Currently sync thread is stopped from multiple contex:
- idle_sync_thread
- frozen_sync_thread
- __md_stop_writes
- md_set_readonly
- do_md_stop
And there are some problems:
1) sync_work is flushed while reconfig_mutex is grabbed, this can
deadlock because the work function will grab reconfig_mutex as well.
2) md_reap_sync_thread() can't be called directly while md_do_sync() is
not finished yet, for example, commit 130443d60b ("md: refactor
idle/frozen_sync_thread() to fix deadlock").
3) If MD_RECOVERY_RUNNING is not set, there is no need to stop
sync_thread at all because sync_thread must not be registered.
Factor out a helper stop_sync_thread(), so that above contex will behave
the same. Fix 1) by flushing sync_work after reconfig_mutex is released,
before waiting for sync_thread to be done; Fix 2) bt letting daemon thread
to unregister sync_thread; Fix 3) by always checking MD_RECOVERY_RUNNING
first.
Fixes: db5e653d7c ("md: delay choosing sync action to md_start_sync()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-4-yukuai1@huaweicloud.com
If md_set_readonly() failed, the array could still be read-write, however
'MD_RECOVERY_FROZEN' could still be set, which leave the array in an
abnormal state that sync or recovery can't continue anymore.
Hence make sure the flag is cleared after md_set_readonly() returns.
Fixes: 88724bfa68 ("md: wait for pending superblock updates before switching to read-only")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-3-yukuai1@huaweicloud.com
Commit ac61978196 ("md: use separate work_struct for md_start_sync()")
use a new sync_work to replace del_work, however, stop_sync_thread() and
__md_stop_writes() was trying to wait for sync_thread to be done, hence
they should switch to use sync_work as well.
Noted that md_start_sync() from sync_work will grab 'reconfig_mutex',
hence other contex can't held the same lock to flush work, and this will
be fixed in later patches.
Fixes: ac61978196 ("md: use separate work_struct for md_start_sync()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-2-yukuai1@huaweicloud.com
Disable MCBP(mid command buffer preemption) by default as old Mesa
hangs with it. We shall not enable the feature that breaks old usermode
driver.
Fixes: 50a7c8765c ("drm/amdgpu: enable mcbp by default on gfx9")
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Rework the _show() callback functions for the trip point temperature,
hysteresis and type attributes to avoid copying the values of struct
thermal_trip fields that they do not use and make them carry out the
same validation checks as the corresponding _store() callback functions.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Both trip_point_temp_store() and trip_point_hyst_store() use
thermal_zone_set_trip() to update a given trip point, but none of them
actually needs to change more than one field in struct thermal_trip
representing it. However, each of them effectively calls
__thermal_zone_get_trip() twice in a row for the same trip index value,
once directly and once via thermal_zone_set_trip(), which is not
particularly efficient, and the way in which thermal_zone_set_trip()
carries out the update is not particularly straightforward.
Moreover, input processing need not be done under the thermal zone lock
in any of these functions.
Rework trip_point_temp_store() and trip_point_hyst_store() to address
the above, move the part of thermal_zone_set_trip() that is still
useful to a new function called thermal_zone_trip_updated() and drop
the rest of it.
While at it, make trip_point_hyst_store() reject negative hysteresis
values.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Metrics were added by a callback but commit a4b8cfcabb ("perf
stat: Delay metric parsing") postponed this to allow optimizations based
on the CPU configuration.
In doing so it stopped errors in metric parsing from causing 'perf stat'
termination.
This change adds the termination for bad metric names back in.
Fixes: a4b8cfcabb ("perf stat: Delay metric parsing")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZXByT1K6enTh2EHT@kernel.org/
Link: https://lore.kernel.org/r/20231206183533.972028-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- After a full reset, VF's FB will be cleaned. This
includes the VCN's fw_shared memory.
However, there is no suspend-resume routine for
SRIOV VF. Therefore, the data in the fw_shared
memory will be lost forever and it causes engine
hang later on.
We must repopulate the data in fw_shared during
SRIOV hw_init
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to disable this after the last eviction
call, but before we disable the SDMA IP.
Fixes: b70438004a ("drm/amdgpu: move buffer funcs setting up a level")
Link: https://lore.kernel.org/r/87edgv4x3i.fsf@vps.thesusis.net
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Tested-by: Phillip Susi <phill@thesusis.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Phillip Susi <phill@thesusis.net>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Check if function is implemented before making the call.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were requested by a UMR user for debugging purposes.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The rdev->pm.dpm.ps allocated by kcalloc should be freed in every
following error-handling path. However, in the error-handling of
rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed,
resulting in a memleak in this function.
Fixes: d70229f704 ("drm/radeon/kms: add dpm support for trinity asics")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The rdev->pm.dpm.ps allocated by kcalloc should be freed in every
following error-handling path. However, in the error-handling of
rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed,
resulting in a memleak in this function.
Fixes: 80ea2c129c ("drm/radeon/kms: add dpm support for sumo asics (v2)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only PSPv13.0.6 SOCs take a longer time to reach steady state. Other
PSPv13 based SOCs don't need extended wait. Also, reduce PSPv13.0.6 wait
time.
Cc: stable@vger.kernel.org
Fixes: fc59889071 ("drm/amdgpu: update retry times for psp vmbx wait")
Fixes: d8c1925ba8 ("drm/amdgpu: update retry times for psp BL wait")
Link: https://lore.kernel.org/amd-gfx/34dd4c66-f7bf-44aa-af8f-c82889dd652c@amd.com/
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
To enable testing/development of DML2, expose a new debug mask for future use.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to read state of USR links in aquavanjaram SOC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to read state of WAFL links in aquavanjaram SOC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Does the same thing as:
commit 6740ec97bc ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/
Fixes: 67e38874b8 ("drm/amd/display: Increase num voltage states to 40")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Samson Tam <samson.tam@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
check the alloc_workqueue return value in radeon_crtc_init()
to avoid null-ptr-deref.
Fixes: fa7f517cb2 ("drm/radeon: rework page flip handling v4")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sort error data list to optimize the printing order.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Boot time error query is not available until fw a10109
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support new mca smu error code decoding from smu 85.86.0 for smu v13.0.6
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increment the driver if version and add new mems to the mertics table.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
* Enable writeback.
* Add multiple fixes for DML2 and DCN35.
* Introduce small code style adjustments.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This simple commit adjusts part of the code style in some of the dc bios
files.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
UBSAN errors observed in dmesg.
array-index-out-of-bounds in dml2/display_mode_core.c
[How]
Fix the index.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
drm_writeback requires to capture exact one frame in each writeback
call.
[HOW]
frame_capture is disabled after each writeback is completed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add a function to enable and disable DWB's frame captures.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hardware may require different warmup approaches - big buffer or
individual buffers.
[HOW]
Setup warmup for big buffer when it is required by specific hardware.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add a new field to keep track whether a crtc is previously
writeback-enabled.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Counter j was not updated to present the num of writeback_info when
writeback pipes are removed.
[HOW]
update j (num of writeback info) under the correct condition.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
hw_points_num is 0 before ogam LUT is programmed; however, function
"dwb3_program_ogam_pwl" assumes hw_points_num is always greater than 0,
i.e. substracting it by 1 as an array index.
[HOW]
Check hw_points_num is not equal to 0 before using it.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
wb_enabled field is set to false before it is used, and the following
code will never be executed.
[HOW]
Setting wb_enable to false after all removal work is completed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The enable and disable writeback calls need to be included in the
coressponding functions in dc_stream.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Handle writeback requests and fill in the required information for DWB
programming and setup.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Writeback connectors don't have a physical sink but DC still
needs a sink to function. Create a fake sink and stream for
writeback connectors
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We need to track the dc_link and it would get confusing if
re-using the amdgpu_dm_connector.
[HOW]
Creating new amdgpu_dm_wb_connector.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
This is to check connector type to avoid
unhandled null pointer for writeback connectors.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Fixes: 60e034f286 ("drm/amd/display: Revert "drm/amd/display: Use drm_connector in create_validate_stream_for_sink"")
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
We need to use this function for both amdgpu_dm_connectors
and drm_writeback_connectors. Modify it to operate on
a drm_connector as a common base.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We will be dealing with two types of connector: amdgpu_dm_connector
and drm_writeback_connector.
[HOW]
We want to find both and then cast to the appriopriate type afterwards.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writeback connectors are based on a different object:
drm_writeback_connector, and are therefore different from
amdgpu_dm_connector. We need to be careful to ensure code
designed for amdgpu_dm_connector doesn't inadvertently try
to operate on a drm_writeback_connector.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Create a drm_writeback_connector when connector signal equals
SIGNAL_TYPE_VIRTUAL.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Prepare a virtual connector for writeback.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously this only excluded build for a few amdgpu_dm
binaries which makes no sense.
[HOW]
Wrap the entire Makefile in "ifneq ($(CONFIG_DRM_AMD_DC),)"
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual stream encoder should not be a free match for thunderbolt or
usbc, and thus should be avoided.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current implementation will choose to use refclk as dscclk. This is not
recommended by hardware team as refclk is a fixed value which could
cause unnecessary power consumption or it could be not enough for large
DSC timings. So we are adding new interfaces so we could switch to use
dynamically generated DSCCLK by DTO. So DSCCLK is programmable based on
current pixel clock and dispclk.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In previous case, Replay didn't identify the IRQ type, This commit fixes
the issues for the interrupt.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
