Ilya Leoshkevich says:
====================
s390/bpf: Fix gotol with large offsets
Hi,
While looking at a pyperf180 failure on s390x (must be related to [1],
I'm not done with the investigation yet) I noticed that I have
unfortunately messed up the gotol implementation. Patch 1 is the fix,
patch 2 is a small test infrastructure tweak, and patch 3 adds a
test.
[1] https://github.com/llvm/llvm-project/issues/55669
Best regards,
Ilya
====================
Link: https://lore.kernel.org/r/20240102193531.3169422-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test gotol with offsets that don't fit into a short (i.e., larger than
32k or smaller than -32k).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Testing long jumps requires having >32k instructions. That many
instructions require the verifier log buffer of 2 megabytes.
The regular test_progs run doesn't need an increased buffer, since
gotol test with 40k instructions doesn't request a log,
but test_progs -v will set the verifier log level.
Hence to avoid breaking gotol test with -v increase the buffer size.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For the detection code to check whether SYSEMU_SINGLESTEP works
correctly we needed some error cases while stopping to be non-fatal.
However, at this point stop_ptraced_child must always succeed, and we
can therefore simplify it slightly to exit immediately on error.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
start_userspace is only called from exactly one location, and the passed
pointer for the userspace process stack cannot be NULL.
Remove the check, without changing the control flow.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
These features have existed since Linux 2.6.14 and can be considered
widely available at this point. Also drop the backward compatibility
code for PTRACE_SETOPTIONS.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
----
v2:
* Continue to define PTRACE_SYSEMU_SINGLESTEP as glibc only added it in
version 2.27.
Signed-off-by: Richard Weinberger <richard@nod.at>
WPAN world. Thanks to the recent improvements it was possible to
discover nearby devices, it is now also possible to associate with them
to form a sub-network using a specific PAN ID. The support includes
several functions, such as:
* Requesting an association to a coordinator, waiting for the response
* Sending a disassociation notification to a coordinator
* Receiving an association request when we are coordinator, answering
the request (for now all devices are accepted up to a limit, to be
refined)
* Sending a disassociation notification to a child
* Users may request the list of associated devices (the parent and the
children).
Here are a few example of userspace calls that can be made:
iwpan dev <dev> associate pan_id 2 coord $COORD
iwpan dev <dev> list_associations
iwpan dev <dev> disassociate ext_addr $COORD
There are as well two patches from Uwe turning remove callbacks into
void functions.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmWCqiYACgkQJWrqGEe9
VoQxEwf+KzU7esLoTgtIRG+wIQyMaBm8qZ/YNdWwgEiD+kwbybdy258etavumIMN
HSKxRypXqJwR+R4b9l6yhrLmwn83HNR0L1oq6sHooBD+Zr90Ac8NNgONcF30iRQS
jSiQ3A7H4kTqEaSsZe3olLotVnhTrLvL/TCXt83FPst551Fj0VSDyRnrbETEmq5F
s+WJcB8rGYWY6avv5CbWcUDOPPq7yiZlpgcA+qTIDFMUfD90p+xqUZQ2hZKlscMB
Ia/FPW3gUufWFGd16d1WBaHD38DoLobfo/6Ou/Sufp+ErW17ZOGl4wNnViXlOpwD
0BUEO6vhtAx+83VYAC522PABWHkxyw==
=THkg
-----END PGP SIGNATURE-----
Merge tag 'ieee802154-for-net-next-2023-12-20' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next
Miquel Raynal says:
====================
This pull request mainly brings support for dynamic associations in
the WPAN world. Thanks to the recent improvements it was possible to
discover nearby devices, it is now also possible to associate with them
to form a sub-network using a specific PAN ID. The support includes
several functions, such as:
* Requesting an association to a coordinator, waiting for the response
* Sending a disassociation notification to a coordinator
* Receiving an association request when we are coordinator, answering
the request (for now all devices are accepted up to a limit, to be
refined)
* Sending a disassociation notification to a child
* Users may request the list of associated devices (the parent and the
children).
Here are a few example of userspace calls that can be made:
# iwpan dev <dev> associate pan_id 2 coord $COORD
# iwpan dev <dev> list_associations
# iwpan dev <dev> disassociate ext_addr $COORD
There are as well two patches from Uwe turning remove callbacks into
void functions.
* tag 'ieee802154-for-net-next-2023-12-20' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next:
mac802154: Avoid new associations while disassociating
ieee802154: Avoid confusing changes after associating
mac802154: Only allow PAN controllers to process association requests
mac802154: Use the PAN coordinator parameter when stamping packets
mac80254: Provide real PAN coordinator info in beacons
ieee802154: Give the user the association list
mac802154: Handle disassociation notifications from peers
mac802154: Follow the number of associated devices
ieee802154: Add support for limiting the number of associated devices
mac802154: Handle association requests from peers
mac802154: Handle disassociations
ieee802154: Add support for user disassociation requests
mac802154: Handle associating
ieee802154: Add support for user association requests
ieee802154: Internal PAN management
ieee802154: Let PAN IDs be reset
ieee802154: hwsim: Convert to platform remove callback returning void
ieee802154: fakelb: Convert to platform remove callback returning void
====================
Link: https://lore.kernel.org/r/20231220095556.4d9cef91@xps-13
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the ei->entries array is fixed for the duration of the eventfs_inode,
it can be used to skip over already read entries in eventfs_iterate().
That is, if ctx->pos is greater than zero, there's no reason in doing the
loop across the ei->entries array for the entries less than ctx->pos.
Instead, start the lookup of the entries at the current ctx->pos.
Link: https://lore.kernel.org/all/CAHk-=wiKwDUDv3+jCsv-uacDcHDVTYsXtBR9=6sGM5mqX+DhOg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.494956957@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In order to apply a shortcut to skip over the current ctx->pos
immediately, by using the ei->entries array, the reading of that array
should be first. Moving the array reading before the linked list reading
will make the shortcut change diff nicer to read.
Link: https://lore.kernel.org/all/CAHk-=wiKwDUDv3+jCsv-uacDcHDVTYsXtBR9=6sGM5mqX+DhOg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.333115095@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ctx->pos was only updated when it added an entry, but the "skip to
current pos" check (c--) happened for every loop regardless of if the
entry was added or not. This inconsistency caused readdir to be incorrect.
It was due to:
for (i = 0; i < ei->nr_entries; i++) {
if (c > 0) {
c--;
continue;
}
mutex_lock(&eventfs_mutex);
/* If ei->is_freed then just bail here, nothing more to do */
if (ei->is_freed) {
mutex_unlock(&eventfs_mutex);
goto out;
}
r = entry->callback(name, &mode, &cdata, &fops);
mutex_unlock(&eventfs_mutex);
[..]
ctx->pos++;
}
But this can cause the iterator to return a file that was already read.
That's because of the way the callback() works. Some events may not have
all files, and the callback can return 0 to tell eventfs to skip the file
for this directory.
for instance, we have:
# ls /sys/kernel/tracing/events/ftrace/function
format hist hist_debug id inject
and
# ls /sys/kernel/tracing/events/sched/sched_switch/
enable filter format hist hist_debug id inject trigger
Where the function directory is missing "enable", "filter" and
"trigger". That's because the callback() for events has:
static int event_callback(const char *name, umode_t *mode, void **data,
const struct file_operations **fops)
{
struct trace_event_file *file = *data;
struct trace_event_call *call = file->event_call;
[..]
/*
* Only event directories that can be enabled should have
* triggers or filters, with the exception of the "print"
* event that can have a "trigger" file.
*/
if (!(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE)) {
if (call->class->reg && strcmp(name, "enable") == 0) {
*mode = TRACE_MODE_WRITE;
*fops = &ftrace_enable_fops;
return 1;
}
if (strcmp(name, "filter") == 0) {
*mode = TRACE_MODE_WRITE;
*fops = &ftrace_event_filter_fops;
return 1;
}
}
if (!(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE) ||
strcmp(trace_event_name(call), "print") == 0) {
if (strcmp(name, "trigger") == 0) {
*mode = TRACE_MODE_WRITE;
*fops = &event_trigger_fops;
return 1;
}
}
[..]
return 0;
}
Where the function event has the TRACE_EVENT_FL_IGNORE_ENABLE set.
This means that the entries array elements for "enable", "filter" and
"trigger" when called on the function event will have the callback return
0 and not 1, to tell eventfs to skip these files for it.
Because the "skip to current ctx->pos" check happened for all entries, but
the ctx->pos++ only happened to entries that exist, it would confuse the
reading of a directory. Which would cause:
# ls /sys/kernel/tracing/events/ftrace/function/
format hist hist hist_debug hist_debug id inject inject
The missing "enable", "filter" and "trigger" caused ls to show "hist",
"hist_debug" and "inject" twice.
Update the ctx->pos for every iteration to keep its update and the "skip"
update consistent. This also means that on error, the ctx->pos needs to be
decremented if it was incremented without adding something.
Link: https://lore.kernel.org/all/20240104150500.38b15a62@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.172295263@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 493ec81a8f ("eventfs: Stop using dcache_readdir() for getdents()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If ei->is_freed is set in eventfs_iterate(), it means that the directory
that is being iterated on is in the process of being freed. Just exit the
loop immediately when that is ever detected, and separate out the return
of the entry->callback() from ei->is_freed.
Link: https://lore.kernel.org/linux-trace-kernel/20240104220048.016261289@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
For backchannel requests that lookup the appropriate nfs_client, use the
state-management rpc_clnt's rpc_timeout parameters for the backchannel's
response. When the nfs_client cannot be found, fall back to using the
xprt's default timeout parameters.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After commit 59464b262f ("SUNRPC: SOFTCONN tasks should time out when on
the sending list"), any 4.1 backchannel tasks placed on the sending queue
would immediately return with -ETIMEDOUT since their req timers are zero.
Initialize the backchannel's rpc_rqst timeout parameters from the xprt's
default timeout settings.
Fixes: 59464b262f ("SUNRPC: SOFTCONN tasks should time out when on the sending list")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
cxl_port_setup_targets() modifies the ->targets[] array of a switch
decoder. target_list_show() expects to be able to emit a coherent
snapshot of that array by "holding" ->target_lock for read. The
target_lock is held for write during initialization of the ->targets[]
array, but it is not held for write during cxl_port_setup_targets().
The ->target_lock() predates the introduction of @cxl_region_rwsem. That
semaphore protects changes to host-physical-address (HPA) decode which
is precisely what writes to a switch decoder's target list affects.
Replace ->target_lock with @cxl_region_rwsem.
Now the side-effect of snapshotting a unstable view of a decoder's
target list is likely benign so the Fixes: tag is presumptive.
Fixes: 27b3f8d138 ("cxl/region: Program target lists")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The decoder_populate_targets() helper walks all of the targets in a port
and makes sure they can be looked up in @target_map. Where @target_map
is a lookup table from target position to target id (corresponding to a
cxl_dport instance). However @target_map is only responsible for
conveying the active dport instances as indicated by interleave_ways.
When nr_targets > interleave_ways it results in
decoder_populate_targets() walking off the end of the valid entries in
@target_map. Given target_map is initialized to 0 it results in the
dport lookup failing if position 0 is not mapped to a dport with an id
of 0:
cxl_port port3: Failed to populate active decoder targets
cxl_port port3: Failed to add decoder
cxl_port port3: Failed to add decoder3.0
cxl_bus_probe: cxl_port port3: probe: -6
This bug also highlights that when the decoder's ->targets[] array is
written in cxl_port_setup_targets() it is missing a hold of the
targets_lock to synchronize against sysfs readers of the target list. A
fix for that is saved for a later patch.
Fixes: a5c2580216 ("cxl/bus: Populate the target list at decoder create")
Cc: <stable@vger.kernel.org>
Signed-off-by: Huang, Ying <ying.huang@intel.com>
[djbw: rewrite the changelog, find the Fixes: tag]
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The IPv6 network stack first checks the sockaddr length (-EINVAL error)
before checking the family (-EAFNOSUPPORT error).
This was discovered thanks to commit a549d055a2 ("selftests/landlock:
Add network tests").
Cc: Eric Paris <eparis@parisplace.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/r/0584f91c-537c-4188-9e4f-04f192565667@collabora.com
Fixes: 0f8db8cc73 ("selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
perf test 17 'Setup struct perf_event_attr' fails on s390 z/VM guest,
using linux-next kernel.
Root cause is the fall-back from hardware counter cycles
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
which returns -ENOENT on s390 z/VM guest. This causes the code to fall
back to software counter task-clock, as can be seen in the debug output:
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x1 (PERF_COUNT_SW_TASK_CLOCK) <-here
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
This succeeds on s390 z/VM guest.
This successful installation of the counter task-clock is not listed in
the expected results and the test case fails.
This is caused by commit eb2eac0c7b ("perf evsel: Fallback to
"task-clock" when not system wide") which introduced fall back from
event 'cycles' to event 'task-clock'.
To fix this on s390 allow event number 0 (cycles) and event number 1
(task-clock) as expected result.
Output before:
# ./perf test -Fv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-group1'
unsupp './tests/attr/test-stat-group1'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
expected config=0, got 1
FAILED './tests/attr/test-record-graph-default' - match failure
---- end ----
Setup struct perf_event_attr: FAILED!
#
Output after:
# ./perf test -F 17
17: Setup struct perf_event_attr : Ok
#
Fixes: eb2eac0c7b ("perf evsel: Fallback to "task-clock" when not system wide")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219143235.1075522-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The addr_location map and maps fields in the inner loop were missing
calls to map__get()/maps__get(). The subsequent addr_location__exit()
call in each loop puts the map/maps fields causing use-after-free
aborts.
This issue reproduces on at least arm64 and x86_64 with something
simple like `perf record -g ls` followed by `perf script -s script.py`
with the following script:
perf_db_export_mode = True
perf_db_export_calls = False
perf_db_export_callchains = True
def sample_table(*args):
print(f'sample_table({args})')
def call_path_table(*args):
print(f'call_path_table({args}')
Committer testing:
This test, just introduced by Ian Rogers, now passes, not segfaulting
anymore:
# perf test "perf script tests"
95: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207140911.3240408-1-ben.gainey@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
uniq() will write one command name over another causing the overwritten
string to be leaked. Fix by doing a pass that removes duplicates and a
second that removes the holes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chenyuan Mi <cymi20@fudan.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In its infinite wisdom, by default, SLang sets susp undef, and this can
only be un-done by calling SLtty_set_suspend_state(true). After every
SLang_init_tty().
Additionally, no provisions are made for maintaining the teletype
attributes across suspend/continue (outside of curses emulation
mode(?!), which provides full support, naturally), so we need to save
and restore the flags ourselves, as well as reset the text colours when
going under. We need to also re-draw the screen, and raising SIGWINCH,
shockingly, Just Works.
The correct solution would be to Not Use SLang, but as a stop-gap,
this makes TUI 'perf report' usable.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/0354dcae23a8713f75f4fed609e0caec3c6e3cd5.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After merging the net-next tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/net/phy/aquantia/aquantia_firmware.c: In function 'aqr_fw_load_memory':
drivers/net/phy/aquantia/aquantia_firmware.c:135:23: error: implicit declaration of function 'crc_ccitt_false'; did you mean 'crc_ccitt_byte'? [-Werror=implicit-function-declaration]
135 | crc = crc_ccitt_false(crc, crc_data, sizeof(crc_data));
| ^~~~~~~~~~~~~~~
| crc_ccitt_byte
Caused by commit e93984ebc1 ("net: phy: aquantia: add firmware load support")
interacting with commit ("lib: crc_ccitt_false() is identical to crc_itu_t()")
from the mm tree.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20231221130946.7ed9a805@canb.auug.org.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
arch_futex_atomic_op_inuser was not documented correctly
resulting in build time warnings.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit c902ba322c.
This reverts commit 50648968b3.
This reverts commit 77cef1e021.
This reverts commit 8f8d322bc4.
This reverts commit 6ca7b5486e.
This reverts commit db468f92c3.
This reverts commit 5f8c64c234.
This reverts commit ebdc193b2c.
The driver needs more work.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update to v1.17 released in:
https://github.com/intel/perfmon/pull/123
Add events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.23 released in:
https://github.com/intel/perfmon/pull/123
Updates to event descriptions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.02 released in:
https://github.com/intel/perfmon/pull/123
Removes events AMX_OPS_RETIRED.BF16 and AMX_OPS_RETIRED.INT8. Add
events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix that the core PMU is being specified for 2 uncore events. Specify
a PMU for the alderlake UNCORE_FREQ metric.
Conversion script updated in:
https://github.com/intel/perfmon/pull/126
Committer testing:
Before this patch the "perf all metricgroups test" was failing, now:
root@number:~# perf test metric
10: PMU events :
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
10.5: Parsing of metric thresholds with fake PMUs : Ok
61: Parse and process metrics : Ok
98: perf stat metrics (shadow stat) test : Skip
101: perf all metricgroups test : Ok
102: perf all metrics test : FAILED!
107: perf metrics value validation : Ok
root@number:~#
Test 102 is failing for another reason, not being able to get as many
counters as needed, Ian Rogers suggested disabling the NMI watchdog to
have more counters available:
root@number:/home/acme# cat /proc/sys/kernel/nmi_watchdog
1
root@number:/home/acme# echo 0 > /proc/sys/kernel/nmi_watchdog
root@number:/home/acme# perf test 102
102: perf all metrics test : Ok
root@number:/home/acme#
Closes: https://lore.kernel.org/lkml/ZZWOdHXJJ_oecWwm@kernel.org/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I removed all the users of this some time ago, but
evidently forgot the pointers. Remove them from the
data structure too.
Fixes: bfc58e2b98 ("um: remove process stub VMA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The iser_reg_resources structure has two pointers to MR but only one
mr_valid field. The implementation assumes that we use only *sig_mr when
pi_enable is true. Otherwise, we use only *mr. However, it is only
sometimes correct. Read commands without protection information occur even
when pi_enble is true. For example, the following SCSI commands have a
Data-In buffer but never have protection information: READ CAPACITY (16),
INQUIRY, MODE SENSE(6), MAINTENANCE IN. So, we use
*sig_mr for some SCSI commands and *mr for the other SCSI commands.
In most cases, it works fine because the remote invalidation is applied.
However, there are two cases when the remote invalidation is not
applicable.
1. Small write commands when all data is sent as an immediate.
2. The target does not support the remote invalidation feature.
The lazy invalidation is used if the remote invalidation is impossible.
Since, at the lazy invalidation, we always invalidate the MR we want to
use, the wrong MR may be invalidated.
To fix the issue, we need a field per MR that indicates the MR needs
invalidation. Since the ib_mr structure already has such a field, let's
use ib_mr.need_inval instead of iser_reg_resources.mr_valid.
Fixes: b76a439982 ("IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handover")
Link: https://lore.kernel.org/r/20231219072311.40989-1-sergeygo@nvidia.com
Acked-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
__cant_sleep was already used and exported by the scheduler.
The name had to be changed to a UML specific one.
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Richard Weinberger <richard@nod.at>
The offset is currently always zero so the backend can't distinguish
between accesses to different ioremapped areas.
Fixes: 522c532c4f ("virt-pci: add platform bus support")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
devm_input_allocate_device() already sets parent of the new input
device, there's no need to set it up explicitly.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/ZYOseYfVgg0Ve6Zl@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously, the sequence number in the regulator event subsystem was
updated without atomic operations, potentially leading to race
conditions. This commit addresses the issue by making the sequence
number atomic.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240104141314.3337037-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is nothing OF-specific in the driver, so switch from OF properties
helpers to generic device helpers.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/ZYOsUfKceOFXuCt5@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The gotol implementation uses a wrong data type for the offset: it
should be s32, not s16.
Fixes: c690191e23 ("s390/bpf: Implement unconditional jump with 32-bit offset")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In commit f320bc742b ("KVM: arm64: Prepare the creation of s1
mappings at EL2"), pKVM switches from a temporary host-provided
page-table to its own page-table at EL2. Since there is only a single
TTBR for the nVHE hypervisor, this involves disabling and re-enabling
the MMU in __pkvm_init_switch_pgd().
Unfortunately, the memory barriers here are not quite correct.
Specifically:
- A DSB is required to complete the TLB invalidation executed while
the MMU is disabled.
- An ISB is required to make the new TTBR value visible to the
page-table walker before the MMU is enabled in the SCTLR.
An earlier version of the patch actually got this correct:
https://lore.kernel.org/lkml/20210304184717.GB21795@willie-the-truck/
but thanks to some badly worded review comments from yours truly, these
were dropped for the version that was eventually merged.
Bring back the barriers and fix the potential issue (but note that this
was found by code inspection).
Cc: Quentin Perret <qperret@google.com>
Fixes: f320bc742b ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104164220.7968-1-will@kernel.org
* kvm-arm64/vgic-6.8:
: .
: Fix for the GICv4.1 vSGI pending state being set/cleared from
: userspace, and some cleanup to the MMIO and userspace accessors
: for the pending state.
:
: Also a fix for a potential UAF in the ITS translation cache.
: .
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
KVM: arm64: vgic-v3: Reinterpret user ISPENDR writes as I{C,S}PENDR
KVM: arm64: vgic: Use common accessor for writes to ICPENDR
KVM: arm64: vgic: Use common accessor for writes to ISPENDR
KVM: arm64: vgic-v4: Restore pending state on host userspace write
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is a potential UAF scenario in the case of an LPI translation
cache hit racing with an operation that invalidates the cache, such
as a DISCARD ITS command. The root of the problem is that
vgic_its_check_cache() does not elevate the refcount on the vgic_irq
before dropping the lock that serializes refcount changes.
Have vgic_its_check_cache() raise the refcount on the returned vgic_irq
and add the corresponding decrement after queueing the interrupt.
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104183233.3560639-1-oliver.upton@linux.dev
A previous commit added an earlier break condition here, which is fine if
we're using non-local task_work as it'll be run on return to userspace.
However, if DEFER_TASKRUN is used, then we could be leaving local
task_work that is ready to process in the ctx list until next time that
we enter the kernel to wait for events.
Move the break condition to _after_ we have run task_work.
Cc: stable@vger.kernel.org
Fixes: 846072f16e ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Revert P2SB / PCI deadlock fix due issue with older HW w/o P2SB.
The following is an automated shortlog grouped by driver:
p2sb:
- Revert: Allow p2sb_bar() calls during PCI device probe
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZZbdygAKCRBZrE9hU+XO
MX6wAQDFPp8Ko9EGGfBtBn3AoZZ12bcj1DOHi3FIafnfrFiBpAD/Q0v9qpL6PwI1
dIS55gNAsv6RdOcBRSjXWJoySg3EcwA=
=ILxf
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
"Unfortunately the P2SB deadlock fix broke some older HW and we need
some time to figure out the best way to fix the issue so reverting the
deadlock fix for now"
* tag 'platform-drivers-x86-v6.7-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
Revert "platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe"
It became more than wished, partly because of vacations.
But all changes are fairly device-specific and should be safe to
apply.
- A regression fix for Oops at ASoC HD-audio probe
- A series of TAS2781 HD-audio codec fixes
- A random build regression fix with SPI helpers
- Minor endianness fix for USB-audio mixer code
- ASoC FSL driver error handling fix
- ASoC Mediatek driver register fix
- A series of ASoC meson g12a driver fixes
- A few usual HD-audio oneliner quirks
-----BEGIN PGP SIGNATURE-----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=+Nvo
-----END PGP SIGNATURE-----
Merge tag 'sound-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It became more than wished, partly because of vacations. But all
changes are fairly device-specific and should be safe to apply:
- A regression fix for Oops at ASoC HD-audio probe
- A series of TAS2781 HD-audio codec fixes
- A random build regression fix with SPI helpers
- Minor endianness fix for USB-audio mixer code
- ASoC FSL driver error handling fix
- ASoC Mediatek driver register fix
- A series of ASoC meson g12a driver fixes
- A few usual HD-audio oneliner quirks"
* tag 'sound-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP ProBook 440 G6
ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF mux
ASoC: meson: g12a-toacodec: Fix event generation
ASoC: meson: g12a-tohdmitx: Validate written enum values
ASoC: meson: g12a-toacodec: Validate written enum values
ASoC: SOF: Intel: hda-codec: Delay the codec device registration
ALSA: hda: cs35l41: fix building without CONFIG_SPI
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ZBook
ALSA: hda/realtek: enable SND_PCI_QUIRK for hp pavilion 14-ec1xxx series
ASoC: mediatek: mt8186: fix AUD_PAD_TOP register and offset
ALSA: scarlett2: Convert meter levels from little-endian
ALSA: hda/tas2781: remove sound controls in unbind
ALSA: hda/tas2781: move set_drv_data outside tasdevice_init
ALSA: hda/tas2781: fix typos in comment
ALSA: hda/tas2781: do not use regcache
ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enable
qaic:
- fix GEM import
- add quirk for soc version
bridge:
- parade-ps8640, ti-sn65dsi86: fix aux reads bounds
mgag200:
- fix gamma LUT init
i915:
- Fix bogus DPCD rev usage for DP phy test pattern setup
- Fix handling of MMIO triggered reports in the OA buffer
-----BEGIN PGP SIGNATURE-----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=OvB8
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-01-04' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"These were from over the holiday period, mainly i915, a couple of
qaic, bridge and an mgag200.
qaic:
- fix GEM import
- add quirk for soc version
bridge:
- parade-ps8640, ti-sn65dsi86: fix aux reads bounds
mgag200:
- fix gamma LUT init
i915:
- Fix bogus DPCD rev usage for DP phy test pattern setup
- Fix handling of MMIO triggered reports in the OA buffer"
* tag 'drm-fixes-2024-01-04' of git://anongit.freedesktop.org/drm/drm:
drm/i915/perf: Update handling of MMIO triggered reports
drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_pattern
drm/mgag200: Fix gamma lut not initialized for G200ER, G200EV, G200SE
drm/bridge: ps8640: Fix size mismatch warning w/ len
drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer
drm/bridge: parade-ps8640: Never store more than msg->size bytes in AUX xfer
accel/qaic: Implement quirk for SOC_HW_VERSION
accel/qaic: Fix GEM import path code
MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.
Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.
v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.
Fixes: ef75c25e8f ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
User won't care about inproper hash options in the TCP header if they
don't use neither TCP-AO nor TCP-MD5. Yet, those logs can add up in
syslog, while not being a real concern to the host admin:
> kernel: TCP: TCP segment has incorrect auth options set for XX.20.239.12.54681->XX.XX.90.103.80 [S]
Keep silent and avoid logging when there aren't any keys in the system.
Side-note: I also defined static_branch_tcp_*() helpers to avoid more
ifdeffery, going to remove more ifdeffery further with their help.
Reported-by: Christian Kujau <lists@nerdbynature.de>
Closes: https://lore.kernel.org/all/f6b59324-1417-566f-a976-ff2402718a8d@nerdbynature.de/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 2717b5adea ("net/tcp: Add tcp_hash_fail() ratelimited logs")
Link: https://lore.kernel.org/r/20240104-tcp_hash_fail-logs-v1-1-ff3e1f6f9e72@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-03 (i40e, ice, igc)
This series contains updates to i40e, ice, and igc drivers.
Ke Xiao fixes use after free for unicast filters on i40e.
Andrii restores VF MSI-X flag after PCI reset on i40e.
Paul corrects admin queue link status structure to fulfill firmware
expectations for ice.
Rodrigo Cataldo corrects value used for hicredit calculations on igc.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
====================
Link: https://lore.kernel.org/r/20240103193254.822968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
