Commit graph

560,906 commits

Author SHA1 Message Date
Courtney Cavin
43fde00b26 dt-binding: power: Add Qualcomm SMBB binding
Add the Qualcomm Switch-Mode Battery Charger and Boost device tree
binding.

Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 13:35:30 +02:00
Javier Martinez Canillas
da42bbd99d power: Remove unnecessary MODULE_ALIAS() for I2C drivers
These drivers already have an I2C device id table that is used to create
module aliases and the used MODULE_ALIAS() was either already in the I2C
table so it was redundant or wasn't a valid I2C id so it was never used.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 13:35:30 +02:00
Milo Kim
9615a29932 power:lp8727_charger: parsing child node after getting debounce-ms
According to lp8727 bindings[*], charging parameter is optional.
So parsing can be skipped in case those properties are undefined.
However, 'debounce-ms' should be read prior to checking the properties.
Otherwise, 'debounce-ms' property will be ignored even it is configured
inside the DT.
So, counting child is processed after updating 'debounce-ms'.

[*] Documentation/devicetree/bindings/power_supply/lp8727_charger.txt

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 13:35:29 +02:00
Milo Kim
87d931d569 power:lp8727_charger: use the private data instead of updating I2C device platform data
Currently, lp8727 charger driver parses the DT and copies values into the
'cl->dev.platform_data' if 'of_node' exists.
This may have architectural issue. Platform data is configurable through
the DT or I2C board info inside the platform area.
However, lp8727 driver changes this configuration when it is loaded.

The driver should get data from the platform side and use the private
data, 'lp8727_chg->pdata' instead of changing the original platform data.

_probe() procedure is changed as follows.
  1. lp8727_parse_dt() returns the pointer of lp8727_platform_data.
     The driver uses this allocated platform data. So it should keep
     original platform data, 'dev->platform_data'.
  2. In _probe(), check the return value of lp8727_parse_dt().
     If an error is found, then exit as PTR_ERR(pdata).
  3. If 'of_node' is not found, then the driver just gets the platform data
     from the I2C device structure.
  4. Map the platform data to private data structure.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 13:35:29 +02:00
Mark Brown
c01576c8f3 power: wm831x_power: Convert to devm_kzalloc()
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 13:35:28 +02:00
Hans de Goede
69fb4dcada power: Add an axp20x-usb-power driver
This adds a driver for the usb power_supply bits of the axp20x PMICs.

I initially started writing my own driver, before coming aware of
Bruno Prémont's excellent earlier RFC with a driver for this.

My driver was lacking CURRENT_MAX and VOLTAGE_MIN support Bruno's
drvier has, so I've copied the code for those from his driver.

Note that the AC-power-supply and battery charger bits will need separate
drivers. Each one needs its own devictree child-node so that other
devicetree nodes can reference the right power-supply, and thus each one
will get its own mfd-cell / platform_device and platform-driver.

Cc: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 13:35:28 +02:00
Hans de Goede
264905209a ARM: dts: Add binding documentation for AXP20x pmic usb power supply
Add binding documentation for the usb power supply part of the AXP20x pmic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-22 13:35:16 +02:00
Zhen Lei
571af55a31 time: Fix spelling in comments
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Xinwei Hu <huxinwei@huawei.com>
Cc: Xunlei Pang <pang.xunlei@linaro.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1440484973-13892-1-git-send-email-thunder.leizhen@huawei.com
[ Fixed yet another typo in one of the sentences fixed. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-22 12:54:23 +02:00
Geert Uytterhoeven
afbbd23381 irqchip/gic: Document optional Clock and Power Domain properties
Depending on the GIC variant, the GIC module has one or more clock
inputs. Document the optional "clocks" and "clock-names" properties,
and their possible values, based on the Technical Reference Manuals.
optional.

Add the optional "power-domains" property.

This will allow to describe in DT the relationship between the GIC and
the Clock and/or Power Domain topology on SoCs where this is relevant
and needed for proper operation.

Note: As the current GIC driver doesn't support Runtime PM yet, PM
Domain constraints must be handled elsewhere in e.g. platform code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Link: http://lkml.kernel.org/r/1442261204-30931-3-git-send-email-geert%2Brenesas@glider.be
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 12:51:18 +02:00
Geert Uytterhoeven
8709b9eb37 irqchip/gic: Add arm,pl390 support
Add support for the PrimeCell® Generic Interrupt Controller (PL390) to
the GIC DT bindings and driver.

Currently the GIC driver treats this GIC variant the same as other GIC
variants, but there are differences in hardware topology (e.g. clock
inputs).

Sort the list of compatible values while we're at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Link: http://lkml.kernel.org/r/1442261204-30931-2-git-send-email-geert%2Brenesas@glider.be
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 12:51:18 +02:00
Thomas Gleixner
2a1d3ab898 genirq: Handle force threading of irqs with primary and thread handler
Force threading of interrupts does not really deal with interrupts
which are requested with a primary and a threaded handler. The current
policy is to leave them alone and let the primary handler run in
interrupt context, but we set the ONESHOT flag for those interrupts as
well.

Kohji Okuno debugged a problem with the SDHCI driver where the
interrupt thread waits for a hardware interrupt to trigger, which can't
work well because the hardware interrupt is masked due to the ONESHOT
flag being set. He proposed to set the ONESHOT flag only if the
interrupt does not provide a thread handler.

Though that does not work either because these interrupts can be
shared. So the other interrupt would rightfully get the ONESHOT flag
set and therefor the same situation would happen again.

To deal with this proper, we need to force thread the primary handler
of such interrupts as well. That means that the primary interrupt
handler is treated as any other primary interrupt handler which is not
marked IRQF_NO_THREAD. The threaded handler becomes a separate thread
so the SDHCI flow logic can be handled gracefully.

The same issue was reported against 4.1-rt.

Reported-and-tested-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Reported-By: Michal Smucr <msmucr@gmail.com>
Reported-and-tested-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1509211058080.5606@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 12:39:57 +02:00
Borislav Petkov
7ac8bf9bc9 EDAC: Carve out debugfs functionality
... into a separate compilation unit and drop a couple of
CONFIG_EDAC_DEBUG ifdefferies. Rename edac_create_debug_nodes() to
edac_create_debugfs_nodes(), while at it.

No functionality change.

Cc: <linux-edac@vger.kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22 12:29:46 +02:00
Amitkumar Karwar
f0ef67485f Bluetooth: btmrvl: add sd8997 chipset support
This patch adds support for Marvell's new chipset SD8997.
Register offsets and supported feature flags are updated.

Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:24 +02:00
Amitkumar Karwar
53d6cfa581 Bluetooth: btmrvl: remove extra space in cast
Coding style fix, extra spaces are removed to make casting
consistent.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:24 +02:00
Alexander Aring
7d840545e5 mrf24j40: replace magic numbers
This patch replaces some magic numbers with defines for register bits,
mask and shifts.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
afaf7fdedb mrf24j40: change irq trigger type behaviour
This patch changes the irq trigger type value while calling
devm_request_irq by using IRQF_TRIGGER_LOW when no irq type was given.
Additional we add support for change the irq polarity while hw init if
high level or low level triggered irq type are given.

For rising edge triggered irq's the mrf24j40 can't deal with that, this
races at position of tx completion irq, while the irq is disabled we
readout the irq status registers. This will resets the irq line so other
irq's can occur. Wile readout the irq status register the irq is still
disabled and edge triggered interrupts will be ignored.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
8ba4041740 mrf24j40: add promiscuous mode support
This patch adds support for promiscuous mode by setting promiscuous (no
frame filtering), disable automatic ack handling and not filtering
frames where the crc is invalid.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
00250f7889 mrf24j40: add tx power support
This patch supports setting of transmit power for the mrf24j40ma
transceiver only. The mrf24j40mc has some amplifier to change the
transmit power, I am currently not sure how the mapping for this
amplifier looks like.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
e33a0f96ac mrf24j40: add cca ed level support
This patch supports handling to set the cca energy detection level for
the mrf24j40 transceiver.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
f1d7812722 mrf24j40: add cca mode support
This patch supports cca mode handling for mrf24j40.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
2323cf38f9 mrf24j40: add csma params support
This patch adds supports to change the CSMA parameters. The datasheet
doesn't say anything about max_be value. Seems not configurable and we
assume the 802.15.4 default. But this value must exists because there is
a min_be value.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
374416112b mrf24j40: async interrupt handling
This patch removes the threaded irq handling and do a hardirq instead.
We need to switch to spi_async for this step for getting the irq status
register.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:23 +02:00
Alexander Aring
c91a301162 mrf24j40: rework rx handling to async rx handling
This patch prepares that we can do the receive handling inside interrupt
context by using spi_async. This is necessary for introduce a
non-threaded irq handling.

Also we drop the bit setting for "RXDECINV" at register "BBREG1", we do
a driectly full write of register "BBREG1", because it contains the bit
RXDECINV only.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:22 +02:00
Alexander Aring
6844a0e4de mrf24j40: rework tx handling to async tx handling
This patch reworks the current transmit API to spi_async handling. We
removed the error handling check, because mac802154 has no chance to
report it. Also the transmit timeout handling can't be handled by xmit
async handling, for this usecase we need to implement the netdev
watchdog. These are all unlikely cases which we drop now and should be
provided by netdev watchdog.

We also drop the bit setting for TXNACKREQ at register TXNCON, this is
not necessary. The TXNCON register should set only once for each frame,
previous settings doesn't matter.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:22 +02:00
Alexander Aring
79750ac425 ieee802154: add helpers for frame control checks
This patch introduce two static inline functions. The first to get the
frame control field from an sk_buff. The second is for checking on the
acknowledgment request bit on the frame control field. Later we can
introduce more functions to check on the frame control fields.

These will deprecate the current behaviour which requires a
host-byteorder conversion and manually bit handling.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:22 +02:00
Alexander Aring
ab40ff7508 mrf24j40: change to frame delivery with crc
This patch changes the frame delivery to mac802154 with crc. This is
useful for monitor interface types which deliver the crc to userspace.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:22 +02:00
Alexander Aring
42c7148e06 mrf24j40: use regmap for register access
This patch uses the regmap functions for transceiver register settings
where it's possible. This means everything except the hotpaths like
receive/transmit handling.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:22 +02:00
Alexander Aring
b015679200 mrf24j40: add regmap support
This patch introduce regmap support for short and long address space of
mrf24j40. It's only possible to use regmap_read/write/update_bits for
long address range. This is because I added lowlevel bus operation
because the write operation need to set the 12th bit to mark a register
write, but regmap only supports to set bits for register write access in
the first byte. We use other regmap register functions than
read/write/update_bits, so this should be fine.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:22 +02:00
Alexander Aring
554b49493b mrf24j40: add more register defines
For supporting regmap, this patch will add more register defines to
prepare a full register dump by regmap debugfs.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:22 +02:00
Alexander Aring
d344c91280 mrf24j40: add random extended addr generation
The mrf24j40 has no source to get a permanent extended address. This
patch will add a random generated permanent extended address source.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:21 +02:00
Alexander Aring
766928fbf8 mrf24j40: add default channel setting
Per default mrf24j40 has the channel 11 after reset. This patch adds the
right phy default value for the channel setting.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:21 +02:00
Alexander Aring
2e6fd648b6 mrf24j40: add device-tree support
This patch adds devicetree support to mrf24j40 with proper devicetree
compatible strings.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:21 +02:00
Alexander Aring
78aedb6bfa mrf24j40: remove spi settings overwrite
This patch removes spi settings while mrf24j40 probing. These settings
cannot be overwrite while device probing where spi controller should be
already configured. These settings need to be setup by device tree or
platform data.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:21 +02:00
Alexander Aring
a339e1849b mrf24j40: calling ieee802154_register_hw at last
The function ieee802154_register_hw should always called at last.
Currently we do hardware init and such things after register hardware
into the subsystem. It could be that the subsystem already call driver
operations while running hardware init.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:21 +02:00
Alexander Aring
b2cfdf3c67 mrf24j40: use ieee802154_alloc_hw for private data
This patch removes the own private dataroom allocation by calling
devm_kzalloc for devrec and assign this pointer to "devrec->hw->priv".
Instead we using like all other drivers ieee802154_alloc_hw and give the
size for the private driver dataroom at the first argument.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:20 +02:00
Alexander Aring
c9f883f6fe mrf24j40: cleanup define identation
This patch replaces the spaces after define by a tab.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:20 +02:00
Alexander Aring
57c1bc7ea8 at86rf230: support edge triggered irq
This patch adds support for edge triggered irq types. We remove the
locking for irq resources by enable/disable irq and allocate directly
some heap buffer at isr. We have still a enable/disable irq path but
this is for level-triggered irq's which need to be disabled until
spi_async clear the irq line.

There is usually a little race condition between "irq line cleared" and
"enable_irq". When in this time a edge triggered irq arrived, we will
not recognize this interrupt. This case can't happend at at86rf230. The
reason is that we unmask TRX_END irq's only which indicates a transmit
or receive completion, which depends on the current state.

On Transmit:

TRX_END arrived and transceiver is in TX_ARET_ON state again, in this
state no other TRX_END can happen until we leave the state.

On Receive:

This is protected with the RX_SAFE_MODE bit which leaves the transceiver
in RX_AACK_BUSY until we readed the framebuffer. In this state no other
TRX_END can happen.

Tested with RPi where I first detected issues between edge/level irq's.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:20 +02:00
Alexander Aring
02c7b69228 mac802154: tx: add warning if MTU exceeds
Sending over AF_PACKET RAW sockets we can sending frames which exceeds
MTU size. To handling it correct we need to change things in AF_PACKET
which knows on RAW sockets an additional FCS is set by hardware or
mac802154 transmit functionality.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:20 +02:00
Alexander Aring
87a93e4ece ieee802154: change needed headroom/tailroom
This patch cleanups needed_headroom, needed_tailroom and hard_header_len
fields for wpan and lowpan interfaces.

For wpan interfaces the worst case mac header len should be part of
needed_headroom, currently this is set as hard_header_len, but
hard_header_len should be set to the minimum header length which xmit
call assumes and this is the minimum frame length of 802.15.4.
The hard_header_len value will check inside send callbacl of AF_PACKET
raw sockets.

For lowpan interfaces, if fragmentation isn't needed the skb will
call dev_hard_header for 802154 layer and queue it afterwards. This
happens without new skb allocation, so we need the same headroom and
tailroom lengths like 802154 inside 802154 6lowpan layer. At least we
assume as minimum header length an ipv6 header size.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:20 +02:00
Alexander Aring
838b83d63d ieee802154: introduce wpan_dev_header_ops
The current header_ops callback structure of net device are used mostly
from 802.15.4 upper-layers. Because this callback structure is a very
generic one, which is also used by e.g. DGRAM AF_PACKET sockets, we
can't make this callback structure 802.15.4 specific which is currently
is.

I saw the smallest "constraint" for calling this callback with
dev_hard_header/dev_parse_header by AF_PACKET which assign a 8 byte
array for address void pointers. Currently 802.15.4 specific protocols
like af802154 and 6LoWPAN will assign the "struct ieee802154_addr" as
these parameters which is greater than 8 bytes. The current callback
implementation for header_ops.create assumes always a complete
"struct ieee802154_addr" which AF_PACKET can't never handled and is
greater than 8 bytes.

For that reason we introduce now a "generic" create/parse header_ops
callback which allows handling with intra-pan extended addresses only.
This allows a small use-case with AF_PACKET to send "somehow" a valid
dataframe over DGRAM.

To keeping the current dev_hard_header behaviour we introduce a similar
callback structure "wpan_dev_header_ops" which contains 802.15.4 specific
upper-layer header creation functionality, which can be called by
wpan_dev_hard_header.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:20 +02:00
Alexander Aring
a1da67b811 ieee802154: header_ops: fix frame control setting
Sometimes upper-layer protocols wants to generate a new mac header by
filling "struct ieee802154_hdr" only. These upper-layers sets for the
address settings the source and dest fields, but not the fc fields for
indicate the source and dest address mode. This patch changes the
"ieee802154_hdr_push" function so the fc address fields are set
according the source and dest fields of "struct ieee802154_hdr".

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:20 +02:00
Alexander Aring
cdd38b219e mac802154: llsec: fix device deletion from list
This patch adds a missing list_del when a device description will be
deleted.

Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:19 +02:00
Nachiket Kukade
475b9eacc5 Bluetooth: btmrvl: fix firmware dump issue
First firmware dump attempt from user works fine, but firmware goes
into bad state after this. Subsequent attempts fails.

As required by the firmware dump implementation, this change writes
FW_DUMP_READ_DONE value to dump ctrl register to address this issue.

Signed-off-by: Nachiket Kukade <kukaden@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-22 11:51:19 +02:00
Lukas Wunner
a645654b81 vga_switcheroo: Document _ALL_ the things!
This adds an "Overview" DOC section plus two DOC sections for the modes
of use ("Manual switching and manual power control" and "Driver power
control").

Also included is kernel-doc for all public functions, structs and enums.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-22 10:37:26 +02:00
Daniel Vetter
0f8b83984f Merge remote-tracking branch 'drm-intel/drm-intel-next-queued' into drm-intel-next-queued
Pull in patches Jani merged while I was at XDC.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-09-22 10:17:39 +02:00
Nicolas Pitre
6ff0966052 ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000
There is a 12MB unused region in our memory map between the vmalloc and
fixmap areas. This became unused with commit e9da6e9905, confirmed
with commit 64d3b6a3f4.

We also have a 8MB guard area before the vmalloc area.  With the default
240MB vmalloc area size and the current VMALLOC_END definition, that
means the end of low memory ends up at 0xef800000 which is unfortunate
for 768MB machines where 8MB of RAM is lost to himem.

Let's move VMALLOC_END to 0xff800000 so the guard area won't chop the
top of the 768MB low memory area while keeping the default vmalloc area
size unchanged and still preserving a gap between the vmalloc and fixmap
areas.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-22 08:13:57 +01:00
Sergey Dyasly
803e3dbcb4 ARM: 8430/1: use default ioremap alignment for SMP or LPAE
16MB alignment for ioremap mappings was added by commit a069c896d0 ("[ARM]
3705/1: add supersection support to ioremap()") in order to support supersection
mappings. But __arm_ioremap_pfn_caller uses section and supersection mappings
only in !SMP && !LPAE case. There is no need for such big alignment if either
SMP or LPAE is enabled.

After this change, ioremap will use default maximum alignment of 128 pages.

Link: https://lkml.kernel.org/g/1419328813-2211-1-git-send-email-d.safonov@partner.samsung.com

Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: James Bottomley <JBottomley@parallels.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Safonov <d.safonov@partner.samsung.com>
Signed-off-by: Sergey Dyasly <s.dyasly@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-22 08:13:57 +01:00
Masahiro Yamada
f460b6abde ARM: 8423/1: add const qualifier to smp_operations member in structures
The core framework does not modify smp_operations structures.
To clarify it, this commit adds 'const' qualifier to the 'ops'
member of struct of_cpu_method and the 'smp' member of struct
machine_desc.

This change allows each SoC code to add 'const' qualifier to its
smp_operation structure.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-22 08:13:57 +01:00
Masahiro Yamada
4caa9dda38 ARM: 8424/1: add const qualifier to the argument of smp_set_ops()
This function just copies '*ops' to 'smp_ops', so the given
structure '*ops' is not modified at all.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-22 08:13:57 +01:00
Lucas Stach
bbeb920951 ARM: 8422/1: enable imprecise aborts during early kernel startup
This patch adds imprecise abort enable/disable macros and uses them to
enable imprecise aborts early when starting the kernel.

This helps in tracking down the real cause for such imprecise abort, as
they are handled as soon as they occur. Until now those aborts would
only be enabled when entering the userspace and as a consequence crash
the first userspace process if any abort had been raised during kernel
startup.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-22 08:13:56 +01:00