Commit graph

30,634 commits

Author SHA1 Message Date
Ben Skeggs
96fc422c27 drm/nouveau/gm200: enable graphics device
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:18 +10:00
Ben Skeggs
9ec280529a drm/nouveau/gr/gm200: s/gm204/gm200/
Most of the per-chipset differences will go away when we fully switch
to using the register lists provided by the firmware files, which will
leave all the remaining code "belonging" to GM200.

This is a preemptive rename from GM204 to GM200.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:18 +10:00
Ben Skeggs
e24c9c44d7 drm/nouveau/bios/devinit: properly handle unknown generic conditions
Upon encountering an unknown condition code, the script interpreter
is supposed to skip 'size' bytes and continue at the next devinit
token.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:17 +10:00
Ben Skeggs
989f578473 drm/nouveau/bios/devinit: rename INIT_DP_CONDITION to INIT_GENERIC_CONDITION
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:17 +10:00
Ben Skeggs
96aedd0ba9 drm/nouveau/ltc/gm107: fix slice intr offset
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:16 +10:00
Alexandre Courbot
a6a0f67ca7 drm/nouveau/devinit/gf100-: detect if BIOS invoked devinit
It is not advisable to perform devinit if it has already been done.
VBIOS will very likely have invoked devinit if the GPU is the primary
graphics device, but there is no accurate way to detect this fact yet.

This patch adds such a method for gf100 and later chips, by means of the
NV_PTOP_SCRATCH1_DEVINIT_COMPLETED bit. This bit is set to 1 by devinit,
and reset to 0 when the GPU is powered.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:16 +10:00
Alexandre Courbot
8fb1240a71 drm/nouveau/devinit/nv50: remove unneeded variable
We never use any nv50-specific member in this nv50_devinit_preinit().

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:15 +10:00
Ben Skeggs
db1eb52846 drm/nouveau: s/gm204/gm200/ in a number of places
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:12 +10:00
Ben Skeggs
2ed95a4c65 drm/nouveau: recognise GM200 chipset
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:13:06 +10:00
Alexandre Courbot
1b82111fae drm/nouveau/device/tegra: fix uninitialized IRQ number
nvkm_device_tegra_new initializes the irq member of the Tegra device
to -1 in order to signal that it is uninitialized. However,
nvkm_device_tegra_fini tests it against 0 to check whether an IRQ has
been allocated or not. This leads to free_irq being called on -1 during
device initialization.

Fix this by using 0 as the uninitialized value everywhere.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:11:06 +10:00
Alexandre Courbot
0529a46a7a drm/nouveau/device: call nvkm_device_fini if nvkm_device_init fails
nvkm_device_fini is never called if a failure occurs in
nvkm_device_init, even when unloading the module. This can lead to a
resources leak (one example is the Tegra interrupt which would never be
freed in that case). Fix this by calling nvkm_device_fini in
nvkm_device_init's failure path.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:11:06 +10:00
Alexandre Courbot
33bcb4c340 drm/nouveau/gr/gf100: use the nvkm_firmware functions
Use the nvkm_firmware_* functions when loading external firmware to
avoid duplicate code.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:11:06 +10:00
Alexandre Courbot
046fdb2a59 drm/nouveau/core: add firmware handling functions
Add two functions nvkm_firmware_get() and nvkm_firmware_put() to load a
firmware file and free its resources, respectively. Since firmware files
are becoming a necessity for new GPUs, and their location has been
standardized to nvidia/chip/, this will prevent duplicate and
error-prone name-generation code.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:11:06 +10:00
Alexandre Courbot
f0db6e3be9 drm/nouveau/ltc/gm107: wait on relevant bit in gm107_ltc_cbc_wait
Patch "ltc/gm107: use nvkm_mask to set cbc_ctrl1" sets the 3rd bit
of the CTRL1 register instead of writing it entirely in
gm107_ltc_cbc_clear(). As a counterpart, gm107_ltc_cbc_wait() must also
be modified to wait on that single bit only, otherwise a timeout may
occur if some other bit of that register is set. This happened at least
on GM206 when running glmark2-drm.

While we are at it, use the more compact nvkm_wait_msec() to wait for
the bit to clear.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-03-14 10:11:06 +10:00
Dan Carpenter
585cb132a4 drm/vc4: Return -EFAULT on copy_from_user() failure
The copy_from_user() function returns the number of bytes not copied but
we want to return a negative error code.

Fixes: 463873d570 ('drm/vc4: Add an API for creating GPU shaders in GEM BOs.')
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-13 17:09:12 -07:00
Eric Anholt
0b06e0a794 drm/vc4: Respect GPIO_ACTIVE_LOW on HDMI HPD if set in the devicetree.
The original Raspberry Pi had the GPIO active high, but the later
models are active low.  The DT GPIO bindings allow specifying the
active flag, except that it doesn't get propagated to the gpiodesc, so
you have to handle it yourself.

Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Daniel Stone <daniels@collabora.com>
2016-03-13 17:06:57 -07:00
Eric Anholt
0e60eab575 drm/vc4: Let gpiolib know that we're OK with sleeping for HPD.
Fixes an error thrown every few seconds when we poll HPD when it's on
a I2C to GPIO expander.

Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Daniel Stone <daniels@collabora.com>
2016-03-13 17:06:36 -07:00
Varad Gautam
ca26d28bba drm/vc4: improve throughput by pipelining binning and rendering jobs
The hardware provides us with separate threads for binning and
rendering, and the existing model waits for them both to complete
before submitting the next job.

Splitting the binning and rendering submissions reduces idle time and
gives us approx 20-30% speedup with some x11perf tests such as -line10
and -tilerect1.  Improves openarena performance by 1.01897% +/-
0.247857% (n=16).

Thanks to anholt for suggesting this.

v2: Rebase on the spurious resets fix (change by anholt).

Signed-off-by: Varad Gautam <varadgautam@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-13 17:05:05 -07:00
Dave Airlie
67d1c0a25c Merge tag 'drm-vc4-fixes-2016-03-03' of github.com:anholt/linux into drm-next
This pull request fixes the major VC4 HDMI modesetting bugs found when
the first wave of users showed up in Raspbian.

* tag 'drm-vc4-fixes-2016-03-03' of github.com:anholt/linux:
  drm/vc4: Initialize scaler DISPBKGND on modeset.
  drm/vc4: Fix setting of vertical timings in the CRTC.
  drm/vc4: Fix the name of the VSYNCD_EVEN register.
  drm/vc4: Add another reg to HDMI debug dumping.
  drm/vc4: Bring HDMI up from power off if necessary.
  drm/vc4: Fix a framebuffer reference leak on async flip interrupt.
2016-03-14 09:48:04 +10:00
Dave Airlie
c3d7a1d1e6 Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: add DRM_EXYNOS_GEM_MAP ioctl
2016-03-14 09:46:46 +10:00
Dave Airlie
9b61c0fcdf Merge drm-fixes into drm-next.
Nouveau wanted this to avoid some worse conflicts when I merge that.
2016-03-14 09:46:02 +10:00
Lionel Landwerlin
c1f415c9ac drm: atomic helper: do not unreference error pointer
562c5b4d89 didn't quite fix the issue of dealing with an error
pointer. We can't free/unref an error pointer so reset it to NULL.

Many thanks to Dan Carpenter for pointing this out again.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Fixes: 562c5b4d89 ("drm: fix blob pointer check")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1457698646-22231-1-git-send-email-lionel.g.landwerlin@intel.com
2016-03-13 19:39:54 +01:00
Ville Syrjälä
7c01878254 drm/edid: Extract SADs properly from multiple audio data blocks
SADs may span multiple CEA audio data blocks in the EDID.

CEA-861-E says:
"The order of the Data Blocks is not constrained. It is also possible
to have more than one of a specific type of data block if necessary to
include all of the descriptors needed to describe the sink’s capabilities."

Each audio data block can carry up to 10 SADs, whereas the ELD SAD limit
is 15 according to HDA 1.0a spec. So we should support at least two data
blocks. And apparently some devices take a more liberal interpretation
and stuff only one SAD per data block even when they would fit into one.

So let's try to extract all the SADs we can fit into the ELD even when
they span multiple data blocks.

While at it, toss in a comment to explain the 13 byte monitor name
string limit which confused me at first.

Cc: Arturo Pérez <artur999555@gmail.com>
Tested-by: Arturo Pérez <artur999555@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94197
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1457554066-8739-1-git-send-email-ville.syrjala@linux.intel.com
2016-03-13 19:36:17 +01:00
Joonyoung Shim
6564c65f3a drm/exynos: add DRM_EXYNOS_GEM_MAP ioctl
The commit d931589c01 ("drm/exynos: remove DRM_EXYNOS_GEM_MAP_OFFSET
ioctl") removed it same with the ioctl that this patch adds. The reason
that removed DRM_EXYNOS_GEM_MAP_OFFSET was we could use
DRM_IOCTL_MODE_MAP_DUMB. Both did exactly same thing.

Now we again will revive it as DRM_EXYNOS_GEM_MAP because of render
node. DRM_IOCTL_MODE_MAP_DUMB isn't permitted in render node.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-03-13 14:54:03 +09:00
Linus Torvalds
3ab0a0f91c Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm/i915 fixes from Dave Airlie:
 "Just two i915 regression fixes, that should be it from me"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Actually retry with bit-banging after GMBUS timeout
  drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
2016-03-11 16:19:23 -08:00
Dave Airlie
125234dc8b Merge tag 'drm-intel-fixes-2016-03-11' of git://anongit.freedesktop.org/drm-intel into drm-next
Two i915 regression fixes.

* tag 'drm-intel-fixes-2016-03-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Actually retry with bit-banging after GMBUS timeout
  drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
2016-03-12 06:53:30 +10:00
Ville Syrjälä
0bbca274a3 drm/i915: Actually retry with bit-banging after GMBUS timeout
After the GMBUS transfer times out, we set force_bit=1 and
return -EAGAIN expecting the i2c core to call the .master_xfer
hook again so that we will retry the same transfer via bit-banging.
This is in case the gmbus hardware is somehow faulty.

Unfortunately we left adapter->retries to 0, meaning the i2c core
didn't actually do the retry. Let's tell the core we want one retry
when we return -EAGAIN.

Note that i2c-algo-bit also uses this retry count for some internal
retries, so we'll end up increasing those a bit as well.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: bffce907d6 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8b1f165a4a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-11 10:23:28 +02:00
Christian König
00b7c4ff7d drm/amdgpu: split pipeline sync out of SDMA vm_flush() as well
Code it similar to how we did it for the gfx and compute engines.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-10 10:36:13 -05:00
Maarten Lankhorst
842e03076f drm/i915: Update state before setting watermarks, v2.
When intel_update_watermarks is called on skylake from the hw
state readout disable function it calls intel_update_watermarks.
intel_update_watermarks inspects crtc->state, which should be
set to disabled.

This wasn't the case, and this resulted in a divide-by-zero in
skl_update_wm when intel_update_watermarks got called.

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 295 at drivers/gpu/drm/i915/intel_pm.c:2834
skl_update_pipe_wm+0x102/0x8c0 [i915]()
 WARN_ON(!config->num_pipes_active)
 Modules linked in: coretemp i915(+)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 CPU: 1 PID: 295 Comm: systemd-udevd Tainted: G     U  W       4.5.0-rc4
-xxxxxx #25
 Hardware name: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  0000000000000000 ffff88003777f5a8 ffffffff813485c2 ffff88003777f5f0
  ffffffffa0236240 ffff88003777f5e0 ffffffff81050fce ffff8800aa420000
  ffff8800aba18000 ffff8800aba18000 ffff880037304c00 ffff8800aa420000
 Call Trace:
  [<ffffffff813485c2>] dump_stack+0x67/0x95
  [<ffffffff81050fce>] warn_slowpath_common+0x9e/0xc0
  [<ffffffff8105103c>] warn_slowpath_fmt+0x4c/0x50
  [<ffffffff8106945e>] ? flush_work+0x8e/0x280
  [<ffffffff810693d5>] ? flush_work+0x5/0x280
  [<ffffffffa016add2>] skl_update_pipe_wm+0x102/0x8c0 [i915]
  [<ffffffffa016b96f>] skl_update_wm+0xff/0x5f0 [i915]
  [<ffffffff810928ee>] ? trace_hardirqs_on_caller+0x15e/0x1d0
  [<ffffffff8109296d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffffa016ce6e>] intel_update_watermarks+0x1e/0x30 [i915]
  [<ffffffffa01d3ee2>] intel_crtc_disable_noatomic+0xd2/0x150 [i915]
  [<ffffffffa01dd3d2>] intel_modeset_setup_hw_state+0xdd2/0xde0 [i915]
  [<ffffffffa01dfd83>] intel_modeset_init+0x15a3/0x1950 [i915]
  [<ffffffffa02160b6>] i915_driver_load+0x13c6/0x1720 [i915]
  [<ffffffff81522160>] ? add_sysfs_fw_map_entry+0x9b/0x9b
  [<ffffffffa00b15ef>] drm_dev_register+0x6f/0xb0 [drm]
  [<ffffffffa00b3b3a>] drm_get_pci_dev+0x10a/0x1d0 [drm]
  [<ffffffffa01582d9>] i915_pci_probe+0x49/0x50 [i915]
  [<ffffffff8138ae30>] pci_device_probe+0x80/0xf0
  [<ffffffff8143e2ac>] driver_probe_device+0x1bc/0x3d0
  [<ffffffff8143e526>] __driver_attach+0x66/0x90
  [<ffffffff8143e4c0>] ? driver_probe_device+0x3d0/0x3d0
  [<ffffffff8143be3b>] bus_for_each_dev+0x5b/0xa0
  [<ffffffff8143db3e>] driver_attach+0x1e/0x20
  [<ffffffff8143d461>] bus_add_driver+0x151/0x270
  [<ffffffff8143eabc>] driver_register+0x8c/0xd0
  [<ffffffff8138a2ed>] __pci_register_driver+0x5d/0x60
  [<ffffffffa00b3c58>] drm_pci_init+0x58/0xf0 [drm]
  [<ffffffff8109296d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffffa02aa000>] ? 0xffffffffa02aa000
  [<ffffffffa02aa094>] i915_init+0x94/0x9b [i915]
  [<ffffffff81000423>] do_one_initcall+0x113/0x1f0
  [<ffffffff810a4b21>] ? rcu_read_lock_sched_held+0x61/0x90
  [<ffffffff811601dc>] ? kmem_cache_alloc_trace+0x1cc/0x280
  [<ffffffff8111110a>] do_init_module+0x60/0x1c8
  [<ffffffff810c731b>] load_module+0x1ceb/0x2410
  [<ffffffff810c3a60>] ? store_uevent+0x40/0x40
  [<ffffffff811763d1>] ? kernel_read+0x41/0x60
  [<ffffffff810c7c1d>] SYSC_finit_module+0x8d/0xa0
  [<ffffffff810c7c4e>] SyS_finit_module+0xe/0x10
  [<ffffffff815f1e97>] entry_SYSCALL_64_fastpath+0x12/0x6f
 ---[ end trace 1149e9ab3695a423 ]---
 ------------[ cut here ]------------

Changes since v1:
- Clear state before calling any function after .crtc_disable.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56D6FD21.7020907@linux.intel.com
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
2016-03-10 14:17:01 +01:00
Lionel Landwerlin
562c5b4d89 drm: fix blob pointer check
Check properly that the allocated blob's pointer is valid.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes: 5488dc16fd ("drm: introduce pipe color correction properties")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1457611461-9116-1-git-send-email-lionel.g.landwerlin@intel.com
2016-03-10 13:47:30 +01:00
Ville Syrjälä
29ceb0e6c8 drm/i915: s/crtc_state/old_crtc_state/ in intel_atomic_commit()
Avoid some head spinning by renaming the crtc_state variable to
old_crtc_state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-03-10 14:02:15 +02:00
Ville Syrjälä
2622a08108 drm/i915: Wait for vblank after cxsr disable in pre_plane_update
We must wait for the hardware to exit cxsr before doing the plane
update, so add the missing vblank wait to pre_plane_update after
disabling cxsr.

We have the wait for vblank in the pre_disable_primary hook, but not in
the pre_plane_update hook. Just move the code from (and comment) from
pre_disable_primary into pre_plane_update. Well, we still have to keep
it in pre_disable_primary for these strange _noatomic codepaths, so
let's do another version of pre_disable_primary for those. Also toss
in some FIXMEs in the hope that someone will eventually clean up this
pre_disable_primary mess.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-03-10 14:02:15 +02:00
Ville Syrjälä
caed361d83 drm/i915: Fix watermarks for VLV/CHV
commit 92826fcdfc ("drm/i915: Calculate watermark related members in the crtc_state, v4.")
broke thigns by removing the pre vs. post wm update distinction. We also
lost the pre plane wm update entirely for VLV/CHV from the crtc enable
path.

This caused underruns on modeset and plane enable/disable on CHV,
and often those can lead to a dead pipe.

So let's bring back the pre vs. post thing, and let's toss in an
explicit wm update to valleyview_crtc_enable() to avoid having to
put it into the common code.

This is more or less a partial revert of the offending commit.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 92826fcdfc ("drm/i915: Calculate watermark related members in the crtc_state, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-03-10 14:02:03 +02:00
Ville Syrjälä
9f6151c903 drm/i915: Pass the correct crtc state to .update_plane()
Pass the current crtc state, not the old crtc state, to the
.update_plane() hook.

Noticed on BSW when PRIMSIZE was getting programmed to a stale value
which produced utter garbage on screen eg. wwhen going from 1920x1080
to 1024x768.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: a758e68458 ("drm/i915: Do not use commit_plane for sprite planes.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-03-10 13:49:31 +02:00
Ville Syrjälä
dcb2e993f3 Revert "drm/i915: Enable PSR by default on Valleyview and Cherryview."
This reverts commit a38c274faa.

PSR causes all sorts of vblank wait timeouts and whanot on CHV. Disable
it again.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a38c274faa ("drm/i915: Enable PSR by default on Valleyview and Cherryview.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-2-git-send-email-ville.syrjala@linux.intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/1457543247-13987-2-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-03-10 13:49:22 +02:00
Linus Torvalds
a6e434e955 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "A few imx fixes I missed from a couple of weeks ago, they still aren't
  that big and fix some regression and a fail to boot problem.

  Other than that, a couple of regression fixes for radeon/amdgpu, one
  regression fix for vmwgfx and one regression fix for tda998x"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/radeon/pm: adjust display configuration after powerstate"
  drm/amdgpu/dp: add back special handling for NUTMEG
  drm/radeon/dp: add back special handling for NUTMEG
  drm/i2c: tda998x: Choose between atomic or non atomic dpms helper
  drm/vmwgfx: Add back ->detect() and ->fill_modes()
  drm/radeon: Fix error handling in radeon_flip_work_func.
  drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
  drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats
  drm/imx: notify DRM core about CRTC vblank state
  gpu: ipu-v3: Reset IPU before activating IRQ
  gpu: ipu-v3: Do not bail out on missing optional port nodes
2016-03-09 19:12:37 -08:00
Christian König
32b41ac21f drm/amdgpu: Revert "add mutex for ba_va->valids/invalids"
Not needed any more because we need to protect the elements on the list anyway.

This reverts commit 38bf516c75b4ef0f5c716e05fa9baab7c52d6c39.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-09 13:04:02 -05:00
Christian König
2025021582 drm/amdgpu: Revert "add lock for interval tree in vm"
Not needed any more because we need to protect the elements on the list anyway.

This reverts commit fe237ed7efec8ac147a4572fdf81173a7f8ddda7.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-09 13:04:02 -05:00
Christian König
e17841b975 drm/amdgpu: Revert "add spin lock to protect freed list in vm (v3)"
Not needed any more because we need to protect the elements on the list anyway.

This reverts commit dae6ecf9e6c9b677e577826c3ac665c6dd9c490b.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-09 13:04:01 -05:00
Christian König
b5a5ec5504 drm/amdgpu: reserve the PD during unmap and remove
We not only need to protect the mapping tree and freed list itself,
but also the items on those list.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-09 13:04:01 -05:00
Felix Kuehling
fb29b57c34 drm/amdgpu: Fix two bugs in amdgpu_vm_bo_split_mapping
Off-by-one: last is inclusive, so the maximum is start + max_size - 1
Wrong unit: addr is in bytes, max_size is in pages

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-03-09 13:04:00 -05:00
Mario Kleiner
459ee1c3fd drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards.
As observed on Apple iMac10,1, DCE-3.2, RV-730,
link rate of 2.7 Ghz is not selected, because
the args.v1.ucConfig flag setting for 2.7 Ghz
gets overwritten by a following assignment of
the transmitter to use.

Move link rate setup a few lines down to fix this.
In practice this didn't have any positive or
negative effect on display setup on the tested
iMac10,1 so i don't know if backporting to stable
makes sense or not.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-03-09 13:04:00 -05:00
Alex Deucher
bedf2a65c1 drm/amdgpu: disable runtime pm on PX laptops without dGPU power control
Some PX laptops don't provide an ACPI method to control dGPU power.  On
those systems, the driver is responsible for handling the dGPU power
state.  Disable runtime PM on them until support for this is implemented.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-03-09 13:03:52 -05:00
Alex Deucher
e64c952efb drm/radeon: disable runtime pm on PX laptops without dGPU power control
Some PX laptops don't provide an ACPI method to control dGPU power.  On
those systems, the driver is responsible for handling the dGPU power
state.  Disable runtime PM on them until support for this is implemented.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2016-03-09 13:03:19 -05:00
Ville Syrjälä
8b1f165a4a drm/i915: Actually retry with bit-banging after GMBUS timeout
After the GMBUS transfer times out, we set force_bit=1 and
return -EAGAIN expecting the i2c core to call the .master_xfer
hook again so that we will retry the same transfer via bit-banging.
This is in case the gmbus hardware is somehow faulty.

Unfortunately we left adapter->retries to 0, meaning the i2c core
didn't actually do the retry. Let's tell the core we want one retry
when we return -EAGAIN.

Note that i2c-algo-bit also uses this retry count for some internal
retries, so we'll end up increasing those a bit as well.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: bffce907d6 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2016-03-09 17:06:50 +02:00
Luis R. Rodriguez
f6e45661f9 dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()
Rename dma_*_writecombine() to dma_*_wc(), so that the naming
is coherent across the various write-combining APIs. Keep the
old names for compatibility for a while, these can be removed
at a later time. A guard is left to enable backporting of the
rename, and later remove of the old mapping defines seemlessly.

Build tested successfully with allmodconfig.

The following Coccinelle SmPL patch was used for this simple
transformation:

@ rename_dma_alloc_writecombine @
expression dev, size, dma_addr, gfp;
@@

-dma_alloc_writecombine(dev, size, dma_addr, gfp)
+dma_alloc_wc(dev, size, dma_addr, gfp)

@ rename_dma_free_writecombine @
expression dev, size, cpu_addr, dma_addr;
@@

-dma_free_writecombine(dev, size, cpu_addr, dma_addr)
+dma_free_wc(dev, size, cpu_addr, dma_addr)

@ rename_dma_mmap_writecombine @
expression dev, vma, cpu_addr, dma_addr, size;
@@

-dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size)
+dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size)

We also keep the old names as compatibility helpers, and
guard against their definition to make backporting easier.

Generated-by: Coccinelle SmPL
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bhelgaas@google.com
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: dhowells@redhat.com
Cc: julia.lawall@lip6.fr
Cc: konrad.wilk@oracle.com
Cc: linux-fbdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: luto@amacapital.net
Cc: mst@redhat.com
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Cc: vinod.koul@intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-09 14:57:51 +01:00
Ander Conselvan de Oliveira
a3c988ea06 drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code
Include DPLL0 in the managed dplls for SKL/KBL. While it has to be kept
enabled because of it driving CDCLK, it is better to special case that
inside the DPLL code than in the higher level.

v2: Use INTEL_DPLL_ALWAYS_ON flag. (Ander)

v3: Remove extremely paranoid WARN_ONs. (Maarten)
    Handle DPLL0 in skylake_get_ddi_pll() properly. (Ander)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-14-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-03-09 11:55:32 +02:00
Ander Conselvan de Oliveira
9d16da65bf drm/i915: Manage HSW/BDW LCPLLs with the shared dpll interface
Manage the LCPLLs used with DisplayPort, so that all the HSW/BDW DPLLs
are managed by the shared dpll code.

v2: Introduce INTEL_DPLL_ALWAYS_ON flag to please state checker. (Ander)

v3: Initialize pll->flags in intel_shared_dpll_init(). (Ander)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-13-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-03-09 11:55:32 +02:00
Ander Conselvan de Oliveira
34177c249a drm/i915: Move BXT pll configuration logic to intel_dpll_mgr.c
Move the code for configurating BXT plls into the shared dpll code, so
that the platform specific details are hidden behind that interface.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-12-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-03-09 11:55:31 +02:00
Ander Conselvan de Oliveira
304b65cbdc drm/i915: Move SKL/KLB pll selection logic to intel_dpll_mgr.c
Move the code for selecting plls for SKL/KLB into the shared dpll code,
so that the platform specific details are hidden behind that interface.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457451987-17466-11-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-03-09 11:55:31 +02:00