On this board, USB2.0 is a host-only port, add vbus regulator node
and enable USB2.0 node.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add USB2.0 controller and phy nodes.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa95xxSA
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the AT24 EEPROM bindings the compatible string should
contain first the actual manufacturer, and second the corresponding
atmel model.
Add the atmel compatible fallback accordingly.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the AT24 EEPROM bindings the compatible string should
contain first the actual manufacturer, and second the corresponding
atmel model.
Add the atmel compatible fallback accordingly.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP tables have values of 150000, so it can be
removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move dsp_vdev* to under existed reserved-memory node to consolidate all
reserved-memory together.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DSP can be used with various frameworks (e.g audio firmware, rproc).
Currently 'dsp' configuration is intended for audio firmware but it
doesn't work well with board level DTs (e.g imx8mp-evk) because
board level DT enables audio related IPs (e.g SAI) while audio firmware
needs this IPs disabled (because firmware will configure them).
So, configure 'dsp' node to be used with rproc. This way users will be
able to use board DT to use the DSP as long as they don't clash with
Audio IP configurations.
More comples usage of 'dsp' node (e.g by audio firmware) will need to
create a separate dts file (or an overlay).
This change follows the approach taken for other i.MX8 boards
in commit 391a319c81 ("arm64: dts: imx8-ss-audio: configure dsp node
for rproc usage")
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add resets property to dsp node in order to be able to control the dsp
run/stall bit from audio block control.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add linux,pci-domain into pcie-ep node of i.MX8MQ.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set custom differential output voltage for LVDS, to fulfill requirements
of the connected display. LVDS differential voltage for data-lanes and
clock output has to be between 200 mV and 600 mV.
Driver sets 200 Ohm near-end termination by default.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
1) A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
2) A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64 out
of tree.
The code assumes that hierarchical interrupt domains are enabled and
dereferences irq_data::parent_data unconditionally. That works in mainline
because both architectures which enable that code have hierarchical domains
enabled. Though it breaks the ia64 build, which enables the functionality,
but does not have hierarchical domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which has
the appropriate #ifdeffery in place.
-----BEGIN PGP SIGNATURE-----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=lhoB
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary
-----BEGIN PGP SIGNATURE-----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=96YN
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f7525 ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
-----BEGIN PGP SIGNATURE-----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=GiQ6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
Commit 654102df2a ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This option was removed from Kconfig in 8c710f7525 ("net/sched:
Retire tcindex classifier") but from the defconfigs.
Fixes: 8c710f7525 ("net/sched: Retire tcindex classifier")
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix machine check handler _CIF_MCCK_GUEST bit setting by adding the
missing base register for relocated lowcore address
- Fix build failure on older linkers by conditionally adding the -no-pie
linker option only when it is supported
- Fix inaccurate kernel messages in vfio-ap by providing descriptive
error notifications for AP queue sharing violations
- Fix PCI isolation logic by ensuring non-VF devices correctly return
false in zpci_bus_is_isolated_vf()
- Fix PCI DMA range map setup by using dma_direct_set_offset() to add a
proper sentinel element, preventing potential overruns and translation
errors
- Cleanup header dependency problems with asm-offsets.c
- Add fault info for unexpected low-address protection faults in user mode
- Add support for HOTPLUG_SMT, replacing the arch-specific "nosmt"
handling with common code handling
- Use bitop functions to implement CPU flag helper functions to ensure
that bits cannot get lost if modified in different contexts on a CPU
- Remove unused machine_flags for the lowcore
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfwbhwACgkQjYWKoQLX
FBgmlwf5ASFl51yYziSg47NTOdCgkdE1un69VKCU7g9nzQBCFiK4PT+H/d69JHpt
g9dHi4sW6aXooUWyqtrQbsDZSnGKvJd48wOkpqAKKKJCBx3On/7s1fi1sJXgJovo
rSwC1cRD+yfFDNoQgXytSrRAkoPYvIPxf0aQei/8ziVNOrl7iF7nyPYpgNcZl2iz
rQWt+o4oWhygs6lK4w9t+0V0QLL+CqTIN/tpf7qeQzNFN5WfRJBn0dtxQhK72enG
WepU41LnZxDF5DTKhH4+PZFdLPP+YwwTGdqojW28leGy5T3/Eg0wrDaU1034Wpgd
m5Fg03z94Vdul/rAEscaH1PLT3Ufng==
=G5/g
-----END PGP SIGNATURE-----
Merge tag 's390-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix machine check handler _CIF_MCCK_GUEST bit setting by adding the
missing base register for relocated lowcore address
- Fix build failure on older linkers by conditionally adding the
-no-pie linker option only when it is supported
- Fix inaccurate kernel messages in vfio-ap by providing descriptive
error notifications for AP queue sharing violations
- Fix PCI isolation logic by ensuring non-VF devices correctly return
false in zpci_bus_is_isolated_vf()
- Fix PCI DMA range map setup by using dma_direct_set_offset() to add a
proper sentinel element, preventing potential overruns and
translation errors
- Cleanup header dependency problems with asm-offsets.c
- Add fault info for unexpected low-address protection faults in user
mode
- Add support for HOTPLUG_SMT, replacing the arch-specific "nosmt"
handling with common code handling
- Use bitop functions to implement CPU flag helper functions to ensure
that bits cannot get lost if modified in different contexts on a CPU
- Remove unused machine_flags for the lowcore
* tag 's390-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Fix no AP queue sharing allowed message written to kernel log
s390/pci: Fix dev.dma_range_map missing sentinel element
s390/mm: Dump fault info in case of low address protection fault
s390/smp: Add support for HOTPLUG_SMT
s390: Fix linker error when -no-pie option is unavailable
s390/processor: Use bitop functions for cpu flag helper functions
s390/asm-offsets: Remove ASM_OFFSETS_C
s390/asm-offsets: Include ftrace_regs.h instead of ftrace.h
s390/kvm: Split kvm_host header file
s390/pci: Fix zpci_bus_is_isolated_vf() for non-VFs
s390/lowcore: Remove unused machine_flags
s390/entry: Fix setting _CIF_MCCK_GUEST with lowcore relocation
* The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed.
* The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings.
* Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling.
* Support for relocatable !MMU kernels builds.
* Support for hpge pfnmaps, which should improve TLB utilization.
* Support for runtime constants, which improves the d_hash()
performance.
* Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm.
* Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU.
- Fix ftrace panics by saving the registers as expected by ftrace.
- Fix a couple of stimecmp usage related to cpu hotplug.
- purgatory_start is now aligned as per the STVEC requirements.
- A fix for hugetlb when calculating the size of non-present PTEs.
-----BEGIN PGP SIGNATURE-----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=nCJo
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_get_default_host() to irq_get_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-4-jirislaby@kernel.org
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_set_default_host() to irq_set_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-3-jirislaby@kernel.org
- Fix a performance regression on AMD iGPU and dGPU drivers,
related to the unintended activation of DMA bounce buffers
that regressed game performance if KASLR disturbed things
just enough.
- Fix a copy_user_generic() performance regression on certain
older non-FSRM/ERMS CPUs
- Fix a Clang build warning due to a semantic merge conflict
the Kunit tree generated with the x86 tree
- Fix FRED related system hang during S4 resume
- Remove an unused API
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmfvqpwRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hUTA//QOCCdQxYIkh2Zq/Ak+9vG7baoFUbV3ho
ECjI9Gm6lWNQgXNwwokR3vy7yxUI+Q2zTrlSSY5s45gxtq4xE4/mgiHGK9aF6wxL
9t41x+oI4tla330kIz1L6utjXnvL5X22AHNupUkzwTNV0Ci84ySQZO6tBnZ15Yer
+rA0uJFnUsRyZnE8alckFtOWqbknBmHGCElGuSSgIDVWARGWfXbIcYV0ph9HeYeG
Zm0YbDcze9A/58PHGD7OHW/hjfae/TDep2Xd6IJqLfEztxMOETgcCGY9Ti0DgnOD
1lFdv6VNxq8RLAdiUqId9+rJq/2Xyir/q2r79MXVPgd6K9vXGyVGMu4JZ4NcLdx8
vu9PNYIerXVGgz3EUQCZyLkinOxB8apiKFb+/6hYNoBpIVBs8yqE+Qai8WMMzHF1
5oMhefDfsXGfdvs5u/svXd3/dTl3F0gdaWb2Ej9qLh2Cxt/c7AEC5QT4NT0xjyDQ
c896JI2eFhvzGKh6QaDa8+4YzjGR1X8MT35ajtpPQKrZU2bbM0aorE4FSznBmv41
RYC+gNROBtnWaBSpbQnNp66o7Q9cBq7VNpPUVhAGz1wp9iIUHxvtLz9Rw/3Mxv83
pSSr5ZuYgskL4V/bvPj8ri/17+9h9/cxj9uXaKp4eDvgsihKdE5fdDpDf7iEpq5w
BivfdEPAe0U=
=8jxI
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix a performance regression on AMD iGPU and dGPU drivers, related to
the unintended activation of DMA bounce buffers that regressed game
performance if KASLR disturbed things just enough
- Fix a copy_user_generic() performance regression on certain older
non-FSRM/ERMS CPUs
- Fix a Clang build warning due to a semantic merge conflict the Kunit
tree generated with the x86 tree
- Fix FRED related system hang during S4 resume
- Remove an unused API
* tag 'x86-urgent-2025-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Fix system hang during S4 resume with FRED enabled
x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier()
x86/mm/init: Handle the special case of device private pages in add_pages(), to not increase max_pfn and trigger dma_addressing_limited() bounce buffers
x86/tools: Drop duplicate unlikely() definition in insn_decoder_test.c
x86/uaccess: Improve performance by aligning writes to 8 bytes in copy_user_generic(), on non-FSRM/ERMS CPUs
mostly dentry refcount mishandling
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ+3eRQAKCRBZ7Krx/gZQ
6/FlAP9uekG4L7IyvXBitM7fp/SU+YwiPJy3r/1gLLhEGAL6IwEAu+RfXVD9KY7+
yrsQi2i37uuUEit9KymVFUGeTJvAaQQ=
=hjki
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache fixes from Al Viro:
"Fixes for bugs caught as part of tree-in-dcache work.
Mostly dentry refcount mishandling"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
hypfs_create_cpu_files(): add missing check for hypfs_mkdir() failure
qibfs: fix _another_ leak
spufs: fix a leak in spufs_create_context()
spufs: fix gang directory lifetimes
spufs: fix a leak on spufs_new_file() failure
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
-----BEGIN PGP SIGNATURE-----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=XL1+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
- Fix max_pfn calculation when hotplugging memory so that it never
decreases
- Fix dereference of unused source register in the MOPS SET operation
fault handling
- Fix NULL calling in do_compat_alignment_fixup() when the 32-bit user
space does an unaligned LDREX/STREX
- Add the HiSilicon HIP09 processor to the Spectre-BHB affected CPUs
- Drop unused code pud accessors (special/mkspecial)
-----BEGIN PGP SIGNATURE-----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=/oKQ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix max_pfn calculation when hotplugging memory so that it never
decreases
- Fix dereference of unused source register in the MOPS SET operation
fault handling
- Fix NULL calling in do_compat_alignment_fixup() when the 32-bit user
space does an unaligned LDREX/STREX
- Add the HiSilicon HIP09 processor to the Spectre-BHB affected CPUs
- Drop unused code pud accessors (special/mkspecial)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Don't call NULL in do_compat_alignment_fixup()
arm64: Add support for HIP09 Spectre-BHB mitigation
arm64: mm: Drop dead code for pud special bit handling
arm64: mops: Do not dereference src reg for a set operation
arm64: mm: Correct the update of max_pfn
from Mike Rapoport fixes a couple of issues with the just-merged "arch,
mm: reduce code duplication in mem_init()" series.
- The 4 patch series "MAINTAINERS: add my isub-entries to MM part." from
Mike Rapoport does some maintenance on MAINTAINERS.
- The 6 patch series "remove tlb_remove_page_ptdesc()" from Qi Zheng
does some cleanup work to the page mapping code.
- The 7 patch series "mseal system mappings" from Jeff Xu permits
sealing of "system mappings", such as vdso, vvar, vvar_vclock, vectors
(arm compat-mode), sigpage (arm compat-mode).
- Plus the usual shower of singleton patches.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+4XpgAKCRDdBJ7gKXxA
jnwtAP43Rp3zyWf034fEypea36xQqcsy4I7YUTdZEgnFS7LCZwEApM97JvGHsYEr
Ns9Zhnh+E3RWASfOAzJoVZVrAaMovg4=
=MyVR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
* A bunch of fixes:
- 2 fixes in the purgatory code which prevented kexec to work
- Workaround an issue with gcc-15
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQgN2CKhD/Nf5v80u9kP7K8koXvigUCZ+uRYgAKCRBkP7K8koXv
iiroAQCIF7ojJGZvdRfAeknzb1WKM2GFucVTRxwyicyg/9omGQD5AYGYsaQSbN4H
j8ToELbTEnsY8YqRaQgm/AiuIkpM1AE=
=db0s
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=tmof
-----END PGP SIGNATURE-----
Merge tag 'riscv-mw2-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next
riscv patches for 6.15-rc1, part 2
* A bunch of fixes:
- 2 fixes in the purgatory code which prevented kexec to work
- Workaround an issue with gcc-15
* tag 'riscv-mw2-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
RISC-V: add vector extension validation checks
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and remove gotos for error
handling.
- Some followup patches to support dirty shutdown accounting
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands. Mostly in preparation for CXL EDAC
code to utilize the Features commands. It's also in preparation for CXL fwctl support
to utilize the CXL Features. The commands include "Get Supported Features", "Get Feature",
and "Set Feature".
- A series to support extended linear cache support described by the ACPI HMAT table. The
addition helps enumerate the cache and also provides additional RAS reporting support for
configuration with extended linear cache. (and related fixes for the
series).
- An update to cxl_test to support a 3-way capable CFMWS.
- A documentation fix to remove unused "mixed mode".
-----BEGIN PGP SIGNATURE-----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=ZME1
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2YPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2OQCgvxCyoeuNPuV4X89JdrgocMTMyTYAn15pGgDa
r7w9UDO/D7UqRnKEnFy+
=lJwK
-----END PGP SIGNATURE-----
Merge tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
- Remove the IBM CAPI (cxl) driver
Thanks to: Andrew Donnellan.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZ+0ppwAKCRAF0oADX8se
IW2NAQDU+ZNn8xlyePGg2lRE+RZHndB8QL3AqiA0G9MxOKf1zwEA1XxGuqhqhRTx
tMqKobTucDuDzS9IoE9jWXj5Eo9QBgs=
=lpPm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
-----BEGIN PGP SIGNATURE-----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=MSjq
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
- proper nofault accesses and read-only rodata
- hostfs fix for host inode number reuse
- fixes for host errno handling
- various cleanups/small fixes
* tag 'uml-for-linux-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Rewrite the sigio workaround based on epoll and tgkill
um: Prohibit the VM_CLONE flag in run_helper_thread()
um: Switch to the pthread-based helper in sigio workaround
um: ubd: Switch to the pthread-based helper
um: Add pthread-based helper support
um: x86: clean up elf specific definitions
um: Store full CSGSFS and SS register from mcontext
um: virt-pci: Refactor virtio_pcidev into its own module
um: work around sched_yield not yielding in time-travel mode
um/locking: Remove semicolon from "lock" prefix
um: Update min_low_pfn to match changes in uml_reserved
um: use str_yes_no() to remove hardcoded "yes" and "no"
um: hostfs: avoid issues on inode number reuse by host
um: Allocate vdso page pointer statically
um: remove copy_from_kernel_nofault_allowed
um: mark rodata read-only and implement _nofault accesses
um: Pass the correct Rust target and options with gcc
1, Add jump table support for objtool;
2, Always select HAVE_VIRT_CPU_ACCOUNTING_GEN;
3, Enable UBSAN (Undefined Behavior Sanitizer);
4, Increase MAX_IO_PICS up to 8;
5, Increase ARCH_DMA_MINALIGN up to 16;
6, Fix and improve BPF JIT;
7, Fix and improve vDSO implementation;
8, Update the default config file;
9, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=9xTj
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
- Enable UBSAN (Undefined Behavior Sanitizer)
- Increase MAX_IO_PICS up to 8
- Increase ARCH_DMA_MINALIGN up to 16
- Fix and improve BPF JIT
- Fix and improve vDSO implementation
- Update the default config file
- Some bug fixes and other small changes
* tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: vDSO: Make use of the t8 register for vgetrandom-chacha
LoongArch: vDSO: Remove --hash-style=sysv
LoongArch: BPF: Don't override subprog's return value
LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC
LoongArch: BPF: Fix off-by-one error in build_prologue()
LoongArch: Rework the arch_kgdb_breakpoint() implementation
LoongArch: Fix device node refcount leak in fdt_cpu_clk_init()
LoongArch: Increase ARCH_DMA_MINALIGN up to 16
LoongArch: Increase MAX_IO_PICS up to 8
LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig
LoongArch: Enable UBSAN (Undefined Behavior Sanitizer)
LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
rust: Fix enabling Rust and building with GCC for LoongArch
-----BEGIN PGP SIGNATURE-----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=XvoD
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"Avoid direct HLT instruction execution in TDX guests.
TDX guests aren't expected to use the HLT instruction directly. It
causes a virtualization exception (#VE). While the #VE _can_ be
handled, the current handling is slow and buggy and the easiest thing
is just to avoid HLT in the first place. Plus, the kernel already has
paravirt infrastructure that makes it relatively painless.
Make TDX guests require paravirt and add some TDX-specific paravirt
handlers which avoid HLT in the normal halt routines. Also add a
warning in case another HLT sneaks in.
There was a report that this leads to a "major performance
improvement" on specjbb2015, probably because of the extra #VE
overhead or missed wakeups from the buggy HLT handling"
* tag 'x86_tdx_for_6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Emit warning if IRQs are enabled during HLT #VE handling
x86/tdx: Fix arch_safe_halt() execution for TDX VMs
x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature,
which, despite its default-off nature, increased the profile/impact
of objtool warnings:
- Improve error handling and the presentation of warnings/errors.
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions.
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations.
- Update objtool to latest (known) compiler quirks and
objtool bugs triggered by compiler code generation
- Misc fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KkiI
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on s390, covering the
vdso.
[hca@linux.ibm.com: update supported architectures]
Link: https://lkml.kernel.org/r/20250317131917.1332402-1-hca@linux.ibm.com
Link: https://lkml.kernel.org/r/20250311123326.2686682-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The x86 has already been converted to use struct ptdesc, so convert it to
use tlb_remove_ptdesc() instead of tlb_remove_table().
Link: https://lkml.kernel.org/r/36ad56b7e06fa4b17fb23c4fc650e8e0d72bb3cd.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To support fast gup, the commit 69be3fb111 ("riscv: enable
MMU_GATHER_RCU_TABLE_FREE for SMP && MMU") did the following:
1) use tlb_remove_page_ptdesc() for those platforms which use IPI to
perform TLB shootdown
2) use tlb_remove_ptdesc() for those platforms which use SBI to perform
TLB shootdown
The tlb_remove_page_ptdesc() is the wrapper of the tlb_remove_page(). By
design, the tlb_remove_page() should be used to remove a normal page from
a page table entry, and should not be used for page table pages.
The tlb_remove_ptdesc() is the wrapper of the tlb_remove_table(), which is
designed specifically for freeing page table pages. If the
CONFIG_MMU_GATHER_TABLE_FREE is enabled, the tlb_remove_table() will use
semi RCU to free page table pages, that is:
- batch table freeing: asynchronous free by RCU
- single table freeing: IPI + synchronous free
If the CONFIG_MMU_GATHER_TABLE_FREE is disabled, the tlb_remove_table()
will fall back to pagetable_dtor() + tlb_remove_page().
For case 1), since we need to perform TLB shootdown before freeing the
page table page, the local_irq_save() in fast gup can block the freeing
and protect the fast gup page walker. Therefore we can ensure safety by
just using tlb_remove_page_ptdesc(). In addition, we can also the
tlb_remove_ptdesc()/tlb_remove_table() to achieve it, and it doesn't
matter whether CONFIG_MMU_GATHER_RCU_TABLE_FREE is selected. And in
theory, the performance of freeing pages asynchronously via RCU will not
be lower than synchronous free.
For case 2), since local_irq_save() only disable S-privilege IPI irq but
not M-privilege's, which is used by the SBI implementation to perform TLB
shootdown, so we must select CONFIG_MMU_GATHER_RCU_TABLE_FREE and use
tlb_remove_ptdesc() to ensure safety. The riscv selects this config for
SMP && MMU, the CONFIG_RISCV_SBI is dependent on MMU. Therefore, only the
UP system may have the situation where CONFIG_MMU_GATHER_RCU_TABLE_FREE is
disabled but CONFIG_RISCV_SBI is enabled. But there is no freeing vs fast
gup race in the UP system.
So, in summary, we can use tlb_remove_ptdesc() to support fast gup in all
cases, and this interface is specifically designed for page table pages.
So let's use it unconditionally.
Link: https://lkml.kernel.org/r/9025595e895515515c95e48db54b29afa489c41d.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now, the nine architectures of csky, hexagon, loongarch, m68k, mips,
nios2, openrisc, sh and um do not select CONFIG_MMU_GATHER_RCU_TABLE_FREE,
and just call pagetable_dtor() + tlb_remove_page_ptdesc() (the wrapper of
tlb_remove_page()). This is the same as the implementation of
tlb_remove_{ptdesc|table}() under !CONFIG_MMU_GATHER_TABLE_FREE, so
convert these architectures to use tlb_remove_ptdesc().
The ultimate goal is to make the architecture only use tlb_remove_ptdesc()
or tlb_remove_table() for page table pages.
[zhengqi.arch@bytedance.com: v2]
Link: https://lkml.kernel.org/r/20250303072603.45423-1-zhengqi.arch@bytedance.com
[akpm@linux-foundation.org: remove trailing semi in arch/loongarch/include/asm/pgalloc.h]
Link: https://lkml.kernel.org/r/19db3e8673b67bad2f1df1ab37f1c89d99eacfea.1740454179.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As reported by lkp, there is a section mismatch of mm_cmdline_setup() and
memblock. The reason is we don't specify the section of
mm_cmdline_setup() and gcc put it into .text.unlikely.
As mm_cmdline_setup() is only used in mmu_init(), which is in .init.text
section, put mm_cmdline_setup() into it too.
Link: https://lkml.kernel.org/r/20250328010136.13139-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503241259.kJV3U7Xj-lkp@intel.com/
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Upon a wakeup from S4, the restore kernel starts and initializes the
FRED MSRs as needed from its perspective. It then loads a hibernation
image, including the image kernel, and attempts to load image pages
directly into their original page frames used before hibernation unless
those frames are currently in use. Once all pages are moved to their
original locations, it jumps to a "trampoline" page in the image kernel.
At this point, the image kernel takes control, but the FRED MSRs still
contain values set by the restore kernel, which may differ from those
set by the image kernel before hibernation. Therefore, the image kernel
must ensure the FRED MSRs have the same values as before hibernation.
Since these values depend only on the location of the kernel text and
data, they can be recomputed from scratch.
Reported-by: Xi Pardee <xi.pardee@intel.com>
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401075728.3626147-1-xin@zytor.com
The last use of iosf_mbi_unregister_pmic_bus_access_notifier() was
removed in 2017 by:
a5266db4d3 ("drm/i915: Acquire PUNIT->PMIC bus for intel_uncore_forcewake_reset()")
Remove it.
(Note that the '_unlocked' version is still used.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20241225175010.91783-1-linux@treblig.org
