In nbio v7_9, host driver should not issu gpu reset
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can override SR watermarks but not Z8 ones.
[How]
Add new parameters for Z8 matching the SR ones and feed them into the
states.
These also weren't being applied to every state, so make sure that
we loop over and update all SOC states if given an override.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In the new pipe resource management logic, the special handling for
stereo timings is missing.
This commit implements the same stereo timings handling as old
pipe resource management code.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When ODM slice count is changed, otg master pipe's pixel clock params is
no longer valid as the value is dependent on ODM slice count.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The smu needs to get the rlc power down message to sync the rlc state
with smu, the rlc state updating message need to be sent at while smu
begin suspend sequence , otherwise SMU will crash while RLC state is not
notified by driver, and rlc state probally changed after that
notification, so it needs to notify rlc state to smu at the end of the
suspend sequence in amdgpu_device_suspend() that can make sure the rlc
state is correctly set to SMU.
[ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
[ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
[ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features.
[ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features!
[ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 110.884394] PM: suspend of devices aborted after 21213.620 msecs
[ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs
[ 110.884405] PM: Some devices failed to suspend, or early wake event detected
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed anymore.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In dcn32 DML pipes are ordered the same as dc pipes but only for used
pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices
would be 0 and 1 respectively. However
update_pipe_slice_table_with_split_flags doesn't skip indices for free
pipes. This causes us to not reference correct dml pipe output when
building pipe topology.
[how]
Use two variables to iterate dc and dml pipes respectively and only
increment dml pipe index when current dc pipe is not free.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the link requests to skip implicit eDP power control, we should honor
that request.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Update to the new values per HW team request. Affects both stutter
and z8.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC IP 9.4.2 and up support TA reporting of the number
of xGMI links between peers.
Tested-by: Vignesh Chander <vignesh.chander@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes issue where user events of type KFD_EVENT_TYPE_HW_EXCEPTION do not
have valid data
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML2 means that the dcn3x policy for calculating z-state support
no longer runs from validate_bandwidth.
This means we are unconditionally allowing Z8, the hardware default.
[How]
Port the policy over to DCN35, but with a few modifications:
- Don't use min_dst_y_next_start as a check for Z8/Z10 allow
- Add support for overriding the Z10 stutter period per ASIC
- Cleanup the code to make the policy assignment more clear
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When waiting for the ACK for INBOX0 message,
we have to ensure to include the udelay
for proper wait time
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To support dynamic switching for Replay timing sync mechanism.
Reviewed-by: ChunTao Tso <chuntao.tso@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs attribute to read power management metrics. A snapshot is
captured to the buffer when the attribute is read.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to fetch PM metrics sample from SMU v13.0.6
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add API support to fetch a snapshot of power management metrics from PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Declaration of 'struct drm_device *dev' is redundant, as
'connector->dev' & 'dev_get_drvdata(kdev)' can be directly passed to
'drm_to_adev', without any intermediate DRM device 'dev' variable
Cc: Roman Li <roman.li@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Document what each amdgpu driver reset method does.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The example for the Mediatek PMIC keys is incomplete as the binding is
the full PMIC, not just the sub-functions. It is preferred for MFD
examples to be complete in the top-level MFD device binding rather than
piecemeal in each sub-function binding.
This also fixes an undocumented (by schema) compatible warning for
"mediatek,mt6397".
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128214816.3975893-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The example for the Spreadtrum SC27xx PMIC vibrator is incomplete as the
binding is the full PMIC, not just the sub-functions. It is preferred
for MFD examples to be complete in the top-level MFD device binding
rather than piecemeal in each sub-function binding.
This also fixes an undocumented (by schema) compatible warning for
"sprd,sc2731".
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128214809.3975719-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The perf test "probe libc's inet_pton & backtrace it with ping" fails on
powerpc as below:
# perf test -v "probe libc's inet_pton & backtrace it with
ping"
85: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 96028
ping 96056 [002] 127271.101961: probe_libc:inet_pton: (7fffa1779a60)
7fffa1779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
This test installs a probe on libc's inet_pton function, which will use
uprobes and then uses perf trace on a ping to localhost. It gets 3
levels deep backtrace and checks whether it is what we expected or not.
The test started failing from RHEL 9.4 where as it works in previous
distro version (RHEL 9.2). Test expects gaih_inet function to be part of
backtrace. But in the glibc version (2.34-86) which is part of distro
where it fails, this function is missing and hence the test is failing.
From nm and ping command output we can confirm that gaih_inet function
is not present in the expected backtrace for glibc version glibc-2.34-86
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
00000000001273e0 t gaih_inet_serv
00000000001cd8d8 r gaih_inet_typeproto
[root@xxx perf]# perf script -i /tmp/perf.data.6E8
ping 104048 [000] 128582.508976: probe_libc:inet_pton: (7fff83779a60)
7fff83779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff8372a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11dc73534 [unknown] (/usr/bin/ping)
7fff8362a8c4 __libc_start_call_main+0x84 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fff9d52a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
With version glibc-2.34-60 gaih_inet function is present as part of the
expected backtrace. So we cannot just remove the gaih_inet function from
the backtrace.
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
0000000000130490 t gaih_inet.constprop.0
000000000012e830 t gaih_inet_serv
00000000001d45e4 r gaih_inet_typeproto
[root@xxx perf]# ./perf script -i /tmp/perf.data.b6S
ping 67906 [000] 22699.591699: probe_libc:inet_pton_3: (7fffbdd80820) 7fffbdd80820 __GI___inet_pton+0x0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31160 gaih_inet.constprop.0+0xcd0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31c7c getaddrinfo+0x14c
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 1140d3558 [unknown] (/usr/bin/ping)
This patch solves this issue by doing a conditional skip. If there is a
gaih_inet function present in the libc then it will be added to the
expected backtrace else the function will be skipped from being added
to the expected backtrace.
Output with the patch
[root@xxx perf]# ./perf test -v "probe libc's inet_pton & backtrace it
with ping"
83: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 102662
ping 102692 [000] 127935.549973: probe_libc:inet_pton: (7fff93379a60)
7fff93379a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff9332a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11ef03534 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231126070914.175332-1-likhitha@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are issues as reported that need some more investigation on the
RT kernel front, till that is addressed, skip this test.
This test is already skipped for multiple hardware architectures where
the tested kernel feature is not supported.
Acked-by: Marco Elver <elver@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e368f2c848d77fbc8d259f44e2055fe469c219cf.camel@gmx.de/
Link: https://lore.kernel.org/r/20231129154718.326330-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the part that loads the BTF info to a "btf__available()" that will
lazy load the BTF info so that if we need it for some other test, which
we will in the following cset, we can reuse it.
At some point this will move from this specific 'perf test' entry to be
used in other parts of perf, do it when needed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231129154718.326330-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely")
changed the meaning of MAX_ORDER from exclusive to inclusive. So, we
can allocate compound pages with up to 1 << MAX_ORDER pages.
Reflect this change in dm-flakey and start trying to allocate compound
pages with MAX_ORDER.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231124092121.16866-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add the first version of the VM_BIND locking document which is
intended to be part of the xe driver upstreaming agreement.
The document describes and discuss the locking used during exec-
functions, evicton and for userptr gpu-vmas. Intention is to be using the
same nomenclature as the drm-vm-bind-async.rst.
v2:
- s/gvm/gpu_vm/g (Rodrigo Vivi)
- Clarify the userptr seqlock with a pointer to mm/mmu_notifier.c
(Rodrigo Vivi)
- Adjust commit message accordingly.
- Add SPDX license header.
v3:
- Large update to align with the drm_gpuvm manager locking
- Add "Efficient userptr gpu_vma exec function iteration" section
- Add "Locking at bind- and unbind time" section.
v4:
- Fix tabs vs space errors by untabifying (Rodrigo Vivi)
- Minor style fixes and typos (Rodrigo Vivi)
- Clarify situations where stale GPU mappings are occurring and how
access through these mappings are blocked. (Rodrigo Vivi)
- Insert into the toctree in implementation_guidelines.rst
v5:
- Add a section about recoverable page-faults.
- Use local references to other documentation where possible
(Bagas Sanjaya)
- General documentation fixes and typos (Danilo Krummrich and
Boris Brezillon)
- Improve the documentation around locks that need to be grabbed from the
dm-fence critical section (Boris Brezillon)
- Add more references to the DRM GPUVM helpers (Danilo Krummrich and
Boriz Brezillon)
- Update the rfc/xe.rst document.
v6:
- Rework wording to improve readability (Boris Brezillon, Rodrigo Vivi,
Bagas Sanjaya)
- Various minor fixes across the document (Boris Brezillon)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: John Hubbard <jhubbard@nvidia.com> # Documentation/core-api/pin_user_pages.rst changes
Link: https://patchwork.freedesktop.org/patch/msgid/20231129090637.2629-1-thomas.hellstrom@linux.intel.com
WAs 14011508470, 14011503030 were applied on IP versions beyond which
they are applicable. Fixed the IP version checks for these workarounds.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128102451.825242-1-balasubramani.vivekanandan@intel.com
Currently the Qualcomm Soundwire controller in its DAI startup op
allocates the Soundwire stream runtime. This works fine for existing
designs, but has limitations for stream runtimes with multiple
controllers, like upcoming Qualcomm X1E80100 SoC with four WSA8840
speakers on two Soundwire controllers.
When two Soundwire controllers are added to sound card codecs, Soundwire
startup() is called twice, one for each Soundwire controller, and second
execution overwrites what was set before. During shutdown() this causes
double free.
It is expected to have only one Soundwire stream runtime, thus it should
be allocated from SoC soundcard context startup(), not from each
Soundwire startup(). Such way will properly handle both cases: one and
two Soundwire controllers in the stream runtime.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231128165638.757665-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer Qualcomm SoC soundcards will need to allocate Soundwire stream
runtime in their startup op. The code will be exactly the same for all
soundcards, so add a helper for that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128165638.757665-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When querying whether or not a vCPU "is" running in kernel mode, directly
get the CPL if the vCPU is the currently loaded vCPU. In scenarios where
a guest is profiled via perf-kvm, querying vcpu->arch.preempted_in_kernel
from kvm_guest_state() is wrong if vCPU is actively running, i.e. isn't
scheduled out due to being preempted and so preempted_in_kernel is stale.
This affects perf/core's ability to accurately tag guest RIP with
PERF_RECORD_MISC_GUEST_{KERNEL|USER} and record it in the sample. This
causes perf/tool to fail to connect the vCPU RIPs to the guest kernel
space symbols when parsing these samples due to incorrect PERF_RECORD_MISC
flags:
Before (perf-report of a cpu-cycles sample):
1.23% :58945 [unknown] [u] 0xffffffff818012e0
After:
1.35% :60703 [kernel.vmlinux] [g] asm_exc_page_fault
Note, checking preempted_in_kernel in kvm_arch_vcpu_in_kernel() is awful
as nothing in the API's suggests that it's safe to use if and only if the
vCPU was preempted. That can be cleaned up in the future, for now just
fix the glaring correctness bug.
Note #2, checking vcpu->preempted is NOT safe, as getting the CPL on VMX
requires VMREAD, i.e. is correct if and only if the vCPU is loaded. If
the target vCPU *was* preempted, then it can be scheduled back in after
the check on vcpu->preempted in kvm_vcpu_on_spin(), i.e. KVM could end up
trying to do VMREAD on a VMCS that isn't loaded on the current pCPU.
Signed-off-by: Like Xu <likexu@tencent.com>
Fixes: e1bfc24577 ("KVM: Move x86's perf guest info callbacks to generic KVM")
Link: https://lore.kernel.org/r/20231123075818.12521-1-likexu@tencent.com
[sean: massage changelong, add Fixes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
dm_verity_fec_io is placed after the end of two hash digests. If the hash
digest has unaligned length, struct dm_verity_fec_io could be unaligned.
This commit fixes the placement of struct dm_verity_fec_io, so that it's
aligned.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
We found an issue under Android OTA scenario that many BIOs have to do
FEC where the data under dm-verity is 100% complete and no corruption.
Android OTA has many dm-block layers, from upper to lower:
dm-verity
dm-snapshot
dm-origin & dm-cow
dm-linear
ufs
DM tables have to change 2 times during Android OTA merging process.
When doing table change, the dm-snapshot will be suspended for a while.
During this interval, many readahead IOs are submitted to dm_verity
from filesystem. Then the kverity works are busy doing FEC process
which cost too much time to finish dm-verity IO. This causes needless
delay which feels like system is hung.
After adding debugging it was found that each readahead IO needed
around 10s to finish when this situation occurred. This is due to IO
amplification:
dm-snapshot suspend
erofs_readahead // 300+ io is submitted
dm_submit_bio (dm_verity)
dm_submit_bio (dm_snapshot)
bio return EIO
bio got nothing, it's empty
verity_end_io
verity_verify_io
forloop range(0, io->n_blocks) // each io->nblocks ~= 20
verity_fec_decode
fec_decode_rsb
fec_read_bufs
forloop range(0, v->fec->rsn) // v->fec->rsn = 253
new_read
submit_bio (dm_snapshot)
end loop
end loop
dm-snapshot resume
Readahead BIOs get nothing while dm-snapshot is suspended, so all of
them will cause verity's FEC.
Each readahead BIO needs to verify ~20 (io->nblocks) blocks.
Each block needs to do FEC, and every block needs to do 253
(v->fec->rsn) reads.
So during the suspend interval(~200ms), 300 readahead BIOs trigger
~1518000 (300*20*253) IOs to dm-snapshot.
As readahead IO is not required by userspace, and to fix this issue,
it is best to pass readahead errors to upper layer to handle it.
Cc: stable@vger.kernel.org
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Current, the dewake_scanline variable is defined as unsigned int,
an unsigned int variable that is always greater than or equal to 0.
when _intel_dsb_commit function is called by intel_dsb_commit function,
the dewake_scanline variable may have an int value.
So the dewake_scanline variable is necessary to defined as an int.
Fixes: f83b94d237 ("drm/i915/dsb: Use DEwake to combat PkgC latency")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310052201.AnVbpgPr-lkp@intel.com/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: heminhong <heminhong@kylinos.cn>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114024341.14524-1-heminhong@kylinos.cn
It is nontrivial to derive the role of the two attribute groups in source
file block/blk-sysfs.c. Hence add a comment that explains their roles. See
also commit 6d85ebf95c ("blk-sysfs: add a new attr_group for blk_mq").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231128194019.72762-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct ynl_req_state carries reply-related info from generated code
into generic YNL code. While we don't need reply info to execute
a request without a reply, we still need to pass in the struct, because
it's also where we get the pointer to struct ynl_sock from. Passing NULL
results in crashes if kernel returns an error or an unexpected reply.
Fixes: dc0956c98f ("tools: ynl-gen: move the response reading logic into YNL")
Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default dump handler needs to clear ret before returning.
Otherwise if the last interface returns an inconsequential
error this error will propagate to user space.
This may confuse user space (ethtool CLI seems to ignore it,
but YNL doesn't). It will also terminate the dump early
for mutli-skb dump, because netlink core treats EOPNOTSUPP
as a real error.
Fixes: 728480f124 ("ethtool: default handlers for GET requests")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When amd_pstate is running, writing to scaling_min_freq and
scaling_max_freq has no effect. These values are only passed to the
policy level, but not to the platform level. This means that the
platform does not know about the frequency limits set by the user.
To fix this, update the min_perf and max_perf values at the platform
level whenever the user changes the scaling_min_freq and scaling_max_freq
values.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Oleksij Rempel says:
====================
Fine-Tune Flow Control and Speed Configurations in Microchip KSZ8xxx DSA Driver
This patch set focuses on enhancing the configurability of flow
control, speed, and duplex settings in the Microchip KSZ8xxx DSA driver.
The first patch allows more granular control over the CPU port's flow
control, speed, and duplex settings. The second patch introduces a
method for port configurations for port with integrated PHYs, primarily
concerning flow control based on duplex mode.
====================
Link: https://lore.kernel.org/r/20231127145101.3039399-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Last part of the driver do now support phylink_mac_link_up(). So, make it
not optional.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231127145101.3039399-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces the function 'ksz8_phy_port_link_up' to the
Microchip KSZ8xxx driver. This function is responsible for setting up
flow control and duplex settings for the ports that are integrated with
PHYs.
The KSZ8795 switch supports asymmetric pause control, which can't be
fully utilized since a single bit controls both RX and TX pause. Despite
this, the flow control can be adjusted based on the auto-negotiation
process, taking into account the capabilities of both link partners.
On the other hand, the KSZ8873's PORT_FORCE_FLOW_CTRL bit can be set by
the hardware bootstrap, which ignores the auto-negotiation result.
Therefore, even in auto-negotiation mode, we need to ensure that this
bit is correctly set.
When auto-negotiation isn't in use, we enforce symmetric pause control
for the KSZ8795 switch.
Please note, forcing flow control disable on a port while still
advertising pause support isn't possible. While this scenario
might not be practical or desired, it's important to be aware of this
limitation when working with the KSZ8873 and similar devices.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231127145101.3039399-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow flow control, speed, and duplex settings on the CPU port to be
configurable. Previously, the speed and duplex relied on default switch
values, which limited flexibility. Additionally, flow control was
hardcoded and only functional in duplex mode. This update enhances the
configurability of these parameters.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231127145101.3039399-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
John Fraker says:
====================
gve: Add support for non-4k page sizes.
This patch series adds support for non-4k page sizes to the driver. Prior
to this patch series, the driver assumes a 4k page size in many small
ways, and will crash in a kernel compiled for a different page size.
This changeset aims to be a minimal changeset that unblocks certain arm
platforms with large page sizes.
====================
Link: https://lore.kernel.org/r/20231128002648.320892-1-jfraker@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to this change, gve crashes when attempting to run in kernels with
page sizes other than 4k. This change removes unnecessary references to
PAGE_SIZE and replaces them with more meaningful constants.
Signed-off-by: Jordan Kimbrough <jrkim@google.com>
Signed-off-by: John Fraker <jfraker@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231128002648.320892-6-jfraker@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This register is required on platforms with page sizes greater than 4k.
This is because the tx side of the driver vmaps the entire queue page
list of pages into a single flat address space, then uses the entire
space. Without communicating the guest page size to the backend, the
backend will only access the first 4k of each page in the queue page list.
Signed-off-by: Jordan Kimbrough <jrkim@google.com>
Signed-off-by: John Fraker <jfraker@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231128002648.320892-5-jfraker@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These checks are safe to remove as they are no longer enforced by the
backend. Retaining them would require updating them to work differently
with page sizes larger than 4k.
Signed-off-by: Jordan Kimbrough <jrkim@google.com>
Signed-off-by: John Fraker <jfraker@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231128002648.320892-4-jfraker@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
adminq_pfn assumes a page size of 4k, causing this mechanism to break in
kernels compiled with different page sizes. A new PCI device revision was
needed for the device to be able to communicate with the driver how to
set up the admin queue prior to having access to the admin queue.
Signed-off-by: Jordan Kimbrough <jrkim@google.com>
Signed-off-by: John Fraker <jfraker@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231128002648.320892-3-jfraker@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
