These are all static and in one compilation unit so the inline has no
effect on the binary. Except if FTRACE is enabled, then 3 functions
which were already not inlined now get the nops added which allows them
to be traced.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231211161331.1277825-2-james.clark@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The ESS capability bit is reserved in frames transmitted by
the client, so we shouldn't set it. Since we've set it for
decades, keep that old behaviour unless we're connection to
a new EHT AP.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.65005aba900b.I3d00c8741400572a89a7508b5ae612c968874ad7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When doing a channel switch, cfg80211_update_known_bss may be called
with a BSS where both proberesp_ies and beacon_ies is set. If that
happens, both need to be consumed.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.07a88656d7df.I0fe9fc599382de0eccf96455617e377d9c231966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The specification says that this information should not be explicitly
included in the per-STA profile. However, we need this information
readily available in the BSS for userspace and also internally when
associating. As such, append the appropriate element before
adding/updating the BSS.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.abde63d9cc6d.I3d346be0f84f51dccf4f4f92a3e997e6102b9456@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ENOTSUPP isn't a standard error code, don't use it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.0214b6c79756.I2536bc8426ae15c8cff7ad199e57f06e2e404f13@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ENOTSUP isn't a standard error code. EOPNOTSUPP should be used instead.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.3841b71c867d.Idf2ad01d9dfe8d6d6c352bf02deb06e49701ad1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There may be cases where puncturing isn't possible, and
a connection needs to be downgraded. Add a hardware flag
to support this.
This is likely temporary: it seems we will need to move
puncturing to the chandef/channel context.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.c1e89ea55e93.I37b8ca0ee64d5d7699e351785a9010afc106da3c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for setting the TID to link mapping for a non-AP MLD
station.
This is useful in cases user space needs to restrict the possible
set of active links, e.g., since it got a BSS Transition Management
request forcing to use only a subset of the valid links etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.da4d56a5f3ff.Iacf88e943326bf9c169c49b728c4a3445fdedc97@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With the locking rework, more functions need to be called
with the wiphy mutex held. Document that, and for that use
the "Context" description that shows up more nicely in the
generated documentation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.24fa44c7eeb4.I8c9e030ddd78e07c99dd21fe1d5156555390f92e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes there may be reasons for which a BSS that's
actually found in scan cannot be used to connect to,
for example a nonprimary link of an NSTR mobile AP MLD
cannot be used for normal direct connections to it.
Not indicating these to userspace as we do now of course
avoids being able to connect to them, but it's better if
they're shown to userspace and it can make an appropriate
decision, without e.g. doing an additional ML probe.
Thus add an indication of what a BSS can be used for,
currently "normal" and "MLD link", including a reason
bitmap for it being not usable.
The latter can be extended later for certain BSSes if there
are other reasons they cannot be used.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.0464f25e0b1d.I9f70ca9f1440565ad9a5207d0f4d00a20cca67e7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Newest firmware has completely offloaded this logic and this command
will be deprecated soon. Based on a capability bit advertised by the
firmware, skip this command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.e64ef70c0133.I9f47cdef2ba45f1f383b70023857376973de3a8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's only one user of this code, which is STA unblock
during sleep for uAPSD on really old devices. Instead of
having this all through the API with calls up and down,
just implemented a special-case CMD_BLOCK_TXQS flag for
this, it's only needed in the old gen1 transport.
While at it, fix a complain that lockdep would have, as
we lock the cmd queue and then the TXQs in the reclaim
by using spin_lock_nested(). We no longer need to disable
BHs in iwl_trans_pcie_block_txq_ptrs() since it's called
with them disabled already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.2bd95e0570fc.I16486dbc82570d2f73a585872f5394698627310d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This causes fortify warnings when compiled against recent kernels
with recent compilers, and generally is not supported in the kernel
anymore.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.367a2c77b9be.I4964ec8ca1d30c7c3163f9873814c8205a1a14eb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We shouldn't access the device if we don't hold a reference,
and if - after locking - we see that it has no bus, we also
can't do anything, in fact, pci_stop_and_remove_bus_device()
will be a no-op.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.6c0879e695f7.I1d3ce75ecad32a4cbf1b9dad61bfb7bc7821fdd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This can be used by the user space when it wants to clear the data we
collected so far for privacy reasons.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.d5e97d5ec0d9.I7a5e836e6109e1fce7e6301dba8d1f28e60a5440@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there's not going to be any data in the data event, we
don't need to add it at all (unlike the TX version, it has
no data at all.)
Also combine the tracing into a separate inline so we only
call iwl_rx_trace_len() once, which also simplifies things,
and lets us have a single place to later add other checks.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.13325a4848d2.Ic9e7d794fc4aebfe5ac5136b539ee62789f210f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
EHT CQI is one of the EHT PHY capabilities. We don't support EHT CQI.
The non-triggered CQI feedback bit was unset in a previous patch,
but the triggered CQI feedback bit wasn't. Unset it.
Fixes: 0e21ec6edb ("wifi: iwlwifi: nvm: Update EHT capabilities for GL device")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.092528daf59e.I5715769490835819beddb00c91bbc9e806e170cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For an MLO connection, the BSSID of the link used during the scanning
should be used (and not the one from the default link).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.1e67dba640c1.I6c4941bfab3a04498370e58b402c64d990c39fbf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current handling of del pmksa with SSID is limited to FILS
security. In the current change the del pmksa support is extended
to SAE/OWE security offloads as well. For OWE/SAE offloads, the
PMK is generated and cached at driver/FW, so user app needs the
capability to request cache deletion based on SSID for drivers
supporting SAE/OWE offload.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://msgid.link/ecdae726459e0944c377a6a6f6cb2c34d2e057d0.1701262123.git.vinayak.yadawad@broadcom.com
[drop whitespace-damaged rdev_ops pointer completely, enabling tracing]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prefer native jiffies-wide 'unsigned long' for the 'last_active' field of
'struct airtime_info' and introduce 'ieee80211_sta_keep_active()' for airtime
check in 'ieee80211_txq_keep_active()' and 'ieee80211_sta_register_airtime()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://msgid.link/20231206060935.612241-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To support the WBRF mechanism, Wifi adapters utilized in the system must
register the frequencies in use (or unregister those frequencies no longer
used) via the dedicated calls. So that, other drivers responding to the
frequencies can take proper actions to mitigate possible interference.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Link: https://msgid.link/20231211100630.2170152-5-Jun.Ma2@amd.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The newly added WBRF feature needs this interface for channel
width calculation.
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://msgid.link/20231211100630.2170152-4-Jun.Ma2@amd.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce qmc_chan_{get,set}_ts_info() function to allow timeslots
modification at runtime.
The modification is provided using qmc_chan_set_ts_info() and will be
applied on next qmc_chan_start().
qmc_chan_set_ts_info() must be called with the channel rx and/or tx
stopped.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-18-herve.codina@bootlin.com
Timeslots setting is done at channel start() and stop().
There is no more need to do that during setup_chan().
Simply remove timeslot setting from setup_chan().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-17-herve.codina@bootlin.com
In order to support runtime timeslot route changes, enable the
channel timeslot entries at channel start() and disable them at
channel stop().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-16-herve.codina@bootlin.com
In order to support runtime timeslot route changes, some operations will
be different according the routing table used (common Rx and Tx table or
one table for Rx and one for Tx).
The is_tsa_64rxtx flag is introduced to avoid extra computation to
determine the table format each time we need it.
It is set once at initialization.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-15-herve.codina@bootlin.com
The Tx and Rx entries for a given channel are set in one function.
In order to modify Rx entries and Tx entries independently of one other,
split this function in one for the Rx part and one for the Tx part.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-14-herve.codina@bootlin.com
In order to allow runtime timeslot route changes, disabling channel TSA
entries needs to be supported.
Add support for this new feature.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-13-herve.codina@bootlin.com
The timeslots checked in qmc_check_chans() are the timeslots used.
With the introduction of the available timeslots, the used timeslots
are a subset of the available timeslots. The timeslots checked during
the qmc_check_chans() call should be the available ones.
Simply update and check the available timeslots instead of the used
timeslots in qmc_check_chans().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-12-herve.codina@bootlin.com
The newly introduced qmc_chan_setup_tsa* functions check that the
channel entries are not already used.
These checks are also performed by qmc_check_chans() and are no more
needed.
Remove them from qmc_check_chans().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-11-herve.codina@bootlin.com
Introduce the qmc_chan_setup_tsa* functions to setup entries related
to the given channel.
Use them during QMC channels setup.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-10-herve.codina@bootlin.com
qmc_setup_tsa* are called once at initialisation.
They initialize the QMC TSA table.
In order to introduce setup function later on for dynamic timeslots
management, rename the function to avoid later confusion.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-9-herve.codina@bootlin.com
Available timeslots masks define timeslots available for the related
channel. These timeslots are defined by the QMC binding.
Timeslots used are initialized to available timeslots but can be a
subset of available timeslots.
This prepares the dynamic timeslots management (ie. changing timeslots
at runtime).
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-8-herve.codina@bootlin.com
QMC child devices support is needed to avoid orphan DT nodes that use a
simple DT phandle to reference a QMC channel.
Allow to instantiate child devices and also extend the API to get the
qmc_chan using a child device.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20231205152116.122512-7-herve.codina@bootlin.com
The inline function specifier is present on some functions but it is
better to let the compiler decide inlining or not these functions.
Remove inline specifiers.
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-6-herve.codina@bootlin.com
In HDLC mode, some status flags related to the data read transfer can be
set by the hardware and need to be known by a QMC consumer for further
analysis.
Extend the API in order to provide these transfer status flags at the
read complete() call.
In TRANSPARENT mode, these flags have no meaning. Keep only one read
complete() API and update the consumers working in transparent mode.
In this case, the newly introduced flags parameter is simply unused.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-5-herve.codina@bootlin.com
The qmc_chan_reset_rx() set the is_rx_stopped flag. This leads to an
inconsistent state in the following sequence.
qmc_chan_stop()
qmc_chan_reset()
Indeed, after the qmc_chan_reset() call, the channel must still be
stopped. Only a qmc_chan_start() call can move the channel from stopped
state to started state.
Fix the issue removing the is_rx_stopped flag setting from
qmc_chan_reset()
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-4-herve.codina@bootlin.com
Running sparse (make C=1) on qmc.c raises a lot of warning such as:
...
warning: incorrect type in assignment (different address spaces)
expected struct cpm_buf_desc [usertype] *[noderef] __iomem bd
got struct cpm_buf_desc [noderef] [usertype] __iomem *txbd_free
...
Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.
Use the correct declaration to remove these warnings.
Fixes: 3178d58e0b ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-3-herve.codina@bootlin.com
Running sparse (make C=1) on tsa.c raises a lot of warning such as:
--- 8< ---
warning: incorrect type in assignment (different address spaces)
expected void *[noderef] si_regs
got void [noderef] __iomem *
--- 8< ---
Indeed, some variable were declared 'type *__iomem var' instead of
'type __iomem *var'.
Use the correct declaration to remove these warnings.
Fixes: 1d4ba0b81c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312051959.9YdRIYbg-lkp@intel.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231205152116.122512-2-herve.codina@bootlin.com
For some reason, the Arm DSU PMU driver uses kerneldoc-style comment
syntax (i.e. /** ) for non-kerneldoc comments. This makes the robots
very angry indeed, so just revert these to normal comments to stop
the noise.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312092000.8ltwotjt-lkp@intel.com/
Signed-off-by: Will Deacon <will@kernel.org>
This API was defined to formalize the access to internal iommu details on
some Tegra SOCs, but a few callers got missed. Add them.
The helper already masks by 0xFFFF so remove this code from the callers.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Nothing needs this pointer. Return a normal error code with the usual
IOMMU semantic that ENODEV means 'there is no IOMMU driver'.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A perfect driver would only call dev_iommu_priv_set() from its probe
callback. We've made it functionally correct to call it from the of_xlate
by adding a lock around that call.
lockdep assert that iommu_probe_device_lock is held to discourage misuse.
Exclude PPC kernels with CONFIG_FSL_PAMU turned on because FSL_PAMU uses a
global static for its priv and abuses priv for its domain.
Remove the pointless stores of NULL, all these are on paths where the core
code will free dev->iommu after the op returns.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Allocation of dev->iommu must be done under the
iommu_probe_device_lock. Mark this with lockdep to discourage future
mistakes.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Instead of returning 1 and trying to handle positive error codes just
stick to the convention of returning -ENODEV. Remove references to ops
from of_iommu_configure(), a NULL ops will already generate an error code.
There is no reason to check dev->bus, if err=0 at this point then the
called configure functions thought there was an iommu and we should try to
probe it. Remove it.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
