The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-18-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-17-u.kleine-koenig@pengutronix.de
If the offset equals the bv_len of the first registered bvec, then the
request does not include any of that first bvec. Skip it so that drivers
don't have to deal with a zero length bvec, which was observed to break
NVMe's PRP list creation.
Cc: stable@vger.kernel.org
Fixes: bd11b3a391 ("io_uring: don't use iov_iter_advance() for fixed buffers")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231120221831.2646460-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By running a Van Gogh device (Steam Deck), the following message
was noticed in the kernel log:
pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci
Effectively this means the quirk executed but changed nothing, since the
class of this device was already the proper one (likely adjusted by newer
firmware versions).
Check and perform the override only if necessary.
Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Vicki Pfau <vi@endrift.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231004131254.2673842-16-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231004131254.2673842-15-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231004131254.2673842-14-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231004131254.2673842-13-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
pci_host_common_remove() returned zero unconditionally. With that converted
to return void instead, the generic pci host driver can be switched to
.remove_new() trivially.
Link: https://lore.kernel.org/r/20231020092107.2148311-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-12-u.kleine-koenig@pengutronix.de
While lockdown has been present in the kernel for a while, it is
missing a MAINTAINERS entry for some reason.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-11-u.kleine-koenig@pengutronix.de
Add the reserve-memory nodes used by DSP when the rpmsg
feature is enabled.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20231013152731.23471-3-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20231004131254.2673842-10-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20231004131254.2673842-9-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-8-u.kleine-koenig@pengutronix.de
Add the .find_loaded_rsc_table operation for i.MX DSP.
We need it for inter-process communication between DSP
and main core.
This callback is used to find the resource table (defined
in remote processor linker script) where the address of the
vrings along with the other allocated resources (carveouts etc)
are stored.
If this is not found, the vrings are not allocated and
the IPC between cores will not work.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20231013152731.23471-2-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-7-u.kleine-koenig@pengutronix.de
Reduce verboseness of test_progs' output in reg_bounds set of tests with
two changes.
First, instead of each different operator (<, <=, >, ...) being it's own
subtest, combine all different ops for the same (x, y, init_t, cond_t)
values into single subtest. Instead of getting 6 subtests, we get one
generic one, e.g.:
#192/53 reg_bounds_crafted/(s64)[0xffffffffffffffff; 0] (s64)<op> 0xffffffff00000000:OK
Second, for random generated test cases, treat all of them as a single
test to eliminate very verbose output with random values in them. So now
we'll just get one line per each combination of (init_t, cond_t),
instead of 6 x 25 = 150 subtests before this change:
#225 reg_bounds_rand_consts_s32_s32:OK
Given we reduce verboseness so much, it makes sense to do a bit more
random testing, so we also bump default number of random tests to 100,
up from 25. This doesn't increase runtime significantly, especially in
parallelized mode.
With all the above changes we still make sure that we have all the
information necessary for reproducing test case if it happens to fail.
That includes reporting random seed and specific operator that is
failing. Those will only be printed to console if related test/subtest
fails, so it doesn't have any added verboseness implications.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231120180452.145849-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-6-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-5-u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-4-u.kleine-koenig@pengutronix.de
Before performing a map, let's check whether the vLPI has been
mapped.
Fixes: 196b136498 ("KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypass")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231120131210.2039-1-jiangkunkun@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-3-u.kleine-koenig@pengutronix.de
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path.
Cc: <stable@vger.kernel.org>
Fixes: 4fa52aa7a8 ("[S390] dasd: add enhanced DASD statistics interface")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231004131254.2673842-2-u.kleine-koenig@pengutronix.de
Daniel Borkmann says:
====================
This fixes bpf_redirect_peer stats accounting for veth and netkit,
and adds tstats in the first place for the latter. Utilise indirect
call wrapper for bpf_redirect_peer, and improve test coverage of the
latter also for netkit devices. Details in the patches, thanks!
The series was targeted at bpf originally, and is done here as well,
so it can trigger BPF CI. Jakub, if you think directly going via net
is better since the majority of the diff touches net anyway, that is
fine, too.
Thanks!
v2 -> v3:
- Add kdoc for pcpu_stat_type (Simon)
- Reject invalid type value in netdev_do_alloc_pcpu_stats (Simon)
- Add Reviewed-by tags from list
v1 -> v2:
- Move stats allocation/freeing into net core (Jakub)
- As prepwork for the above, move vrf's dstats over into the core
- Add a check into stats alloc to enforce tstats upon
implementing ndo_get_peer_dev
- Add Acked-by tags from list
Daniel Borkmann (6):
net, vrf: Move dstats structure to core
net: Move {l,t,d}stats allocation to core and convert veth & vrf
netkit: Add tstats per-CPU traffic counters
bpf, netkit: Add indirect call wrapper for fetching peer dev
selftests/bpf: De-veth-ize the tc_redirect test case
selftests/bpf: Add netkit to tc_redirect selftest
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the existing tc_redirect selftest to also cover netkit devices
for exercising the bpf_redirect_peer() code paths, so that we have both
veth as well as netkit covered, all tests still pass after this change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-9-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
No functional changes to the test case, but just renaming various functions,
variables, etc, to remove veth part of their name for making it more generic
and reusable later on (e.g. for netkit).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-8-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
ndo_get_peer_dev is used in tcx BPF fast path, therefore make use of
indirect call wrapper and therefore optimize the bpf_redirect_peer()
internal handling a bit. Add a small skb_get_peer_dev() wrapper which
utilizes the INDIRECT_CALL_1() macro instead of open coding.
Future work could potentially add a peer pointer directly into struct
net_device in future and convert veth and netkit over to use it so
that eventually ndo_get_peer_dev can be removed.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231114004220.6495-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium)
is not accounted for in the RX stats of supported devices (that is, veth
and netkit), confusing user space metrics collectors such as cAdvisor [0],
as reported by Youlun.
Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update
RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the
@tstats per-CPU counters (instead of @lstats, or @dstats).
To make this more fool-proof, error out when ndo_get_peer_dev is set but
@tstats are not selected.
[0] Specifically, the "container_network_receive_{byte,packet}s_total"
counters are affected.
Fixes: 9aa1206e8f ("bpf: Add redirect_peer helper")
Reported-by: Youlun Zhang <zhangyoulun@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently veth devices use the lstats per-CPU traffic counters, which only
cover TX traffic. veth_get_stats64() actually populates RX stats of a veth
device from its peer's TX counters, based on the assumption that a veth
device can _only_ receive packets from its peer, which is no longer true:
For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF
helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in
a different netns), skipping veth's peer device. Unfortunately, this kind
of traffic isn't currently accounted for in veth's RX stats.
In preparation for the fix, use tstats (instead of lstats) to maintain
both RX and TX counters for each veth device. We'll use RX counters for
bpf_redirect_peer() traffic, and keep using TX counters for the usual
"peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by
_adding_ RX count to peer's TX count, in order to cover both kinds of
traffic.
veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()")
for less confusion, but let's leave it to another patch to keep the fix
minimal.
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add dev->tstats traffic accounting to netkit. The latter contains per-CPU
RX and TX counters.
The dev's TX counters are bumped upon pass/unspec as well as redirect
verdicts, in other words, on everything except for drops.
The dev's RX counters are bumped upon successful __netif_rx(), as well
as from skb_do_redirect() (not part of this commit here).
Using dev->lstats with having just a single packets/bytes counter and
inferring one another's RX counters from the peer dev's lstats is not
possible given skb_do_redirect() can also bump the device's stats.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move {l,t,d}stats allocation to the core and let netdevs pick the stats
type they need. That way the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc) - all happening in the core.
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Just move struct pcpu_dstats out of the vrf into the core, and streamline
the field names slightly, so they better align with the {t,l}stats ones.
No functional change otherwise. A conversion of the u64s to u64_stats_t
could be done at a separate point in future. This move is needed as we are
moving the {t,l,d}stats allocation/freeing to the core.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Merge series from David Lechner <dlechner@baylibre.com>:
We are working towards adding support for the offload feature[1] of the
AXI SPI Engine IP core. Before we can do that, we want to make some
general fixes and improvements to the driver. In order to avoid a giant
series with 35+ patches, we are splitting this up into a few smaller
series.
This first series mostly doing some housekeeping:
* Convert device tree bindings to yaml.
* Add a MAINTAINERS entry.
* Clean up probe and remove using devm.
* Separate message state from driver state.
* Add support for cs_off and variable word size.
Once this series is applied, we will follow up with a second series of
general improvements, and then finally a 3rd series that implements the
offload support. The offload support will also involve the IIO
subsystem (a new IIO driver will depend on the new SPI offload feature),
so I'm mentioning this now in case we want to do anything ahead of time
to prepare for that (e.g. putting all of these changes on a separate
branch).
[1]: https://wiki.analog.com/resources/fpga/peripherals/spi_engine/offload
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, null_queue_rq()
would return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE for the request,
which has been marked as MQ_RQ_IN_FLIGHT by blk_mq_start_request().
Then null_queue_rqs() put these requests in the rqlist, return back to
the block layer core, which would try to queue them individually again,
so the warning in blk_mq_start_request() triggered.
Fix it by splitting the null_queue_rq() into two parts: the first is the
preparation of request, the second is the handling of request. We put
the blk_mq_start_request() after the preparation part, which may fail
and return back to the block layer core.
The throttling also belongs to the preparation part, so move it before
blk_mq_start_request(). And change the return type of null_handle_cmd()
to void, since it always return BLK_STS_OK now.
Reported-by: <syzbot+fcc47ba2476570cbbeb0@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/all/0000000000000e6aac06098aee0c@google.com/
Fixes: d78bfa1346 ("block/null_blk: add queue_rqs() support")
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20231120032521.1012037-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The TLS handshake timeout work item should always be
initialized to avoid a crash when cancelling the workqueue.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Suggested-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The host and subsystem NQNs are passed in the connect command payload and
interpreted as nul-terminated strings. Ensure they actually are
nul-terminated before using them.
Fixes: a07b4970f4 "nvmet: add a generic NVMe target")
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
If the config option NVME_HOST_AUTH is not selected we should not
accept the corresponding fabrics options. This allows userspace
to detect if NVMe authentication has been enabled for the kernel.
Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: f50fff73d6 ("nvme: implement In-Band authentication")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
We only need to evaluate the 'tls' connect option if TLS is
enabled; otherwise we might be getting a link error.
Fixes: 706add1367 ("nvme: keyring: fix conditional compilation")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/202311140426.0eHrTXBr-lkp@intel.com/
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The function blk_set_runtime_active() is called only from
blk_post_runtime_resume(), so there is no need for that function to be
exported. Open-code this function directly in blk_post_runtime_resume()
and remove it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231120070611.33951-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:
sound/soc/codecs/nau8810.c:183:25: sparse: warning: incorrect type in assignment
sound/soc/codecs/nau8810.c:183:25: sparse: expected int
sound/soc/codecs/nau8810.c:183:25: sparse: got restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
sound/soc/codecs/nau8810.c:219:25: sparse: warning: cast to restricted __be16
This issue is not still actively checked by kernel test robot.
Actually, it is same with nau8822's sparse warnings issue.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231120084227.1766633-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Memory reordering may occur in nbd_genl_connect(), causing config_refs
to be set to 1 while nbd->config is still empty. Opening nbd at this
time will cause null-ptr-dereference.
T1 T2
nbd_open
nbd_get_config_unlocked
nbd_genl_connect
nbd_alloc_and_init_config
//memory reordered
refcount_set(&nbd->config_refs, 1) // 2
nbd->config
->null point
nbd->config = config // 1
Fix it by adding smp barrier to guarantee the execution sequence.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are no functional changes, just to make code cleaner and prepare
to fix null-ptr-dereference while accessing 'nbd->config'.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-3-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
