As well as enabling the vblank interrupt. These shouldn't take any
significant amount of time, but at least pinning the BO has actually been
seen to fail in practice before, in which case we need to let userspace
know about it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 3.16-rc1 we have this new failure:
When the userspace XOrg ddx schedules vblank events to
trigger deferred kms-pageflips, e.g., via the OML_sync_control
extension call glXSwapBuffersMscOML(), or if a glXSwapBuffers()
is called immediately after completion of a previous swapbuffers
call, e.g., in a tight rendering loop with minimal rendering,
it happens frequently that the pageflip ioctl() is executed
within the same vblank in which a previous kms-pageflip completed,
or - for deferred swaps - always one vblank earlier than requested
by the client app.
This causes premature pageflips and detection of failure by
the ddx, e.g., XOrg log warnings like...
"(WW) RADEON(1): radeon_dri2_flip_event_handler: Pageflip
completion event has impossible msc 201025 < target_msc 201026"
... and error/invalid return values of glXWaitForSbcOML() and
Intel_swap_events extension.
Reason is the new way in which kms-pageflips are programmed
since 3.16.
This commit changes the time window in which the hw can
execute pending programmed pageflips. Before, a pending flip
would get executed anywhere within the vblank interval. Now
a pending flip only gets executed at the leading edge of
vblank (start of front porch), making sure that a invocation
of the pageflip ioctl() within a given vblank interval will
only lead to pageflip completion in the following vblank.
Tested to death on a DCE-4 card.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the value in the scratch register is 0, set it to the
max level. This fixes an issue where the console fb blanking
code calls back into the backlight driver on unblank and then
sets the backlight level to 0 after the driver has already
set the mode and enabled the backlight.
bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=81382https://bugs.freedesktop.org/show_bug.cgi?id=70207
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: David Heidelberger <david.heidelberger@ixit.cz>
Cc: stable@vger.kernel.org
In some cases we fetch the edid in the detect() callback
in order to determine what sort of monitor is connected.
If that happens, don't fetch the edid again in the get_modes()
callback or we will leak the edid.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
It reverts commit c745fe611c now that
Cayman is stable since VDDCI fix. Spread spectrum was not the culprit.
This depends on b0880e87c1
(drm/radeon/dpm: fix vddci setup typo on cayman).
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Need to use the RREG32_SMC() accessor since the register
is an smc indirect index.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If there are error flags in the aux transaction return
-EIO rather than -EBUSY. -EIO restarts the whole transaction
while -EBUSY jus retries. Fixes problematic aux transfers.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80684
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fixes for regressions and black screens, cc: stable where applicapable
(the last minute rebase was to sprinkle missing stable tags). A bit more
than what I'd wish for, but excluding vlv and that the first 3 patches are
just quirks for 1 regression it looks much better.
There's still a "oops, lost dithering" issue on older platforms open. I'm
working on a fix for that now but didn't want to delay this pile.
* tag 'drm-intel-fixes-2014-07-09' of git://anongit.freedesktop.org/drm-intel:
drm/i915/vlv: T12 eDP panel timing enforcement during reboot
drm/i915: Only unbind vgacon, not other console drivers
drm/i915: Don't clobber the GTT when it's within stolen memory
drm/i915/vlv: Update the DSI ULPS entry/exit sequence
drm/i915/vlv: DPI FIFO empty check is not needed
drm/i915: Toshiba CB35 has a controllable backlight
drm/i915: Acer C720 and C720P have controllable backlights
drm/i915: quirk asserts controllable backlight presence, overriding VBT
A couple of DP regression fixes, kepler memory reclocking fixes, and a fix for an annoying display issue that can pop up on resume.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/ram: fix test for gpio presence
drm/nouveau/dp: workaround broken display
drm/nouveau/dp: fix required link bandwidth calculations
drm/nouveau/kms: restore fbcon after display has been resumed
drm/nv50-/kms: pass a non-zero value for head to sor dpms methods
drm/nouveau/fb: Prevent inlining of ramfuc_reg
drm/gk104/ram: bash mpll bit 31 on
The panel power sequencer on vlv doesn't appear to accept changes to its
T12 power down duration during warm reboots. This change forces a delay
for warm reboots to the T12 panel timing as defined in the VBT table for
the connected panel.
Ver2: removed redundant pr_crit(), commented magic value for pp_div_reg
Ver3: moved SYS_RESTART check earlier, new name for pp_div.
Ver4: Minor issue changes
Ver5: Move registration of reboot notifier to edp_connector_init,
Added warning comment to handler about lack of PM notification.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The console subsystem only provides a function to switch to a given
console, but we want to actually only switach away from vgacon.
Unconditionally switching to the dummy console resulted in switching
away from fbcon in multi-gpu setups when other gpu drivers are loaded
before i915.
Then either the reinitialization of fbcon when i915 registers its
fbdev emulation or the teardown of the fbcon driver killed the
machine. So only switch to the dummy console when it's required.
Kudos to Chris for the original idea, I've only refined it a bit to
still unregister vgacon even when it's currently unused.
This regression has been introduced in
commit a4de05268e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jun 5 16:20:46 2014 +0200
drm/i915: Kick out vga console
Reported-and-tested-by: Ed Tomlinson <edt@aei.ca>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On most gen2-4 platforms the GTT can be (or maybe always is?)
inside the stolen memory region. If that's the case, reduce the
size of the stolen memory appropriately to make make sure we
don't clobber the GTT.
v2: Deal with gen4 36 bit physical address
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80151
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We should keep DEVICE_READY bit set in the ULPS enter sequence. In
exit sequence also we should set DEVICE_READY, but thats causing
blankout for me. Also exit sequence is simplified as per hw team
recommendation.
This should fix -
[drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While sending DPI SHUTDOWN command, we cannot wait for FIFO empty as
pipes are not disabled at that time. In case of MIPI we disable port
first and send SHUTDOWN command while pipe is still running and FIFOs
will not be empty, causing spurious error log
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Toshiba CB35 Chromebook (with Celeron 2955U CPU) has a controllable
backlight although its VBT reports otherwise. Apply quirk to ignore the
backlight presence check during backlight setup.
Patch tested by author on Toshiba CB35.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # 3.15 only
[danvet: Add cc: stable because the regressing commit is in 3.15.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Acer C720 and C720P Chromebooks (with Celeron 2955U CPU) have a
controllable backlight although their VBT reports otherwise. Apply quirk
to ignore the backlight presence check during backlight setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813
Tested-by: James Duley <jagduley@gmail.com>
Tested-by: Michael Mullin <masmullin@gmail.com>
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # 3.15 only
[danvet: Add cc: stable because the regressing commit is in 3.15.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit c675949ec5
Author: Jani Nikula <jani.nikula@intel.com>
Date: Wed Apr 9 11:31:37 2014 +0300
drm/i915: do not setup backlight if not available according to VBT
caused a regression on machines with a misconfigured VBT. Add a quirk to
assert the presence of a controllable backlight. Use it to ignore the VBT
backlight presence check during backlight setup.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813
Tested-by: James Duley <jagduley@gmail.com>
Tested-by: Michael Mullin <masmullin@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org # 3.15 only
[danvet: Add cc: stable because the regressing commit is in 3.15.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Nothing major, but potentially annoying and worthwhile to fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=otbz
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix a number of zero-day bugs, mostly found with module test scripts.
Nothing major, but potentially annoying and worthwhile to fix"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (adc128d818) Drop write support on inX_input attributes
hwmon: (emc2103) Clamp limits instead of bailing out
hwmon: (adm1031) Fix writes to limit registers
hwmon: (adm1021) Fix cache problem when writing temperature limits
hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div
hwmon: (amc6821) Fix permissions for temp2_input
hwmon: (ntc_thermistor) Correct information printed during probe
The display in fdo#76483 pulses the hotplug line for link retraining
after we cut power to the main link on the source, even while it's
in D3.
fdo#76483
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Under some complicated circumstances (boot, suspend, resume, attach
second display, suspend, resume, suspend, detach second display,
resume, suspend, attach second display, resume), the fb_set_suspend()
call can somehow result in a modeset being attempted before we're
ready for it and things blow up in fun ways.
Running display init first fixes the issue.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's Apple machines out there which (probably completely arbitrarily)
restrict each output path to a particular head. This causes us to not
be able to locate the output data needed to power on/off the DP output
correctly.
We fix this by passing in a head index we know is valid (as opposed to
"head 0").
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When gcc 4.8 inlines this function, it eats up 16 bytes on the stack
every time. Eventually we hit warnings because our stack grew too
much:
ramnve0.c:1383:1: error: the frame size of 1496 bytes is larger than
1024 bytes
We fix this by preventing inlining for this function.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pull thermal fixes from Zhang Rui:
"Specifics:
- update Email address of Thermal subsystem maintainer Eduardo
Valentin.
- fix a problem that unloading thermal module results in kernel crash
because a non-exist device file is removed on thermal unload.
- fix a problem that critical trip point is set wrongly on latest
i.MX6 SOC and results in system critical shutdown.
- a couple of fixes to Tmon tool, of-thermal code and ti thermal
driver"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
tmon: set umask to a reasonable value
tmon: Check log file for common secuirty issues
tools/thermal: tmon: fix compilation errors when building statically
thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked
Thermal: imx: correct critical trip temperature setting
thermal: Bind cooling devices with the correct arguments
thermal: Add braces around suspect code
thermal: hwmon: Make the check for critical temp valid consistent
MAINTAINERS: Update Eduardo Valentin's email address
Pull HID fixes from Jiri Kosina:
"A few tiny HID subsystem fixes for 3.16"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: use multi input quirk for 22b9:2968
HID: sensor-hub: fix potential memory leak
HID: usbhid: quirk for PM1610 and PM1640 Touchscreen.
HID: rmi: Protect PM-only functions by #ifdef CONFIG_PM
HID: sensor-hub: introduce Kconfig dependency on IOMEM
HID: sensor-hub: make dyn_callback_lock IRQ-safe
the errorpath in probe().
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ya5E
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two fixes for the pin control subsystem, both relating to the error
path in probe()
I'm a bit snowed under by mail but these have boiled in linux-next and
should propagate to you"
* tag 'pinctrl-v3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: berlin: fix an error code in berlin_pinctrl_probe()
pinctrl: sunxi: Fix potential null pointer dereference
Writes into input registers doesn't make sense, even more so since
the writes actually ended up writing into the maximum limit registers.
Drop it.
Cc: stable@vger.kernel.org
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
It is customary to clamp limits instead of bailing out with an error
if a configured limit is out of the range supported by the driver.
This simplifies limit configuration, since the user will not typically
know chip and/or driver specific limits.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Upper limit for write operations to temperature limit registers
was clamped to a fractional value. However, limit registers do
not support fractional values. As a result, upper limits of 127.5
degrees C or higher resulted in a rounded limit of 128 degrees C.
Since limit registers are signed, this was stored as -128 degrees C.
Clamp limits to (-55, +127) degrees C to solve the problem.
Value on writes to auto_temp[12]_min and auto_temp[12]_max were not
clamped at all, but masked. As a result, out-of-range writes resulted
in a more or less arbitrary limit. Clamp those attributes to (0, 127)
degrees C for more predictable results.
Cc: Axel Lin <axel.lin@ingics.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Important bug fix for parsing 64-bit addresses on 32-bit platforms.
Without this patch the kernel will try to use memory ranges that cannot
be reached.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7+H1
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux
Pull devicetree bugfix from Grant Likely:
"Important bug fix for parsing 64-bit addresses on 32-bit platforms.
Without this patch the kernel will try to use memory ranges that
cannot be reached"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Check for phys_addr_t overflows in early_init_dt_add_memory_arch
This is a set of 13 fixes, a MAINTAINERS update and a sparse update. The
fixes are mostly correct value initialisations, avoiding NULL derefs and some
uninitialised pointer avoidance.
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJTuNEhAAoJEDeqqVYsXL0MYC4H/2gpxHA9rELiqPRLJGNjt9v3
YlGrIwVAAdYLBSgwtkpAYj6oDJtwRmZvP3Saj2n5Lga+32mgFsPjvy+JsM3O41SL
k5QRlAs10wMbOB/dSoGxFsKdGnig4NolCIe5p0MGQvAbcCvh9z2Tr876ssvSfMCh
1mh0xmTCIutD7R2f5WjRckA+HZo+qmLLz5ZyogDasI3mSRAHjcZ+j5HdWBQbEsag
U6lPDR5VpUjGpigwJ+BPWwKTbIAIW1v2TB1YjWSHr5h2QPLBa+hfbyc15S1AjsGb
9F5/L432yk4UXQUKyKIpCKi8rDCoioM8dt8ofjjTNfNNjDlYRRHKutalef1yOw8=
=HPXQ
-----END PGP SIGNATURE-----
Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of 13 fixes, a MAINTAINERS update and a sparse update.
The fixes are mostly correct value initialisations, avoiding NULL
derefs and some uninitialised pointer avoidance.
All the patches have been incubated in -next for a few days. The
final patch (use the scsi data buffer length to extract transfer size)
has been rebased to add a cc to stable, but only the commit message
has changed"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] use the scsi data buffer length to extract transfer size
virtio-scsi: fix various bad behavior on aborted requests
virtio-scsi: avoid cancelling uninitialized work items
ibmvscsi: Add memory barriers for send / receive
ibmvscsi: Abort init sequence during error recovery
qla2xxx: Fix sparse warning in qla_target.c.
bnx2fc: Improve stats update mechanism
bnx2fc: do not scan uninitialized lists in case of error.
fc: ensure scan_work isn't active when freeing fc_rport
pm8001: Fix potential null pointer dereference and memory leak.
MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs
be2iscsi: remove potential junk pointer free
be2iscsi: add an missing goto in error path
scsi_error: set DID_TIME_OUT correctly
scsi_error: fix invalid setting of host byte
Pull drm fixes from Dave Airlie:
"i915, tda998x and vmwgfx fixes,
The main one is i915 fix for missing VGA connectors, along with some
fixes for the tda998x from Russell fixing some modesetting problems.
(still on holidays, but got a spare moment to find these)"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix incorrect write to read-only register v2:
drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin
drm/i915: only apply crt_present check on VLV
drm/i915: Wait for vblank after enabling the primary plane on BDW
drm/i2c: tda998x: add some basic mode validation
drm/i2c: tda998x: faster polling for edid
drm/i2c: tda998x: move drm_i2c_encoder_destroy call
Pull irq fixes from Thomas Gleixner:
"A few minor fixlets in ARM SoC irq drivers and a fix for a memory leak
which I introduced in the last round of cleanups :("
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix memory leak when calling irq_free_hwirqs()
irqchip: spear_shirq: Fix interrupt offset
irqchip: brcmstb-l2: Level-2 interrupts are edge sensitive
irqchip: armada-370-xp: Mask all interrupts during initialization.
Fixes for 3.16-rc3; most importantly Jesse brings back VGA he took away
on a bunch of machines. Also a vblank fix for BDW and a power workaround
fix for VLV.
* tag 'drm-intel-fixes-2014-07-03' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin
drm/i915: only apply crt_present check on VLV
drm/i915: Wait for vblank after enabling the primary plane on BDW
We are returning success here because PTR_ERR(NULL) is zero. We should
be returning -ENODEV.
Fixes: 3de68d331c ('pinctrl: berlin: add the core pinctrl driver for Marvell Berlin SoCs')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=wZau
-----END PGP SIGNATURE-----
Merge tag 'md/3.16-fixes' of git://neil.brown.name/md
Pull md bugfixes from Neil Brown:
"Two minor bugfixes for md in 3.16"
* tag 'md/3.16-fixes' of git://neil.brown.name/md:
md: flush writes before starting a recovery.
md: make sure GET_ARRAY_INFO ioctl reports correct "clean" status
This contains a few fixes for HD-audio: yet another Dell headset pin
quirk, a fixup for Thinkpad T540P, and an improved fix for
Haswell/Broadwell HDMI clock setup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=zvT1
-----END PGP SIGNATURE-----
Merge tag 'sound-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a few fixes for HD-audio: yet another Dell headset pin
quirk, a fixup for Thinkpad T540P, and an improved fix for
Haswell/Broadwell HDMI clock setup"
* tag 'sound-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - restore BCLK M/N value as per CDCLK for HSW/BDW display HDA controller
drm/i915: provide interface for audio driver to query cdclk
ALSA: hda - Add a fixup for Thinkpad T540p
ALSA: hda - Add another headset pin quirk for some Dell machines
For Haswell and Broadwell, if the display power well has been disabled,
the display audio controller divider values EM4 M VALUE and EM5 N VALUE
will have been lost. The CDCLK frequency is required for reprogramming them
to generate 24MHz HD-A link BCLK. So provide a private interface for the
audio driver to query CDCLK.
This is a stopgap solution until a more generic interface between audio
and display drivers has been implemented.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here's a round of USB bugfixes, quirk additions, and new device ids for
3.16-rc4. Nothing major in here at all, just a bunch of tiny changes.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlO1+wwACgkQMUfUDdst+ylcuACfbIytKMfxNcmq2xG6AExXbVSl
IQAAnAvv4QjqzbtSVWaNZB/Kkxzh4xeN
=Igpa
-----END PGP SIGNATURE-----
Merge tag 'usb-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB bugfixes from Greg KH:
"Here's a round of USB bugfixes, quirk additions, and new device ids
for 3.16-rc4. Nothing major in here at all, just a bunch of tiny
changes. All have been in linux-next with no reported issues"
* tag 'usb-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
usb: chipidea: udc: delete td from req's td list at ep_dequeue
usb: Kconfig: make EHCI_MSM selectable for QCOM SOCs
usb-storage/SCSI: Add broken_fua blacklist flag
usb: musb: dsps: fix the base address for accessing the mode register
tools: ffs-test: fix header values endianess
usb: phy: msm: Do not do runtime pm if the phy is not idle
usb: musb: Ensure that cppi41 timer gets armed on premature DMA TX irq
usb: gadget: gr_udc: Fix check for invalid number of microframes
usb: musb: Fix panic upon musb_am335x module removal
usb: gadget: f_fs: resurect usb_functionfs_descs_head structure
Revert "tools: ffs-test: convert to new descriptor format fixing compilation error"
xhci: Fix runtime suspended xhci from blocking system suspend.
xhci: clear root port wake on bits if controller isn't wake-up capable
xhci: correct burst count field for isoc transfers on 1.0 xhci hosts
xhci: Use correct SLOT ID when handling a reset device command
MAINTAINERS: update e-mail address
usb: option: add/modify Olivetti Olicard modems
USB: ftdi_sio: fix null deref at port probe
MAINTAINERS: drop two usb-serial subdriver entries
USB: option: add device ID for SpeedUp SU9800 usb 3g modem
...
Nothing major here, just 4 small bugfixes that resolve some issues
reported for the IIO (staging and non-staging) and the tidspbridge
driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlO1+gYACgkQMUfUDdst+ylqPgCdGlfPLOaFYI/IlOUDbdAG7YRP
QCIAn0U3wnG4QjVAwmzCHlcPAtFt4un9
=kDww
-----END PGP SIGNATURE-----
Merge tag 'staging-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver bugfixes from Greg KH:
"Nothing major here, just 4 small bugfixes that resolve some issues
reported for the IIO (staging and non-staging) and the tidspbridge
driver"
* tag 'staging-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: tidspbridge: fix an erroneous removal of parentheses
iio: of_iio_channel_get_by_name() returns non-null pointers for error legs
staging: iio/ad7291: fix error code in ad7291_probe()
iio:adc:ad799x: Fix reading and writing of event values, apply shift
The module test script for the adm1021 driver exposes a cache problem
when writing temperature limits. temp_min and temp_max are expected
to be stored in milli-degrees C but are stored in degrees C.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
