Like in other K3 SoCs the chipid register is inside the wakeup
configuration space. Move the chipid node under a new bus to
better represent this topology and match other similar SoCs.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20231117140910.8747-4-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
K3 SoCs such as AM654x, AM64x. This subsystem is provided for the use
cases like implementation of custom peripheral interfaces, offloading of
tasks from the other processor cores of the SoC, etc.
Currently AM654x-EVM uses ICSSG driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20231128084537.3946895-1-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add support for querying the same ACPI Device-Specific-Method (DSM) as
Windows uses to determine things like speaker and mic routing.
This avoids the need to add DMI quirks for each new ESS8316 tablet model.
This has been tested on the following devices:
1. Chuwi Hi12 CHT with stereo speakers and IN2-mic-map,
this avoids the need to add a DMI quirk for this model.
2. Nanote UMPC-01 CHT with stereo speakers and IN1-mic-map,
the existing DMI quirk is still necessary because of a bug
in the DSM return values for the speakers (it returns mono).
3. Onda V80 plus CHT with mono speaker and IN1-mic-map,
DSM set quirks match the previously used defaults.
4. GP-electronic T701 BYT with mono speaker and IN2-mic-map,
DSM set quirks match the previously used defaults.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a is_bytcr helper variable to probe().
This is a preparation patch for determining the quirks through querying
the ACPI Device-Specific-Method (DSM) on the codec-device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of adding DMI quirks for each new tablet model which uses
the ESS8316 codec, the plan is to switch to querying the same ACPI
Device-Specific-Method (DSM) as Windows uses to determine things
like speaker and mic routing.
Call the new es83xx_dsm_dump() helper which logs various basic settings
which can be queried through the ACPI DSM method on the codec ACPI device,
this is intended to help with developing a DSM based solution to replace
most DMI quirks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[hdegoede@redhat.com: improve commit message]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the ES83xx codec configuration is exposed in the DSDT table
and accessible via a _DSM method. Start adding basic definitions and
helpers to dump the information.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 014fdeb0d7 ("ASoC: SOF: Move sof_of_machine_select() to
sof-of-dev.c from sof-audio.c") caused a circular dependency between
the snd_sof and snd_sof_of modules:
depmod: ERROR: Cycle detected: snd_sof -> snd_sof_of -> snd_sof
depmod: ERROR: Found 2 modules in dependency cycles!
Move the function back with sof_machine_select().
Fixes: 014fdeb0d7 ("ASoC: SOF: Move sof_of_machine_select() to sof-of-dev.c from sof-audio.c")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231204033549.2020289-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we will freeze slabs when moving them out of node partial list to
cpu partial list, this method needs two cmpxchg_double operations:
1. freeze slab (acquire_slab()) under the node list_lock
2. get_freelist() when pick used in ___slab_alloc()
Actually we don't need to freeze when moving slabs out of node partial
list, we can delay freezing to when use slab freelist in ___slab_alloc(),
so we can save one cmpxchg_double().
And there are other good points:
- The moving of slabs between node partial list and cpu partial list
becomes simpler, since we don't need to freeze or unfreeze at all.
- The node list_lock contention would be less, since we don't need to
freeze any slab under the node list_lock.
We can achieve this because there is no concurrent path would manipulate
the partial slab list except the __slab_free() path, which is now
serialized by slab_test_node_partial() under the list_lock.
Since the slab returned by get_partial() interfaces is not frozen anymore
and no freelist is returned in the partial_context, so we need to use the
introduced freeze_slab() to freeze it and get its freelist.
Similarly, the slabs on the CPU partial list are not frozen anymore,
we need to freeze_slab() on it before use.
We can now delete acquire_slab() as it became unused.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
We will have unfrozen slabs out of the node partial list later, so we
need a freeze_slab() function to freeze the partial slab and get its
freelist.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Now the partially empty slub will be frozen when taken out of node partial
list, so the __slab_free() will know from "was_frozen" that the partially
empty slab is not on node partial list and is a cpu or cpu partial slab
of some cpu.
But we will change this, make partial slabs leave the node partial list
with unfrozen state, so we need to change __slab_free() to use the new
slab_test_node_partial() we just introduced.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
If controller reset occurs when allocating namespace, both
nvme_reset_work and nvme_scan_work will hang, as shown below.
Test Scripts:
for ((t=1;t<=128;t++))
do
nsid=`nvme create-ns /dev/nvme1 -s 14537724 -c 14537724 -f 0 -m 0 \
-d 0 | awk -F: '{print($NF);}'`
nvme attach-ns /dev/nvme1 -n $nsid -c 0
done
nvme reset /dev/nvme1
We will find that both nvme_reset_work and nvme_scan_work hung:
INFO: task kworker/u249:4:17848 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:kworker/u249:4 state:D stack: 0 pid:17848 ppid: 2
flags:0x00000028
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
blk_mq_freeze_queue_wait+0x84/0xc0
nvme_wait_freeze+0x40/0x64 [nvme_core]
nvme_reset_work+0x1c0/0x5cc [nvme]
process_one_work+0x1d8/0x4b0
worker_thread+0x230/0x440
kthread+0x114/0x120
INFO: task kworker/u249:3:22404 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:kworker/u249:3 state:D stack: 0 pid:22404 ppid: 2
flags:0x00000028
Workqueue: nvme-wq nvme_scan_work [nvme_core]
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
rwsem_down_write_slowpath+0x32c/0x98c
down_write+0x70/0x80
nvme_alloc_ns+0x1ac/0x38c [nvme_core]
nvme_validate_or_alloc_ns+0xbc/0x150 [nvme_core]
nvme_scan_ns_list+0xe8/0x2e4 [nvme_core]
nvme_scan_work+0x60/0x500 [nvme_core]
process_one_work+0x1d8/0x4b0
worker_thread+0x260/0x440
kthread+0x114/0x120
INFO: task nvme:28428 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
task:nvme state:D stack: 0 pid:28428 ppid: 27119
flags:0x00000000
Call trace:
__switch_to+0xb4/0xfc
__schedule+0x22c/0x670
schedule+0x4c/0xd0
schedule_timeout+0x160/0x194
do_wait_for_common+0xac/0x1d0
__wait_for_common+0x78/0x100
wait_for_completion+0x24/0x30
__flush_work.isra.0+0x74/0x90
flush_work+0x14/0x20
nvme_reset_ctrl_sync+0x50/0x74 [nvme_core]
nvme_dev_ioctl+0x1b0/0x250 [nvme_core]
__arm64_sys_ioctl+0xa8/0xf0
el0_svc_common+0x88/0x234
do_el0_svc+0x7c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
The reason for the hang is that nvme_reset_work occurs while nvme_scan_work
is still running. nvme_scan_work may add new ns into ctrl->namespaces
list after nvme_reset_work frozen all ns->q in ctrl->namespaces list.
The newly added ns is not frozen, so nvme_wait_freeze will wait forever.
Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so
nvme_scan_work will also wait forever. Now we are deadlocked!
PROCESS1 PROCESS2
============== ==============
nvme_scan_work
... nvme_reset_work
nvme_validate_or_alloc_ns nvme_dev_disable
nvme_alloc_ns nvme_start_freeze
down_write ...
nvme_ns_add_to_ctrl_list ...
up_write nvme_wait_freeze
... down_read
nvme_alloc_ns blk_mq_freeze_queue_wait
down_write
Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in
nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check
it before adding the new namespace (under the namespaces_rwsem).
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn:
potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)"
Prevent the contents of kernel memory from being leaked to user space
via speculative execution by using array_index_nospec.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Currently two similar config options NVME_HOST_AUTH and NVME_TARGET_AUTH
have almost same descriptions. It is confusing to choose them in
menuconfig. Improve the descriptions to distinguish them.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This can be an expensive call on some kernel configs. Move it to the end
after checking the cheaper ways to determine if the command is allowed.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
A different CPU may be setting the ctrl->state value, so ensure proper
barriers to prevent optimizing to a stale state. Normally it isn't a
problem to observe the wrong state as it is merely advisory to take a
quicker path during initialization and error recovery, but seeing an old
state can report unexpected ENETRESET errors when a reset request was in
fact successful.
Reported-by: Minh Hoang <mh2022@meta.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
The controller state is typically written by another CPU, so reading it
should ensure no optimizations are taken. This is a repeated pattern in
the driver, so start with adding a convenience function that returns the
controller state with READ_ONCE().
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
soc_gpio_set_value() already uses devm_gpiod_get(), lets be consistent
and use devm_gpiod_get() for all GPIOs.
This allows removing the intel_dsi_vbt_gpio_cleanup() function,
which only function was to put the GPIO-descriptors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201161130.23976-1-hdegoede@redhat.com
Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.
Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.
This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.
Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
If a pin isn't marked as a wake source processing any interrupts is
just going to destroy battery life. The APU may wake up from a hardware
sleep state to process the interrupt but not return control to the OS.
Mask interrupt for all non-wake source pins at suspend. They'll be
re-enabled at resume.
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231203032431.30277-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 4e04005256 ("virtio-blk: support polling I/O") triggers the
following gcc 13 W=1 warnings:
drivers/block/virtio_blk.c: In function ‘init_vq’:
drivers/block/virtio_blk.c:1077:68: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Wformat-truncation=]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~
drivers/block/virtio_blk.c:1077:58: note: directive argument in the range [-2147483648, 65534]
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~
drivers/block/virtio_blk.c:1077:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
1077 | snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is a false positive because the lower bound -2147483648 is
incorrect. The true range of i is [0, num_vqs - 1] where 0 < num_vqs <
65536.
The code mixes int, unsigned short, and unsigned int types in addition
to using "%d" for an unsigned value. Use unsigned short and "%u"
consistently to solve the compiler warning.
Cc: Suwan Kim <suwan.kim027@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312041509.DIyvEt9h-lkp@intel.com/
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204140743.1487843-1-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spi_new_device() function returns NULL on error, it doesn't return
error pointers.
Fixes: 70505ea6de ("platform/x86: x86-android-tablets: Add support for SPI device instantiation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/4b1b2395-c7c5-44a4-b0b0-6d091c7f46a2@moroto.mountain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The ISL76682 is very basic ALS which only supports ALS or IR mode
in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
other fancy functionality. Document it as trivial device.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231127212726.77707-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the Qualcomm X1E80100 SoC Low Power Audio SubSystem Low Power
Island (LPASS LPI) pin controller, compatible with earlier SM8550 model.
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231129155738.167030-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On j7200, during suspend to ram pinctrl contexts are lost. To save and
restore contexts during suspend/resume, the flag PCS_CONTEXT_LOSS_OFF
shall be set.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-2-704e7dc24460@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the "ti,j7200-padconf" compatible to support suspend to ram on
j7200.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-1-704e7dc24460@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinconf-groups debugfs file dumps each valid configuration item of
all pin groups. Some platforms and devices may have pin groups which
cannot be accessed, according to commit 691bf5d5a7 ("pinctrl: qcom:
Don't allow protected pins to be requested"). Fail for each
configuration item of an invalid pin group by checking the GPIO chip's
valid mask.
The validity of the pin group cannot be checked in the generic pinconf
dump (function "pinconf_generic_dump_one"), as it does not directly
interact with the gpiochip or the pinmux callbacks (which would give it
access to the request callback). Instead, an entry contains the ID and
name of the pingroup with no properties when all items fail.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231128020202.728156-3-mailingradian@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Lenovo M90 Gen5 is equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI
connected. For subwoofers to work, it requires both to enable amplifier
support, and to enable output to subwoofers via 0x17 quirk (similalry to
XPS 9510/9520).
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231203233006.100558-1-alex.vinarskis@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.
Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of having a single file with all bridge chains, list bridges
under a corresponding per-encoder debugfs directory.
While we are at it, also slightly improve the formatting of the bridge
data: split a single line entry into multiple lines, include the symbol
name of the bridge funcs and add the textual representation of the
bridge ops.
Example of the listing:
$ cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dsi_mgr_bridge_funcs
type: [0] Unknown
ops: [0]
bridge[1]: lt9611uxc_bridge_funcs
type: [11] HDMI-A
OF: /soc@0/geniqup@9c0000/i2c@994000/hdmi-bridge@2b:lontium,lt9611uxc
ops: [7] detect edid hpd
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203115315.1306124-3-dmitry.baryshkov@linaro.org
Each of connectors and CRTCs used by the DRM device provides debugfs
directory, which is used by several standard debugfs files and can
further be extended by the driver. Add such generic debugfs directories
for encoder.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203115315.1306124-2-dmitry.baryshkov@linaro.org
Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
same functionality for the DRM bridge chain termination.
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-7-dmitry.baryshkov@linaro.org
Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
same functionality for the DRM bridge chain termination.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-6-dmitry.baryshkov@linaro.org
Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-4-dmitry.baryshkov@linaro.org
Define a helper for creating simple transparent bridges which serve the
only purpose of linking devices into the bridge chain up to the last
bridge representing the connector. This is especially useful for
DP/USB-C bridge chains, which can span across several devices, but do
not require any additional functionality from the intermediate bridges.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-2-dmitry.baryshkov@linaro.org
The Vishay VEMl6075 is a low power, 16-bit resolution UVA and UVB
light sensor with I2C interface and noise compensation (visible and
infrarred).
Every UV channel generates an output signal measured in counts per
integration period, where the integration time is configurable.
This driver adds support for both UV channels and the ultraviolet
index (UVI) inferred from them according to the device application note
with open-air (no teflon) coefficients.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-3-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Vishay VEML6075 is a 16-bit digital UVA and UVB sensor with I2C
interface.
Add bindings and an example for the Vishay VEML6075.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-2-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently there are only two modifiers for ultraviolet light: a generic
one for any ultraviolet light (IIO_MOD_LIGHT_UV) and one for deep
ultraviolet (IIO_MOD_LIGHT_DUV), which is also referred as ultraviolet
C (UV-C) band and covers short-wave ultraviolet.
There are still no modifiers for the long-wave and medium-wave
ultraviolet bands. These two bands are the main components used to
obtain the UV index on the Earth's surface.
Add modifiers for the ultraviolet A (UV-A) and ultraviolet B (UV-B)
bands.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-1-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In mcp3564_config() fix the hardware identification logic
based on the hardware ID registers. Second part of the code was
disabled by an logic error.
Fix a typo related to the "MODULE_DESCRIPTION".
Fixes: 33ec3e5fc1 (iio: adc: adding support for MCP3564 ADC)
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20231129135619.63475-1-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
