If all the other SoCs are disabled, the driver fails to build:
drivers/soc/tegra/fuse/fuse-tegra30.c:684:17: error: 'tegra30_fuse_read' undeclared here (not in a function); did you mean 'tegra_fuse_readl'?
684 | .read = tegra30_fuse_read,
| ^~~~~~~~~~~~~~~~~
| tegra_fuse_readl
drivers/soc/tegra/fuse/fuse-tegra30.c:694:17: error: 'tegra30_fuse_init' undeclared here (not in a function); did you mean 'tegra_fuse_info'?
694 | .init = tegra30_fuse_init,
| ^~~~~~~~~~~~~~~~~
Fix the list of SoCs using this function to include the newly added one.
Fixes: dee509eb9cd5 ("soc/tegra: fuse: Add support for Tegra241")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra241 SoC data uses tegra194_soc_attr_group, which is only defined
if config CONFIG_ARCH_TEGRA_194_SOC or CONFIG_ARCH_TEGRA_234_SOC or
both are enabled. This causes a build failure if both of these configs
are disabled and CONFIG_ARCH_TEGRA_241_SOC is enabled.
Define tegra194_soc_attr_group if CONFIG_ARCH_TEGRA_241_SOC is enabled.
Signed-off-by: Kartik <kkartik@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add ACPI support for Tegra194 & Tegra243 SoC's. This requires
following modifications to the probe when ACPI boot is used:
- Initialize soc data.
- Add nvmem lookups.
- Register soc device.
- use devm_clk_get_optional() instead of devm_clk_get() to get
fuse->clk, as fuse clocks are not required when using ACPI boot.
Also, drop '__init' keyword for tegra_soc_device_register() as this is also
used by tegra_fuse_probe() and use dev_err_probe() wherever applicable.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add helper function tegra_fuse_print_sku_info() to print Tegra SKU
information. So, it can be shared between tegra_fuse_init() and
ACPI probe which is to be introduced later.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add helper function tegra_fuse_add_lookups() to register Tegra fuse
nvmem lookups. So, this can be shared between tegra_fuse_init() and
ACPI probe, which is to be introduced later.
Use kmemdup_array to duplicate fuse->soc->lookups.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In preparation to ACPI support in Tegra fuse driver add function
tegra_acpi_init_apbmisc() to initialize tegra-apbmisc driver.
Also, document the reason of calling tegra_init_apbmisc() at early init.
Note that function tegra_acpi_init_apbmisc() is not placed in the __init
section, because it will be called during probe.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
To prepare for adding ACPI support to the tegra-apbmisc driver,
relocate the code responsible for mapping memory resources from
the function ‘tegra_init_apbmisc’ to the function
‘tegra_init_apbmisc_resources.’ This adjustment will allow the
code to be shared between ‘tegra_init_apbmisc’ and the upcoming
‘tegra_acpi_init_apbmisc’ function.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently, in tegra_fuse_probe() if clock/reset get fails, then the
driver prints an error if the error is not caused by -EPROBE_DEFER.
This can be improved by using dev_err_probe() instead.
So, return dev_err_probe() if clock/reset get fails.
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Introduce kmemdup_array() API to duplicate `n` number of elements
from a given array. This internally uses kmemdup to allocate and duplicate
the `src` array.
Signed-off-by: Kartik <kkartik@nvidia.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
These TEGRA_IO_RAIL_... functions and constants have been deprecated in
commit 21b4991051 ("soc/tegra: pmc: Add I/O pad voltage support") in
2016-11.
There seems to be no users since kernel 4.16.
Remove them now.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Jiri Pirko says:
====================
dpll: expose lock status error value to user
From: Jiri Pirko <jiri@nvidia.com>
Allow to expose lock status errort value over new DPLL generic netlink
attribute. Extend the lock_status_get() op by new argument to get the
value from the driver. Implement this new argument fill-up
in mlx5 driver.
====================
Link: https://lore.kernel.org/r/20240130120831.261085-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fill-up the lock status error value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pass additional argunent status_error over lock_status_get()
so drivers can fill it up. In case they do, expose the value over
previously introduced attribute to user. Do it only in case the
current lock_status is either "unlocked" or "holdover".
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the dpll devices goes to state "unlocked" or "holdover", it may be
caused by an error. In that case, allow user to see what the error was.
Introduce a new attribute and values it can carry.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For devices with multiple clock sources connected to a selector, we need
to check what a clock selector control request has returned. This is
needed to ensure that a requested clock source is indeed selected and for
autoclock feature to work.
For devices with single clock source connected, if we get an error there
is nothing else we can do about it. We can't skip clock selector setup as
it is required by some devices. So lets just ignore error in this case.
This should fix various buggy Mackie devices:
[ 649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
There is also interesting info from the Windows documentation [1] (this
is probably why manufacturers dont't even test this feature):
"The USB Audio 2.0 driver doesn't support clock selection. The driver
uses the Clock Source Entity, which is selected by default and never
issues a Clock Selector Control SET CUR request."
Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240201115308.17838-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
XDP queues are created/destroyed when a XDP program
is attached/detached. In current driver xdp_queues are not
getting destroyed on program exit due to incorrect xdp_queue
and tot_tx_queue count values.
This patch fixes the issue by setting tot_tx_queue and xdp_queue
count to correct values. It also fixes xdp.data_hard_start address.
Fixes: 06059a1a9a ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use existing inline function for IP version check.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
Cc: stable@vger.kernel.org
Fixes: 7ba89d2af1 ("io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Following change in the I3C bindings, the "master" suffix in I3C
controller node name is discouraged (it is "controller" now) and not
accurate (if device supports also target mode).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Let the file system know how much dirty data exists at the passed
in offset. This allows file systems to allocate the right amount
of space that actually is written back if they can't eagerly
convert (e.g. because they don't support unwritten extents).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-15-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The ->map_blocks interface returns a valid range for writeback, but we
still call back into it for every block, which is a bit inefficient.
Change iomap_writepage_map to use the valid range in the map until the
end of the folio or the dirty range inside the folio instead of calling
back into every block.
Note that the range is not used over folio boundaries as we need to be
able to check the mapping sequence count under the folio lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-14-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently the writeback code delays submitting fill ioends until we
reach the end of the folio. The reason for that is that otherwise
the end I/O handler could clear the writeback bit before we've even
finished submitting all I/O for the folio.
Add a bias to ifs->write_bytes_pending while we are submitting I/O
for a folio so that it never reaches zero until all I/O is completed
to prevent the early writeback bit clearing, and remove the now
superfluous submit_list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-13-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Split the loop body that calls into the file system to map a block and
add it to the ioend into a separate helper to prefer for refactoring of
the surrounding code.
Note that this was the only place in iomap_writepage_map that could
return an error, so include the call to ->discard_folio into the new
helper as that will help to avoid code duplication in the future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-12-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Instead of clling mapping_set_error once per folio, only do that once
per bio, and consolidate all the writeback error handling code in
iomap_finish_ioend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-11-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Back in the days when a single bio could only be filled to the hardware
limits, and we scheduled a work item for each bio completion, chaining
multiple bios for a single ioend made a lot of sense to reduce the number
of completions. But these days bios can be filled until we reach the
number of vectors or total size limit, which means we can always fit at
least 1 megabyte worth of data in the worst case, but usually a lot more
due to large folios. The only thing bio chaining is buying us now is
to reduce the size of the allocation from an ioend with an embedded bio
into a plain bio, which is a 52 bytes differences on 64-bit systems.
This is not worth the added complexity, so remove the bio chaining and
only use the bio embedded into the ioend. This will help to simplify
further changes to the iomap writeback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-10-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The calculation in iomap_sector is pretty trivial and most of the time
iomap_add_to_ioend only callers either iomap_can_add_to_ioend or
iomap_alloc_ioend from a single invocation.
Calculate the sector in the two lower level functions and stop passing it
from iomap_add_to_ioend and update the iomap_alloc_ioend argument passing
order to match that of iomap_add_to_ioend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-9-hch@lst.de
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Switch to the same argument order as iomap_writepage_map and remove the
ifs argument that can be trivially recalculated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-8-hch@lst.de
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the tracepoint and the iomap check from iomap_do_writepage into
iomap_writepage_map. This keeps all logic in one places, and leaves
iomap_do_writepage just as the wrapper for the callback conventions of
write_cache_pages, which will go away when that is converted to an
iterator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-7-hch@lst.de
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Most of iomap_do_writepage is dedidcated to handling a folio crossing or
beyond i_size. Split this is into a separate helper and update the
commens to deal with folios instead of pages and make them more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-6-hch@lst.de
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The iomap writepage implementation has been removed in commit
478af190cb ("iomap: remove iomap_writepage") and this code is now only
called through ->writepages which never happens from memory reclaim.
Nove the check from iomap_do_writepage to iomap_writepages so that is
only called once per ->writepage invocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-5-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The io_folios member in struct iomap_ioend counts the number of folios
added to an ioend. It is only used at submission time and can thus be
moved to iomap_writepage_ctx instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-4-hch@lst.de
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap_writepage_map aready warns about inline data, but then just ignores
it. Treat it as an error and return -EIO.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-3-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
write_cache_pages always clear the page dirty bit before calling into the
file systems, and leaves folios with a writeback failure without the
dirty bit after return. We also clear the per-block writeback bits for
writeback failures unless no I/O has submitted, which will leave the
folio in an inconsistent state where it doesn't have the folio dirty,
but one or more per-block dirty bits. This seems to be due the place
where the iomap_clear_range_dirty call was inserted into the existing
not very clearly structured code when adding per-block dirty bit support
and not actually intentional. Switch to always clearing the dirty on
writeback failure.
Fixes: 4ce02c6797 ("iomap: Add per-block dirty state tracking to improve performance")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231207072710.176093-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Vaio VJFE-ADL is equipped with ALC269VC, and it needs
ALC298_FIXUP_SPK_VOLUME quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240201122114.30080-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove an unused stub function that calls a non-existant function.
This function was accidentally added as part of commit
2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test"). It was
a relic of an earlier version of the test that should have been
removed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://msgid.link/r/20240129162737.497-19-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check whether the firmware is already patched. If so, include the
firmware version in the firmware file name.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if either:
- FIRMWARE_MISSING == 0, or
- it is a secured CS35L56 (which implies that is was already patched),
cs35l56_hw_init() will set preloaded_fw_ver to the (non-zero)
firmware version if either of these conditions is true.
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Backport note:
This won't apply to kernel versions older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-18-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the filename field layout to:
cs35l56-rev[-s]-dsp1-misc[-sub].[wmfw|bin]
This is to keep the same firmware file naming scheme as the
CS35L56 ASoC driver.
This is not a compatibility break because no firmware files have
been published.
The original field layout matched the ASoC driver, but the way the
ASoC driver used the wm_adsp driver config to form this filename
was bugged. Fixing the ASoC driver to use the correct wm_adsp config
strings means that the 's' flag (to indicate a secured part) has to
move to somewhere after the first '-'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-17-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-16-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original 50ms timeout for firmware boot is not long enough for
worst-case time to reboot after a firmware download. Increase the
timeout to 250ms.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-15-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1a1c3d794e ("ASoC: cs35l56: Use PCI SSID as the firmware UID")
Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Preloaded firmware:
cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the silicon revision and secured flag in the wm_adsp fwf_name
string instead of including them in the part string.
This changes the format of the firmware name string from
cs35l56[s]-rev-misc[-system_name]
to
cs35l56-rev[-s]-misc[-system_name]
No firmware files have been published, so this doesn't cause a
compatibility break.
Silicon revision and secured flag are included in the firmware
filename to pick a firmware compatible with the part. These strings
were being added to the part string, but that is a misuse of the
string. The correct place for these is the fwf_name string, which
is specifically intended to select between multiple firmware files
for the same part.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 608f1b0dbd ("ASoC: cs35l56: Move DSP part string generation so that it is done only once")
Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Defer initializing the state of the ASP1 mixer registers until
the firmware has been downloaded and rebooted.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However, if it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link. Even if the ASP is used
as a firmware-firmware interconnect it is useful to have
ALSA controls for the ASP mixer. They are at least useful for
debugging.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP mixer registers. This means that we can't assume the default
state of these registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
DAPM normally reads the initial state of mux registers during
probe() but this would mean blocking probe() for several seconds
until the firmware has initialized them. To avoid this, the
mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read
the register state. Custom get/set callbacks are implemented for
ALSA control access, and these can safely block waiting for the
firmware download.
After the firmware download has completed, the state of the
mux registers is known so a work job is queued to call
snd_soc_dapm_mux_update_power() on each of the mux widgets.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add ASP1_FRAME_CONTROL1, ASP1_FRAME_CONTROL5 and the ASP1_TX?_INPUT
registers to the sequence used to initialize the ASP configuration.
Write this sequence to the cache and directly to the registers to
ensure that they match.
A system-specific firmware can patch these registers to values that are
not the silicon default, so that the CS35L56 boots already in the
configuration used by Windows or by "driverless" Windows setups such
as factory tuning.
These may not match how Linux is configuring the HDA codec. And anyway
on Linux the ALSA controls are used to configure routing options.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://msgid.link/r/20240129162737.497-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Patch the SDW TX mixer registers to silicon defaults.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So the
firmware sets up the SDW TX mixer registers to whatever audio
is relevant on a specific system.
This means that the driver cannot assume the initial values
of these registers. But Linux has ALSA controls to configure
routing, so the registers can be patched to silicon default and
the ALSA controls used to select what audio to feed back to the
host capture path.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the check of fw_patched from cs35l56_is_fw_reload_needed().
Also remove the redundant check for control of the reset GPIO.
The fw_patched flag is set when cs35l56_dsp_work() has completed its
steps to download firmware and power-up wm_adsp. There was a check in
cs35l56_is_fw_reload_needed() to make a quick exit of 'false' if
!fw_patched. The original idea was that the system might be suspended
before the driver has ever made any attempt to download firmware, and
in that case the driver doesn't need to return to a patched state
because it was never in a patched state.
This check of fw_patched is buggy because it prevented ever recovering
from a failed patch. If a previous attempt to patch and reboot the
silicon had failed it would leave fw_patched==false. This would mean
the driver never attempted another download even though the fault may
have been cleared (by a hard reset, for example).
It is also a redundant check because the calling code already makes
a quick exit if cs35l56_component_probe() has not been called, which
deals with the original intent of this check but in a safer way.
The check for reset GPIO is redundant: if the silicon was hard-reset
the FIRMWARE_MISSING flag will be 1. But this check created an
expectation that the suspend/resume code toggles reset. This can't
easily be protected against accidental code breakage. The only reason
for the check was to skip runtime-resuming the driver to read the
PROTECTION_STATUS register when it already knows it reset the silicon.
But in that case the driver will have to be runtime-resumed to do
the firmware download. So it created an assumption for no benefit.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240129162737.497-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.
The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 898673b905 ("ASoC: cs35l56: Move shared data into a common data structure")
Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
