The values of all but the RADEON_HPD_NONE members of the radeon_hpd_id
enum transform 1:1 into bit positions within the 'enabled' bitset as
assembled by evergreen_hpd_init():
enabled |= 1 << radeon_connector->hpd.hpd;
However, if ->hpd.hpd happens to equal RADEON_HPD_NONE == 0xff, UBSAN
reports
UBSAN: Undefined behaviour in drivers/gpu/drm/radeon/evergreen.c:1867:16
shift exponent 255 is too large for 32-bit type 'int'
[...]
Call Trace:
[<ffffffff818c4d35>] dump_stack+0xbc/0x117
[<ffffffff818c4c79>] ? _atomic_dec_and_lock+0x169/0x169
[<ffffffff819411bb>] ubsan_epilogue+0xd/0x4e
[<ffffffff81941cbc>] __ubsan_handle_shift_out_of_bounds+0x1fb/0x254
[<ffffffffa0ba7f2e>] ? atom_execute_table+0x3e/0x50 [radeon]
[<ffffffff81941ac1>] ? __ubsan_handle_load_invalid_value+0x158/0x158
[<ffffffffa0b87700>] ? radeon_get_pll_use_mask+0x130/0x130 [radeon]
[<ffffffff81219930>] ? wake_up_klogd_work_func+0x60/0x60
[<ffffffff8121a35e>] ? vprintk_default+0x3e/0x60
[<ffffffffa0c603c4>] evergreen_hpd_init+0x274/0x2d0 [radeon]
[<ffffffffa0c603c4>] ? evergreen_hpd_init+0x274/0x2d0 [radeon]
[<ffffffffa0bd196e>] radeon_modeset_init+0x8ce/0x18d0 [radeon]
[<ffffffffa0b71d86>] radeon_driver_load_kms+0x186/0x350 [radeon]
[<ffffffffa03b6b16>] drm_dev_register+0xc6/0x100 [drm]
[<ffffffffa03bc8c4>] drm_get_pci_dev+0xe4/0x490 [drm]
[<ffffffff814b83f0>] ? kfree+0x220/0x370
[<ffffffffa0b687c2>] radeon_pci_probe+0x112/0x140 [radeon]
[...]
=====================================================================
radeon 0000:01:00.0: No connectors reported connected with modes
At least on x86, there should be no user-visible impact as there
1 << 0xff == 1 << (0xff & 31) == 1 << 31
holds and 31 > RADEON_MAX_HPD_PINS. Thus, this patch is a cosmetic one.
All of the above applies analogously to evergreen_hpd_fini(),
r100_hpd_init(), r100_hpd_fini(), r600_hpd_init(), r600_hpd_fini(),
rs600_hpd_init() and rs600_hpd_fini()
Silence UBSAN by checking ->hpd.hpd for RADEON_HPD_NONE before oring it
into the 'enabled' bitset in the *_init()- or the 'disabled' bitset in
the *_fini()-functions respectively.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
White space fix.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is not a fatal error.
v2: add comment why ignore the error here.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to soft reset VCE as part of the clockgating
sequence.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is to fix fatal page fault error that occured if:
job is signaled/released after its timeout work is already
put to the global queue (in this case the cancel_delayed_work
will return false), which will lead to NX-protection error
page fault during job_timeout_func.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two callbacks to scheduler to maintain jobs, and invoked for
job timeout calculations. Now TDR measures time gap from
job is processed by hw.
v2:
fix typo
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
original time out detect routine is incorrect, cuz it measures
the gap from job scheduled, but we should only measure the
gap from processed by hw.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the mirror_list will be used for later time out detect
feature. This is needed to properly detect a GPU
timeout with the scheduler.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for those jobs submitted through scheduler, do not
free it immediately after scheduled, instead free it
in global workqueue by its sched fence signaling
callback function.
v2:
call uf's bo_undef after job_run()
call job's sync free after job_run()
no static inline __amdgpu_job_free() anymore, just use
kfree(job) to replace it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consolidate job initialization in one place rather than
duplicating it in multiple places.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More ground work for conditional execution on SDMA
necessary for preemption.
Signed-off-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds the groundwork for conditional execution on
SDMA which is necessary for preemption.
Signed-off-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: the signaled items on the LRU maintain their order
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is only used locally in amdgpu_get_bios
Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some GPU block like UVD and VCE require hard reset to be properly
resume if there is no real powerdown of the asic like during various
hibernation step. This patch perform such hard reset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, like when freezing for hibernation, we need to be
able to force hard reset even if no engine are stuck. This patch
add a bool option to current asic reset callback to allow to force
hard reset on asic that supports it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Quite few suspend/hibernation bugs are related to this block. Add
an option to disable those as a work around.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Quite few suspend/hibernation bugs are related to this block. Add
an option to disable those as a work around.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_vce doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will later on serve for module option to disable vce.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This match the exact same control flow as existing code. It just
use goto instead of multiple levels of if/else. It also clarify
early initialization failures by clearing rdev->has_uvd doing so
does not change end result from hardware point of view, it only
avoids printing more error messages down the line and thus only
the original error is reported.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The async name is deprecated and should be changed to nonblocking.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-9-git-send-email-maarten.lankhorst@linux.intel.com
This is the first step of renaming async commit to nonblocking commit.
The flag passed by userspace is NONBLOCKING, and async has a different
meaning for page flips, where it means as soon as possible.
Fixing up comments in drm core is done manually, to make sure I didn't
miss anything.
For drivers, the following cocci script is used to rename bool async to bool
nonblock:
@@
identifier I =~ "^async";
identifier func;
@@
func(..., bool
- I
+ nonblock
, ...)
{
<...
- I
+ nonblock
...>
}
@@
identifier func;
type T;
identifier I =~ "^async";
@@
T func(..., bool
- I
+ nonblock
, ...);
Thanks to Tvrtko Ursulin for the cocci script.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-2-git-send-email-maarten.lankhorst@linux.intel.com