The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230919133207.1400430-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230919133207.1400430-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20230919133207.1400430-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230919133207.1400430-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Link: https://lore.kernel.org/r/20230919133207.1400430-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop CONFIG_NF_LOG_NETDEV as it was removed in commit 1510618e45
("netfilter: nf_log_netdev: merge with nf_log_syslog").
Drop CONFIG_NFT_COUNTER as it was removed in commit 023223dfbf
("netfilter: nf_tables: make counter support built-in").
Drop CONFIG_NF_FLOW_TABLE_IPV6 and CONFIG_NF_FLOW_TABLE_IPV4 as they were
removed in commit c42ba4290b ("netfilter: flowtable: remove ipv4/ipv6
modules").
Drop CONFIG_NF_LOG_BRIDGE as it was removed in commit 77ccee96a6
("netfilter: nf_log_bridge: merge with nf_log_syslog").
Drop CONFIG_IP_NF_TARGET_CLUSTERIP from any remaining arm defconfigs as it
was removed in commit 9db5d918e2 ("netfilter: ip_tables: remove clusterip
target").
Drop CONFIG_USB_MUSB_AM35X as it was removed in commit 57f8e00d8a ("usb:
musb: Drop old unused am35x glue layer").
Drop CONFIG_NFT_OBJREF as it was removed in commit d037abc241
("netfilter: nft_objref: make it builtin").
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/r/20230919125112.15515-2-twoerner@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the generic syscon-poweroff driver used on all Exynos ARM64 SoCs
(e.g. Exynos5433) and few APM SoCs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230901115732.45854-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
NRZ in their EEPROM.
The module also require the ignore tx fault fixup similar to Huawei MA5671A
as it gets disabled on error messages with serial redirection enabled.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The locomolcd driver has one remaining missing-prototype warning:
drivers/video/backlight/locomolcd.c:83:6: error: no previous prototype for 'locomolcd_power' [-Werror=missing-prototypes]
There is in fact an unused prototype with a similar name in a global
header, so move the actual one there and remove the old one.
Link: https://lore.kernel.org/r/20230927194844.680771-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A single fix to address scmi_perf_attributes_get() using the protocol
version even before it was populated and ending up with unexpected
bogowatts power scale.
-----BEGIN PGP SIGNATURE-----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=v9wZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZyGq
-----END PGP SIGNATURE-----
Merge tag 'scmi-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fix for v6.6
A single fix to address scmi_perf_attributes_get() using the protocol
version even before it was populated and ending up with unexpected
bogowatts power scale.
* tag 'scmi-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fixup perf power-cost/microwatt support
Link: https://lore.kernel.org/r/20230927121604.158645-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It has been reported that the driver sets the memory region attributes
for MEM_LEND operation when the specification clearly states not to. The
fix here addresses the issue by ensuring the memory region attributes are
cleared for the memory lending operation.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmUUG70ACgkQAEG6vDF+
4pg0Og//dteLTtj/mHej4fIL3ih0qNN6Ih1NXlqfcgc4Yw7EcLhnKZabwGy3Ybdq
4egdPwHXLPMS7XAxg7y2WWoMA7+raFYp8vYOWOjHdTPmgDjzxHMybMP3J31RSjfL
gi4DoF8g2EF0bwtMvk0A3pTqgQG3YOfMupf9CLPZg5XOmPVDAq5R1zn3hu/Dz/ic
5nkJNkA3VCmLrSzfSEQtC8vDPT0pNID6sLCgByJvx6qqPKAlO6Mhpe1f93N2BMsK
Z24SjevzPHjGFS4MwaW8evDpdTuESUd0MQBV5/yCha8gvJOK2Q0629qLM5fpii7j
ZxHkGaj1pSj9zqCCKOxJVFanxTEJQo8dAbzz446jB7pBkeT4T4sIAsHe+Jw7QIOS
kFT3xOfZwYpCU7nJWEgOaDuNBlHFD5ZiP922tXatX6nj7gEopVpUSg0u1R9/BMHa
DLK3xaF/Gd38KFN52WBV98+jFyE9dUYVu1PLG+uJDvKyS6PoKKmRckNxdtPDpEeH
Lsez4ES9dbb2c+nCrAseUeuFW1D8HBEHo705MIGsefqfqISOrh1A3oj7gEwnv6ho
ZOLKbSHX3ufx3WOm4R8aFtRafP7ZL8X6ovQDCzzYhAitnF2bp+zfjJOkJv4X7OLV
jz8AtdwCT6qW5rg0PCDNo8CrAYN1GA0/+ria17JpKF37Pk5hdjQ=
=Flo6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmUVJ9oACgkQYKtH/8kJ
UidcBRAApJskT2y1BVlZZTtyUuu9cck/dfGfzhP50XiO6m0YYr6W+RnLjWj4o/oc
5Ct7eJsqh8jZ2XbZQfXY/eojts/xyfFq48MBWBkuMECE3M5rsjkPTu1N+WOJiVUt
BlbLmwx5xNuK2JbSdHN/Et4xguau6ZbhZ08nW8+uHOJtxquUjCapWqN9r5cYki8V
NQhdaaT0/YlA4sMPsCN9HkEVR0VYlHkcQo9f8onXg93rUpK3p7hWhz5pUZDJEwZE
CSb+is4ADsNAzioLCTZh9MDMQoaduxQXzw8QjYKY6mxK1VIFDmDmblMl7UFARQs7
ufvqzGZpCqVNrjQK7+vHXakrG5hOA2VmMRhMt60KrY4AVTgpZYNzGqpIz7dlOuxd
8FDwjHEeYZXgtfUA6dxD19oRi49shO3HB34YrTbGi7GOOjuWJl4c3wJtR/Ps1vha
GFnggmOqjRFYi+YBzShCn/pZGgcAHWadcLn3zklCcnNaRj+2voXyqKOkDbuhteFs
4zt1ggvykeAQ8mU9+HwiwIZek9X7hsKI7bz2jKTV8uugqr5DDTnY7vwOtGvZochk
GBpEZH12e5Cf9QO74Nam5kvLJqpj3orhSul0jnWZ1R8n9Obv0IH/ytthctDnP4Ek
XFqGiBoQzDTNIjANcmr0UG46l+95J9Lbi7iyk+tX7z5+wVxkQ7U=
=MdPT
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.6
It has been reported that the driver sets the memory region attributes
for MEM_LEND operation when the specification clearly states not to. The
fix here addresses the issue by ensuring the memory region attributes are
cleared for the memory lending operation.
* tag 'ffa-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
Link: https://lore.kernel.org/r/20230927121555.158619-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The bindings for Qualcomm CPU frequency have a compatible for each SoC.
Add the compatible for SDM670.
Fixes: 0c665213d1 ("arm64: dts: qcom: sdm670: add cpu frequency scaling")
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document that MSM8909 is used with qcom-cpufreq-nvmem for voltage
scaling and to restrict the maximum frequency based on the speedbin
encoded in the nvmem cells.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
MSM8909 uses qcom-cpufreq-nvmem to attach power domains and to parse the
speedbin from NVMEM (for opp-supported-hw).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[ Viresh: Fixed order in table ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The callers of memblock_reserve() do not check the return value
presuming that memblock_reserve() always succeeds, but there are
cases where it may fail.
Having numerous memblock reservations at early boot where
memblock_can_resize is unset may exhaust the INIT_MEMBLOCK_REGIONS sized
memblock.reserved regions array and an attempt to double this array via
memblock_double_array() will fail and will return -1 to the caller.
When this happens the system crashes anyway, but it's hard to identify
the reason for the crash.
Add a panic message to memblock_double_array() to aid debugging of the
cases when too many regions are reserved before memblock can resize
memblock.reserved array.
Link: https://lore.kernel.org/linux-kernel/20230614131746.3670303-1-songshuaishuai@tinylab.org/
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20230624032607.921173-1-songshuaishuai@tinylab.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Make it explicit that child nodes have additional properties and the
child node schema is not complete. The complete schemas are applied
separately based the compatible strings.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230925212626.1974676-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Testcase "Parsing of all PMU events from sysfs" parse events for
all PMUs, and not just cpu. In case of powerpc, the PowerVM
environment supports events from hv_24x7 and hv_gpci PMU which
is of example format like below:
- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/
The value for "?" needs to be filled in depending on system
configuration. It is better to skip these parametrized events
in this test as it is done in:
'commit b50d691e50 ("perf test: Fix "all PMU test" to skip
parametrized events")' which handled a simialr instance with
"all PMU test".
Fix parse-events test to skip parametrized events since
it needs proper setup of the parameters.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230927181703.80936-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add JSON metrics for Arm CMN. Currently just add part of CMN PMU
metrics which are general and compatible for any SoC with CMN-ANY.
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-8-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add new event test for uncore system event which is used to verify the
functionality of "Compat" matching multiple identifiers and the new event
fields "EventidCode" and "NodeType".
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-6-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>