310530.lZHCj1Zl-lkp@intel.com/
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Fangrui Song <maskray@google.com>
Cc: loongarch@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The earlycon parameter is based on fixmap, and fixmap addresses are not
supposed to be shadowed by KASAN. So return the kasan_early_shadow_page
in kasan_mem_to_shadow() if the input address is above FIXADDR_START.
Otherwise earlycon cannot work after kasan_init().
Cc: stable@vger.kernel.org
Fixes: 5aa4ac64e6 ("LoongArch: Add KASAN (Kernel Address Sanitizer) support")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch missed the refactoring made by commit 282a181b1a ("seccomp:
Move config option SECCOMP to arch/Kconfig") because LoongArch was not
mainlined at that time.
The 'depends on PROC_FS' statement is stale as described in that commit.
Select HAVE_ARCH_SECCOMP, and remove the duplicated config entry.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For suspend to ram on j7200, use ti,j7200-padconf compatible to save and
restore pinctrl contexts.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-3-704e7dc24460@bootlin.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Mark dynptr kfuncs as __weak to allow
verifier_global_subprogs/arg_ctx_{perf,kprobe,raw_tp} subtests to be
loadable on old kernels. Because bpf_dynptr_from_xdp() kfunc is used
from arg_tag_dynptr BPF program in progs/verifier_global_subprogs.c
*and* is not marked as __weak, loading any subtest from
verifier_global_subprogs fails on old kernels that don't have
bpf_dynptr_from_xdp() kfunc defined. Even if arg_tag_dynptr program
itself is not loaded, libbpf bails out on non-weak reference to
bpf_dynptr_from_xdp (that can't be resolved), which shared across all
programs in progs/verifier_global_subprogs.c.
So mark all dynptr-related kfuncs as __weak to unblock libbpf CI ([0]).
In the upcoming "kfunc in vmlinux.h" work we should make sure that
kfuncs are always declared __weak as well.
[0] https://github.com/libbpf/libbpf/actions/runs/7792673215/job/21251250831?pr=776#step:4:7961
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206004008.1541513-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
K3 Remoteproc R5 driver requires reserved memory carveouts and
mailbox configuration to instantiate the cores successfully.
Since this is a board level dependency, keep the R5 subsytem
disabled at SoC dtsi, otherwise it results in probe errors like
below during AM62P SK boot:
r5fss@79000000: reserved memory init failed, ret = -22
r5fss@79000000: k3_r5_cluster_rproc_init failed, ret = -22
r5fss@78000000: reserved memory init failed, ret = -22
r5fss@78000000: k3_r5_cluster_rproc_init failed, ret = -22
Fixes: b5080c7c1f ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240121134017.374992-1-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
If PERF_EVENT program has __arg_ctx argument with matching
architecture-specific pt_regs/user_pt_regs/user_regs_struct pointer
type, libbpf should still perform type rewrite for old kernels, but not
emit the warning. Fix copy/paste from kernel code where 0 is meant to
signify "no error" condition. For libbpf we need to return "true" to
proceed with type rewrite (which for PERF_EVENT program will be
a canonical `struct bpf_perf_event_data *` type).
Fixes: 9eea8fafe3 ("libbpf: fix __arg_ctx type enforcement for perf_event programs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206002243.1439450-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Magnus Karlsson says:
====================
xsk: support redirect to any socket bound to the same umem
This patch set adds support for directing a packet to any socket bound
to the same umem. This makes it possible to use the XDP program to
select what socket the packet should be received on. The user can
populate the XSKMAP with various sockets and as long as they share the
same umem, the XDP program can pick any one of them.
The implementation is straight-forward. Instead of testing that the
incoming packet is targeting the same device and queue id as the
socket is bound to, just check that the umem the packet was received
on is the same as the socket we want it to be received on. This
guarantees that the redirect is legal as it is already in the correct
umem.
Patch #1 implements the feature and patch #2 adds documentation.
Thanks: Magnus
====================
Link: https://lore.kernel.org/r/20240205123553.22180-1-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for directing a packet to any socket bound to the same
umem. This makes it possible to use the XDP program to select what
socket the packet should be received on. The user can populate the
XSKMAP with various sockets and as long as they share the same umem,
the XDP program can pick any one of them.
Suggested-by: Yuval El-Hanany <yuvale@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240205123553.22180-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi says:
====================
Transfer RCU lock state across subprog calls
David suggested during the discussion in [0] that we should handle RCU
locks in a similar fashion to spin locks where the verifier understands
when a lock held in a caller is released in callee, or lock taken in
callee is released in a caller, or the callee is called within a lock
critical section. This set extends the same semantics to RCU read locks
and adds a few selftests to verify correct behavior. This issue has also
come up for sched-ext programs.
This would now allow static subprog calls to be made without errors
within RCU read sections, for subprogs to release RCU locks of callers
and return to them, or for subprogs to take RCU lock which is later
released in the caller.
[0]: https://lore.kernel.org/bpf/20240204120206.796412-1-memxor@gmail.com
Changelog:
----------
v1 -> v2:
v1: https://lore.kernel.org/bpf/20240204230231.1013964-1-memxor@gmail.com
* Add tests for global subprog behaviour (Yafang)
* Add Acks, Tested-by (Yonghong, Yafang)
====================
Link: https://lore.kernel.org/r/20240205055646.1112186-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests covering the following cases:
- A static or global subprog called from within a RCU read section works
- A static subprog taking an RCU read lock which is released in caller works
- A static subprog releasing the caller's RCU read lock works
Global subprogs that leave the lock in an imbalanced state will not
work, as they are verified separately, so ensure those cases fail as
well.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240205055646.1112186-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow transferring an imbalanced RCU lock state between subprog calls
during verification. This allows patterns where a subprog call returns
with an RCU lock held, or a subprog call releases an RCU lock held by
the caller. Currently, the verifier would end up complaining if the RCU
lock is not released when processing an exit from a subprog, which is
non-ideal if its execution is supposed to be enclosed in an RCU read
section of the caller.
Instead, simply only check whether we are processing exit for frame#0
and do not complain on an active RCU lock otherwise. We only need to
update the check when processing BPF_EXIT insn, as copy_verifier_state
is already set up to do the right thing.
Suggested-by: David Vernet <void@manifault.com>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240205055646.1112186-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
VP2 and VP3 are unused video ports and VP3 share the same parent
clock as VP1 causing issue with pixel clock setting for HDMI (VP1).
The current DM firmware does not support changing parent clock if it
is shared by another component. It returns 0 for the determine_rate
query before causing set_rate to set the clock at default maximum of
1.8GHz which is a lot more than the maximum frequency videoports can
support (600MHz) causing SYNC LOST issues.
So remove the parent clocks for unused VPs to avoid conflict.
Fixes: 6f8605fd7d ("arm64: dts: ti: k3-am69-sk: Add DP and HDMI support")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Enric Balletbo i Serra <eballetbo@redhat.com>
Link: https://lore.kernel.org/r/20240201142308.4954-1-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Kumar Kartikeya Dwivedi says:
====================
Enable static subprog calls in spin lock critical sections
This set allows a BPF program to make a call to a static subprog within
a bpf_spin_lock critical section. This problem has been hit in sched-ext
and ghOSt [0] as well, and is mostly an annoyance which is worked around
by inling the static subprog into the critical section.
In case of sched-ext, there are a lot of other helper/kfunc calls that
need to be allow listed for the support to be complete, but a separate
follow up will deal with that.
Unlike static subprogs, global subprogs cannot be allowed yet as the
verifier will not explore their body when encountering a call
instruction for them. Therefore, we would need an alternative approach
(some sort of function summarization to ensure a lock is never taken
from a global subprog and all its callees).
[0]: https://lore.kernel.org/bpf/bd173bf2-dea6-3e0e-4176-4a9256a9a056@google.com
Changelog:
----------
v1 -> v2
v1: https://lore.kernel.org/bpf/20240204120206.796412-1-memxor@gmail.com
* Indicate global function call in verifier error string (Yonghong, David)
* Add Acks from Yonghong, David
====================
Link: https://lore.kernel.org/r/20240204222349.938118-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for static subprog calls within bpf_spin_lock critical
section, and ensure we still reject global subprog calls. Also test the
case where a subprog call will unlock the caller's held lock, or the
caller will unlock a lock taken by a subprog call, ensuring correct
transfer of lock state across frames on exit.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240204222349.938118-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, calling any helpers, kfuncs, or subprogs except the graph
data structure (lists, rbtrees) API kfuncs while holding a bpf_spin_lock
is not allowed. One of the original motivations of this decision was to
force the BPF programmer's hand into keeping the bpf_spin_lock critical
section small, and to ensure the execution time of the program does not
increase due to lock waiting times. In addition to this, some of the
helpers and kfuncs may be unsafe to call while holding a bpf_spin_lock.
However, when it comes to subprog calls, atleast for static subprogs,
the verifier is able to explore their instructions during verification.
Therefore, it is similar in effect to having the same code inlined into
the critical section. Hence, not allowing static subprog calls in the
bpf_spin_lock critical section is mostly an annoyance that needs to be
worked around, without providing any tangible benefit.
Unlike static subprog calls, global subprog calls are not safe to permit
within the critical section, as the verifier does not explore them
during verification, therefore whether the same lock will be taken
again, or unlocked, cannot be ascertained.
Therefore, allow calling static subprogs within a bpf_spin_lock critical
section, and only reject it in case the subprog linkage is global.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240204222349.938118-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that the driver core can properly handle constant struct bus_type,
move the coreboot_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-firmware-v1-1-d1bff946606d@marliere.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
During recovery, if FAULT_BLOCK is on, it is possible that
f2fs_reserve_new_block() will return -ENOSPC during recovery,
then it may trigger panic.
Also, if fault injection rate is 1 and only FAULT_BLOCK fault
type is on, it may encounter deadloop in loop of block reservation.
Let's change as below to fix these issues:
- remove bug_on() to avoid panic.
- limit the loop count of block reservation to avoid potential
deadloop.
Fixes: 956fa1ddc1 ("f2fs: fix to check return value of f2fs_reserve_new_block()")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now IS_DNODE is used in f2fs_flush_inline_data and it has some problems:
1. Just only inodes may include inline data,not all direct nodes
2. When system IO is busy, it is inefficient to lock a direct node page
but not an inode page. Besides, if this direct node page is being
locked by others for IO, f2fs_flush_inline_data will be blocked here,
which will affects the checkpoint process, this is unreasonable.
So IS_INODE should be used in f2fs_flush_inline_data.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just remove some redundant codes, no logic change.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_err_ratelimited() to instead f2fs_err() in
f2fs_record_stop_reason() and f2fs_record_errors() to
avoid redundant logs.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports using printk_ratelimited() in f2fs_printk(), and
wrap ratelimited f2fs_printk() into f2fs_{err,warn,info}_ratelimited(),
then, use these new helps to clean up codes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
BUG: kernel NULL pointer dereference, address: 0000000000000014
RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? __die+0x29/0x70
? page_fault_oops+0x154/0x4a0
? prb_read_valid+0x20/0x30
? __irq_work_queue_local+0x39/0xd0
? irq_work_queue+0x36/0x70
? do_user_addr_fault+0x314/0x6c0
? exc_page_fault+0x7d/0x190
? asm_exc_page_fault+0x2b/0x30
? f2fs_submit_page_write+0x6cf/0x780 [f2fs]
? f2fs_submit_page_write+0x736/0x780 [f2fs]
do_write_page+0x50/0x170 [f2fs]
f2fs_outplace_write_data+0x61/0xb0 [f2fs]
f2fs_do_write_data_page+0x3f8/0x660 [f2fs]
f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs]
f2fs_write_cache_pages+0x3da/0xbe0 [f2fs]
...
It is possible that other threads have added this fio to io->bio
and submitted the io->bio before entering f2fs_submit_page_write().
At this point io->bio = NULL.
If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true,
then an NULL pointer dereference error occurs at bio_get(io->bio).
The original code for determining zone end was after "out:",
which would have missed some fio who is zone end. I've moved
this code before "skip:" to make sure it's done for each fio.
Fixes: e067dc3c6b ("f2fs: maintain six open zones for zoned devices")
Signed-off-by: Wenjie Qi <qwjhust@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to check last zone_pending_bio and wait IO completion before
traverse next fio in io->io_list, otherwise, bio in next zone may be
submitted before all IO completion in current zone.
Fixes: e067dc3c6b ("f2fs: maintain six open zones for zoned devices")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
