Commit graph

1,267,977 commits

Author SHA1 Message Date
Andrew Davis
67d85ee4bc power: supply: bq27xxx: Switch to a simpler IDA interface
We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240123150914.308510-1-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-01-27 00:49:17 +01:00
Linus Torvalds
3a5879d495 ata changes for 6.8-rc2
- Fix an incorrect link_power_management_policy sysfs attribute
    value. We were previously using the same attribute value for
    two different LPM policies (me).
 
  - Add a ASMedia ASM1166 quirk. The SATA host controller always
    reports that it has 32 ports, even though it only has six ports.
    Add a quirk that overrides the value reported by the controller
    (Conrad).
 
  - Add a ASMedia ASM1061 quirk. The SATA host controller completely
    ignores the upper 21 bits of the DMA address. This causes IOMMU
    error events when a (valid) DMA address actually has any of the
    upper 21 bits set. Add a quirk that limits the dma_mask to
    43-bits (Lennert).
 -----BEGIN PGP SIGNATURE-----
 
 iIgEABYKADAWIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZbQUsBIcY2Fzc2VsQGtl
 cm5lbC5vcmcACgkQyWQxo5nGTXJ3aQEA5Ukt5V9SyNShAYTbwSKNkA1A27PUIr5M
 bWCpElxDXHoBAM5+9blazLd/hSJJFUfd+wpvsSCVKcacSTbJSFCpt+8I
 =rV0A
 -----END PGP SIGNATURE-----

Merge tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata updates from Niklas Cassel:

 - Fix an incorrect link_power_management_policy sysfs attribute value.

   We were previously using the same attribute value for two different
   LPM policies (me)

 - Add a ASMedia ASM1166 quirk.

   The SATA host controller always reports that it has 32 ports, even
   though it only has six ports. Add a quirk that overrides the value
   reported by the controller (Conrad)

 - Add a ASMedia ASM1061 quirk.

   The SATA host controller completely ignores the upper 21 bits of the
   DMA address. This causes IOMMU error events when a (valid) DMA
   address actually has any of the upper 21 bits set. Add a quirk that
   limits the dma_mask to 43-bits (Lennert)

* tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
  ahci: asm1166: correct count of reported ports
  ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWN
2024-01-26 15:24:00 -08:00
Linus Torvalds
914e17088e block-6.8-2024-01-26
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmWz+D8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjprEACQAJWX6h+bSmbxst3AkXZoNLCPq7EsripI
 igbUcdrkKmnUL+4/r1qM6sE7I7nIILBWzSsFgawC91tq2/9KWq7P7FeuEHdiRmsS
 RwXuTdJiQBvrDy2k59I0vtiE+zrbrhmLGcdIg4xbKl8bg17nA6KaICf4oxCqkPZp
 R+WvcZJvfKpN8bnd3bjJOK2vwYL26HIPhUU0KyWPAc4Nx7K5pe9RT+4kWY4vmklY
 XqOxfnoPiKBKlXApaSDRTFITPhg/usq6vfPgtADvdGt7ieMbN1YplLNO82kHjUA9
 sp/biSBtOT12JiH+biRFcSjNPyBOzu13Opshi0Ou4uNTtyH8FXqXMVLGfl/uDRgW
 khkcY8rfRXWpbPrMmqlNExeZ47ZztSNKoqVXCV1yNUOTlGQvFbhiRDOUtG3O+wPD
 df8MrPc5P5jVVUGhDSTHZtXlYbkjsmodIVSsI/YFwZ3XB0tz9NqTZtO7INa0BZku
 llIgDzBhk1NPqlZCpaLNvEFUWmjoHqktwyDqe3BuWpwjUOZnLvVKic2RkK7Y8ufF
 MG6qn9VZ4qrb2rxmsM4yd7V3nNRpnmVWlN6feIP3Rlb+M2+nGAyAw+pZxJ6iF+Hi
 bdvbP6UnaA5iZqSASifjDl8WCSllymPDwMPZGDsaEi/5CW8JMpdYwlCrBrY19hlm
 8Wq6YGCFXQ==
 =A7z9
 -----END PGP SIGNATURE-----

Merge tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

 - RCU warning fix for md (Mikulas)

 - Fix for an aoe issue that lockdep rightfully complained about
   (Maksim)

 - Fix for an error code change in partitioning that caused a regression
   with some tools (Li)

 - Fix for a data direction warning with bi-direction commands
   (Christian)

* tag 'block-6.8-2024-01-26' of git://git.kernel.dk/linux:
  md: fix a suspicious RCU usage warning
  aoe: avoid potential deadlock at set_capacity
  block: Fix WARNING in _copy_from_iter
  block: Move checking GENHD_FL_NO_PART to bdev_add_partition()
2024-01-26 15:19:43 -08:00
Linus Torvalds
cced1c5e72 io_uring-6.8-2024-01-26
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmWz+DIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpqDyD/0TEDXGFeSLs67a+4ytCy2ZDPpEmMLkLue0
 MGutB5hWGWa/1Ll6Icjo2UImkj89kTGLdtPGYTXHQGuTaj2TvOryCm0FhCSJMPOA
 Ak+uIQ9b+5UEULUC0O/L+Fpju8OizV4rrwmSnIXlZQmI0xNCgKK42mUSVen/Vnnw
 7408F90xm9MHXsK/HKEmHIFgwC+KDY3C3PcpeZNpzNe0UcQkcR8hvwsD0EzxBeeL
 K9huD95UuCAI6G6ohRVGUWXCxZ3w340T0z3lAKVKg34CfZ1Qup2MjPQ0BK63Gbfi
 k/CSqAhY5GbxhtgssSslqr2TUBLQDK2SqKlzYQG2r0u/aYnQXQYs81mgbXBlxCQu
 d2c2pIyyXYq8TNtd11R+ig83hplLCc2KhJhVt+t7ZF91ACq/pweA/xNfBiR7FhFV
 FHbTpopa5oEJUtrDA+ebnyX8sUKInls3eJCe6JRP/h1NoOcVElwMKlxLYGT5IoFd
 ABVMCY0lqT760aEHeAlLIR6/RcK07Q2QIBlzAPQyife89ZbwZlaB4E1mUfFcnxmH
 jNJRa3QBR+9gv5VE5JUYnzuUxgGrThRC5Z8OWZ/NdPjeF2NjBy7PESGf1tECE+Yb
 JMaPTiliC7i28sZhEbXpEEF4jko90kt5IGnkOH4tvMa7VAtsudguoHl1WbvbDl19
 Cv+YAtTZhg==
 =xTSJ
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linux

Pull io_uring fix from Jens Axboe:
 "Just a single tweak to the newly added IORING_OP_FIXED_FD_INSTALL from
  Paul, ensuring it goes via the audit path and playing it safe by
  excluding it from using registered creds"

* tag 'io_uring-6.8-2024-01-26' of git://git.kernel.dk/linux:
  io_uring: enable audit and restrict cred override for IORING_OP_FIXED_FD_INSTALL
2024-01-26 15:17:42 -08:00
Linus Torvalds
667c889308 Thermal control update for 6.8-rc2
Remove some dead code from the Intel powerclamp thermal control
 driver (Srinivas Pandruvada).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmWz97wSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxGUgP/RYSYL500p1tIJy58mcX9VyDHQzSyRzD
 jabRiolMCix5Kpqgtu8PH4BIrkkPsWep8/eGtm+5E+bBpmyEiFoVZg5pn2f8ao6f
 e5iMlCy51QDiibrTKUOYxQllzNLcVC9+rCsesbzjfwSzVXdIXFWn9r6RySPG6+Lg
 C0csLrorwYU6r5Wif6kNzsOE75ZqfiLisyglynVyq+n8ry3eCFiqDZ3Hrdv6DjJx
 BWeB1fFp8srk30lnNTKSx/trDpBujDCJfY4xv2XoOj1HYZGwyQ/cp1QRPo3jWJx7
 +H/VF0GGqEEju//mF8MxsRcFHBGr+NiSVzgOtjbRs9kwIHhyuxuWU7DqIBaDZafw
 AkAQyyX0vgOjMyDZEHoyellxkQ+MPjPYnvktqLQcnNjFgFirbiAwwBOsfs7ERJek
 AEYReII5lAJl8Jl3odPWi6Gwfc12+E3xsmLnbACYQBYiquzm+MRNDAa0/sb/XwLJ
 fguHUdiXaKp2HtOUCdL/8wRgO/NKL4y3TeQ2e/JQDNaoHdWXtB/t4tti0cqVjABq
 rkrMq4W30il/KMMIz4z6oXetLZpOcBgvx7YDFUzyCfygq7D5Om0zT9veYPIHjmdD
 nxT+d6+HeLUSBcJ4aT3fxBvgLcAyl4GrwwifaJb0wPqeU9/XSl5G6S7VIzSFQWXI
 GEe09YQjn7m/
 =nPxY
 -----END PGP SIGNATURE-----

Merge tag 'thermal-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control update from Rafael Wysocki:
 "Remove some dead code from the Intel powerclamp thermal control driver
  (Srinivas Pandruvada)"

* tag 'thermal-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: powerclamp: Remove dead code for target mwait value
2024-01-26 15:06:23 -08:00
Linus Torvalds
0c879d8813 Power management fixes for 6.8-rc2
- Fix the handling of scaling_max/min_freq sysfs attributes in the AMD
    P-state cpufreq driver (Mario Limonciello).
 
  - Make the intel_pstate cpufreq driver avoid unnecessary computation of
    the HWP performance level corresponding to a given frequency in the
    cases when it is known already, which also helps to avoid reducing
    the maximum CPU capacity artificially on some systems (Rafael J.
    Wysocki).
 
  - Fix compilation of the cpupower utility when CFLAGS is passed as a
    make argument for cpupower, but it does not take effect as expected
    due to mishandling (Stanley Chan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmWz91ISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxU6UQAJBGX1YtEYBqcTZdzY3v06m0CXsvptwK
 k6DiViX1tWuL1G0/lavVKgvSOpCMVSnW3rfm5/8Nx+bOHU3eopTCYCfUslP+del6
 U5PW/0Qt7YYvb05SQobJq2XvcGEyrA4/b8JQ6K0OVAvN5DyQdAP3fcDoyz1WPVZN
 E9dnh4ZnzNTQYVz6lvqecBV8sOV49TZ0NtrbnToT/nbKWVV35a0SkFQi97VhfIGF
 TdPDBkfd8/gGdp6ldixGMKMqy91G5xB+jzFFb9FBFOkzIOQuxT+9a6s2XHcSVz9r
 fE3gUB76M2I3GpYcffbRbAEpwkLrIhWzY3g+WcC8uNx+yRkVHKaE5m4PpGJjFRYG
 KrBxSu2Itts4Q4fQFQlskgRVVsVN2edhUPlVSxcZSs/RRoX/XJosCWQ0+W4OA5K4
 mxRAPm98aORqqLHM2iGusI8uq+4rF6971Wua6o5A5e0ejm1E9qF0fVMwEnbJnAk1
 UGe6mQ+YrSz/Cgt5g83YAjLRzVC0er4/GT5HkWwm/vtjGTdNdhhkH5gD7gG2n5Eh
 AfHZB3HMoU8h017QjChyxKvuZoqPQj7uChVq0/Lzq/otZcXCGqef+ca/WkPepfo7
 2Y7MKh5bulN+eIvdNY1GZ+j10wh8R/PgZ+W7+rcYJ/J2rofVT8TOMz5Qhi9Z6IG8
 9UGcvO+ED7Rz
 =4dQr
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix two cpufreq drivers and the cpupower utility.

  Specifics:

   - Fix the handling of scaling_max/min_freq sysfs attributes in the
     AMD P-state cpufreq driver (Mario Limonciello)

   - Make the intel_pstate cpufreq driver avoid unnecessary computation
     of the HWP performance level corresponding to a given frequency in
     the cases when it is known already, which also helps to avoid
     reducing the maximum CPU capacity artificially on some systems
     (Rafael J. Wysocki)

   - Fix compilation of the cpupower utility when CFLAGS is passed as a
     make argument for cpupower, but it does not take effect as expected
     due to mishandling (Stanley Chan)"

* tag 'pm-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/amd-pstate: Fix setting scaling max/min freq values
  cpufreq: intel_pstate: Refine computation of P-state for given frequency
  tools cpupower bench: Override CFLAGS assignments
2024-01-26 14:53:28 -08:00
Linus Torvalds
70da22eb63 A handful of relatively boring documentation fixes.
-----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmWwOa4PHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Y/rMH/RqcFr8jh+OseivZJhJGSmZiE6EKbF4HUP/P
 //yhbmlnj3kRgnTeqgMFQY/08ZGkWG6TeCTU6rQ1kmUNFYF0M8caKg6aNDa69o42
 pf1C1MYnQdjY9eGAis23/I8IJD+6lOGHDiSiJrlndjMxwd0D1jJtG9m03r8Gz3Nv
 2mnl8Bo33JSCygcsPyy+8+Z35EgHOBEYkV8ANAJOgZsV34MxeAs0pLdCCKTlT8H2
 AzAOGGv/iK2ZpheE7uEn++7BTOqidpshQ2oqyiaHNKrot1pDq+kRA7tkDlK5k1Ib
 jfcy60BxNcQ2Vxcr4a78rldaiGWHh5IkNGXx8XjQowiEfQs93KU=
 =2AIX
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.8-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "A handful of relatively boring documentation fixes"

* tag 'docs-6.8-fixes' of git://git.lwn.net/linux:
  docs: admin-guide: remove obsolete advice related to SLAB allocator
  doc: admin-guide/kernel-parameters: remove useless comment
  docs/accel: correct links to mailing list archives
  docs/sphinx: Fix TOC scroll hack for the home page
2024-01-26 14:51:41 -08:00
Ondrej Mosnacek
99b817c173 lsm: fix the logic in security_inode_getsecctx()
The inode_getsecctx LSM hook has previously been corrected to have
-EOPNOTSUPP instead of 0 as the default return value to fix BPF LSM
behavior. However, the call_int_hook()-generated loop in
security_inode_getsecctx() was left treating 0 as the neutral value, so
after an LSM returns 0, the loop continues to try other LSMs, and if one
of them returns a non-zero value, the function immediately returns with
said value. So in a situation where SELinux and the BPF LSMs registered
this hook, -EOPNOTSUPP would be incorrectly returned whenever SELinux
returned 0.

Fix this by open-coding the call_int_hook() loop and making it use the
correct LSM_RET_DEFAULT() value as the neutral one, similar to what
other hooks do.

Cc: stable@vger.kernel.org
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Link: https://lore.kernel.org/selinux/CAEjxPJ4ev-pasUwGx48fDhnmjBnq_Wh90jYPwRQRAqXxmOKD4Q@mail.gmail.com/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2257983
Fixes: b36995b860 ("lsm: fix default return value for inode_getsecctx")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-01-26 17:19:00 -05:00
Daniel Golle
dfa988b4c7 net: dsa: mt7530: fix 10M/100M speed on MT7988 switch
Setup PMCR port register for actual speed and duplex on internally
connected PHYs of the MT7988 built-in switch. This fixes links with
speeds other than 1000M.

Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/a5b04dfa8256d8302f402545a51ac4c626fdba25.1706071272.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26 14:18:39 -08:00
Eric Dumazet
8d975c15c0 ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
syzbot found __ip6_tnl_rcv() could access unitiliazed data [1].

Call pskb_inet_may_pull() to fix this, and initialize ipv6h
variable after this call as it can change skb->head.

[1]
 BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
 BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
 BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321
  __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
  INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
  IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321
  ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727
  __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845
  ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888
 gre_rcv+0x143f/0x1870
  ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438
  ip6_input_finish net/ipv6/ip6_input.c:483 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492
  ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586
  dst_input include/net/dst.h:461 [inline]
  ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310
  __netif_receive_skb_one_core net/core/dev.c:5532 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646
  netif_receive_skb_internal net/core/dev.c:5732 [inline]
  netif_receive_skb+0x58/0x660 net/core/dev.c:5791
  tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
  tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
  call_write_iter include/linux/fs.h:2084 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0x786/0x1200 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
  slab_alloc_node mm/slub.c:3478 [inline]
  kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
  __alloc_skb+0x318/0x740 net/core/skbuff.c:651
  alloc_skb include/linux/skbuff.h:1286 [inline]
  alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
  sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
  tun_alloc_skb drivers/net/tun.c:1531 [inline]
  tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846
  tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
  call_write_iter include/linux/fs.h:2084 [inline]
  new_sync_write fs/read_write.c:497 [inline]
  vfs_write+0x786/0x1200 fs/read_write.c:590
  ksys_write+0x20f/0x4c0 fs/read_write.c:643
  __do_sys_write fs/read_write.c:655 [inline]
  __se_sys_write fs/read_write.c:652 [inline]
  __x64_sys_write+0x93/0xd0 fs/read_write.c:652
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023

Fixes: 0d3c703a9d ("ipv6: Cleanup IPv6 tunnel receive path")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240125170557.2663942-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26 14:16:40 -08:00
Paolo Abeni
89abe62837 selftests: net: give more time for GRO aggregation
The gro.sh test-case relay on the gro_flush_timeout to ensure
that all the segments belonging to any given batch are properly
aggregated.

The other end, the sender is a user-space program transmitting
each packet with a separate write syscall. A busy host and/or
stracing the sender program can make the relevant segments reach
the GRO engine after the flush timeout triggers.

Give the GRO flush timeout more slack, to avoid sporadic self-tests
failures.

Fixes: 9af771d2ec ("selftests/net: allow GRO coalesce test on veth")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26 14:11:57 -08:00
Paolo Abeni
d3cb3b0088 selftests: net: add missing required classifier
the udpgro_fraglist self-test uses the BPF classifiers, but the
current net self-test configuration does not include it, causing
CI failures:

 # selftests: net: udpgro_frglist.sh
 # ipv6
 # tcp - over veth touching data
 # -l 4 -6 -D 2001:db8::1 -t rx -4 -t
 # Error: TC classifier not found.
 # We have an error talking to the kernel
 # Error: TC classifier not found.
 # We have an error talking to the kernel

Add the missing knob.

Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/7c3643763b331e9a400e1874fe089193c99a1c3f.1706170897.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26 14:09:30 -08:00
Breno Leitao
281cb9d65a bnxt_en: Make PTP timestamp HWRM more silent
commit 056bce63c4 ("bnxt_en: Make PTP TX timestamp HWRM query silent")
changed a netdev_err() to netdev_WARN_ONCE().

netdev_WARN_ONCE() is it generates a kernel WARNING, which is bad, for
the following reasons:

 * You do not a kernel warning if the firmware queries are late
 * In busy networks, timestamp query failures fairly regularly
 * A WARNING message doesn't bring much value, since the code path
is clear.
(This was discussed in-depth in [1])

Transform the netdev_WARN_ONCE() into a netdev_warn_once(), and print a
more well-behaved message, instead of a full WARN().

	bnxt_en 0000:67:00.0 eth0: TS query for TX timer failed rc = fffffff5

[1] Link: https://lore.kernel.org/all/ZbDj%2FFI4EJezcfd1@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Fixes: 056bce63c4 ("bnxt_en: Make PTP TX timestamp HWRM query silent")
Link: https://lore.kernel.org/r/20240125134104.2045573-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26 14:06:21 -08:00
Wen Gu
c3dfcdb65e net/smc: fix incorrect SMC-D link group matching logic
The logic to determine if SMC-D link group matches is incorrect. The
correct logic should be that it only returns true when the GID is the
same, and the SMC-D device is the same and the extended GID is the same
(in the case of virtual ISM).

It can be fixed by adding brackets around the conditional (or ternary)
operator expression. But for better readability and maintainability, it
has been changed to an if-else statement.

Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Closes: https://lore.kernel.org/r/13579588-eb9d-4626-a063-c0b77ed80f11@linux.ibm.com
Fixes: b40584d145 ("net/smc: compatible with 128-bits extended GID of virtual ISM device")
Link: https://lore.kernel.org/r/13579588-eb9d-4626-a063-c0b77ed80f11@linux.ibm.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125123916.77928-1-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26 14:06:05 -08:00
Tejun Heo
e563d0a7cd workqueue: Break up enum definitions and give names to the types
workqueue is collecting different sorts of enums into a single unnamed enum
type which can increase confusion around enum width. Also, unnamed enums
can't be accessed from BPF. Let's break up enum definitions according to
their purposes and give them type names.

Signed-off-by: Tejun Heo <tj@kernel.org>
2024-01-26 11:55:50 -10:00
Tejun Heo
6a229b0e2f workqueue: Drop unnecessary kick_pool() in create_worker()
After creating a new worker, create_worker() is calling kick_pool() to wake
up the new worker task. However, as kick_pool() doesn't do anything if there
is no work pending, it also calls wake_up_process() explicitly. There's no
reason to call kick_pool() at all. wake_up_process() is enough by itself.
Drop the unnecessary kick_pool() call.

Signed-off-by: Tejun Heo <tj@kernel.org>
2024-01-26 11:55:46 -10:00
Linus Torvalds
168174d781 drm fixes for 6.8-rc2
fb:
 - fix simpledrm/i915 regression by reverting change
 
 scheduler:
 - fix regression affecting amdgpu users due to sched draining
 
 nouveau:
 - revert 6.7 deadlock fix as it has side effects
 
 dp:
 - fix documentation warning
 
 ttm:
 - fix dummy page read on some platforms
 
 bridge:
 - anx7625 suspend fix
 - sii902x: fix probing and audio registration
 - parade-ps8640: fix suspend of bridge, aux fixes
 - samsung-dsim: avoid using FORCE_STOP_STATE
 
 panel:
 - simple add missing bus flags
 - fix samsung-s6d7aa0 flags
 
 amdgpu:
 - AC/DC power supply tracking fix
 - Don't show invalid vram vendor data
 - SMU 13.0.x fixes
 - GART fix for umr on systems without VRAM
 - GFX 10/11 UNORD_DISPATCH fixes
 - IPS display fixes (required for S0ix on some platforms)
 - Misc fixes
 
 i915:
 - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
 - Drop -Wstringop-overflow (broken on GCC11)
 
 ivpu:
 - fix recovery/reset support
 - improve submit ioctl stability
 - fix dev open/close races on unbind
 - PLL disable reset fix
 - deprecate context priority param
 - improve debug buffer logging
 - disable buffer sharing across VPU contexts
 - free buffer sgt on unbind
 - fix missing lock around shmem vmap
 - add better boot diagnostics
 - add more debug prints around mapping
 - dump MMU events in case of timeout
 
 v3d:
 - NULL ptr dereference fix
 
 exynos:
 - fix stack usage
 - fix incorrect type
 - fix dt typo
 - fix gsc runtime resume
 
 xe:
 - Make an ops struct static
 - Fix an implicit 0 to NULL conversion
 - A couple of 32-bit fixes
 - A migration coherency fix for Lunar Lake.
 - An error path vm id leak fix
 - Remove PVC references in kunit tests
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmWz/lsACgkQDHTzWXnE
 hr4m2Q/8DB5XlLPXQCW7xGwS6H546xItKZv32VxnqChl2qG7CIzLpqO1ZTQm8OtW
 QSE5Xc1kBG2qZeWV5vvtRn3wtwejgzIMBg1KUkDUXllAHGhifZfzti4J8muWXLIx
 ioL4pWefwnq/bhL4F0IzN7j1qSxxR0UyL/0WORvCjIIVBVG/QJpHbpM5gX/00qQE
 APPLJrrU+2dnAEHlKzFwCkp9bR1b2Tf6yRRh7p1gbLjkYS8rfy36BWFYdP6JC/a3
 EU1tPclLVJomt9rfPjhB33lD8DpBVGxi2cDjquMmrgLNPIuaOdD3Lk/awe7TKfiF
 g/ECLojJCIr50268cZ5X6Q1RvZZrbcorcG6EX2JzkP4sKI6fsc6XVPhtfXj59ysR
 jIRUp5eMKZPLF/FS2g68jFFos2HcNqopezNmo1pM/kT1FMT4k0N93PlW+Zr+Uhxx
 BEA2OsdCEXCwJLaLCXiRQkgpsvqyeRy7jK28J7CaY22bJFaRtGyzeSEcSrNb+nGI
 y+1Qqgy/7cSP4+yC7uOtytm/e20zzLt3lOsDPK3atHKa1X/HuWtm1gX2U4sGl9+A
 DChn2p5Xdl10SOt+f346kNGuJict59TGDsXD6ETsbmFG49VRZEzGhoSLZ7UYl90G
 NUBPS8dc6ctQnsLnOZ1iyp3NZxOGm+jLEPXb76Wt2sJPw4KBP1A=
 =eZEy
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Lots going on for rc2, ivpu has a bunch of stabilisation and debugging
  work, then amdgpu and xe are the main fixes. i915, exynos have a few,
  then some misc panel and bridge fixes.

  Worth mentioning are three regressions. One of the nouveau fixes in
  6.7 for a serious deadlock had side effects, so I guess we will bring
  back the deadlock until I can figure out what should be done properly.
  There was a scheduler regression vs amdgpu which was reported in a few
  places and is now fixed. There was an i915 vs simpledrm problem
  resulting in black screens, that is reverted also.

  I'll be working on a proper nouveau fix, it kinda looks like one of
  those cases where someone tried to use an atomic where they should
  have probably used a lock, but I'll see.

  fb:
   - fix simpledrm/i915 regression by reverting change

  scheduler:
   - fix regression affecting amdgpu users due to sched draining

  nouveau:
   - revert 6.7 deadlock fix as it has side effects

  dp:
   - fix documentation warning

  ttm:
   - fix dummy page read on some platforms

  bridge:
   - anx7625 suspend fix
   - sii902x: fix probing and audio registration
   - parade-ps8640: fix suspend of bridge, aux fixes
   - samsung-dsim: avoid using FORCE_STOP_STATE

  panel:
   - simple add missing bus flags
   - fix samsung-s6d7aa0 flags

  amdgpu:
   - AC/DC power supply tracking fix
   - Don't show invalid vram vendor data
   - SMU 13.0.x fixes
   - GART fix for umr on systems without VRAM
   - GFX 10/11 UNORD_DISPATCH fixes
   - IPS display fixes (required for S0ix on some platforms)
   - Misc fixes

  i915:
   - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix
   - Drop -Wstringop-overflow (broken on GCC11)

  ivpu:
   - fix recovery/reset support
   - improve submit ioctl stability
   - fix dev open/close races on unbind
   - PLL disable reset fix
   - deprecate context priority param
   - improve debug buffer logging
   - disable buffer sharing across VPU contexts
   - free buffer sgt on unbind
   - fix missing lock around shmem vmap
   - add better boot diagnostics
   - add more debug prints around mapping
   - dump MMU events in case of timeout

  v3d:
   - NULL ptr dereference fix

  exynos:
   - fix stack usage
   - fix incorrect type
   - fix dt typo
   - fix gsc runtime resume

  xe:
   - Make an ops struct static
   - Fix an implicit 0 to NULL conversion
   - A couple of 32-bit fixes
   - A migration coherency fix for Lunar Lake.
   - An error path vm id leak fix
   - Remove PVC references in kunit tests"

* tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits)
  Revert "nouveau: push event block/allowing out of the fence context"
  drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE
  drm/sched: Drain all entities in DRM sched run job worker
  drm/amd/display: "Enable IPS by default"
  drm/amd: Add a DC debug mask for IPS
  drm/amd/display: Disable ips before dc interrupt setting
  drm/amd/display: Replay + IPS + ABM in Full Screen VPB
  drm/amd/display: Add IPS checks before dcn register access
  drm/amd/display: Add Replay IPS register for DMUB command table
  drm/amd/display: Allow IPS2 during Replay
  drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs
  drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs
  drm/amd/amdgpu: Assign GART pages to AMD device mapping
  drm/amd/pm: Fetch current power limit from FW
  drm/amdgpu: Fix null pointer dereference
  drm/amdgpu: Show vram vendor only if available
  drm/amd/pm: update the power cap setting
  drm/amdgpu: Avoid fetching vram vendor information
  drm/amdgpu/pm: Fix the power source flag error
  drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions
  ...
2024-01-26 13:52:18 -08:00
Johan Hovold
d0266d7ab1 Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"
This reverts commit b43f7ddc2b.

The offending commit deferred power-supply class device registration
until the service-started notification is received.

This triggers a NULL pointer dereference during boot of the Lenovo
ThinkPad X13s and SC8280XP CRD as battery status notifications can be
received before the service-start notification:

	Unable to handle kernel NULL pointer dereference at virtual address 00000000000005c0
	...
	Call trace:
	 _acquire+0x338/0x2064
	 acquire+0x1e8/0x318
	 spin_lock_irqsave+0x60/0x88
	 _supply_changed+0x2c/0xa4
	 battmgr_callback+0x1d4/0x60c [qcom_battmgr]
	 pmic_glink_rpmsg_callback+0x5c/0xa4 [pmic_glink]
	 qcom_glink_native_rx+0x58c/0x7e8
	 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]
	 __handle_irq_event_percpu+0xb0/0x2d4
	 handle_irq_event+0x4c/0xb8

As trying to serialise this is non-trivial and risks missing
notifications, let's revert to registration during probe so that the
driver data is all set up once the service goes live.

The warning message during resume in case the aDSP firmware is not
running that motivated the change can be considered a feature and should
not be suppressed.

Fixes: b43f7ddc2b ("power: supply: qcom_battmgr: Register the power supplies after PDR is up")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240123160053.18331-1-johan+linaro@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-01-26 22:45:58 +01:00
Linus Torvalds
2047b0b275 asm-generic updates for 6.8, part 2
Just one patch this time, adding Andreas Larsson as co-maintainer
 for arch/sparc. He is volunteering to help since David Miller
 has become much less active over the past few years.
 
 In turn, I'm helping Andreas get set up as a new maintainer,
 starting with the entry in the MAINTAINERS file.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWz9JMACgkQYKtH/8kJ
 UifRuhAA4PHqGXoBSJtbklfxmq8bHKI564vlq1bpGRI1GgzRSau2z/kvl0jsr3vr
 Z9wTuYo1AhNCTJXkmJxQBu7pSWz/VpAPO4e1z71VbXUgaT5XgEzTPlmy2bp09jUj
 RuMDThLx78aZj1OvKTN0K46oPUx1TuuVnXVvsbXlu+y73cYFHX5n4JVXpLmQBW0Z
 CqHhS7rF7rcSrhxSJcQ/xk16PKAKx/FlcYUjqFS4wvHzGeAfe12z+n4wEqsrHObQ
 eb0KI5o9UBfF0aoESL8fVaWP2PD3mkBvbJjg63oatGGdviHNNjt3t/OGYjV+wI+t
 O7j2qR8Qbj2ED1fP75BMYtaO0VltFNBVhgQF6EeKp3g9yToHbosV9ojp65MJL9GP
 qU5EBfKtegAkTTi0zpxlZZyehOnwLrxgcb4Un8k+263QcsNUmpjqbLYmt+mw+PFK
 mwPLTbfUMn7QSANrP9KNQdCDkhgtrnt3GmPNJKL8MaA+HMiJ7A88jPWZgb2M2j7X
 9X1e5tHzeAoTHC/lZDqBDI6lm8LpyyHggqRxpMWCmxuXXn39sVXFslfnXMKJzZoc
 H0aLYw2yzaQVh0ngNFSlWvqq9ZzGdLgJqzr+3Pw/va5dikH0CuMf7fzakJl7YQzm
 4Nq5sF5WnQQSuE0d4Xj7bIx9XRpsYRLuBr4NQG3gjR3lqKWuFkc=
 =W8Sg
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic update from Arnd Bergmann:
 "Just one patch this time, adding Andreas Larsson as co-maintainer for
  arch/sparc. He is volunteering to help since David Miller has become
  much less active over the past few years.

  In turn, I'm helping Andreas get set up as a new maintainer, starting
  with the entry in the MAINTAINERS file"

* tag 'asm-generic-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  MAINTAINERS: Add Andreas Larsson as co-maintainer for arch/sparc
2024-01-26 13:22:59 -08:00
Linus Torvalds
ae971859f8 Arm SoC fixes for 6.8, part 1
There are a couple of devicetree fixes for samsung, riscv/sophgo, and for
 TPM device nodes on a couple of platforms.
 
 Both the Arm FF-A and the SCMI firmware drivers get a number of code fixes,
 addressing minor implementation bugs and compatibility with firmware
 implementations. Most of these bugs relate to the usage of xarray and
 rwlock structures and are fixed by Cristian Marussi.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWztJIACgkQYKtH/8kJ
 UieK0RAAwnrWf8R9vFiGPIrZILRdXI+Y1GGnPQiAMlOrb5SrcLJubhElLK/BHAdv
 w3IA5jJmyxia8VXkcKCN/dXaHYpjxXsk6vpAL/uCrIju2E8ArHfJKnjC0Hppl/ec
 DhY+Ds/SUqmpk3mrHtCgVs9mloNP50IzeNJhrU9ywsps58yG+LUA7SltUCa8pD5h
 eTRCe5vSGT4WDJvtiQyTUT3XmSIzP4VeIjrj4wtEezqv7PFmNWUDOJp3Yy8xGlFs
 Coibmd5OPa/CwA3C2agFZ/MFgZn/Pu4SA7kQgcNju/RKTYJrK2gaz+hoJ5fSCcYz
 5hjf4x/bKcw9mEgPUtfjeMDWpTq7iwhvl65RsUtZhRAada6/LwaKWMRNkXJw+cea
 hkCtn6aLP2VuOxvjAxOZGApy98Ztx4ZglN/w7EcuOxSMxGAcxNCqr/BdP0prunjb
 veuPqf0LuJMNLdmPKcBVkI74T6a6JySk6U/TzA9S1IBD/E435RHqt/s5b6E+jYeI
 HeEvK0s79vJlCMYrWyGIIzjNx02+f+3YvVjYC/JE1lodnWOuLey8VfxgGuNZ0uTq
 3XjF4atu9xFEQIyzDtN23znBhksYPIeBXRyZqYf/rKsAMWVWYp5Y3+Eg6mGFhfGg
 8zC921V/GzV+8XF1uC6tEHiWi917kUE0L/tsc4oWYEatsnTGZUg=
 =HrFc
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull arm SoC fixes from Arnd Bergmann:
 "There are a couple of devicetree fixes for samsung, riscv/sophgo, and
  for TPM device nodes on a couple of platforms.

  Both the Arm FF-A and the SCMI firmware drivers get a number of code
  fixes, addressing minor implementation bugs and compatibility with
  firmware implementations. Most of these bugs relate to the usage of
  xarray and rwlock structures and are fixed by Cristian Marussi"

* tag 'arm-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  riscv: dts: sophgo: separate sg2042 mtime and mtimecmp to fit aclint format
  arm64: dts: Fix TPM schema violations
  ARM: dts: Fix TPM schema violations
  ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
  arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
  firmware: arm_ffa: Handle partitions setup failures
  firmware: arm_ffa: Use xa_insert() and check for result
  firmware: arm_ffa: Simplify ffa_partitions_cleanup()
  firmware: arm_ffa: Check xa_load() return value
  firmware: arm_ffa: Add missing rwlock_init() for the driver partition
  firmware: arm_ffa: Add missing rwlock_init() in ffa_setup_partitions()
  firmware: arm_scmi: Fix the clock protocol supported version
  firmware: arm_scmi: Fix the clock protocol version for v3.2
  firmware: arm_scmi: Use xa_insert() when saving raw queues
  firmware: arm_scmi: Use xa_insert() to store opps
  firmware: arm_scmi: Replace asm-generic/bug.h with linux/bug.h
  firmware: arm_scmi: Check mailbox/SMT channel for consistency
2024-01-26 13:09:38 -08:00
Konstantin Aladyshev
c60fe56c16 hwmon: (pmbus/mp2975) Fix driver initialization for MP2975 device
The commit 1feb31e810 ("hwmon: (pmbus/mp2975) Simplify VOUT code")
has introduced a bug that makes it impossible to initialize MP2975
device:
"""
mp2975 5-0020: Failed to identify chip capabilities
i2c i2c-5: new_device: Instantiated device mp2975 at 0x20
i2c i2c-5: delete_device: Deleting device mp2975 at 0x20
"""
Since the 'read_byte_data' function was removed from the
'pmbus_driver_info ' structure the driver no longer reports correctly
that VOUT mode is direct. Therefore 'pmbus_identify_common' fails
with error, making it impossible to initialize the device.

Restore 'read_byte_data' function to fix the issue.

Tested:
- before: it is not possible to initialize MP2975 device with the
'mp2975' driver,
- after: 'mp2975' correctly initializes MP2975 device and all sensor
data is correct.

Fixes: 1feb31e810 ("hwmon: (pmbus/mp2975) Simplify VOUT code")
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20240126205714.2363-1-aladyshev22@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-26 13:07:10 -08:00
Linus Torvalds
48fa8ec615 spi: Fixes for v6.8
As well as a few device IDs and the usual scattering of driver specific
 fixes this contains a couple of core things.  One is a missed case in
 error handling, the other patch is a change from me raising the number
 of chip selects allowed by the newly added multi chip select support
 patches to resolve problems seen on several systems that exceeded the
 limit.  This is not a real solution to the issue but rather just a
 change to avoid disruption to users, one of the options I am considering
 is just sending a revert of those changes if we can't come up with
 something sensible.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWz7e0ACgkQJNaLcl1U
 h9BOrAf/UwWplCW+rCznfkb8uAuShKlJux+RtAJZG8A70JeC3jsdN66yUyxmfrIY
 5qKtqcPA3VXdM8OQ/3r8tk/q+/2sXESLotefwKvONYrZYmq61lA+rayUiNDQjicJ
 devvPLns72ZKu3VpsdFAoXzA+mL8Byp65lBqW5dHVyt0itY1Ap2Zdi8CNSzEVLLs
 3Qhe26yy8sxILQZ6N4TSNYMV7l6yn3AjZ5kUDFi/CA1AWTTfazpioCAyADa3iTpR
 1i0zsMzeDEL0iu8gWuB62mqftwY5ua3NaSmpxWPebG4VtMXqu62PwQugiqmq+gDc
 bA0SLlzR4xub7dtyhEjmsCbn4pvafw==
 =RQ5N
 -----END PGP SIGNATURE-----

Merge tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "As well as a few device IDs and the usual scattering of driver
  specific fixes this contains a couple of core things.

  One is a missed case in error handling, the other patch is a change
  from me raising the number of chip selects allowed by the newly added
  multi chip select support patches to resolve problems seen on several
  systems that exceeded the limit.

  This is not a real solution to the issue but rather just a change to
  avoid disruption to users, one of the options I am considering is just
  sending a revert of those changes if we can't come up with something
  sensible"

* tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix finalize message on error return
  spi: cs42l43: Handle error from devm_pm_runtime_enable
  spi: Raise limit on number of chip selects
  spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
  spi: spi-cadence: Reverse the order of interleaved write and read operations
  spi: spi-imx: Use dev_err_probe for failed DMA channel requests
  spi: bcm-qspi: fix SFDP BFPT read by usig mspi read
  spi: intel-pci: Add support for Arrow Lake SPI serial flash
  spi: intel-pci: Remove Meteor Lake-S SoC PCI ID from the list
2024-01-26 12:29:04 -08:00
Linus Torvalds
5f91b9ba5a gpio fixes for v6.8-rc2
- add a quirk to GPIO ACPI handling to ignore touchpad wakeups
   on GPD G1619-04
 - clear interrupt status bits (that may have been set before enabling
   the interrupts) after setting the interrupt type in gpio-eic-sprd
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmWzpkkACgkQEacuoBRx
 13JGvxAA2rikf+Zn0oKjh2lJUno6/CLQgHqwDut2ZzveW9EVw5+HCLiq/kI3DVnx
 lmFH0gT8XhGQRF40+zSnNRITFL1kyAhnPOdkvWbB6I/lWOrl2QDHm7TDeZiNhnjB
 IJA4KjJe+1TF+148f/NFR/HcTPIYPEEsiYdPvDBCBAD9vkT7ki5RziVYl6P04cs6
 XNhbats5LPFqhaHepcTd31aBN/l86GqmDYZeNukwb8h17uXAPIpmvqGvM/RGhCM+
 ZLsIOK2LFcmXty0BXzgxHGLqGqxJCAZuz8RQSnLFJK311eAEyQa6U19/UPBvtRiB
 U9sT9ciIYPCaUxkI8HfgBmQ3wfu6s9AojiYTyZH4WZA6MybKauW2T1bVssdy4ojL
 yTpW6HM/84EEVFUXGJ4L2woSihvIHiIptXz6aHbByrkMSNogMYGTWQ05q9AO5KNQ
 NK2nj2XOss3LN9mIe4Xuv5KxR+VSuFAwnNDIQb1kBlt07YaIDuC3lwKzzZNtUhCm
 ZJpQLQyTTXVHylTY2SVTIdmFlpyIfqcaePjxPvvtpr+tKUWugJhSephC7A2GKwoo
 don0cEvsG23lDI2wgL0PZwZkc02AHNXINBX1KpghzGlTe9njO3/RsmWdkCe7elDp
 CuVf6X7BJF9UcaVkWnrbgn2FWa4bpIYjKgRfiQlguGiX5xU5iCg=
 =CWRK
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - add a quirk to GPIO ACPI handling to ignore touchpad wakeups on GPD
   G1619-04

 - clear interrupt status bits (that may have been set before enabling
   the interrupts) after setting the interrupt type in gpio-eic-sprd

* tag 'gpio-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: eic-sprd: Clear interrupt after set the interrupt type
  gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04
2024-01-26 12:26:02 -08:00
Matthew Brost
d688b86a29 drm/xe/guc: Flush G2H handler when turning off CTs
Make sure G2H handler is not running when changing the CT state to drop
messages or disabled. This will help prevent races in the code ensuring
that G2H are not being processed after changing the state.

v2:
- s/flush_g2h_handler/stop_g2h_handler (Michal)

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo remove the extra line while pushing]
Link: https://patchwork.freedesktop.org/patch/msgid/20240122210156.1517444-4-matthew.brost@intel.com
2024-01-26 15:14:01 -05:00
Matthew Brost
83a7173bac drm/xe: Move TLB invalidation reset before HW reset
This is a software reset which can be done immediately after stopping
the UC.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122210156.1517444-3-matthew.brost@intel.com
2024-01-26 15:12:29 -05:00
Matthew Brost
dc75d03716 drm/xe/guc: Add more GuC CT states
The Guc CT has more than enabled / disables states rather it has 4. The
4 states are not initialized, disabled, stopped, and enabled. Change the
code to reflect this. These states will enable proper return codes from
functions and therefore enable proper error messages.

v2:
- s/XE_GUC_CT_STATE_DROP_MESSAGES/XE_GUC_CT_STATE_STOPPED (Michal)
- Add assert for CT being initialized (Michal)
- Fix kernel for CT state enum (Michal)

v3:
- Kernel doc (Michal)
- s/reiecved/received (Michal)
- assert CT state not initialized in xe_guc_ct_init (Michal)
- add argument xe_guc_ct_set_state to clear g2h (Michal)

v4:
- Drop clear_outstanding_g2h argument (Michal)

v5:
- Move xa_destroy outside of fast lock (CI)

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122210156.1517444-2-matthew.brost@intel.com
2024-01-26 15:12:28 -05:00
Linus Torvalds
4aeb083707 media fixes for v6.8-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmWzgg8ACgkQCF8+vY7k
 4RV1cg/+JtxkyWHOTLjRBw/j0PsSGvSJJEGw0eGU2+YYRbuZ/f9JxfnEKhuRpXte
 qJNIjWTIIx/jActFYKRRxDtIHM0aIUlTp5N2pNlva71+nyWRO2Do1W2QXnBz6AJQ
 eENWbYIEe1d2Lb5r9kqSUTegpcfTITlaS3vcLH5n7QImDUT/+tfkN1tSRPVZN/gm
 mrx04nw+T6elcfPiWFLlY1+TgWSddhD4ipWemt5fIdh5PXEM9EqvX6hMZcD4nzOQ
 R5Hth9YRK1Qj0ETYGfgFsc+oCi60hirZjmJxQcafFBMqxHysbRh9haOu/szPMzpa
 leqgKEKAEU52nI9LqcVEin00UBNJL6KkvkkjA+w1xo94Y/vjXKXytrKAX9REYzI3
 75MEs/M1nAcIuvV0K9RgoYKERhUJree2SA95q2gu5voZbzzJXS15DdSRScV5K2Yx
 EVsm2Jfy5JxECpHjTZ8e+0ax+pUynUu+BCf9aTZJGxJZwueOmIWJqLturjL8e1MM
 aqzmywBQJgR7IoyiDXihlt055DVQdRbDD9pWDi0sra/sFcXTE9mH9eSfk6jGHLLj
 P228V6dB8lnod274K7BOkhzxJ5AUs53PtF9F4ibPLPQlEyoFSNsCDr3SUKdC/9C8
 buQHuKrI4F2Oc6f0CWsA/fRvS1MCYvBAM0ZG7O7Tq5nVUoFczZk=
 =PGQI
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - remove K3 DT prefix from wave5

 - vb2 core: fix missing caps on VIDIO_CREATE_BUFS under certain
   circumstances

 - videobuf2: Stop direct calls to queue num_buffers field

* tag 'media/v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: vb2: refactor setting flags and caps, fix missing cap
  media: media videobuf2: Stop direct calls to queue num_buffers field
  media: chips-media: wave5: Remove K3 References
  dt-bindings: media: Remove K3 Family Prefix from Compatible
2024-01-26 12:11:49 -08:00
Masami Hiramatsu (Google)
0958b33ef5 tracing/trigger: Fix to return error if failed to alloc snapshot
Fix register_snapshot_trigger() to return error code if it failed to
allocate a snapshot instead of 0 (success). Unless that, it will register
snapshot trigger without an error.

Link: https://lore.kernel.org/linux-trace-kernel/170622977792.270660.2789298642759362200.stgit@devnote2

Fixes: 0bbe7f7199 ("tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation")
Cc: stable@vger.kernel.org
Cc: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-01-26 15:10:24 -05:00
Paolo Abeni
fcf67d82b8 selftests: net: add missing config for big tcp tests
The big_tcp test-case requires a few kernel knobs currently
not specified in the net selftests config, causing the
following failure:

  # selftests: net: big_tcp.sh
  # Error: Failed to load TC action module.
  # We have an error talking to the kernel
...
  # Testing for BIG TCP:
  # CLI GSO | GW GRO | GW GSO | SER GRO
  # ./big_tcp.sh: line 107: test: !=: unary operator expected
...
  # on        on       on       on      : [FAIL_on_link1]

Add the missing configs

Fixes: 6bb382bcf7 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26 11:53:15 -08:00
Phoenix Chen
1abdf288b0 platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
Add touch screen info for TECLAST X16 Plus tablet.

Signed-off-by: Phoenix Chen <asbeltogf@gmail.com>
Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26 20:21:47 +01:00
Jithu Joseph
8c898ec07a platform/x86/intel/ifs: Call release_firmware() when handling errors.
Missing release_firmware() due to error handling blocked any future image
loading.

Fix the return code and release_fiwmare() to release the bad image.

Fixes: 25a76dbb36 ("platform/x86/intel/ifs: Validate image size")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240125082254.424859-2-ashok.raj@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26 20:12:16 +01:00
Cong Liu
a692a86efe platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()
amd_pmf_get_pb_data() will allocate memory for the policy buffer,
but does not free it if copy_from_user() fails. This leads to a memory
leak.

Fixes: 10817f28e5 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Link: https://lore.kernel.org/r/20240124012939.6550-1-liucong2@kylinos.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26 20:12:16 +01:00
Shyam Sundar S K
cedecdba60 platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
AMD SFH driver has APIs defined to export the ambient light information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240123141458.3715211-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26 20:12:05 +01:00
Zack Rusin
71ce046327 drm/ttm: Make sure the mapped tt pages are decrypted when needed
Some drivers require the mapped tt pages to be decrypted. In an ideal
world this would have been handled by the dma layer, but the TTM page
fault handling would have to be rewritten to able to do that.

A side-effect of the TTM page fault handling is using a dma allocation
per order (via ttm_pool_alloc_page) which makes it impossible to just
trivially use dma_mmap_attrs. As a result ttm has to be very careful
about trying to make its pgprot for the mapped tt pages match what
the dma layer thinks it is. At the ttm layer it's possible to
deduce the requirement to have tt pages decrypted by checking
whether coherent dma allocations have been requested and the system
is running with confidential computing technologies.

This approach isn't ideal but keeping TTM matching DMAs expectations
for the page properties is in general fragile, unfortunately proper
fix would require a rewrite of TTM's page fault handling.

Fixes vmwgfx with SEV enabled.

v2: Explicitly include cc_platform.h
v3: Use CC_ATTR_GUEST_MEM_ENCRYPT instead of CC_ATTR_MEM_ENCRYPT to
limit the scope to guests and log when memory decryption is enabled.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 3bf3710e37 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20230926040359.3040017-1-zack@kde.org
2024-01-26 14:10:52 -05:00
Shyam Sundar S K
118063f380 platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
AMD SFH driver has APIs defined to export the human presence information;
use this within the PMF driver to send inputs to the PMF TA, so that PMF
driver can enact to the actions coming from the TA.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240123141458.3715211-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-01-26 20:09:41 +01:00
Tiezhu Yang
fa7178b0f1 selftests/bpf: Add missing line break in test_verifier
There are no break lines in the test log for test_verifier #106 ~ #111
if jit is disabled, add the missing line break at the end of printf()
to fix it.

Without this patch:

  [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
  [root@linux bpf]# ./test_verifier 106
  #106/p inline simple bpf_loop call SKIP (requires BPF JIT)Summary: 0 PASSED, 1 SKIPPED, 0 FAILED

With this patch:

  [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
  [root@linux bpf]# ./test_verifier 106
  #106/p inline simple bpf_loop call SKIP (requires BPF JIT)
  Summary: 0 PASSED, 1 SKIPPED, 0 FAILED

Fixes: 0b50478fd8 ("selftests/bpf: Skip callback tests if jit is disabled in test_verifier")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240126015736.655-1-yangtiezhu@loongson.cn
2024-01-26 11:09:32 -08:00
Zack Rusin
517621b706 drm/vmwgfx: Fix possible null pointer derefence with invalid contexts
vmw_context_cotable can return either an error or a null pointer and its
usage sometimes went unchecked. Subsequent code would then try to access
either a null pointer or an error value.

The invalid dereferences were only possible with malformed userspace
apps which never properly initialized the rendering contexts.

Check the results of vmw_context_cotable to fix the invalid derefs.

Thanks:
ziming zhang(@ezrak1e) from Ant Group Light-Year Security Lab
who was the first person to discover it.
Niels De Graef who reported it and helped to track down the poc.

Fixes: 9c079b8ce8 ("drm/vmwgfx: Adapt execbuf to the new validation api")
Cc: <stable@vger.kernel.org> # v4.20+
Reported-by: Niels De Graef  <ndegraef@redhat.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: Martin Krastev <martin.krastev@broadcom.com>
Cc: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Cc: Ian Forbes <ian.forbes@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110200305.94086-1-zack.rusin@broadcom.com
2024-01-26 13:48:06 -05:00
Harshit Mogalapalli
97aab852c4 hwmon: gigabyte_waterforce: Fix locking bug in waterforce_get_status()
Goto 'unlock_and_return' for unlocking before returning on the error
path.

Fixes: d5939a793693 ("hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolers")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240122154952.2851934-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-26 10:39:53 -08:00
Rafael J. Wysocki
9cb1c9820f PM: sleep: Relocate two device PM core functions
Move is_async() and dpm_async_fn() in the PM core to a more suitable
place.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2024-01-26 19:38:36 +01:00
Rafael J. Wysocki
86686b8f7a PM: sleep: Simplify dpm_suspended_list walk in dpm_resume()
Notice that devices can be moved to dpm_prepared_list before running
their resume callbacks, in analogy with dpm_noirq_resume_devices() and
dpm_resume_early(), because doing so will not affect the final ordering
of that list.

Namely, if a device is the first dpm_suspended_list entry while
dpm_list_mtx is held, it has not been removed so far and it cannot be
removed until dpm_list_mtx is released, so moving it to dpm_prepared_list
at that point is valid.  If it is removed later, while its resume
callback is running, it will be deleted from dpm_prepared_list without
changing the ordering of the other devices in that list.

Accordingly, rearrange the while () loop in dpm_resume() to move
devices to dpm_prepared_list before running their resume callbacks and
implify the locking and device reference counting in it.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
2024-01-26 19:38:36 +01:00
Rafael J. Wysocki
f3bdd82c58 Merge branch 'pm-cpufreq'
Merge cpufreq fixes for 6.8-rc2:

 - Fix the handling of scaling_max/min_freq sysfs attributes in the AMD
   P-state cpufreq driver (Mario Limonciello).

 - Make the intel_pstate cpufreq driver avoid unnecessary computation of
   the HWP performance level corresponding to a given frequency in the
   cases when it is known already, which also helps to avoid reducing
   the maximum CPU capacity artificially on some systems (Rafael J.
   Wysocki).

* pm-cpufreq:
  cpufreq/amd-pstate: Fix setting scaling max/min freq values
  cpufreq: intel_pstate: Refine computation of P-state for given frequency
2024-01-26 19:16:48 +01:00
Dave Airlie
987940f057 One regression fixup to samsung-dsim.c module
- The FORCE_STOP_STATE bit is ineffective for forcing DSI link into LP-11 mode,
   causing timing issues and potential bridge failures.
   This patch reverts previous commits and corrects this issue.
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEoxi+6c5pRPV/gdXcxWAb7Og/+bYFAmWzujEACgkQxWAb7Og/
 +bbjfgwAyre4Ndo1zyOQ1ba0P86mWobNQAAk6SnkJZtfngtu8O37uJdetzNHoKgW
 ziHD4OHuLGX3BgXfcJdSi1msKxnO2+PvEu3WTRsOh1BMyWnZhCzUehRuMZPwrN4D
 w+InvXCy9xwjBBQHF6nxHg3sJncNCyvGm3V21ABrMFnAr6B4blW6a0RtHmR8k0M0
 Z6EI5Lsj1ngfnN3QDqUQN+oKfnXTZCNgzDcsCqXAIfDf5srjv+kcRK7ab8goV4dA
 N2VvwFocbfbI96tFO733hyH9XV6Z9jgB3J5gQF5BQABQmhE/dlvlfhKU7V+EEIUj
 gY9ABmHp1aada5nuzEW0vVT2Kw7qWcBEJpDGHkGLCHP5B3SLI/uIfm/o+JpTgZdt
 mdlStjyJDzpDYI9xJdiJkg4KVCRy53hXvIkJYyEm73WEnd/SsiSCM+xDK5HDGp/9
 rTuOKnGiRmPwNvpiYnKRUTIdXY/84LgiylSdoSQ1IBw/+wkBcbugGz5bjKIhcsoZ
 UEckhMhx
 =0i9u
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

One regression fixup to samsung-dsim.c module
- The FORCE_STOP_STATE bit is ineffective for forcing DSI link into LP-11 mode,
  causing timing issues and potential bridge failures.
  This patch reverts previous commits and corrects this issue.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126141130.15512-1-inki.dae@samsung.com
2024-01-27 04:12:21 +10:00
Dave Thaler
e48f0f4a9b bpf, docs: Clarify definitions of various instructions
Clarify definitions of several instructions:

* BPF_NEG does not support BPF_X
* BPF_CALL does not support BPF_JMP32 or BPF_X
* BPF_EXIT does not support BPF_X
* BPF_JA does not support BPF_X (was implied but not explicitly stated)

Also fix a typo in the wide instruction figure where the field is
actually named "opcode" not "code".

Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240126040050.8464-1-dthaler1968@gmail.com
2024-01-26 19:05:38 +01:00
Dave Airlie
4d7acc8f48 Revert "nouveau: push event block/allowing out of the fence context"
This reverts commit eacabb5462.

This commit causes some regressions in desktop usage, this will
reintroduce the original deadlock in DRI_PRIME situations, I've
got an idea to fix it by offloading to a workqueue in a different
spot, however this code has a race condition where we sometimes
miss interrupts so I'd like to fix that as well.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-01-27 04:04:34 +10:00
Paolo Bonzini
11f5633209 KVM/riscv changes for 6.8 part #2
- Zbc extension support for Guest/VM
 - Scalar crypto extensions support for Guest/VM
 - Vector crypto extensions support for Guest/VM
 - Zfh[min] extensions support for Guest/VM
 - Zihintntl extension support for Guest/VM
 - Zvfh[min] extensions support for Guest/VM
 - Zfa extension support for Guest/VM
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmWqB5gACgkQrUjsVaLH
 LAfeCg/7Bu5AOZQlTkgFjlUB7dh/i1iZLb+zT5S45VLxZQ0WE+8M0Vc9nQF+ekpc
 Fp3bc7+n/CLWMmZMNQkW7LO+6vSoOCTWYuf7sQB8enYB/SPO68WiBxIgZ9kYmUUv
 vT3frLk7eNIiCcL+c+4hwxXDomVxgO8wTqoJtYVBLxWS0E4q2NsaLRH+rN+9+4vr
 P5Xe7JkCmjIUQezDvczM/I5MOT39VSC1aaWF2A+edw+gbK2u1wylOeUhGr6d4jkU
 SR3vU+oUixZNGMigZtQOurWmH8ThmGiGKnPsJ2gI8XG0ntdHtANHEFgEGUsS7Z51
 kZWDn2QS65xKdi0kAUTuh9pc6cnRqdY4L4DWfrF+RovDUTCeqL62FSohaarDEpME
 8e84y9hPeMxFKUGYwc5a/nn81g6Mujq4RWD81jbW33ZxOryIO0aqMBAYQx/H5K1Y
 0+0UQvUzAZItimVF+mkqpDftGfGYsrmA1cTtDLIBywYhspOTpqQbOlLLJV0qmz5S
 QY/mVidAZWBE4wb62GOHA+tyslm0oHjql7a9ydxyywm+AljmFafYWjddoRzl7vCZ
 pqcNhsBQtMJAXfDzrqIUhE+eRVT0Hx/U6NFKQY2YohOPWQy3a8Rd2bfkt/WeJFNf
 7YtMr9HbOb5tQ9iKQtkjwj/Kg2eX3DS+PGG8GTY5DcGSFqLfqIY=
 =ncXm
 -----END PGP SIGNATURE-----

Merge tag 'kvm-riscv-6.8-2' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.8 part #2

- Zbc extension support for Guest/VM
- Scalar crypto extensions support for Guest/VM
- Vector crypto extensions support for Guest/VM
- Zfh[min] extensions support for Guest/VM
- Zihintntl extension support for Guest/VM
- Zvfh[min] extensions support for Guest/VM
- Zfa extension support for Guest/VM
2024-01-26 12:58:26 -05:00
Dave Airlie
9c4a1126ad Merge tag 'drm-intel-fixes-2024-01-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- PSR fix for HSW

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZbPGBL9lj4DxxIW1@jlahtine-mobl.ger.corp.intel.com
2024-01-27 03:58:24 +10:00
Dave Airlie
ddd2b472a1 Plenty of ivpu fixes to improve the general stability and debugging, a
suspend fix for the anx7625 bridge, a revert to fix an initialization
 order bug between i915 and simpledrm and a documentation warning fix for
 dp_mst.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZbOa5gAKCRDj7w1vZxhR
 xWnhAP49DzoYirglHMErptDWnvKY89n2hQiDRHcSPCEzK44vBAD/ZoNYqnUXCweH
 CtvIN8x5/fB2iY3j5Za6vwK41zlkgw0=
 =QASf
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2024-01-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Plenty of ivpu fixes to improve the general stability and debugging, a
suspend fix for the anx7625 bridge, a revert to fix an initialization
order bug between i915 and simpledrm and a documentation warning fix for
dp_mst.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tp77e5fokigup6cgmpq6mtg46kzdw2dpze6smpnwfoml4kmwpq@bo6mbkezpkle
2024-01-27 03:57:58 +10:00
Paolo Bonzini
3f5198c7f6 pqap instruction missing cc fix
vsie shadow creation race fix
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmWuk3oACgkQ41TmuOI4
 ufgUgA/+J3io5etMjY6/NMtUT0pJAb3Z4LtW8795+glGmtQ1fS4HC/rnr8eA6VEx
 OoN16Yh2WyeqzwRpPW5TVXOgxOswaB2rgdY3waBJtyoO/0MjfhSGXju15vjYfP6S
 QO5p2NNNkzIBIgsQfhkVUiWTAa3IswulHdz74OonGaKYLzf/IUrKJQg8OKYtfnzk
 uIeW2Om8weXT8VLTsm1koJ3EFadARcc4chLLj/QX7uVs4zQ2IT1zgmJhfzW3+/4g
 ATHXKkbuGT+dQEZJF8BcRX42gFCYynXlwMBGeb3mEtqXQE9gBB1/IsyrOgt/zsuO
 Nh5cpN00Xxb50tbmODeTj1WLhAXnbn5Qlg+ZOeOZuIp12X0OP8PHXFq99kqp3s2w
 lCFuO0OBS2atmUlm7ik3J/FW9KUq4pdaDOw1MJjwTCh+0cf4Vn5mtMLkcBfGkX6s
 c6Uc//RHkXV0BRFbqTQdk4cRTft3P5x2TKxW/kkmSBxOTn9OKgJPN03yu0XQ2DNJ
 7wLyxWlNMMK0PTLFZo5DUVuiKRUZBrw2sXa2pn7q4OMYbyK+7a46c/vu4xLBqusm
 NU75elRY9gBad3Kd3NR3EkEz5ltu0oo/wFy47biSDHv8a2jtb4UCQ5q3Ao+fu5XA
 eh1yyX4ZhNYtJeB5Qk3jkajZRjoj8Lw5JanFk53/wVe4ZWZDAvc=
 =8K58
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

pqap instruction missing cc fix
vsie shadow creation race fix
2024-01-26 12:57:12 -05:00
Johan Hovold
00aab7dcb2 HID: i2c-hid-of: fix NULL-deref on failed power up
A while back the I2C HID implementation was split in an ACPI and OF
part, but the new OF driver never initialises the client pointer which
is dereferenced on power-up failures.

Fixes: b33752c300 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules")
Cc: stable@vger.kernel.org      # 5.12
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-26 18:52:14 +01:00
Ian Forbes
f3e17b42b2 drm/vmwgfx: Add SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 to command array.
Without this definition device errors will display the command name
as (null) when debug logging is enabled.

Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108211655.13187-1-ian.forbes@broadcom.com
2024-01-26 12:50:43 -05:00