Create new helpers {sb,file}_write_not_started() that can be used
to assert that sb_start_write() is not held.
This is needed for fanotify "pre content" events.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-17-amir73il@gmail.com
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convenience wrapper for sb_write_started(file_inode(inode)->i_sb)), which
has a single occurrence in the code right now.
Document the false negatives of those helpers, which makes them unusable
to assert that sb_start_write() is not held.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-16-amir73il@gmail.com
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Similar to sb_write_started() for use by other sb freeze levels.
Unlike the boolean sb_write_started(), this helper returns a tristate
to distiguish the cases of lockdep disabled or unknown lock state.
This is needed for fanotify "pre content" events.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-15-amir73il@gmail.com
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In vfs code, sb_start_write() is usually called after the permission hook
in rw_verify_area(). vfs_iocb_iter_write() is an exception to this rule,
where kiocb_start_write() is called by its callers.
Move kiocb_start_write() from the callers into vfs_iocb_iter_write()
after the rw_verify_area() checks, to make them "start-write-safe".
The semantics of vfs_iocb_iter_write() is changed, so that the caller is
responsible for calling kiocb_end_write() on completion only if async
iocb was queued. The completion handlers of both callers were adapted
to this semantic change.
This is needed for fanotify "pre content" events.
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-14-amir73il@gmail.com
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We recently moved fsnotify hook, rw_verify_area() and other checks from
do_iter_write() out to its two callers.
for consistency, do the same thing for do_iter_read() - move the
rw_verify_area() checks and fsnotify hook to the callers vfs_iter_read()
and vfs_readv().
This aligns those vfs helpers with the pattern used in vfs_read() and
vfs_iocb_iter_read() and the vfs write helpers, where all the checks are
in the vfs helpers and the do_* or call_* helpers do the work.
This is needed for fanotify "pre content" events.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-13-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In many of the vfs helpers, the rw_verity_area() checks are called before
taking sb_start_write(), making them "start-write-safe".
do_iter_write() is an exception to this rule.
do_iter_write() has two callers - vfs_iter_write() and vfs_writev().
Move rw_verify_area() and other checks from do_iter_write() out to
its callers to make them "start-write-safe".
Move also the fsnotify_modify() hook to align with similar pattern
used in vfs_write() and other vfs helpers.
This is needed for fanotify "pre content" events.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-12-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All the callers of vfs_iter_write() call file_start_write() just before
calling vfs_iter_write() except for target_core_file's fd_do_rw().
Move file_start_write() from the callers into vfs_iter_write().
fd_do_rw() calls vfs_iter_write() with a non-regular file, so
file_start_write() is a no-op.
This is needed for fanotify "pre content" events.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-11-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Unified DMA (UDMA) module on K3 SoCs have TX and RX channel cfg and RX
flow cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-5-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Packet DMA (PKTDMA) module on K3 SoCs have ring cfg, TX and RX channel
cfg and RX flow cfg register regions which are usually configured by a
Device Management firmware. But certain entities such as bootloader
(like U-Boot) may have to access them directly. Describe this region in
the binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
four regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-4-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Block copy DMA(BCDMA)module on K3 SoCs have ring, BCHAN, TX and RX
channel cfg register regions which are usually configured by a Device
Management firmware. But certain entities such as bootloader (like
U-Boot) may have to access them directly. Describe this region in the
binding documentation for completeness of module description.
Keep the binding compatible with existing DTS files by requiring first
five regions to be present at least.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-3-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for introducing more register regions, add description
for existing register regions so that its easier to map reg-names to
that of SoC Documentations/TRMs.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231124045722.191817-2-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The coda host file is a backing file for the coda inode on a different
filesystem than the coda inode.
Change the locking order to take the coda inode lock before taking
the backing host file freeze protection, same as in ovl_write_iter()
and in network filesystems that use cachefiles.
Link: https://lore.kernel.org/r/CAOQ4uxjcnwuF1gMxe64WLODGA_MyAy8x-DtqkCUxqVQKk3Xbng@mail.gmail.com/
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-10-amir73il@gmail.com
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In vfs code, file_start_write() is usually called after the permission
hook in rw_verify_area(). btrfs_ioctl_encoded_write() in an exception
to this rule.
Move file_start_write() to after the rw_verify_area() check in encoded
write to make the permission hook "start-write-safe".
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-9-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In vfs code, file_start_write() is usually called after the permission
hook in rw_verify_area(). vfs_dedupe_file_range_one() is an exception
to this rule.
In vfs_dedupe_file_range_one(), move file_start_write() to after the
the rw_verify_area() checks to make them "start-write-safe".
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-8-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In many of the vfs helpers, file permission hook is called before
taking sb_start_write(), making them "start-write-safe".
do_clone_file_range() is an exception to this rule.
do_clone_file_range() has two callers - vfs_clone_file_range() and
overlayfs. Move remap_verify_area() checks from do_clone_file_range()
out to vfs_clone_file_range() to make them "start-write-safe".
Overlayfs already has calls to rw_verify_area() with the same security
permission hooks as remap_verify_area() has.
The rest of the checks in remap_verify_area() are irrelevant for
overlayfs that calls do_clone_file_range() offset 0 and positive length.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-7-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All the callers of ->splice_write(), (e.g. do_splice_direct() and
do_splice()) already check rw_verify_area() for the entire range
and perform all the other checks that are in vfs_write_iter().
Instead of creating another tiny helper for special caller, just
open-code it.
This is needed for fanotify "pre content" events.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-6-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
vfs_splice_read() has a permission hook inside rw_verify_area() and
it is called from splice_file_to_pipe(), which is called from
do_splice() and do_sendfile().
do_sendfile() already has a rw_verify_area() check for the entire range.
do_splice() has a rw_verify_check() for the splice to file case, not for
the splice from file case.
Add the rw_verify_area() check for splice from file case in do_splice()
and use a variant of vfs_splice_read() without rw_verify_area() check
in splice_file_to_pipe() to avoid the redundant rw_verify_area() checks.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-5-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
vfs_splice_read() has a permission hook inside rw_verify_area() and
it is called from do_splice_direct() -> splice_direct_to_actor().
The callers of do_splice_direct() (e.g. vfs_copy_file_range()) already
call rw_verify_area() for the entire range, but the other caller of
splice_direct_to_actor() (nfsd) does not.
Add the rw_verify_area() checks in nfsd_splice_read() and use a
variant of vfs_splice_read() without rw_verify_area() check in
splice_direct_to_actor() to avoid the redundant rw_verify_area() checks.
This is needed for fanotify "pre content" events.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-4-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
All callers of do_splice_direct() have a call to rw_verify_area() for
the entire range that is being copied, e.g. by vfs_copy_file_range() or
do_sendfile() before calling do_splice_direct().
The rw_verify_area() check inside do_splice_direct() is redundant and
is called after sb_start_write(), so it is not "start-write-safe".
Remove this redundant check.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-3-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The main callers of do_splice_direct() also call rw_verify_area() for
the entire range that is being copied, e.g. by vfs_copy_file_range()
or do_sendfile() before calling do_splice_direct().
The only caller that does not have those checks for entire range is
ovl_copy_up_file(). In preparation for removing the checks inside
do_splice_direct(), add rw_verify_area() call in ovl_copy_up_file().
For extra safety, perform minimal sanity checks from rw_verify_area()
for non negative offsets also in the copy up do_splice_direct() loop
without calling the file permission hooks.
This is needed for fanotify "pre content" events.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231122122715.2561213-2-amir73il@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The callers of vfs_iter_write() are required to hold file_start_write().
file_start_write() is a no-op for the S_ISBLK() case, but it is really
needed when the backing file is a regular file.
We are going to move file_{start,end}_write() into vfs_iter_write(), but
we need to fix this first, so that the fix could be backported to stable
kernels.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/ZV8ETIpM+wZa33B5@infradead.org/
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231123092000.2665902-1-amir73il@gmail.com
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When allocating from devices with different durability, we might end up
with more replicas than required; this changes
bch2_alloc_sectors_start() to check for this, and drop replicas that
aren't needed to hit the number of replicas requested.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree iterator code overlays keys from the journal until journal
replay is finished; since we're now starting copygc/rebalance etc.
before replay is finished, this is multithreaded access and thus needs
refcounting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
ExynosAutov9 pin controller capable of wake-ups is still compatible with
Exynos7, however it does not mux interrupts. Add Exynos7 compatible
fallback to annotate that compatibility and match the bindings.
Link: https://lore.kernel.org/r/20231122200407.423264-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Various userspace scripts/tools may expect mount entries in
/proc/mounts to reflect the device path names used to mount the
associated filesystem. bcachefs seems to normalize the device path
to the underlying device name based on the block device. This
confuses tools like fstests when the test devices might be lvm or
device-mapper based.
The default behavior for show_vfsmnt() appers to be to use the
string passed to alloc_vfsmnt(), so tweak bcachefs to copy the path
at device superblock read time and to display it via
->show_devname().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Exynos850 pin controller capable of wake-ups is still compatible with
Exynos7, however it does not mux interrupts. Add Exynos7 compatible
fallback to annotate that compatibility and match the bindings.
Link: https://lore.kernel.org/r/20231122200407.423264-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Older ARM8 SoCs like Exynos5433, Exynos7 and Exynos7885 have the pin
controller with wake-up interrupts muxed, thus the wake-up interrupt
controller device node has interrupts property, while its pin banks
might not (because they are muxed by the wake-up controller).
Newer SoCs like Exynos850 and ExynosAutov9 do not used muxed wake-up
interrupts:
1. Wake-up interrupt controller device node has no interrupts,
2. Its pin banks have interrupts (since there is no muxing).
Their programming interface is however still compatible with Exynos7,
thus change the bindings to express this: retain compatibility with
Exynos7 and add new compatibility fallback of Exynos850 in newer
designs.
No driver changes are needed. This is necessary only to properly
describe DTS.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231122200407.423264-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This fixes a bug where copygc would occasionally race with going
read-write and die, thinking we were read only, because it couldn't take
a ref on c->writes.
It's not necessary for copygc (or rebalance, or copygc) to take write
refs; they could run with BCH_TRANS_COMMIT_nocheck_rw, but this is an
easier fix that making sure that flag is passed correctly everywhere.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
copygc no longer has to scan the buckets, so it's no longer a problem if
the number of buckets is changing while it's running.
This also fixes a bug where we forgot to restart copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds move_ctxt_wait_event_timeout(), which can sleep for a timeout
while also issueing pending moves as reads complete.
Co-developed-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Introduce a new helper to flush all move IOs, and use it in a few places
where we should have been.
The new helper also drops btree locks before waiting on outstanding move
writes, avoiding potential deadlocks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Qualcomm Soundwire Controllers IP version after 1.3 have a dedicated
master id register which will provide a unique id value for each
controller instance. Use this value instead of artificially generated
value from idr. Versions 1.3 and below only have one instance of
soundwire controller which does no have this register, so let them use
value from idr.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231123105332.102167-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If same devices with same device IDs are present on different soundwire
buses, the probe fails due to conflicting device names and sysfs
entries:
sysfs: cannot create duplicate filename '/bus/soundwire/devices/sdw:0:0217:0204:00:0'
The link ID is 0 for both devices, so they should be differentiated by
the controller ID. Add the controller ID so, the device names and sysfs entries look
like:
sdw:1:0:0217:0204:00:0 -> ../../../devices/platform/soc@0/6ab0000.soundwire-controller/sdw-master-1-0/sdw:1:0:0217:0204:00:0
sdw:3:0:0217:0204:00:0 -> ../../../devices/platform/soc@0/6b10000.soundwire-controller/sdw-master-3-0/sdw:3:0:0217:0204:00:0
[PLB changes: use bus->controller_id instead of bus->id]
Fixes: 7c3cd189b8 ("soundwire: Add Master registration")
Cc: stable@vger.kernel.org
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing SoundWire support misses a clear Controller/Manager
hiearchical definition to deal with all variants across SOC vendors.
a) Intel platforms have one controller with 4 or more Managers.
b) AMD platforms have two controllers with one Manager each, but due
to BIOS issues use two different link_id values within the scope of a
single controller.
c) QCOM platforms have one or more controller with one Manager each.
This patch adds a 'controller_id' which can be set by higher
levels. If assigned to -1, the controller_id will be set to the
system-unique IDA-assigned bus->id.
The main change is that the bus->id is no longer used for any device
name, which makes the definition completely predictable and not
dependent on any enumeration order. The bus->id is only used to insert
the Managers in the stream rt context.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/stable/20231017160933.12624-2-pierre-louis.bossart%40linux.intel.com
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We still have disk space accounting changes coming for erasure coding,
and the changes won't be as strictly backwards compatible as they'd
ought to be - specifically, we need to start accounting striped data
under a separate counter in bch_alloc (which describes buckets).
A fsck will suffice for upgrading/downgrading, but since erasure coding
is the most incomplete major feature of bcachefs it still makes sense to
put behind a separate kconfig option, so that users are fully aware.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Control flow integrity is now checking that type signatures match on
indirect function calls. That breaks closures, which embed a work_struct
in a closure in such a way that a closure_fn may also be used as a
workqueue fn by the underlying closure code.
So we have to change closure fns to take a work_struct as their
argument - but that results in a loss of clarity, as closure fns have
different semantics from normal workqueue functions (they run owning a
ref on the closure, which must be released with continue_at() or
closure_return()).
Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros
as suggested by Kees, to smooth things over a bit.
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
ksmbd set ->op_state as OPLOCK_STATE_NONE on lease break ack error.
op_state of lease should not be updated because client can send lease
break ack again. This patch fix smb2.lease.breaking2 test failure.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Directly set SMB2_FLAGS_ASYNC_COMMAND flags and AsyncId in smb2 header of
interim response instead of current response header.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add missing release async id and delete interim response entry after
sending status pending response. This only cause when smb2 lease is enable.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd should process secound parallel smb2 create request during waiting
oplock break ack. parent lock range that is too large in smb2_open() causes
smb2_open() to be serialized. Move the oplock handling to the bottom of
smb2_open() and make it called after parent unlock. This fixes the failure
of smb2.lease.breaking1 testcase.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
xfstests generic/002 test fail when enabling smb2 leases feature.
This test create hard link file, but removeal failed.
ci has a file open count to count file open through the smb client,
but in the case of hard link files, The allocation of ci per inode
cause incorrectly open count for file deletion. This patch allocate
ci per dentry to counts open counts for hard link.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When allocated memory for 'new' failed,just return
will cause memory leak of 'ar'.
Fixes: 1819a90429 ("ksmbd: reorganize ksmbd_iov_pin_rsp()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311031837.H3yo7JVl-lkp@intel.com/
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Before returning the rswitch_start_xmit() in the error path,
dev_kfree_skb_any() should be called. So, fix it.
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This .ndo_start_xmit() function should return netdev_tx_t value,
not -ENOMEM. So, fix it.
Fixes: 33f5d733b5 ("net: renesas: rswitch: Improve TX timestamp accuracy")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
