ip_vs_sync_cleanup() may be called from ip_vs_init() on error
and thus needs to be accesible from section __init
Reporte-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This is a rather naieve approach to allowing PVS to compile with
CONFIG_SYSCTL disabled. I am working on a more comprehensive patch which
will remove compilation of all sysctl-related IPVS code when CONFIG_SYSCTL
is disabled.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
These variables are unused as a result of the recent netns work.
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Tested-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
It wasn't using $(OUTPUT) to rm *.o and there were some funny looking
automake files that never get created but were being deleted anyway.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only user for this hook was selinux. sysctl routes every call
through /proc/sys/. Selinux and other security modules use the file
system checks for sysctl too, so no need for this hook any more.
Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
This fixes an old (2007) selinux regression: filesystem labeling for
/proc/sys returned
-r--r--r-- unknown /proc/sys/fs/file-nr
instead of
-r--r--r-- system_u:object_r:sysctl_fs_t:s0 /proc/sys/fs/file-nr
Events that lead to breaking of /proc/sys/ selinux labeling:
1) sysctl was reimplemented to route all calls through /proc/sys/
commit 77b14db502
[PATCH] sysctl: reimplement the sysctl proc support
2) proc_dir_entry was removed from ctl_table:
commit 3fbfa98112
[PATCH] sysctl: remove the proc_dir_entry member for the sysctl tables
3) selinux still walked the proc_dir_entry tree to apply
labeling. Because ctl_tables don't have a proc_dir_entry, we did
not label /proc/sys/ inodes any more. To achieve this the /proc/sys/
inodes were marked private and private inodes were ignored by
selinux.
commit bbaca6c2e7
[PATCH] selinux: enhance selinux to always ignore private inodes
commit 86a71dbd3e
[PATCH] sysctl: hide the sysctl proc inodes from selinux
Access control checks have been done by means of a special sysctl hook
that was called for read/write accesses to any /proc/sys/ entry.
We don't have to do this because, instead of walking the
proc_dir_entry tree we can walk the dentry tree (as done in this
patch). With this patch:
* we don't mark /proc/sys/ inodes as private
* we don't need the sysclt security hook
* we walk the dentry tree to find the path to the inode.
We have to strip the PID in /proc/PID/ entries that have a
proc_dir_entry because selinux does not know how to label paths like
'/1/net/rpc/nfsd.fh' (and defaults to 'proc_t' labeling). Selinux does
know of '/net/rpc/nfsd.fh' (and applies the 'sysctl_rpc_t' label).
PID stripping from the path was done implicitly in the previous code
because the proc_dir_entry tree had the root in '/net' in the example
from above. The dentry tree has the root in '/1'.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
net/netfilter/nf_conntrack_netlink.c: In function 'ctnetlink_parse_tuple':
net/netfilter/nf_conntrack_netlink.c:832:11: warning: comparison between 'enum ctattr_tuple' and 'enum ctattr_type'
Use ctattr_type for the 'type' parameter since that's the type of all attributes
passed to this function.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Currently SELinux has rules which label new objects according to 3 criteria.
The label of the process creating the object, the label of the parent
directory, and the type of object (reg, dir, char, block, etc.) This patch
adds a 4th criteria, the dentry name, thus we can distinguish between
creating a file in an etc_t directory called shadow and one called motd.
There is no file globbing, regex parsing, or anything mystical. Either the
policy exactly (strcmp) matches the dentry name of the object or it doesn't.
This patch has no changes from today if policy does not implement the new
rules.
Signed-off-by: Eric Paris <eparis@redhat.com>
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
free the skb's when the Tx of PAPRD frames fails and also add a debug
message indicating that.
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
None of the set types need uaccess.h since this is handled centrally
in ip_set_core. Most set types additionally don't need bitops.h and
spinlock.h since they use neither. tcp.h is only needed by those
using before(), udp.h is not needed at all.
Signed-off-by: Patrick McHardy <kaber@trash.net>
For the following rule:
iptables -I PREROUTING -t raw -j CT --ctevents assured
The event delivered looks like the following:
[UPDATE] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]
Note that the TCP protocol state is not included. For that reason
the CT event filtering is not very useful for conntrackd.
To resolve this issue, instead of conditionally setting the CT events
bits based on the ctmask, we always set them and perform the filtering
in the late stage, just before the delivery.
Thus, the event delivered looks like the following:
[UPDATE] tcp 6 432000 ESTABLISHED src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
In 135367b "netfilter: xtables: change xt_target.checkentry return type",
the type returned by checkentry was changed from boolean to int, but the
return values where not adjusted.
arptables: Input/output error
This broke arptables with the mangle target since it returns true
under success, which is interpreted by xtables as >0, thus
returning EIO.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The patch adds the combined module of the "SET" target and "set" match
to netfilter. Both the previous and the current revisions are supported.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the list:set type support in two flavours:
without and with timeout. The sets has two sides: for the userspace,
they store the names of other (non list:set type of) sets: one can add,
delete and test set names. For the kernel, it forms an ordered union of
the member sets: the members sets are tried in order when elements are
added, deleted and tested and the process stops at the first success.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:net,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 network address/prefix and protocol/port
pairs.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are one dimensional: IPv4/IPv6 network address/prefixes.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port,net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
network address/prefix triples. The different prefixes are searched/matched
from the longest prefix to the shortes one (most specific to least).
In other words the processing time linearly grows with the number of
different prefixes in the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
When built with rcu checks enabled, vhost triggers
bogus warnings as vhost features are read without
dev->mutex sometimes, and private pointer is read
with our kind of rcu where work serves as a
read side critical section.
Fixing it properly is not trivial.
Disable the warnings by stubbing out the checks for now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The module implements the hash:ip,port,ip type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
address triples.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 address and protocol/port pairs. The port
is interpeted for TCP, UPD, ICMP and ICMPv6 (at the latters as type/code
of course).
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip type support in four flavours:
for IPv4 or IPv6, both without and with timeout support.
All the hash types are based on the "array hash" or ahash structure
and functions as a good compromise between minimal memory footprint
and speed. The hashing uses arrays to resolve clashes. The hash table
is resized (doubled) when searching becomes too long. Resizing can be
triggered by userspace add commands only and those are serialized by
the nfnl mutex. During resizing the set is read-locked, so the only
possible concurrent operations are the kernel side readers. Those are
protected by RCU locking.
Because of the four flavours and the other hash types, the functions
are implemented in general forms in the ip_set_ahash.h header file
and the real functions are generated before compiling by macro expansion.
Thus the dereferencing of low-level functions and void pointer arguments
could be avoided: the low-level functions are inlined, the function
arguments are pointers of type-specific structures.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:port type in two flavours, without
and with timeout support to store TCP/UDP ports from a range.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:ip,mac set type in two flavours,
without and with timeout support. In this kind of set one can store
IPv4 address and (source) MAC address pairs. The type supports elements
added without the MAC part filled out: when the first matching from kernel
happens, the MAC part is automatically filled out. The timing out of the
elements stars when an element is complete in the IP,MAC pair.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:ip set type in two flavours, without
and with timeout support. In this kind of set one can store IPv4
addresses (or network addresses) from a given range.
In order not to waste memory, the timeout version does not rely on
the kernel timer for every element to be timed out but on garbage
collection. All set types use this mechanism.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The patch adds the IP set core support to the kernel.
The IP set core implements a netlink (nfnetlink) based protocol by which
one can create, destroy, flush, rename, swap, list, save, restore sets,
and add, delete, test elements from userspace. For simplicity (and backward
compatibilty and for not to force ip(6)tables to be linked with a netlink
library) reasons a small getsockopt-based protocol is also kept in order
to communicate with the ip(6)tables match and target.
The netlink protocol passes all u16, etc values in network order with
NLA_F_NET_BYTEORDER flag. The protocol enforces the proper use of the
NLA_F_NESTED and NLA_F_NET_BYTEORDER flags.
For other kernel subsystems (netfilter match and target) the API contains
the functions to add, delete and test elements in sets and the required calls
to get/put refereces to the sets before those operations can be performed.
The set types (which are implemented in independent modules) are stored
in a simple RCU protected list. A set type may have variants: for example
without timeout or with timeout support, for IPv4 or for IPv6. The sets
(i.e. the pointers to the sets) are stored in an array. The sets are
identified by their index in the array, which makes possible easy and
fast swapping of sets. The array is protected indirectly by the nfnl
mutex from nfnetlink. The content of the sets are protected by the rwlock
of the set.
There are functional differences between the add/del/test functions
for the kernel and userspace:
- kernel add/del/test: works on the current packet (i.e. one element)
- kernel test: may trigger an "add" operation in order to fill
out unspecified parts of the element from the packet (like MAC address)
- userspace add/del: works on the netlink message and thus possibly
on multiple elements from the IPSET_ATTR_ADT container attribute.
- userspace add: may trigger resizing of a set
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
More debug printk pruning and turn down some that the user can cause
intentionally to debug level.
Tidy up the ioctl code a bit more
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make the format of the codec_reg file more easily parsable. Remove
the header field which gives the codec name. These changes are important
when it comes to extend the debugfs codec_reg file to dump more than
PAGE_SIZE bytes to make it easier to calculate offsets within the
file.
We still need to handle the case when the snd_soc_read() call fails
and <no data: %d> is outputted.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The patch adds the NFNL_SUBSYS_IPSET id and NLA_PUT_NET* macros to the
vanilla kernel.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Add fields to describe all the audio-related GPIOs on Harmony, except for
the codec's GPIO IRQ, which will be passed in its i2c_board_info.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The CX20442 codec driver never provided the snd_soc_codec_driver's
.reg_cache_default member. With the latest ASoC framework changes, it
seems to be referred unconditionally, resulting in a NULL pointer
dereference if missing. Provide it.
Created and tested on Amstrad Delta against linux-2.6.38-rc2
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
The Amstrad Delta ASoC driver used to override the digital_mute()
callback, expected to be not provided by the on-board CX20442 CODEC
driver, with its own implementation. While this is still posssible when
substituting the whole empty snd_soc_dai_driver.ops member (the CX20442
case), replacing snd_soc_dai_ops.digital_mute only is no longer correct
after the snd_soc_dai_driver.ops member has been constified, and results
in build error.
Drop this actually not used code path in hope the CX20442 driver never
provides its own snd_soc_dai_ops structure.
Created and tested against linux-2.6.38-rc2
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
gpio_set_value* should accept logic values not just 0 or 1. The WM8903 GPIO
driver has been fixed to work this way, so remove the redundant !!
previously required when it didn't accept values >1.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Earphone in Nokia RX-51/N900 is connected to left HP output of B part of the
TLV320AIC34 dual codec. In RX-51 the codec A is used as a traditional codec
and the codec B as an auxiliary device.
Audio from codec A goes via the codec B to earphone:
MONO_LOUT of A -> LINE2R of B (B interconnects) -> HPLOUT of B -> Earphone.
Take earphone into use by utilizing the recent ASoC auxiliary and
cross-device support.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
The error check of btrfs_start_transaction() is added, and the mistake
of the error check on several places is corrected.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Because NULL is returned when the memory allocation fails,
it is checked whether it is NULL.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With cmwq, there's no reason to use dedicated rds_ib_fmr_wq - it's not
in the memory reclaim path and the maximum number of concurrent work
items is bound by the number of devices. Drop it and use system_wq
instead. This rds_ib_fmr_init/exit() noops. Both removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Grover <andy.grover@oracle.com>
Now that cmwq can handle high concurrency, it's more efficient to use
work than a dedicated kthread. Convert p9_poll_proc() to a work
function for p9_poll_work and make p9_pollwake() schedule it on each
poll event. The work is sync flushed on module exit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: v9fs-developer@lists.sourceforge.net
With cmwq, there's no reason to use a dedicated workqueue in trans_fd.
Drop p9_mux_wq and use system_wq instead. The used work items are
already sync canceled in p9_conn_destroy() and doesn't require further
synchronization.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: v9fs-developer@lists.sourceforge.net
Convert from create[_singlethread]_workqueue() to alloc_workqueue().
* xfsdatad_workqueue and xfsconvertd_workqueue are identity converted.
Using higher concurrency limit might be useful but given the
complexity of workqueue usage in xfs, proceeding cautiously seems
better.
* xfs_mru_reap_wq is converted to non-ordered workqueue with max
concurrency of 1 as the work items don't require any specific
ordering and already have proper synchronization. It seems it was
singlethreaded to save worker threads, which is no longer a concern.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Cc: Christoph Hellwig <hch@infradead.org>
