Addresses get set by .set_vq_address. hw vq addresses will be updated on
next modify_virtqueue.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement vdpa vq and device resume if capability detected. Add support
for suspend -> ready state change.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a bitmask variable that tracks hw vq field changes that
are supposed to be modified on next hw vq change command.
This will be useful to set multiple vq fields when resuming the vq.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Necessary for checking if resumable vqs are supported by the hardware.
Actual support will be added in a downstream patch.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20231225151203.152687-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio standard doesn't allow for virtqueue address and state
changes when the device is in DRIVER_OK. Return an error in such cases
unless the device is suspended.
The suspended device exception is needed because some devices support
virtqueue changes when the device is suspended.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231225134210.151540-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set vdpa device suspended state on successful suspend. Clear it on
successful resume and reset.
The state will be locked by the vhost_vdpa mutex. The mutex is taken
during suspend, resume and reset in vhost_vdpa_unlocked_ioctl. The
exception is vhost_vdpa_open which does a device reset but that should
be safe because it can only happen before the other ops.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231225134210.151540-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds polling support to virtio-scsi. It's based on and works similar
to virtblk support where we add a module param to specify the number of
poll queues then subtract to calculate the IO queues.
When using 8 poll queues and a vhost worker per queue we see 4K IOPs
with fio:
fio --filename=/dev/sda --direct=1 --rw=randread --bs=4k \
--ioengine=io_uring --hipri --iodepth=128 --numjobs=$NUM_JOBS
increase like:
jobs base poll
1 207K 296K
2 392K 552K
3 581K 860K
4 765K 1235K
5 936K 1598K
6 1104K 1880K
7 1253K 2095K
8 1311k 2187K
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20231214052649.57743-1-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds the support for feature VIRTIO_PMEM_F_SHMEM_REGION
(virtio spec v1.2 section 5.19.5.2 [1]).
During feature negotiation, if VIRTIO_PMEM_F_SHMEM_REGION is offered
by the device, the driver looks for a shared memory region of id 0.
If it is found, this feature is understood. Otherwise, this feature
bit is cleared.
During probe, if VIRTIO_PMEM_F_SHMEM_REGION has been negotiated,
virtio pmem ignores the `start` and `size` fields in device config
and uses the physical address range of shared memory region 0.
[1] https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-6480002
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Message-Id: <20231220204906.566922-1-changyuanl@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
A virtio_balloon's parent device may be configured so that a
configuration change interrupt is a wakeup event. Extend the processing
of such a wakeup event until the balloon finishes inflating or deflating
by calling pm_stay_awake/pm_relax in the virtio_balloon driver. Note
that these calls are no-ops if the parent device doesn't support wakeup
events or if the wakeup events are not enabled.
This change allows the guest to use system power states such as s2idle
without running the risk the virtio_balloon's cooperative memory
management becoming unresponsive to the host's requests.
Tested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: David Stevens <stevensd@chromium.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-Id: <20240110021925.1137333-1-stevensd@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
T-HEAD CPUs such as C906/C910/C920 support phy address based CMO, use
them so that we don't need to convert to virt address.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20231114143338.2406-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Previously, we use alternative mechanism to dynamically patch
the CMO operations for THEAD C906/C910 during boot for performance
reason. But as pointed out by Arnd, "there is already a significant
cost in accessing the invalidated cache lines afterwards, which is
likely going to be much higher than the cost of an indirect branch".
And indeed, there's no performance difference with GMAC and EMMC per
my test on Sipeed Lichee Pi 4A board.
Use riscv_nonstd_cache_ops for THEAD C906/C910 CMO to simplify
the alternative code, and to acchieve Arnd's goal -- "I think
moving the THEAD ops at the same level as all nonstandard operations
makes sense, but I'd still leave CMO as an explicit fast path that
avoids the indirect branch. This seems like the right thing to do both
for readability and for platforms on which the indirect branch has a
noticeable overhead."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231114143338.2406-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Add support for non-blocking lookup (MAY_NOT_BLOCK / LOOKUP_RCU)
- Various minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=vN0N
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Add support for non-blocking lookup (MAY_NOT_BLOCK / LOOKUP_RCU)
- Various minor fixes and cleanups
* tag 'gfs2-v6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix freeze consistency check in log_write_header
gfs2: Refcounting fix in gfs2_thaw_super
gfs2: Minor gfs2_{freeze,thaw}_super cleanup
gfs2: Use wait_event_freezable_timeout() for freezable kthread
gfs2: Add missing set_freezable() for freezable kthread
gfs2: Remove use of error flag in journal reads
gfs2: Lift withdraw check out of gfs2_ail1_empty
gfs2: Rename gfs2_withdrawn to gfs2_withdrawing_or_withdrawn
gfs2: Mark withdraws as unlikely
gfs2: Minor gfs2_ail1_empty cleanup
gfs2: use is_subdir()
gfs2: d_obtain_alias(ERR_PTR(...)) will do the right thing
gfs2: Use GL_NOBLOCK flag for non-blocking lookups
gfs2: Add GL_NOBLOCK flag
gfs2: rgrp: fix kernel-doc warnings
gfs2: fix kernel BUG in gfs2_quota_cleanup
gfs2: Fix inode_go_instantiate description
gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump
-----BEGIN PGP SIGNATURE-----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=4sw3
-----END PGP SIGNATURE-----
Merge tag 'for-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There are no exciting changes for users, it's been mostly API
conversions and some fixes or refactoring.
The mount API conversion is a base for future improvements that would
come with VFS. Metadata processing has been converted to folios, not
yet enabling the large folios but it's one patch away once everything
gets tested enough.
Core changes:
- convert extent buffers to folios:
- direct API conversion where possible
- performance can drop by a few percent on metadata heavy
workloads, the folio sizes are not constant and the calculations
add up in the item helpers
- both regular and subpage modes
- data cannot be converted yet, we need to port that to iomap and
there are some other generic changes required
- convert mount to the new API, should not be user visible:
- options deprecated long time ago have been removed: inode_cache,
recovery
- the new logic that splits mount to two phases slightly changes
timing of device scanning for multi-device filesystems
- LSM options will now work (like for selinux)
- convert delayed nodes radix tree to xarray, preserving the
preload-like logic that still allows to allocate with GFP_NOFS
- more validation of sysfs value of scrub_speed_max
- refactor chunk map structure, reduce size and improve performance
- extent map refactoring, smaller data structures, improved
performance
- reduce size of struct extent_io_tree, embedded in several
structures
- temporary pages used for compression are cached and attached to a
shrinker, this may slightly improve performance
- in zoned mode, remove redirty extent buffer tracking, zeros are
written in case an out-of-order is detected and proper data are
written to the actual write pointer
- cleanups, refactoring, error message improvements, updated tests
- verify and update branch name or tag
- remove unwanted text"
* tag 'for-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (89 commits)
btrfs: pass btrfs_io_geometry into btrfs_max_io_len
btrfs: pass struct btrfs_io_geometry to set_io_stripe
btrfs: open code set_io_stripe for RAID56
btrfs: change block mapping to switch/case in btrfs_map_block
btrfs: factor out block mapping for single profiles
btrfs: factor out block mapping for RAID5/6
btrfs: reduce scope of data_stripes in btrfs_map_block
btrfs: factor out block mapping for RAID10
btrfs: factor out block mapping for DUP profiles
btrfs: factor out RAID1 block mapping
btrfs: factor out block-mapping for RAID0
btrfs: re-introduce struct btrfs_io_geometry
btrfs: factor out helper for single device IO check
btrfs: migrate btrfs_repair_io_failure() to folio interfaces
btrfs: migrate eb_bitmap_offset() to folio interfaces
btrfs: migrate various end io functions to folios
btrfs: migrate subpage code to folio interfaces
btrfs: migrate get_eb_page_index() and get_eb_offset_in_page() to folios
btrfs: don't double put our subpage reference in alloc_extent_buffer
btrfs: cleanup metadata page pointer usage
...
Building drivers/gpu/drm/xe/xe_gt_pagefault.c with GCC 11 results
in the following build errors:
./include/linux/fortify-string.h:57:33: error: writing 16 bytes into a region of size 0 [-Werror=stringop-overflow=]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
./include/linux/fortify-string.h:644:9: note: in expansion of macro ‘__underlying_memcpy’
644 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
./include/linux/fortify-string.h:689:26: note: in expansion of macro ‘__fortify_memcpy_chk’
689 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_gt_pagefault.c:340:17: note: in expansion of macro ‘memcpy’
340 | memcpy(pf_queue->data + pf_queue->tail, msg, len * sizeof(u32));
| ^~~~~~
In file included from drivers/gpu/drm/xe/xe_device_types.h:17,
from drivers/gpu/drm/xe/xe_vm_types.h:16,
from drivers/gpu/drm/xe/xe_bo.h:13,
from drivers/gpu/drm/xe/xe_gt_pagefault.c:16:
drivers/gpu/drm/xe/xe_gt_types.h:102:25: note: at offset [1144, 265324] into destination object ‘tile’ of size 8
102 | struct xe_tile *tile;
| ^~~~
Fix these by removing -Wstringop-overflow from drm/xe builds.
Closes: https://lore.kernel.org/all/45ad1d0f-a10f-483e-848a-76a30252edbe@paulmck-laptop/
Fixes: 7a8bc11782 ("drm/xe: Enable W=1 warnings by default")
Suggested-by: Stephen Rothwell <sfr@rothwell.id.au>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ This particular warning is broken on GCC11. In future changes it will
be moved to the normal C flags in the top level Makefile (out of
Makefile.extrawarn), but accounting for the compiler support. Just
remove it out of xe's forced extra warnings for now ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
* New features/functionality
* Online repair
* Reserve disk space for online repairs.
* Fix misinteraction between the AIL and btree bulkloader because of
which the bulk load fails to queue a buffer for writeback if it
happens to be on the AIL list.
* Prevent transaction reservation overflows when reaping blocks during
online repair.
* Whenever possible, bulkloader now copies multiple records into a
block.
* Support repairing of
1. Per-AG free space, inode and refcount btrees.
2. Ondisk inodes.
3. File data and attribute fork mappings.
* Verify the contents of
1. Inode and data fork of realtime bitmap file.
2. Quota files.
* Introduce MF_MEM_PRE_REMOVE. This will be used to notify tasks about
a pmem device being removed.
* Bug fixes
* Fix memory leak of recovered attri intent items.
* Fix UAF during log intent recovery.
* Fix realtime geometry integer overflows.
* Prevent scrub from live locking in xchk_iget.
* Prevent fs shutdown when removing files during low free disk space.
* Prevent transaction reservation overflow when extending an RT device.
* Prevent incorrect warning from being printed when extending a
filesystem.
* Fix an off-by-one error in xreap_agextent_binval.
* Serialize access to perag radix tree during deletion operation.
* Fix perag memory leak during growfs.
* Allow allocation of minlen realtime extent when the maximum sized
realtime free extent is minlen in size.
* Cleanups
* Remove duplicate boilerplate code spread across functionality associated
with different log items.
* Cleanup resblks interfaces.
* Pass defer ops pointer to defer helpers instead of an enum.
* Initialize di_crc in xfs_log_dinode to prevent KMSAN warnings.
* Use static_assert() instead of BUILD_BUG_ON_MSG() to validate size of
structures and structure member offsets. This is done in order to be
able to share the code with userspace.
* Move XFS documentation under a new directory specific to XFS.
* Do not invoke deferred ops' ->create_done callback if the deferred
operation does not have an intent item associated with it.
* Remove duplicate inclusion of header files from scrub/health.c.
* Refactor Realtime code.
* Cleanup attr code.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZZJQbwAKCRAH7y4RirJu
9JjkAP9Zg0QZNmAMsZwvgEBbuF/OnHKl4GmPA5uq0jPmSWCOqAEA0HjlOmuNfQWn
93fIw6CPbt+9QCluTYBwUisKLIJ/wgA=
=qmO0
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
"New features/functionality:
- Online repair:
- Reserve disk space for online repairs
- Fix misinteraction between the AIL and btree bulkloader because
of which the bulk load fails to queue a buffer for writeback if
it happens to be on the AIL list
- Prevent transaction reservation overflows when reaping blocks
during online repair
- Whenever possible, bulkloader now copies multiple records into
a block
- Support repairing of
1. Per-AG free space, inode and refcount btrees
2. Ondisk inodes
3. File data and attribute fork mappings
- Verify the contents of
1. Inode and data fork of realtime bitmap file
2. Quota files
- Introduce MF_MEM_PRE_REMOVE. This will be used to notify tasks
about a pmem device being removed
Bug fixes:
- Fix memory leak of recovered attri intent items
- Fix UAF during log intent recovery
- Fix realtime geometry integer overflows
- Prevent scrub from live locking in xchk_iget
- Prevent fs shutdown when removing files during low free disk space
- Prevent transaction reservation overflow when extending an RT
device
- Prevent incorrect warning from being printed when extending a
filesystem
- Fix an off-by-one error in xreap_agextent_binval
- Serialize access to perag radix tree during deletion operation
- Fix perag memory leak during growfs
- Allow allocation of minlen realtime extent when the maximum sized
realtime free extent is minlen in size
Cleanups:
- Remove duplicate boilerplate code spread across functionality
associated with different log items
- Cleanup resblks interfaces
- Pass defer ops pointer to defer helpers instead of an enum
- Initialize di_crc in xfs_log_dinode to prevent KMSAN warnings
- Use static_assert() instead of BUILD_BUG_ON_MSG() to validate size
of structures and structure member offsets. This is done in order
to be able to share the code with userspace
- Move XFS documentation under a new directory specific to XFS
- Do not invoke deferred ops' ->create_done callback if the deferred
operation does not have an intent item associated with it
- Remove duplicate inclusion of header files from scrub/health.c
- Refactor Realtime code
- Cleanup attr code"
* tag 'xfs-6.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (123 commits)
xfs: use the op name in trace_xlog_intent_recovery_failed
xfs: fix a use after free in xfs_defer_finish_recovery
xfs: turn the XFS_DA_OP_REPLACE checks in xfs_attr_shortform_addname into asserts
xfs: remove xfs_attr_sf_hdr_t
xfs: remove struct xfs_attr_shortform
xfs: use xfs_attr_sf_findname in xfs_attr_shortform_getvalue
xfs: remove xfs_attr_shortform_lookup
xfs: simplify xfs_attr_sf_findname
xfs: move the xfs_attr_sf_lookup tracepoint
xfs: return if_data from xfs_idata_realloc
xfs: make if_data a void pointer
xfs: fold xfs_rtallocate_extent into xfs_bmap_rtalloc
xfs: simplify and optimize the RT allocation fallback cascade
xfs: reorder the minlen and prod calculations in xfs_bmap_rtalloc
xfs: remove XFS_RTMIN/XFS_RTMAX
xfs: remove rt-wrappers from xfs_format.h
xfs: factor out a xfs_rtalloc_sumlevel helper
xfs: tidy up xfs_rtallocate_extent_exact
xfs: merge the calls to xfs_rtallocate_range in xfs_rtallocate_block
xfs: reflow the tail end of xfs_rtallocate_extent_block
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmWb/aIACgkQnJ2qBz9k
QNkV4AgAvsnFBOX3/jkZTA/2a+8AOJXx0uMdgupfMBzNkKXhhfWictaqWsiw7IzZ
pypnHV1GL9dbFt7z+mEfApvXby5ZBY245Tn5Qx2rPUYZVAFDtLR4ELT4+9RBrrdJ
DWxI8DgKetHeQLeP8neXVdU7ec/gP3J28lsYzqFAkJXA/ik13pWh16sLSZfYk7WX
gmdSW+Ize0YIfPJdQYMy0sJLnzB4iOvv4CbwbZqAm7ZesXHuisSolfrnvLLPU5ju
s7hf/dt46zakT6n2uYckhcv8Q7NnBpPnmgWRJI/utNtCAjLyZJJXbycUKFIGdBpm
jn/oeDwiYb/tXIB39ISt4QNZodfv5Q==
=rbo3
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fanotify changes allowing use of fanotify directory events even for
filesystems such as FUSE which don't report proper fsid"
* tag 'fsnotify_for_v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: allow "weak" fsid when watching a single filesystem
fanotify: store fsid in mark instead of in connector
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmWb/RsACgkQnJ2qBz9k
QNkHtQf+IhhWZPZhs2eLx5/TtAxf1ya9jaD2lbPZa5Cq2GFeR5FSLxN70zjlwyrD
HYhWHRwfqEwIbptMwzf1rpbMqEs4U5PigdhjAKpJQjMVyWyKD49yt97KVbBmQDUg
1PUCqRq6RjFL1wQjW7sc5ZBslNU6RlSSEkejro8qLHoG1xQ+aDMNeZIBD11GpLha
hGjXZRr64NDn2rqI71ZvNF3IxQRRl4HOOLN7YutHSYHHX5O4YFnhe9jxRgq1PDKU
1+ukKNu7kJMK+hCzK2+aKJ9OzzWyECG8PLI2F2fw54AmZDNRHrTA5recXUhFrPXg
4cHeh9kwphDlhmMu0+XIkN/P3wJHWA==
=jnIR
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull small quota cleanup from Jan Kara.
* tag 'fs_for_v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: convert dquot_claim_space_nodirty() to return void
Partial completions of zone append request is not allowed but if a zone
append completion indicates a number of completed bytes different from
the original BIO size, only the BIO status is set to error. This leads
to bio_advance() not setting the BIO size to 0 and thus to not call
bio_endio() at the end of req_bio_endio().
Make sure a partially completed zone append is failed and completed
immediately by forcing the completed number of bytes (nbytes) to be
equal to the BIO size, thus ensuring that bio_endio() is called.
Fixes: 297db73184 ("block: fix req_bio_endio append error handling")
Cc: stable@kernel.vger.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240110092942.442334-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If CONFIG_TRACEPOINTS isn't enabled, we assign this variable but then
never use it. This can cause the compiler to complain about that:
block/blk-iocost.c:1264:6: warning: variable 'last_period' set but not used [-Wunused-but-set-variable]
1264 | u64 last_period, cur_period;
| ^
Rather than add ifdefs to guard this, just mark it __maybe_unused.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401102335.GiWdeIo9-lkp@intel.com/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let us enable SBI based earlycon support in defconfig for both RV32
and RV64 so that "earlycon=sbi" can be used again.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231124070905.1043092-6-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We extend the existing RISC-V SBI earlycon support to use the new
RISC-V SBI debug console extension.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231124070905.1043092-4-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Let us provide SBI debug console helper routines which can be
shared by serial/earlycon-riscv-sbi.c and hvc/hvc_riscv_sbi.c.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231124070905.1043092-3-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The functions sbi_console_putchar() and sbi_console_getchar() are
not defined when CONFIG_RISCV_SBI_V01 is disabled so let us add
stub of these functions to avoid "#ifdef" on user side.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231124070905.1043092-2-apatel@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
bcm4331 seems to not function correctly with QoS support. This may be due
to issues with currently available firmware or potentially a device
specific issue.
When queues that are not of the default "best effort" priority are
selected, traffic appears to not transmit out of the hardware while no
errors are returned. This behavior is present among all the other priority
queues: video, voice, and background. While this can be worked around by
setting a kernel parameter, the default behavior is problematic for most
users and may be difficult to debug. This patch offers a working out-of-box
experience for bcm4331 users.
Log of the issue (using ssh low-priority traffic as an example):
ssh -T -vvvv git@github.com
OpenSSH_9.6p1, OpenSSL 3.0.12 24 Oct 2023
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: checking match for 'host * exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'"' host github.com originally github.com
debug3: /etc/ssh/ssh_config line 5: matched 'host "github.com"'
debug1: Executing command: '/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1''
debug3: command returned status 0
debug3: /etc/ssh/ssh_config line 5: matched 'exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0r"'
debug2: match found
debug1: /etc/ssh/ssh_config line 9: Applying options for *
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/binary-eater/.ssh/known_hosts'
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/binary-eater/.ssh/known_hosts2'
debug2: resolving "github.com" port 22
debug3: resolve_host: lookup github.com:22
debug3: channel_clear_timeouts: clearing
debug3: ssh_connect_direct: entering
debug1: Connecting to github.com [192.30.255.113] port 22.
debug3: set_sock_tos: set socket 3 IP_TOS 0x48
Fixes: e6f5b934fb ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-5-sergeantsagara@protonmail.com
When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop queue 0 when QoS is
disabled to prevent trying to stop a non-existent queue and failing to stop
the actual queue instantiated.
Fixes: bad6919469 ("b43: avoid packet losses in the dma worker code.")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-4-sergeantsagara@protonmail.com
When QoS is disabled, the queue priority value will not map to the correct
ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS
is disabled to prevent trying to stop/wake a non-existent queue and failing
to stop/wake the actual queue instantiated.
Fixes: 5100d5ac81 ("b43: Add PIO support for PCMCIA devices")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-3-sergeantsagara@protonmail.com
rtl8xxxu_set_basic_rates() sets the wrong initial RTS rate. It sets the
next higher rate than the one it should set, e.g. 36M instead of 24M.
The while loop was supposed to find the index of the most significant
bit which is 1, but it was copied incorrectly from the vendor driver.
Use __fls() instead.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/761e6836-6cd6-4930-91b6-0446834655c5@gmail.com
Some devices, like the Comfast CF-826F, use LED1, which already works.
Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly.
Write the right values to the LED control registers to make LED0 work
as well.
This is unfortunately tested only with the Comfast CF-826F.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/7a2c3158-3a45-4466-b11e-fc09802b20e2@gmail.com
Everything is in place now for concurrent mode, we can tell the system
that we support it.
We will allow a maximum of 2 virtual interfaces, one of them can be in
AP mode.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-22-martin.kaistra@linutronix.de
When the driver is used for concurrent mode, both virtual interfaces can
be set to station or AP mode, though only one can be in AP mode at the
same time.
In order to keep the code simple, use only hw port 0 for AP mode. When
an interface is added in AP mode which would be assigned to port 1, use
a switch_port function to transparently swap the mapping between virtual
interface and hw port.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-21-martin.kaistra@linutronix.de
Add a custom function for allocating entries in the sec cam. This allows
us to store multiple keys with the same keyidx.
The maximum number of sec cam entries for 8188f is 16 according to the
vendor driver. Add the number to rtl8xxxu_fileops, so that other chips
which might support more entries, can set a different number there.
Set the bssid as mac address for group keys instead of just using the
ethernet broadcast address and use BIT(6) in the sec cam ctrl entry
for differentiating them from pairwise keys like in the vendor driver.
Add the TXDESC_EN_DESC_ID bit and the hw_key_idx to tx
broadcast/multicast packets in AP mode.
Finally, allow the usage of rtl8xxxu_set_key() for AP mode.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-20-martin.kaistra@linutronix.de
Now that all uses of priv->vif have been converted to priv->vifs[]
remove the old attribute.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-19-martin.kaistra@linutronix.de
Until now, the driver only assigned a dedicated macid for connections
made in AP mode, in STA mode the return value of rtl8xxxu_get_macid()
was simply 0.
To differentiate between port 0 and 1, when both are in STA mode,
allocate a second macid (with value 1) and set sta_info->macid according
to the used port_num in rtl8xxxu_sta_add().
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-18-martin.kaistra@linutronix.de
Call set_linktype and set_bssid now with correct port_num. Call
stop_tx_beacon only for port 0, as we don't support beacons on port 1.
Explicit changes to BEACON will only happen for AP type interfaces, so
we don't need an additional check there.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-16-martin.kaistra@linutronix.de
Add a custom struct to store in vif->drv_priv with a reference to
port_num and fill it when a new interface is added. Choose a free
port_num for the newly added interface.
As we only want to support AP mode/sending beacons on port 0, only change
the beacon settings if a new interface is actually assigned to port 0.
Call set_linktype() and set_mac() with the appropriate port_num.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-15-martin.kaistra@linutronix.de
Check first whether priv->vifs[0] exists and is of type STATION, then go
to priv->vifs[1]. Make sure to call refresh_rate_mask for both
interfaces.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-14-martin.kaistra@linutronix.de
As we only want to support AP mode/sending beacons on port 0, change
from priv->vif to priv->vifs[0] in the check for AP mode.
Additionally, if we are in AP mode, don't filter RX beacon and probe
response frames to still allow working STATION mode on the other
interface.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-13-martin.kaistra@linutronix.de
As we only want to support AP mode/sending beacons on port 0, it is
enough to replace priv->vif with priv->vifs[0].
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-12-martin.kaistra@linutronix.de
In concurrent mode supported by this driver, both interfaces will use
the same channel and same wireless mode.
It is therefore possible to get the wireless mode by checking the first
connected interface.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-11-martin.kaistra@linutronix.de
To prepare for concurrent mode, enhance rtl8xxxu_set_bssid() to write the
BSSID of the respective interface to REG_BSSID or REG_BSSID1.
Like done with rtl8xxxu_set_mac(), call rtl8xxxu_set_bssid() with
port_num = 0, until the callers also support multiple interfaces.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-10-martin.kaistra@linutronix.de
If both interfaces are in STATION mode and both are connected to an AP,
there might be conflicting CFO values for the two connections. Ignore
the CFO information in this case.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-9-martin.kaistra@linutronix.de
The driver will support two interfaces soon, which both can be in
station mode, so extend the check, whether cfo information should be
parsed, to cover both interfaces.
For better code readability put the lines with priv->vifs[port_num] in a
separate function.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-8-martin.kaistra@linutronix.de
There are multiple places in the code where the current connection
status of wifi is checked. The driver will support two interfaces soon
and either one of them (or both) could be connected.
Convert all uses of (vif && vif->cfg.assoc) to a new helper
function rtl8xxxu_is_assoc() which checks both interfaces.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-7-martin.kaistra@linutronix.de
To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the
mac address of the respective interface to REG_MACID or REG_MACID1.
Remove the call to rtl8xxxu_set_mac() from the init function as we set
it in rtl8xxxu_add_interface() later anyway.
Until rtl8xxxu_add_interface() can handle both interfaces, call
rtl8xxxu_set_mac() with port_num = 0.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-6-martin.kaistra@linutronix.de
The driver currently does not support AP or concurrent mode for 8188e,
so just use priv->vifs[0] instead of priv->vif for now.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-5-martin.kaistra@linutronix.de
To prepare for concurrent mode, enhance the set_linktype function to be
able to set the linktype in the MSR register for both hardware ports.
Until the users of set_linktype can handle multiple interfaces, use
port_num = 0.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-4-martin.kaistra@linutronix.de
To prepare for concurrent mode, add an array ("vifs") to rtl8xxxu_priv
to keep track of both interfaces.
Keep the old priv->vif as long there are still users of it and let
priv->vifs[0] point to the same location.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-3-martin.kaistra@linutronix.de
