Commits 0077a504e1 ("ahci: asm1166: correct count of reported ports")
and 9815e39617 ("ahci: asm1064: correct count of reported ports")
attempted to limit the ports of the ASM1166 and ASM1064 AHCI controllers
to avoid long boot times caused by the fact that these adapters report
a port map larger than the number of physical ports. The excess ports
are "virtual" to hide port multiplier devices and probing these ports
takes time. However, these commits caused a regression for users that do
use PMP devices, as the ATA devices connected to the PMP cannot be
scanned. These commits have thus been reverted by commit 6cd8adc3e1
("ahci: asm1064: asm1166: don't limit reported ports") to allow the
discovery of devices connected through a port multiplier. But this
revert re-introduced the long boot times for users that do not use a
port multiplier setup.
This patch adds the mask_port_map ahci module parameter to allow users
to manually specify port map masks for controllers. In the case of the
ASMedia 1166 and 1064 controllers, users that do not have port
multiplier devices can mask the excess virtual ports exposed by the
controller to speedup port scanning, thus reducing boot time.
The mask_port_map parameter accepts 2 different formats:
- mask_port_map=<mask>
This applies the same mask to all AHCI controllers
present in the system. This format is convenient for small systems
that have only a single AHCI controller.
- mask_port_map=<pci_dev>=<mask>,<pci_dev>=mask,...
This applies the specified masks only to the PCI device listed. The
<pci_dev> field is a regular PCI device ID (domain🚌dev.func).
This ID can be seen following "ahci" in the kernel messages. E.g.
for "ahci 0000:01:00.0: 2/2 ports implemented (port mask 0x3)", the
<pci_dev> field is "0000:01:00.0".
When used, the function ahci_save_initial_config() indicates that a
port map mask was applied with the message "masking port_map ...".
E.g.: without a mask:
modprobe ahci
dmesg | grep ahci
...
ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
ahci 0000:00:17.0: (0000:00:17.0) 8/8 ports implemented (port mask 0xff)
With a mask:
modprobe ahci mask_port_map=0000:00:17.0=0x1
dmesg | grep ahci
...
ahci 0000:00:17.0: masking port_map 0xff -> 0x1
ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
ahci 0000:00:17.0: (0000:00:17.0) 1/8 ports implemented (port mask 0x1)
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Xe_LP has six sublices per slice.
v2: fixed commit message and subject (Matt)
Bspec: 66696
Fixes: bde5d76785 ("drm/xe: Add helper macro to loop each DSS")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405-mcr_adlp-v2-1-2fd1e4325ef2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit c0e0f13935 ("drm: Make drivers depends on DRM_DW_HDMI") turned
select dependencies into depends on ones. However, DRM_DW_HDMI was not
manually selectable which resulted in no way to enable the drivers that
were now depending on it.
Fixes: 4fc8cb47fc ("drm/display: Move HDMI helpers into display-helper module")
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403-fix-dw-hdmi-kconfig-v1-2-afbc4a835c38@kernel.org
The DisplayPort helpers rely on some
(__drm_atomic_helper_private_obj_duplicate_state,
drm_kms_helper_hotplug_event) helpers found in files compiled by
DRM_KMS_HELPER.
Prior to commit d674858ff9 ("drm/display: Make all helpers visible and
switch to depends on"), DRM_DISPLAY_DP_HELPER was only selectable so it
wasn't really a big deal. However, since that commit, it's now something
that can be enabled as is, and since there's no expressed dependency
with DRM_KMS_HELPER, it can break too.
Since DRM_KMS_HELPER is a selectable option for now, let's select it for
DRM_DISPLAY_DP_HELPER.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404021556.0JVcNC13-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202404021700.LbyYZGFd-lkp@intel.com/
Fixes: d674858ff9 ("drm/display: Make all helpers visible and switch to depends on")
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403-fix-dw-hdmi-kconfig-v1-1-afbc4a835c38@kernel.org
Commit 4b6f4c5a67 ("timer/migration: Remove buggy early return on
deactivation") removed the logic to return early in tmigr_update_events()
on deactivation. With this the problem with a not properly updated first
global event in a hierarchy containing only a single group was fixed.
But when having a look at this code path with a hierarchy with more than a
single level, now unnecessary work is done (example is partially copied
from the message of the commit mentioned above):
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0i, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = 0 migrator = NONE
active = 0 active = NONE
nextevt = T0i, T1 nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
active idle idle idle
0) CPU 0 is active thus its event is ignored (the letter 'i') and so are
upper levels' events. CPU 1 is idle and has the timer T1 enqueued.
CPU 2 also has a timer. The expiry order is T0 (ignored) < T1 < T2
[GRP1:0]
migrator = GRP0:0
active = GRP0:0
nextevt = T0:0i, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T1 nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
idle idle idle idle
1) CPU 0 goes idle without global event queued. Therefore KTIME_MAX is
pushed as its next expiry and its own event kept as "ignore". Without this
early return the following steps happen in tmigr_update_events() when
child = null and group = GRP0:0 :
lock(GRP0:0->lock);
timerqueue_del(GRP0:0, T0i);
unlock(GRP0:0->lock);
[GRP1:0]
migrator = NONE
active = NONE
nextevt = T0:0, T0:1
/ \
[GRP0:0] [GRP0:1]
migrator = NONE migrator = NONE
active = NONE active = NONE
nextevt = T1 nextevt = T2
/ \ / \
0 (T0i) 1 (T1) 2 (T2) 3
idle idle idle idle
2) The change now propagates up to the top. Then tmigr_update_events()
updates the group event of GRP0:0 and executes the following steps
(child = GRP0:0 and group = GRP0:0):
lock(GRP0:0->lock);
lock(GRP1:0->lock);
evt = tmigr_next_groupevt(GRP0:0); -> this removes the ignored events
in GRP0:0
... update GRP1:0 group event and timerqueue ...
unlock(GRP1:0->lock);
unlock(GRP0:0->lock);
So the dance in 1) with locking the GRP0:0->lock and removing the T0i from
the timerqueue is redundand as this is done nevertheless in 2) when
tmigr_next_groupevt(GRP0:0) is executed.
Revert commit 4b6f4c5a67 ("timer/migration: Remove buggy early return on
deactivation") and add a condition into return path to skip the return
only, when hierarchy contains a single group. Adapt comments accordingly.
Fixes: 4b6f4c5a67 ("timer/migration: Remove buggy early return on deactivation")
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87cyr49on2.fsf@somnus
When a group event is updated with its expiry unchanged but a different
CPU, that target change may go unnoticed and the event may be propagated
up with a stale CPU value. The following depicts a scenario that has
been actually observed:
[GRP2:0]
migrator = GRP1:1
active = GRP1:1
nextevt = TGRP1:0 (T0)
/ \
[GRP1:0] [GRP1:1]
migrator = NONE [...]
active = NONE
nextevt = TGRP0:0 (T0)
/ \
[GRP0:0] [...]
migrator = NONE
active = NONE
nextevt = T0
/ \
0 (T0) 1 (T1)
idle idle
0) The hierarchy has 3 levels. The left part (GRP1:0) is all idle,
including CPU 0 and CPU 1 which have a timer each: T0 and T1. They have
the same expiry value.
[GRP2:0]
migrator = GRP1:1
active = GRP1:1
nextevt = KTIME_MAX
/ \
[GRP1:0] [GRP1:1]
migrator = NONE [...]
active = NONE
nextevt = TGRP0:0 (T0)
/ \
[GRP0:0] [...]
migrator = NONE
active = NONE
nextevt = T0
/ \
0 (T0) 1 (T1)
idle idle
1) The migrator in GRP1:1 handles remotely T0. The event is dequeued
from the top and T0 executed.
[GRP2:0]
migrator = GRP1:1
active = GRP1:1
nextevt = KTIME_MAX
/ \
[GRP1:0] [GRP1:1]
migrator = NONE [...]
active = NONE
nextevt = TGRP0:0 (T0)
/ \
[GRP0:0] [...]
migrator = NONE
active = NONE
nextevt = T1
/ \
0 1 (T1)
idle idle
2) The migrator in GRP1:1 fetches the next timer for CPU 0 and finds
none. But it updates the events from its groups, starting with GRP0:0
which now has T1 as its next event. So far so good.
[GRP2:0]
migrator = GRP1:1
active = GRP1:1
nextevt = KTIME_MAX
/ \
[GRP1:0] [GRP1:1]
migrator = NONE [...]
active = NONE
nextevt = TGRP0:0 (T0)
/ \
[GRP0:0] [...]
migrator = NONE
active = NONE
nextevt = T1
/ \
0 1 (T1)
idle idle
3) The migrator in GRP1:1 proceeds upward and updates the events in
GRP1:0. The child event TGRP0:0 is found queued with the same expiry
as before. And therefore it is left unchanged. However the target CPU
is not the same but that fact is ignored so TGRP0:0 still points to
CPU 0 when it should point to CPU 1.
[GRP2:0]
migrator = GRP1:1
active = GRP1:1
nextevt = TGRP1:0 (T0)
/ \
[GRP1:0] [GRP1:1]
migrator = NONE [...]
active = NONE
nextevt = TGRP0:0 (T0)
/ \
[GRP0:0] [...]
migrator = NONE
active = NONE
nextevt = T1
/ \
0 1 (T1)
idle idle
4) The propagation has reached the top level and TGRP1:0, having TGRP0:0
as its first event, also wrongly points to CPU 0. TGRP1:0 is added to
the top level group.
[GRP2:0]
migrator = GRP1:1
active = GRP1:1
nextevt = KTIME_MAX
/ \
[GRP1:0] [GRP1:1]
migrator = NONE [...]
active = NONE
nextevt = TGRP0:0 (T0)
/ \
[GRP0:0] [...]
migrator = NONE
active = NONE
nextevt = T1
/ \
0 1 (T1)
idle idle
5) The migrator in GRP1:1 dequeues the next event in top level pointing
to CPU 0. But since it actually doesn't see any real event in CPU 0, it
early returns.
6) T1 is left unhandled until either CPU 0 or CPU 1 wake up.
Some other bad scenario may involve trees with just two levels.
Fix this with unconditionally updating the CPU of the child event before
considering to early return while updating a queued event with an
unchanged expiry value.
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Link: https://lore.kernel.org/r/Zg2Ct6M2RJAYHgCB@localhost.localdomain
There is a while-loop in ast_dp_set_on_off() that could lead to
infinite-loop. This is because the register, VGACRI-Dx, checked in
this API is a scratch register actually controlled by a MCU, named
DPMCU, in BMC.
These scratch registers are protected by scu-lock. If suc-lock is not
off, DPMCU can not update these registers and then host will have soft
lockup due to never updated status.
DPMCU is used to control DP and relative registers to handshake with
host's VGA driver. Even the most time-consuming task, DP's link
training, is less than 100ms. 200ms should be enough.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Fixes: 594e9c04b5 ("drm/ast: Create the driver for ASPEED proprietory Display-Port")
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.19+
Link: https://patchwork.freedesktop.org/patch/msgid/20240403090246.1495487-1-jammy_huang@aspeedtech.com
1. Fixup infracfg clock controller binding
It also acts as reset controller so #reset-cells is required.
2. Use -pins suffix for pinctrl
This fixes:
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: syscon@10001000: '#reset-cells' is a required property
from schema $id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
arch/arm64/boot/dts/mediatek/mt2712-evb.dtb: pinctrl@1000b000: 'eth_default', 'eth_sleep', 'usb0_iddig', 'usb1_iddig' do not match any of the regexes: 'pinctrl-[0-9]+', 'pins$'
from schema $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240301074741.8362-1-zajec5@gmail.com
[Angelo: Added Fixes tags]
Fixes: 5d4839709c ("arm64: dts: mt2712: Add clock controller device nodes")
Fixes: 1724f4cc51 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: thermal-zones: cpu-thermal:cooling-maps: 'cpu-active-high', 'cpu-active-low', 'cpu-active-med' do not match any of the regexes: '^map[-a-zA-Z0-9]*$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
Fixes: c26f779a22 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts")
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213061459.17917-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Ethernet block doesn't include or act as a reset controller.
Documentation also doesn't document "#reset-cells" for it.
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: ethernet@15100000: Unevaluated properties are not allowed ('#reset-cells' was unexpected)
from schema $id: http://devicetree.org/schemas/net/mediatek,net.yaml#
Fixes: 082ff36bd5 ("arm64: dts: mediatek: mt7986: introduce ethernet nodes")
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek ethsys controller / syscon binding doesn't allow any subnodes
so "#address-cells" and "#size-cells" are redundant (actually:
disallowed).
This fixes:
arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtb: syscon@15000000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml#
Fixes: 1f9986b258 ("arm64: dts: mediatek: add clock support for mt7986a")
Cc: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240213053739.14387-1-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmYPJIUACgkQJNaLcl1U
h9Ap8Qf/Xr2YP+KJxiD7g52grelyqjUdMCBkoB5Ndf4BU/mBl5X1yZkBuiTEB24D
dcjamLuxNHGJhrHalYEfok6wRK3RMlkDZ8SNgpCP9rmOH0cSdt/8I3vUXA/XUKrx
SnceTSZC1S7BSRk26IKf2UdFRULMSGpC87mVLxi7DT+nmuIAigGau3yBPXveG00p
OLOYmJK9vwdlxAkfIp0ddYx3iTqfaq55W5ttWadoLG9gpoGbDzkvapBsZebqlGeo
MkZrur70Vi7ousGATkzQHCkEUD8atNOTRrrAgVmzgBbUy3Y6LOmeMwiH306wXJAq
XHiYYLCPlPI5myNYHeKmOQbCK1AzpA==
=/2l+
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.9-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
A relatively large set of fixes here, the biggest piece of it is a
series correcting some problems with the delay reporting for Intel SOF
cards but there's a bunch of other things. Everything here is driver
specific except for a fix in the core for an issue with sign extension
handling volume controls.
fsl_ep_queue() is only called by usb_ep_queue() (as ep->ops->queue()).
So _ep isn't NULL.
As ep->ops->queue = fsl_ep_queue, the ep was initialized by
struct_ep_setup() and so ep->udc isn't NULL either.
Drop the check for _ep being NULL and assign udc earlier to prevent
following an uninitialized pointer in the two dev_vdbg()s in lines 878
and 882. This fixes a compiler warning when using clang and
CONFIG_USB_GADGET_VERBOSE=y.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404050227.TTvcCPBu-lkp@intel.com/
Fixes: 6025f20f16 ("usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240405055812.694123-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize HDCP capability variables to false to avoid UBSAN
warning in boolean value as some functions invoking this could
return without filling the two capability values.
--v2
-Fix Typo [Chaitanya]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401030106.274787-2-suraj.kandpal@intel.com
Two misc-next in one.
drm-misc-next for v6.10-rc1:
The deal of a lifetime! You get ALL of the previous
drm-misc-next-2024-03-21-1 tag!!
But WAIT, there's MORE!
Cross-subsystem Changes:
- Assorted DT binding updates.
Core Changes:
- Clarify how optional wait_hpd_asserted is.
- Shuffle Kconfig names around.
Driver Changes:
- Assorted build fixes for panthor, imagination,
- Add AUO B120XAN01.0 panels.
- Assorted small fixes to panthor, panfrost.
drm-misc-next for v6.10:
UAPI Changes:
- Move some nouveau magic constants to uapi.
Cross-subsystem Changes:
- Move drm-misc to gitlab and freedesktop hosting.
- Add entries for panfrost.
Core Changes:
- Improve placement for TTM bo's in idle/busy handling.
- Improve drm/bridge init ordering.
- Add CONFIG_DRM_WERROR, and use W=1 for drm.
- Assorted documentation updates.
- Make more (drm and driver) headers self-contained and add header
guards.
- Grab reservation lock in pin/unpin callbacks.
- Fix reservation lock handling for vmap.
- Add edp and edid panel matching, use it to fix a nearly identical
panel.
Driver Changes:
- Add drm/panthor driver and assorted fixes.
- Assorted small fixes to xlnx, panel-edp, tidss, ci, nouveau,
panel and bridge drivers.
- Add Samsung s6e3fa7, BOE NT116WHM-N44, CMN N116BCA-EA1,
CrystalClear CMT430B19N00, Startek KD050HDFIA020-C020A,
powertip PH128800T006-ZHC01 panels.
- Fix console for omapdrm.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bea310a6-6ff6-477e-9363-f9f053cfd12a@linux.intel.com
as this can cause starvation when reaching more
than max_active defined by workqueue
- Fix saving unordered rebinding fences by attaching
them as kernel feces to the vm's resv
- Fix TLB invalidation fences completing out of order
- Move rebind TLB invalidation to the ring ops to reduce
the latency
-----BEGIN PGP SIGNATURE-----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=WIRn
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-04-04' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Stop using system_unbound_wq for preempt fences,
as this can cause starvation when reaching more
than max_active defined by workqueue
- Fix saving unordered rebinding fences by attaching
them as kernel feces to the vm's resv
- Fix TLB invalidation fences completing out of order
- Move rebind TLB invalidation to the ring ops to reduce
the latency
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/tizan6wdpxu4ayudeikjglxdgzmnhdzj3li3z2pgkierjtozzw@lbfddeg43a7h
Add CPUID_LNX_5 to track cpufeatures' word 21, and add the appropriate
compile-time assert in KVM to prevent direct lookups on the features in
CPUID_LNX_5. KVM uses X86_FEATURE_* flags to manage guest CPUID, and so
must translate features that are scattered by Linux from the Linux-defined
bit to the hardware-defined bit, i.e. should never try to directly access
scattered features in guest CPUID.
Opportunistically add NR_CPUID_WORDS to enum cpuid_leafs, along with a
compile-time assert in KVM's CPUID infrastructure to ensure that future
additions update cpuid_leafs along with NCAPINTS.
No functional change intended.
Fixes: 7f274e609f ("x86/cpufeatures: Add new word for scattered features")
Cc: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 27f58c04a8 ("scsi: sg: Avoid sg device teardown race") introduced
an incorrect WARN_ON_ONCE() and missed a sequence where sg_device_destroy()
was used after scsi_device_put().
sg_device_destroy() is accessing the parent scsi_device request_queue which
will already be set to NULL when the preceding call to scsi_device_put()
removed the last reference to the parent scsi_device.
Drop the incorrect WARN_ON_ONCE() - allowing more than one concurrent
access to the sg device - and make sure sg_device_destroy() is not used
after scsi_device_put() in the error handling.
Link: https://lore.kernel.org/all/5375B275-D137-4D5F-BE25-6AF8ACAE41EF@linux.ibm.com
Fixes: 27f58c04a8 ("scsi: sg: Avoid sg device teardown race")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20240401191038.18359-1-Alexander@wetzel-home.de
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of
the newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT"
with better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting
to some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing problems,
incorrect checksum conversions, and incorrect packet transformations
which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6bQI
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
A couple more small fixes, and new repair code.
We can now automatically recover from arbitrary corrupted interior btree
nodes by scanning, and we can reconstruct metadata as needed to bring a
filesystem back into a working, consistent, read-write state and
preserve access to whatevver wasn't corrupted.
Meaning - you can blow away all metadata except for extents and dirents
leaf nodes, and repair will reconstruct everything else and give you
your data, and under the correct paths. If inodes are missing i_size
will be slightly off and permissions/ownership/timestamps will be gone,
and we do still need the snapshots btree if snapshots were in use - in
the future we'll be able to guess the snapshot tree structure in some
situations.
IOW - aside from shaking out remaining bugs (fuzz testing is still
coming), repair code should be complete and if repair ever doesn't work
that's the highest priority bug that I want to know about immediately.
This patchset was kindly tested by a user from India who accidentally
wiped one drive out of a three drive filesystem with no replication on
the family computer - it took a couple weeks but we got everything
important back.
-----BEGIN PGP SIGNATURE-----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=7/rR
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs repair code from Kent Overstreet:
"A couple more small fixes, and new repair code.
We can now automatically recover from arbitrary corrupted interior
btree nodes by scanning, and we can reconstruct metadata as needed to
bring a filesystem back into a working, consistent, read-write state
and preserve access to whatevver wasn't corrupted.
Meaning - you can blow away all metadata except for extents and
dirents leaf nodes, and repair will reconstruct everything else and
give you your data, and under the correct paths. If inodes are missing
i_size will be slightly off and permissions/ownership/timestamps will
be gone, and we do still need the snapshots btree if snapshots were in
use - in the future we'll be able to guess the snapshot tree structure
in some situations.
IOW - aside from shaking out remaining bugs (fuzz testing is still
coming), repair code should be complete and if repair ever doesn't
work that's the highest priority bug that I want to know about
immediately.
This patchset was kindly tested by a user from India who accidentally
wiped one drive out of a three drive filesystem with no replication on
the family computer - it took a couple weeks but we got everything
important back"
* tag 'bcachefs-2024-04-03' of https://evilpiepirate.org/git/bcachefs:
bcachefs: reconstruct_inode()
bcachefs: Subvolume reconstruction
bcachefs: Check for extents that point to same space
bcachefs: Reconstruct missing snapshot nodes
bcachefs: Flag btrees with missing data
bcachefs: Topology repair now uses nodes found by scanning to fill holes
bcachefs: Repair pass for scanning for btree nodes
bcachefs: Don't skip fake btree roots in fsck
bcachefs: bch2_btree_root_alloc() -> bch2_btree_root_alloc_fake()
bcachefs: Etyzinger cleanups
bcachefs: bch2_shoot_down_journal_keys()
bcachefs: Clear recovery_passes_required as they complete without errors
bcachefs: ratelimit informational fsck errors
bcachefs: Check for bad needs_discard before doing discard
bcachefs: Improve bch2_btree_update_to_text()
mean_and_variance: Drop always failing tests
bcachefs: fix nocow lock deadlock
bcachefs: BCH_WATERMARK_interior_updates
bcachefs: Fix btree node reserve
sysfs is limited to PAGE_SIZE, and when we're debugging strange
deadlocks/priority inversions we need to see the full list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Snapshot table accesses generally need to be checking for invalid
snapshot ID now, fix one that was missed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers.
Fixes: 7db91e57a0 ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan O'Rear <sorear@fastmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327061258.2370291-1-sorear@fastmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
patch_map() uses fixmap mappings to circumvent the non-writability of
the kernel text mapping.
The __set_fixmap() function only flushes the current cpu tlb, it does
not emit an IPI so we must make sure that while we use a fixmap mapping,
the current task is not migrated on another cpu which could miss the
newly introduced fixmap mapping.
So in order to avoid any task migration, disable the preemption.
Reported-by: Andrea Parri <andrea@rivosinc.com>
Closes: https://lore.kernel.org/all/ZcS+GAaM25LXsBOl@andrea/
Reported-by: Andy Chiu <andy.chiu@sifive.com>
Closes: https://lore.kernel.org/linux-riscv/CABgGipUMz3Sffu-CkmeUB1dKVwVQ73+7=sgC45-m0AE9RCjOZg@mail.gmail.com/
Fixes: cad539baa4 ("riscv: implement a memset like function for text")
Fixes: 0ff7c3b331 ("riscv: Use text_mutex instead of patch_lock")
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240326203017.310422-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Print the instruction dump with info instead of emergency level. The
unhandled signal message is only for informational purpose.
Fixes: b8a03a6341 ("riscv: add userland instruction dump to RISC-V splats")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/mvmy1aegrhm.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While we don't have the full flow protection when devcoredump
is accessed after device unbind. Let's at least for now
protect against null dereference:
[ 422.766508] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 423.119584] RIP: 0010:xe_vm_snapshot_free+0x30/0x180 [xe]
While at it, I also fixed a non-standard code-declaration block
on the similar function of xe_guc_submit.
v2: - Use IS_ERR_OR_NULL (Nirmoy)
- Expand to other functions
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240403195044.239766-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZg7vEAAKCRDbK58LschI
gxAeAQD18uHqGbcCCnOVnaETdi3bQcSBpobuclThpN1WdMILcwEA+5Vz9Lxmt6BH
qF/vbVHAOeCZt3LTOJ/jx1GRVstVWQk=
=+QKv
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-04
We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).
The main changes are:
1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
incorrect destination IP calculation and incorrect IP for relocations,
from Uros Bizjak and Joan Bruguera Micó.
2) Fix BPF arena file descriptor leaks in the verifier,
from Anton Protopopov.
3) Defer bpf_link deallocation to after RCU grace period as currently
running multi-{kprobes,uprobes} programs might still access cookie
information from the link, from Andrii Nakryiko.
4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
by syzkaller, from Jakub Sitnicki.
5) Fix resolve_btfids build with musl libc due to missing linux/types.h
include, from Natanael Copa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Prevent lock inversion deadlock in map delete elem
x86/bpf: Fix IP for relocating call depth accounting
x86/bpf: Fix IP after emitting call depth accounting
bpf: fix possible file descriptor leaks in verifier
tools/resolve_btfids: fix build with musl libc
bpf: support deferring bpf_link dealloc to after RCU grace period
bpf: put uprobe link's path and task in release callback
====================
Link: https://lore.kernel.org/r/20240404183258.4401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
has added back map_util_perf() in em_cpu_energy() computation which has
been removed with the rework of scheduler/cpufreq interface.
This is wrong because sugov_effective_cpu_perf() already takes care of
mapping the utilization to a performance level.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When adding sanitization of the label, the path through
edge_detector_setup() that leads to debounce_setup() was overlooked.
A request taking this path does not allocate a new label and the
request label is freed twice when the request is released, resulting
in memory corruption.
Add label sanitization to debounce_setup().
Cc: stable@vger.kernel.org
Fixes: b34490879b ("gpio: cdev: sanitize the label before requesting the interrupt")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
[Bartosz: rebased on top of the fix for empty GPIO labels]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch addresses an issue in the selftests/harness where an
assertion within FIXTURE_TEARDOWN could trigger an infinite loop.
The problem arises because the teardown procedure is meant to
execute once, but the presence of failing assertions (ASSERT_EQ(0, 1))
leads to repeated attempts to execute teardown due to
the long jump mechanism used by the harness for handling assertions.
To resolve this, the patch ensures that the teardown process
runs only once, regardless of assertion outcomes, preventing
the infinite loop and allowing tests to fail.
A simple test demo(test.c):
#include "kselftest_harness.h"
FIXTURE(f)
{
int fd;
};
FIXTURE_SETUP(f)
{
self->fd = 0;
}
FIXTURE_TEARDOWN(f)
{
TH_LOG("TEARDOWN");
ASSERT_EQ(0, 1);
self->fd = -1;
}
TEST_F(f, open_close)
{
ASSERT_NE(self->fd, 1);
}
TEST_HARNESS_MAIN
will always output the following output due to a dead loop until timeout:
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
...
But here's what we should and expect to get:
TAP version 13
1..1
# Starting 1 tests from 2 test cases.
# RUN f.open_close ...
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# open_close: Test terminated by assertion
# FAIL f.open_close
not ok 1 f.open_close
# FAILED: 0 / 1 tests passed.
# Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0
also this is related to the issue mentioned in this patch
https://patchwork.kernel.org/project/linux-kselftest/patch/e2ba3f8c-80e6-477d-9cea-1c9af820e0ed@alu.unizg.hr/
Signed-off-by: Shengyu Li <shengyu.li.evgeny@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=PKX1
-----END PGP SIGNATURE-----
Merge tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 unlike early commit path stage which triggers a call to abort,
an explicit release of the batch is required on abort, otherwise
mutex is released and commit_list remains in place.
Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise
async GC worker could collect expired objects.
Patch #3 flush pending destroy work in module removal path, otherwise UaF
is possible.
Patch #4 and #6 restrict the table dormant flag with basechain updates
to fix state inconsistency in the hook registration.
Patch #5 adds missing RCU read side lock to flowtable type to avoid races
with module removal.
* tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
====================
Link: https://lore.kernel.org/r/20240404104334.1627-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-03 (ice, idpf)
This series contains updates to ice and idpf drivers.
Dan Carpenter initializes some pointer declarations to NULL as needed for
resource cleanup on ice driver.
Petr Oros corrects assignment of VLAN operators to fix Rx VLAN filtering
in legacy mode for ice.
Joshua calls eth_type_trans() on unknown packets to prevent possible
kernel panic on idpf.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix kernel panic on unknown packet types
ice: fix enabling RX VLAN filtering
ice: Fix freeing uninitialized pointers
====================
Link: https://lore.kernel.org/r/20240403201929.1945116-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
