Export map_update_retriable() to make it usable for other map_test
cases. These cases may only need retry for specific errno, so add
a new callback parameter to let map_update_retriable() decide whether or
not the errno is retriable.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231101032455.3808547-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to is_branch_taken()-related refactorings, start preparing
reg_set_min_max() to handle more generic case of two non-const
registers. Start with renaming arguments to accommodate later addition
of second register as an input argument.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-17-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When updating per-cpu map in map_percpu_stats test, patch_map_thread()
only passes 4-bytes-sized value to bpf_map_update_elem(). The expected
size of the value is 8 * num_possible_cpus(), so fix it by passing a
value with enough-size for per-cpu map update.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231101032455.3808547-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Combine 32-bit and 64-bit is_branch_taken logic for SCALAR_VALUE
registers. It makes it easier to see parallels between two domains
(32-bit and 64-bit), and makes subsequent refactoring more
straightforward.
No functional changes.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-16-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make is_branch_taken() a single entry point for branch pruning decision
making, handling both pointer vs pointer, pointer vs scalar, and scalar
vs scalar cases in one place. This also nicely cleans up check_cond_jmp_op().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-15-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move is_branch_taken() slightly down. In subsequent patched we'll need
both flip_opcode() and is_pkt_ptr_branch_taken() for is_branch_taken(),
but instead of sprinkling forward declarations around, it makes more
sense to move is_branch_taken() lower below is_pkt_ptr_branch_taken(),
and also keep it closer to very tightly related reg_set_min_max(), as
they are two critical parts of the same SCALAR range tracking logic.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-14-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While still assuming that second register is a constant, generalize
is_branch_taken-related code to accept two registers instead of register
plus explicit constant value. This also, as a side effect, allows to
simplify check_cond_jmp_op() by unifying BPF_K case with BPF_X case, for
which we use a fake register to represent BPF_K's imm constant as
a register.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102033759.2541186-13-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Just taking mundane refactoring bits out into a separate patch. No
functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102033759.2541186-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When performing 32-bit conditional operation operating on lower 32 bits
of a full 64-bit register, register full value isn't changed. We just
potentially gain new knowledge about that register's lower 32 bits.
Unfortunately, __reg_combine_{32,64}_into_{64,32} logic that
reg_set_min_max() performs as a last step, can lose information in some
cases due to __mark_reg64_unbounded() and __reg_assign_32_into_64().
That's bad and completely unnecessary. Especially __reg_assign_32_into_64()
looks completely out of place here, because we are not performing
zero-extending subregister assignment during conditional jump.
So this patch replaced __reg_combine_* with just a normal
reg_bounds_sync() which will do a proper job of deriving u64/s64 bounds
from u32/s32, and vice versa (among all other combinations).
__reg_combine_64_into_32() is also used in one more place,
coerce_reg_to_size(), while handling 1- and 2-byte register loads.
Looking into this, it seems like besides marking subregister as
unbounded before performing reg_bounds_sync(), we were also performing
deduction of smin32/smax32 and umin32/umax32 bounds from respective
smin/smax and umin/umax bounds. It's now redundant as reg_bounds_sync()
performs all the same logic more generically (e.g., without unnecessary
assumption that upper 32 bits of full register should be zero).
Long story short, we remove __reg_combine_64_into_32() completely, and
coerce_reg_to_size() now only does resetting subreg to unbounded and then
performing reg_bounds_sync() to recover as much information as possible
from 64-bit umin/umax and smin/smax bounds, set explicitly in
coerce_reg_to_size() earlier.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102033759.2541186-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are cases (caught by subsequent reg_bounds tests in selftests/bpf)
where performing one round of __reg_deduce_bounds() doesn't propagate
all the information from, say, s32 to u32 bounds and than from newly
learned u32 bounds back to u64 and s64. So perform __reg_deduce_bounds()
twice to make sure such derivations are propagated fully after
reg_bounds_sync().
One such example is test `(s64)[0xffffffff00000001; 0] (u64)<
0xffffffff00000000` from selftest patch from this patch set. It demonstrates an
intricate dance of u64 -> s64 -> u64 -> u32 bounds adjustments, which requires
two rounds of __reg_deduce_bounds(). Here are corresponding refinement log from
selftest, showing evolution of knowledge.
REFINING (FALSE R1) (u64)SRC=[0xffffffff00000000; U64_MAX] (u64)DST_OLD=[0; U64_MAX] (u64)DST_NEW=[0xffffffff00000000; U64_MAX]
REFINING (FALSE R1) (u64)SRC=[0xffffffff00000000; U64_MAX] (s64)DST_OLD=[0xffffffff00000001; 0] (s64)DST_NEW=[0xffffffff00000001; -1]
REFINING (FALSE R1) (s64)SRC=[0xffffffff00000001; -1] (u64)DST_OLD=[0xffffffff00000000; U64_MAX] (u64)DST_NEW=[0xffffffff00000001; U64_MAX]
REFINING (FALSE R1) (u64)SRC=[0xffffffff00000001; U64_MAX] (u32)DST_OLD=[0; U32_MAX] (u32)DST_NEW=[1; U32_MAX]
R1 initially has smin/smax set to [0xffffffff00000001; -1], while umin/umax is
unknown. After (u64)< comparison, in FALSE branch we gain knowledge that
umin/umax is [0xffffffff00000000; U64_MAX]. That causes smin/smax to learn that
zero can't happen and upper bound is -1. Then smin/smax is adjusted from
umin/umax improving lower bound from 0xffffffff00000000 to 0xffffffff00000001.
And then eventually umin32/umax32 bounds are drived from umin/umax and become
[1; U32_MAX].
Selftest in the last patch is actually implementing a multi-round fixed-point
convergence logic, but so far all the tests are handled by two rounds of
reg_bounds_sync() on the verifier state, so we keep it simple for now.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few interesting cases in which we can tighten 64-bit bounds based
on newly learnt information about 32-bit bounds. E.g., when full u64/s64
registers are used in BPF program, and then eventually compared as
u32/s32. The latter comparison doesn't change the value of full
register, but it does impose new restrictions on possible lower 32 bits
of such full registers. And we can use that to derive additional full
register bounds information.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102033759.2541186-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a special case where we can derive valid s32 bounds from umin/umax
or smin/smax by stitching together negative s32 subrange and
non-negative s32 subrange. That requires upper 32 bits to form a [N, N+1]
range in u32 domain (taking into account wrap around, so 0xffffffff
to 0x00000000 is a valid [N, N+1] range in this sense). See code comment
for concrete examples.
Eduard Zingerman also provided an alternative explanation ([0]) for more
mathematically inclined readers:
Suppose:
. there are numbers a, b, c
. 2**31 <= b < 2**32
. 0 <= c < 2**31
. umin = 2**32 * a + b
. umax = 2**32 * (a + 1) + c
The number of values in the range represented by [umin; umax] is:
. N = umax - umin + 1 = 2**32 + c - b + 1
. min(N) = 2**32 + 0 - (2**32-1) + 1 = 2, with b = 2**32-1, c = 0
. max(N) = 2**32 + (2**31 - 1) - 2**31 + 1 = 2**32, with b = 2**31, c = 2**31-1
Hence [(s32)b; (s32)c] forms a valid range.
[0] https://lore.kernel.org/bpf/d7af631802f0cfae20df77fe70068702d24bbd31.camel@gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Comments in code try to explain the idea behind why this is correct.
Please check the code and comments.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All the logic that applies to u64 vs s64, equally applies for u32 vs s32
relationships (just taken in a smaller 32-bit numeric space). So do the
same deduction of smin32/smax32 from umin32/umax32, if we can.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add smin/smax derivation from appropriate umin/umax values. Previously the
logic was surprisingly asymmetric, trying to derive umin/umax from smin/smax
(if possible), but not trying to do the same in the other direction. A simple
addition to __reg64_deduce_bounds() fixes this.
Added also generic comment about u64/s64 ranges and their relationship.
Hopefully that helps readers to understand all the bounds deductions
a bit better.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since some malloc calls in bpf_iter may at times fail,
this patch adds the appropriate fail checks, and ensures that
any previously allocated resource is appropriately destroyed
before returning the function.
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/DB3PR10MB6835F0ECA792265FA41FC39BE8A3A@DB3PR10MB6835.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some compilers complain about get_pprint_mapv_size() not returning value
in some code paths. Fix with explicit return.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compiler complains about malloc(). We also don't need to dynamically
allocate anything, so make the life easier by using statically sized
buffer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231102033759.2541186-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, job flow control is implemented simply by limiting the number
of jobs in flight. Therefore, a scheduler is initialized with a credit
limit that corresponds to the number of jobs which can be sent to the
hardware.
This implies that for each job, drivers need to account for the maximum
job size possible in order to not overflow the ring buffer.
However, there are drivers, such as Nouveau, where the job size has a
rather large range. For such drivers it can easily happen that job
submissions not even filling the ring by 1% can block subsequent
submissions, which, in the worst case, can lead to the ring run dry.
In order to overcome this issue, allow for tracking the actual job size
instead of the number of jobs. Therefore, add a field to track a job's
credit count, which represents the number of credits a job contributes
to the scheduler's credit limit.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110001638.71750-1-dakr@redhat.com
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp: fix usec timestamps with TCP fastopen
- tcp_sigpool: fix some off by one bugs
- tcp: fix possible out-of-bounds reads in tcp_hash_fail()
- tcp: fix SYN option room calculation for TCP-AO
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k6Wk
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
-----BEGIN PGP SIGNATURE-----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=ZfkT
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash and hides the Kconfig sub-options for
the jitter RNG"
* tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Set using_shash for cloned ahash wrapper over shash
crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT
Rename AUO 0x235c B116XTN02 to B116XTN02.3 according to decoding edid.
Fixes: 3db2420422 ("drm/panel-edp: Add AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0")
Cc: stable@vger.kernel.org
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-3-hsinyi@chromium.org
Rename AUO 0x405c B116XAK01 to B116XAK01.0 and adjust the timing of
auo_b116xak01: T3=200, T12=500, T7_max = 50 according to decoding edid
and datasheet.
Fixes: da458286a5 ("drm/panel: Add support for AUO B116XAK01 panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-2-hsinyi@chromium.org
Don't "wake up" the GPU scheduler unless the entity is ready, as well as we
can queue to the scheduler, i.e. there is no point in waking up the scheduler
for the entity unless the entity is ready.
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Fixes: bc8d6a9df9 ("drm/sched: Don't disturb the entity when in RR-mode scheduling")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110000123.72565-2-ltuikov89@gmail.com
A new helper is added for cgroup1 hierarchy:
- task_get_cgroup1
Acquires the associated cgroup of a task within a specific cgroup1
hierarchy. The cgroup1 hierarchy is identified by its hierarchy ID.
This helper function is added to facilitate the tracing of tasks within
a particular container or cgroup dir in BPF programs. It's important to
note that this helper is designed specifically for cgroup1 only.
tj: Use irsqsave/restore as suggested by Hou Tao <houtao@huaweicloud.com>.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When I initially examined the function current_cgns_cgroup_from_root(), I
was perplexed by its lack of holding cgroup_mutex. However, after Michal
explained the reason[0] to me, I realized that it already holds the
namespace_sem. I believe this intricacy could also confuse others, so it
would be advisable to include an annotation for clarification.
After we replace the cgroup_mutex with RCU read lock, if current doesn't
hold the namespace_sem, the root cgroup will be NULL. So let's add a
WARN_ON_ONCE() for it.
[0]. https://lore.kernel.org/bpf/afdnpo3jz2ic2ampud7swd6so5carkilts2mkygcaw67vbw6yh@5b5mncf7qyet
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Michal Koutny <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup root_list is already RCU-safe. Therefore, we can replace the
cgroup_mutex with the RCU read lock in some particular paths. This change
will be particularly beneficial for frequent operations, such as
`cat /proc/self/cgroup`, in a cgroup1-based container environment.
I did stress tests with this change, as outlined below
(with CONFIG_PROVE_RCU_LIST enabled):
- Continuously mounting and unmounting named cgroups in some tasks,
for example:
cgrp_name=$1
while true
do
mount -t cgroup -o none,name=$cgrp_name none /$cgrp_name
umount /$cgrp_name
done
- Continuously triggering proc_cgroup_show() in some tasks concurrently,
for example:
while true; do cat /proc/self/cgroup > /dev/null; done
They can ran successfully after implementing this change, with no RCU
warnings in dmesg.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
At present, when we perform operations on the cgroup root_list, we must
hold the cgroup_mutex, which is a relatively heavyweight lock. In reality,
we can make operations on this list RCU-safe, eliminating the need to hold
the cgroup_mutex during traversal. Modifications to the list only occur in
the cgroup root setup and destroy paths, which should be infrequent in a
production environment. In contrast, traversal may occur frequently.
Therefore, making it RCU-safe would be beneficial.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The root hasn't been removed from the root_list, so the list can't be NULL.
However, if it had been removed, attempting to destroy it once more is not
possible. Let's replace this with WARN_ON_ONCE() for clarity.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- a number of input drivers has been converted to use facilities
provided by the device core to instantiate driver-specific attributes
instead of using devm_device_add_group() and similar APIs
- platform input devices have been converted to use remove() callback
returning void
- a fix for use-after-free when tearing down a Synaptics RMI device
- a few flexible arrays in input structures have been annotated with
__counted_by to help hardening efforts
- handling of vddio supply in cyttsp5 driver
- other miscellaneous fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZUyblQAKCRBAj56VGEWX
nDVoAQDzsznzm0JMx+irkldF4fX6jeY6QNlMJbczQMTe1+i+egD/ZeHpvt7UboUo
4J2Hin/datV0HVPl0GUBVw6XVaC4jQ4=
=TD2n
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a number of input drivers has been converted to use facilities
provided by the device core to instantiate driver-specific attributes
instead of using devm_device_add_group() and similar APIs
- platform input devices have been converted to use remove() callback
returning void
- a fix for use-after-free when tearing down a Synaptics RMI device
- a few flexible arrays in input structures have been annotated with
__counted_by to help hardening efforts
- handling of vddio supply in cyttsp5 driver
- other miscellaneous fixups
* tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits)
Input: walkera0701 - use module_parport_driver macro to simplify the code
Input: synaptics-rmi4 - fix use after free in rmi_unregister_function()
dt-bindings: input: fsl,scu-key: Document wakeup-source
Input: cyttsp5 - add handling for vddio regulator
dt-bindings: input: cyttsp5: document vddio-supply
Input: tegra-kbc - use device_get_match_data()
Input: Annotate struct ff_device with __counted_by
Input: axp20x-pek - avoid needless newline removal
Input: mt - annotate struct input_mt with __counted_by
Input: leds - annotate struct input_leds with __counted_by
Input: evdev - annotate struct evdev_client with __counted_by
Input: synaptics-rmi4 - replace deprecated strncpy
Input: wm97xx-core - convert to platform remove callback returning void
Input: wm831x-ts - convert to platform remove callback returning void
Input: ti_am335x_tsc - convert to platform remove callback returning void
Input: sun4i-ts - convert to platform remove callback returning void
Input: stmpe-ts - convert to platform remove callback returning void
Input: pcap_ts - convert to platform remove callback returning void
Input: mc13783_ts - convert to platform remove callback returning void
Input: mainstone-wm97xx - convert to platform remove callback returning void
...
through the cracks (iproc), a core sanitizing improvement as the new
memdup_array_user() helper went upstream (i2c-dev), and two driver
bugfixes (designware, cp2615).
-----BEGIN PGP SIGNATURE-----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=TSKf
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"This contains one patch which slipped through the cracks (iproc), a
core sanitizing improvement as the new memdup_array_user() helper went
upstream (i2c-dev), and two driver bugfixes (designware, cp2615)"
* tag 'for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cp2615: Fix 'assignment to __be16' warning
i2c: dev: copy userspace array safely
i2c: designware: Disable TX_EMPTY irq while waiting for block length byte
i2c: iproc: handle invalid slave state
W/RREG32_RLC is hardedcoded to use instance 0. W/RREG32_SOC15_RLC
should be used instead when inst != 0.
v2: rebase
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_kiq_wreg/rreg is hardcoded to use MEC engine 0.
Add an xcc_id parameter to amdgpu_kiq_wreg/rreg, define W/RREG32_XCC
and amdgpu_device_xcc_wreg/rreg to use the new xcc_id parameter.
Using amdgpu_sriov_runtime to determine whether to access via kiq or
RLC is sufficient for now.
v5: add condition in amdgpu_device_xcc_w/rreg, remove trace func call
v4: avoid using amdgpu_sriov_w/rreg
v3: use W/RREG32_XCC to handle non-kiq case
v2: define amdgpu_device_xcc_wreg/rreg instead of changing parameters
of amdgpu_device_wreg/rreg
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pcs xgmi ras error query support for smu v13.0.6.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spotted by coccicheck, there is a redundant check for
v->SourcePixelFormat[k] != dm_444_16. This patch will
remove it. The corresponding output follows.
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:5130:86-122: duplicated argument to && or ||
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
avoid driver to touch invalid mca reg.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So driver doesn't touch invalid aca entries.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add pcs xgmi v6.4.0 ras support
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change local memory type to MTYPE_UC on revision id 0
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable mca debug mode for smu v13.0.6 by default.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Direct error query mode and firmware error query mode
are supported for now.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refine smu mca driver to support query ras error from pmfw path.
- correct gfx smu bank hwid (from mp5 to smu bank)
- retire unused callback function in amdgpu_mca_smu_funcs{}
- add new mca_bank_set{} structure to collect mca bank
- move enum mca_reg_idx into amdgpu_mca.h header
- add mca status register field decode macro
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following regs can only be programmed by the PF:
HDP_MISC_CNTL
HDP_NONSURFACE_BASE
HDP_NONSURFACE_BASE_HI
v2: update commit message
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCTL0_MMHUB_DEEPSLEEP_IB is blocked for VF access
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Resolves Sphinx unexpected indentation warning when compiling
documentation (e.g. `make htmldocs`). Replaces tabs with spaces and adds
a literal block to keep vertical formatting of the
example power state list.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> (v2)
Acked-by: Randy Dunlap <rdunlap@infradead.org> (v2)
Signed-off-by: Hunter Chasens <hunter.chasens18@ncf.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
