Space reservation is already safe with respect to the ring->size
modulus, but hardware only expects to see values in the range
0...ring->size-1 (inclusive) and so requires the modulus to prevent us
writing the value ring->size instead of 0. As this is only required for
the register itself, we can defer the modulus to the register update and
not perform it after every command packet. We keep the
intel_ring_advance() around in the code to provide demarcation for the
end-of-packet (which then can be compared against intel_ring_begin() as
the number of dwords emitted must match the reserved space).
v2: Assert that the ring size is a power-of-two to match assumptions in
the code. Simplify the comment before writing the tail value to explain
why the modulus is necessary.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-13-git-send-email-chris@chris-wilson.co.uk
Rather than passing a complete set of GPU cache domains for either
invalidation or for flushing, or even both, just pass a single parameter
to the engine->emit_flush to determine the required operations.
engine->emit_flush(GPU, 0) -> engine->emit_flush(EMIT_INVALIDATE)
engine->emit_flush(0, GPU) -> engine->emit_flush(EMIT_FLUSH)
engine->emit_flush(GPU, GPU) -> engine->emit_flush(EMIT_FLUSH | EMIT_INVALIDATE)
This allows us to extend the behaviour easily in future, for example if
we want just a command barrier without the overhead of flushing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-8-git-send-email-chris@chris-wilson.co.uk
Space for flushing the GPU cache prior to completing the request is
preallocated and so cannot fail - the GPU caches will always be flushed
along with the completed request. This means we no longer have to track
whether the GPU cache is dirty between batches like we had to with the
outstanding_lazy_seqno.
With the removal of the duplication in the per-backend entry points for
emitting the obsolete lazy flush, we can then further unify the
engine->emit_flush.
v2: Expand a bit on the legacy of gpu_caches_dirty
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-18-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-7-git-send-email-chris@chris-wilson.co.uk
The state stored in this struct is not only the information about the
buffer object, but the ring used to communicate with the hardware. Using
buffer here is overly specific and, for me at least, conflates with the
notion of buffer objects themselves.
s/struct intel_ringbuffer/struct intel_ring/
s/enum intel_ring_hangcheck/enum intel_engine_hangcheck/
s/describe_ctx_ringbuf()/describe_ctx_ring()/
s/intel_ring_get_active_head()/intel_engine_get_active_head()/
s/intel_ring_sync_index()/intel_engine_sync_index()/
s/intel_ring_init_seqno()/intel_engine_init_seqno()/
s/ring_stuck()/engine_stuck()/
s/intel_cleanup_engine()/intel_engine_cleanup()/
s/intel_stop_engine()/intel_engine_stop()/
s/intel_pin_and_map_ringbuffer_obj()/intel_pin_and_map_ring()/
s/intel_unpin_ringbuffer()/intel_unpin_ring()/
s/intel_engine_create_ringbuffer()/intel_engine_create_ring()/
s/intel_ring_flush_all_caches()/intel_engine_flush_all_caches()/
s/intel_ring_invalidate_all_caches()/intel_engine_invalidate_all_caches()/
s/intel_ringbuffer_free()/intel_ring_free()/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-15-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-4-git-send-email-chris@chris-wilson.co.uk
Bspec says:
"Restriction : SRD must not be enabled when the PSR Setup time from DPCD
00071h is greater than the time for vertical blank minus one line."
Let's check for that and disallow PSR if we exceed the limit.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add a small helper to parse the PSR setup time from the DPCD PSR
capabilities and return the value in microseconds.
v2: Don't waste so many bytes on the psr_setup_time_us[] table
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updated the i915_drpc_info debugfs with coarse power gating & forcewake
info for Gen9.
v2: Change all IS_GEN9() by gen >= 9 (Damien)
v3: Rebase
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467038401-8283-1-git-send-email-akash.goel@intel.com
There are two paths into intel_cleanup_plane_fb, the normal completion
path and the failure path.
In the failure case, intel_cleanup_plane_fb is called before
drm_atomic_helper_swap_state, so any wait_req reference made in
intel_prepare_plane_fb will be in old_intel_state->wait_req.
In the normal completion path, drm_atomic_helper_swap_state has
already been called, so the plane state holding the just-used wait_req
will not be in old_intel_state->wait_req, rather it will be in the
state associated with the plane itself.
Clearing this reference ensures that the wait_req will be freed as
soon as it the related mode setting operation is complete, rather than
waiting for some future mode setting operation to eventually
dereference it.
The existing dereference of old_intel_state->wait_req is still
required as that will hold the wait_req when the mode setting
operation fails.
cc: Daniel Vetter <daniel.vetter@intel.com>
cc: David Airlie <airlied@linux.ie>
cc: intel-gfx@lists.freedesktop.org
cc: dri-devel@lists.freedesktop.org
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to Bspec FW_BLC_SELF exists on 915G also. Let's program it.
The only open question is whether there's is a memory self-refresh
enable bit somewhere as well. For 945G/GM it's in FW_BLC_SELF, for
915GM it's in INSTPM. For 915G I can't find one in the docs. Let's drop
a FIXME about this, in case someone with the hardware is ever bored
enough to look for it.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469804222-12650-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bspec says:
"FW_BLC_SELF
...
Programming Note [DevALV] and [DevCST]: When calculating watermark
values for 15/16bpp, assume 32bpp for purposes of calculation using
the high priority bandwidth analysis spreadsheet."
Let's do that.
Perhaps this might even help with the problem that resulted in
commit 2ab1bc9df0 ("drm/i915: Disable self-refresh for untiled fbs on i915gm")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1469804222-12650-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We no longer have any need to look up the intel_digital_port based
on the passed in intel_encoder, but we still want to look up the port.
Let's just move that logic into intel_ddi_get_encoder_port() and drop
the dig_port stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-9-git-send-email-ville.syrjala@linux.intel.com
Now that the SKL iboost programming is done from intel_ddi_pre_enable()
for HDMI, let's move the BXT bxt_ddi_vswing_sequence() call there as
well. This makes things look more similar to the DP/eDP case which
is handled in ddi_signal_levels().
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Bspec says:
"For DDIA with x4 capability (DDI_BUF_CTL DDIA Lane Capability Control =
DDIA x4), the I_boost value has to be programmed in both
tx_blnclegsctl_0 and tx_blnclegsctl_4."
Currently we only program tx_blnclegsctl_0. Let's do the other one as
well.
Cc: stable@vger.kernel.org
Fixes: f8896f5d58 ("drm/i915/skl: Buffer translation improvements")
Cc: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
In the middle of intel_gt_init_powersave() we have an if-chain that ends
with a universal else clause to read gen6+ registers. Older platforms
like Pineview that end up here do not like those registers and may even
OOPS whilst reading them!
Fixes: 3ea9a80132 ("drm/i915: Perform static RPS frequency setup ...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470132927-1821-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Runtime PM fixes, fbcon and nv30 fix.
* 'linux-4.8' of git://github.com/skeggsb/linux:
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's already covered by the default case, but add it for
consistency.
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like this got missed when we ported the code from radeon.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When reading the SSEU statistics, we need to call
intel_runtime_pm_get() first, otherwise we might end up
triggering "Device suspended during HW access".
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470062007-26996-1-git-send-email-david.weinehall@linux.intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This should fix some unaligned access warnings. This is also likely to
fix non-descript issues on nv30/nv34 as a result of incorrect channel
setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96836
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since "PCI: Add runtime PM support for PCIe ports", the parent PCIe port
can be runtime-suspended which disables power resources via ACPI. This
is incompatible with DSM, resulting in a GPU device which is still in D3
and locks up the kernel on resume (on a Clevo P651RA, GTX965M).
Mirror the behavior of Windows 8 and newer[1] (as observed via an AMLi
debugger trace) and stop using the DSM functions for D3cold when power
resources are available on the parent PCIe port.
pci_d3cold_disable() is not used because on some machines, the old DSM
method is broken. On a Lenovo T440p (GT 730M) memory and disk corruption
would occur, but that is fixed with this patch[2].
[1]: https://msdn.microsoft.com/windows/hardware/drivers/bringup/firmware-requirements-for-d3cold
[2]: https://github.com/Bumblebee-Project/bbswitch/issues/78#issuecomment-223549072
v2: simply check directly for _PR3. Added affected machines.
v3: fixed block comment coding style.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: Dave Airlie <airlied@redhat.com
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Do not unconditionally invoke function 0x1B without checking for its
availability, it leads to an infinite loop on some firmware.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104791
Fixes: 5addcf0a5f ("nouveau: add runtime PM support (v0.9)")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: Dave Airlie <airlied@redhat.com
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Return the set of supported functions to the caller. No functional
changes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: Dave Airlie <airlied@redhat.com
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ensure that the returned set of supported DSM functions (MUX, Optimus)
match the ACPI handle that is set in nouveau_dsm_pci_probe.
As there are no machines with a MUX function on just one PCI device and
an Optimus on another, there should not be a functional impact. This
change however makes this implicit assumption more obvious.
Convert int to bool and rename has_dsm to has_mux while at it. Let the
caller set nouveau_dsm_priv.dhandle as needed.
v2: pass dhandle to the caller.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: Dave Airlie <airlied@redhat.com
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The patch f045f459d9 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses")
tries to fix some out of memory accesses. Unfortunatelly, the patch breaks the
display when using fonts with width that is not divisiable by 8.
The monochrome bitmap for each character is stored in memory by lines from top
to bottom. Each line is padded to a full byte.
For example, for 22x11 font, each line is padded to 16 bits, so each
character is consuming 44 bytes total, that is 11 32-bit words. The patch
f045f459d9 changed the logic to "dsize = ALIGN(image->width *
image->height, 32) >> 5", that is just 8 words - this is incorrect and it
causes display corruption.
This patch adds the necesary padding of lines to 8 bytes.
This patch should be backported to stable kernels where f045f459d9 was
backported.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: f045f459d9 ("drm/nouveau/fbcon: fix out-of-bounds memory accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>