Change the comment to match the function name that the SYSCALL_DEFINE()
macros generate to prevent a kernel-doc warning.
kernel/pid.c:628: warning: expecting prototype for pidfd_open(). Prototype was for sys_pidfd_open() instead
Link: https://lkml.kernel.org/r/20230912060822.2500-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use proper kernel-doc notation to prevent build warnings:
lib/argv_split.c:36: warning: Function parameter or member 'argv' not described in 'argv_free'
lib/argv_split.c:61: warning: No description found for return value of 'argv_split'
Link: https://lkml.kernel.org/r/20230912060838.3794-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Describe missing function parameters to prevent kernel-doc warnings:
lib/scatterlist.c:288: warning: Function parameter or member 'first_chunk' not described in '__sg_alloc_table'
lib/scatterlist.c:800: warning: Function parameter or member 'flags' not described in 'sg_miter_start'
Link: https://lkml.kernel.org/r/20230912060848.4673-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
/proc/${pid}/smaps_rollup is not empty file even if process's address
space is empty, update the test.
Link: https://lkml.kernel.org/r/725e041f-e9df-4f3d-b267-d4cd2774a78d@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Revert 11f956538c ("scripts/gdb/symbols: add specific ko module load
command") due to breakage identified by Johannes Berg in [1].
Fixes: 11f956538c ("scripts/gdb/symbols: add specific ko module load command")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Closes: https://lkml.kernel.org/r/c44b748307a074d0c250002cdcfe209b8cce93c9.camel@sipsolutions.net [1]
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dynamically linking, Address Sanitizer requires its library to be the
first one to be loaded; this is apparently to ensure that every call to
malloc is intercepted. If using LD_PRELOAD, those listed libraries will
be loaded before the libraries listed in the program's ELF and will
therefore violate this requirement, leading to the below failure and
output from ASan.
commit 58e2847ad2 ("selftests: line buffer test program's stdout")
modified the kselftest runner to force line buffering by forcing the test
programs to run through `stdbuf`. It turns out that stdbuf implements
line buffering by injecting a library via LD_PRELOAD. Therefore selftests
that use ASan started failing.
Fix this by statically linking libasan in the affected test programs,
using the `-static-libasan` option. Note this is already the default for
Clang, but not got GCC.
Test output sample for failing case:
TAP version 13
1..3
# timeout set to 300
# selftests: openat2: openat2_test
# ==4052==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 1 selftests: openat2: openat2_test # exit=1
# timeout set to 300
# selftests: openat2: resolve_test
# ==4070==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 2 selftests: openat2: resolve_test # exit=1
Link: https://lkml.kernel.org/r/20230912135048.1755771-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: 58e2847ad2 ("selftests: line buffer test program's stdout")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309121342.97e2f008-oliver.sang@intel.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 4b23a68f95 ("mm/page_alloc: protect PCP lists with a spinlock")
bypasses the pcplist on lock contention and returns the page directly to
the buddy list of the page's migratetype.
For pages that don't have their own pcplist, such as CMA and HIGHATOMIC,
the migratetype is temporarily updated such that the page can hitch a ride
on the MOVABLE pcplist. Their true type is later reassessed when flushing
in free_pcppages_bulk(). However, when lock contention is detected after
the type was already overridden, the bypass will then put the page on the
wrong buddy list.
Once on the MOVABLE buddy list, the page becomes eligible for fallbacks
and even stealing. In the case of HIGHATOMIC, otherwise ineligible
allocations can dip into the highatomic reserves. In the case of CMA, the
page can be lost from the CMA region permanently.
Use a separate pcpmigratetype variable for the pcplist override. Use the
original migratetype when going directly to the buddy. This fixes the bug
and should make the intentions more obvious in the code.
Originally sent here to address the HIGHATOMIC case:
https://lore.kernel.org/lkml/20230821183733.106619-4-hannes@cmpxchg.org/
Changelog updated in response to the CMA-specific bug report.
[mgorman@techsingularity.net: updated changelog]
Link: https://lkml.kernel.org/r/20230911181108.GA104295@cmpxchg.org
Fixes: 4b23a68f95 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Joe Liu <joe.liu@mediatek.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When __ioremap_caller() was replaced by ioremap_prot(), the __ref
annotation added in commit af1415314a ("sh: Flag __ioremap_caller()
__init_refok.") was removed, causing a modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: ioremap_prot+0x88 (section: .text) -> ioremap_fixed (section: .init.text)
ioremap_prot() calls ioremap_fixed() (which is marked __init), but only
before mem_init_done becomes true, so this is safe. Hence fix this by
re-adding the lost __ref.
Link: https://lkml.kernel.org/r/20230911093850.1517389-1-geert+renesas@glider.be
Fixes: 0453c9a780 ("sh: mm: convert to GENERIC_IOREMAP")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the i2c_dev_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On PREEMPT_RT keeping preemption disabled during the invocation of
cgroup_enter_frozen() is a problem because the function acquires
css_set_lock which is a sleeping lock on PREEMPT_RT and must not be
acquired with disabled preemption.
The preempt-disabled section is only for performance optimisation reasons
and can be avoided.
Extend the comment and don't disable preemption before scheduling on
PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230803100932.325870-3-bigeasy@linutronix.de
Commit 53da1d9456 ("fix ptrace slowness") added a preempt-disable section
between read_unlock() and the following schedule() invocation without
explaining why it is needed.
Replace the existing contentless comment with a proper explanation to
clarify that it is not needed for correctness but for performance reasons.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20230803100932.325870-2-bigeasy@linutronix.de
Using the I2C host controller on the MT7981 SoC requires 4 clocks to
be enabled. One of them, the pmic clk, is only enabled in case
'mediatek,have-pmic' is also set which has other consequences which
are not desired in this case.
Allow defining a pmic clk even in case the 'mediatek,have-pmic' propterty
is not present and the bus is not used to connect to a pmic, but may
still require to enable the pmic clock.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In few places relevant registers are reset to their initial value on
driver load. Factor this out to new helper i801_restore_regs to avoid
code duplication.
Even though no actual problems are known, this patch may contribute
to avoiding potential issues by:
- restoring register values also in the error path of i2c_add_adapter
- making restoring registers the last step (especially in i801_remove)
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The DesignWare IP can be synthesized with the IC_EMPTYFIFO_HOLD_MASTER_EN
parameter.
In this case, when the TX FIFO gets empty and the last command didn't have
the STOP bit (IC_DATA_CMD[9]), the controller will hold SCL low until
a new command is pushed into the TX FIFO or the transfer is aborted.
When the controller is holding SCL low, it cannot be disabled.
The transfer must first be aborted.
Also, the bus recovery won't work because SCL is held low by the master.
Check if the master is holding SCL low in __i2c_dw_disable() before trying
to disable the controller. If SCL is held low, an abort is initiated.
When the abort is done, then proceed with disabling the controller.
This whole situation can happen for instance during SMBus read data block
if the slave just responds with "byte count == 0".
This puts the driver in an unrecoverable state, because the controller is
holding SCL low and the current __i2c_dw_disable() procedure is not
working. In this situation only a SoC reset can fix the i2c bus.
Co-developed-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
On Meteorlake onwards, HW specs require that all user contexts that
run on render or compute engines and require PXP must enforce
run-alone bit in lrc. Add this enforcement for protected contexts.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230917211933.1407559-4-alan.previn.teres.alexis@intel.com
Update the max GSC-fw response time to match updated internal
fw specs. Because this response time is an SLA on the firmware,
not inclusive of i915->GuC->HW handoff latency, when submitting
requests to the GSC fw via intel_gsc_uc_heci_cmd_submit helpers,
start the count after the request hits the GSC command streamer.
Also, move GSC_REPLY_LATENCY_MS definition from pxp header to
intel_gsc_uc_heci_cmd_submit.h since its for any GSC HECI packet.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230917211933.1407559-2-alan.previn.teres.alexis@intel.com
Add support for camera qdss, sleep and xo clocks.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-5-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients to be
able to request for camcc clocks on SM8550 platform.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-4-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Lucid ole pll has as extra RINGOSC_CAL_L field in L register in
addition to the fields that are part of lucid evo pll, hence add
support for lucid ole pll configure function to configure the ole plls.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-3-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the camera clock controller on
Qualcomm SM8550 platform.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230707035744.22245-2-quic_jkona@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The device_for_each_child_node loop should call fwnode_handle_put()
before return in the error cases, to avoid resource leaks.
Let's fix this bug in pmic_glink_altmode_probe().
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230612133452.47315-1-luhongfei@vivo.com
[bjorn: Rebased patch, moved fw_handle_put() from jump target into the loop]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
disabled
When no directory lease support, or for IPC shares where directories
can not be opened, do not start an unneeded laundromat thread for
that mount (it wastes resources).
Fixes: d14de8067e ("cifs: Add a laundromat thread for cached directories")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Some small updates to the driver defaults to ensure a good pop
performance on jack insert and removal.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
When a firmware crashes it creats a panic information into a telemetry
slot. The panic format is defined by Zephyr, includes stack and
additional information to help to identify the reason for the crash.
Part of the firmware exception handling the firmware also sends an
EXCEPTION_CAUGHT notification.
This series implements the kernel side handling of the exception: print
information into the kernel log export the whole telemetry slot to user
space for tools extract additional information from the panic dump.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Currently IPC4 has no notion of a switch or enum type of control which
is a generic concept in ALSA.
The generic support for these control types will be as follows:
- large config is used to send the channel-value par array
- param_id of a SWITCH type is 200
- param_id of an ENUM type is 201
Each module need to support a switch or/and enum must handle these
universal param_ids. The message payload is described by struct
sof_ipc4_control_msg_payload.
Lorenzo Bianconi says:
====================
Add WED support for MT7988 chipset
Similar to MT7622 and MT7986, introduce Wireless Ethernet Dispatcher (WED)
support for MT7988 chipset in order to offload to the hw packet engine traffic
received from LAN/WAN device to WLAN nic (MT7996E).
Add WED RX support in order to offload traffic received by WLAN nic to the
wired interfaces (LAN/WAN).
====================
Link: https://lore.kernel.org/r/cover.1695032290.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for resetting Wireless Ethernet Dispatcher 3.0
available on MT988 SoC.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move specific WED2.0 debugfs entries out of regs array. This is a
preliminary patch to introduce WED 3.0 debugfs info.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MT7988 SoC support 802.11 receive reordering offload in hw while
MT7986 SoC implements it through the firmware running on the mcu.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce partial AMSDU offload support for MT7988 SoC in order to merge
in hw packets belonging to the same AMSDU before passing them to the
WLAN nic.
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor mtk_wed_check_wfdma_rx_fill() in order to be reused adding HW
receive offload support for MT7988 SoC.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to MT7986 and MT7622, enable Wireless Ethernet Ditpatcher for
MT7988 in order to offload traffic forwarded from LAN/WLAN to WLAN/LAN
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH and
MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH definitions for MT7986 (MT7986 is
the only SoC to use them).
Fixes: de84a090d9 ("net: ethernet: mtk_eth_wed: add wed support for mt7986 chipset")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make mtk_wed_wo_memory_region optionals.
This is a preliminary patch to introduce Wireless Ethernet Dispatcher
support for MT7988 SoC since MT7988 WED fw image will have a different
layout.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove mtk_wed_wo_memory_region boot structure in mtk_wed_wo.
This is a preliminary patch to introduce WED support for MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce mtk_wed_buf structure to store both virtual and physical
addresses allocated in mtk_wed_tx_buffer_alloc() routine. This is a
preliminary patch to add WED support for MT7988 SoC since it relies on a
different dma descriptor layout not storing page dma addresses.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename mtk_rxbm_desc structure in mtk_wed_bm_desc since it will be used
even on tx side by MT7988 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check if rx offload is supported running mtk_wed_get_rx_capa routine
before configuring it. This is a preliminary patch to introduce Wireless
Ethernet Dispatcher (WED) support for MT7988 SoC.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to mtk_eth_soc, introduce the following wed versioning
utility routines:
- mtk_wed_is_v1
- mtk_wed_is_v2
This is a preliminary patch to introduce WED support for MT7988 SoC
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>