Commit graph

254,637 commits

Author SHA1 Message Date
Nishanth Aravamudan
bc0df9ec4c powerpc/pci: Cleanup device dma setup code
Use set_dma_ops and remove unused oddly-named temp pointer sd.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:22 +11:00
Nishanth Aravamudan
e72ed6b509 powerpc/pseries: Use kmemdup
While looking at some code paths I came across this code that zeros
memory then copies over the entire length.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:22 +11:00
Nishanth Aravamudan
45848e0fc1 powerpc/viobus: Free TCE table on device release
Release the TCE table as the XXX suggests, except on FW_FEATURE_ISERIES,
where the tables are allocated globally and reused.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:21 +11:00
Nishanth Aravamudan
edea8f6f48 powerpc/vio: Use put_device() on device_register failure
The kernel doc for device_register (and device_initialize) very clearly
state to call put_device not kfree after calling, even on error.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:21 +11:00
Nishanth Aravamudan
ffa56e555a powerpc/dma: Fix check for direct DMA support
The current check is wrong because it does not take the DMA offset intot
account, and in the case of a driver which doesn't actually support
64bits would falsely report that device as working.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:21 +11:00
Nishanth Aravamudan
1cb8e85a9d powerpc/dma: Fix dma_iommu_dma_supported compare
The table offset is in entries, each of which imply a dma address of
an IOMMU page.

Also, we should check the device can reach the whole IOMMU table.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:21 +11:00
Nishanth Aravamudan
dda804ad40 powerpc/pci: Fix return type of BUID_{HI,LO} macros
BUID_HI and BUID_LO are used to pass data to call_rtas, which expects
ints or u32s. But the macro doesn't cast the return, so the result is
still u64. Use the upper_32_bits and lower_32_bits macros that have been
added to kernel.h.

Found by getting printf format errors trying to debug print the args, no
actual code change for 64 bit kernels where the macros are actually
used.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:20 +11:00
Julia Lawall
8032214346 i2c/i2c-pasemi.c: Fix unsigned return type
The function has an unsigned return type, but returns a negative constant
to indicate an error condition.  The result of calling the function is
always stored in a variable of type (signed) int, and thus unsigned can be
dropped from the return type.

A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@exists@
identifier f;
constant C;
@@

 unsigned f(...)
 { <+...
*  return -C;
 ...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:04 +11:00
Julia Lawall
a655237fa2 powerpc/irq.c: Add of_node_put to avoid memory leak
In this case, a device_node structure is stored in another structure that
is then freed without first decrementing the reference count of the
device_node structure.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression x;
identifier f;
position p1,p2;
@@

x@p1->f = \(of_find_node_by_path\|of_find_node_by_name\|of_find_node_by_phandle\|of_get_parent\|of_get_next_parent\|of_get_next_child\|of_find_compatible_node\|of_match_node\|of_find_node_by_type\|of_find_node_with_property\|of_find_matching_node\|of_parse_phandle\|of_node_get\)(...);
... when != of_node_put(x)
kfree@p2(x)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@
cocci.print_main("call",p1)
cocci.print_secs("free",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:04 +11:00
Joe Perches
689fd14ae9 powerpc: Remove pr_<level> uses of KERN_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:03 +11:00
Joe Perches
4e74fd7d0a powerpc: Use static const char arrays
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:03 +11:00
Nathan Fontenot
410bccf978 powerpc/pseries: Partition migration in the kernel
Enable partition migration in the kernel.  To do this a new sysfs file,
/sys/kernel/mobility/migration, is created.  In order to initiate a migration
the stream id (generated by the HMC managing the system) is written to this
file.

After a migration occurs, and what is the majority of this code, the device
tree needs to be updated for the new system the partition is running on. This
is done via the ibm,update-nodes and ibm,update-properties rtas calls which
return information regarding which nodes and properties of the device tree
are to be added/removed/updated.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:03 +11:00
Nathan Fontenot
d8862be122 powerpc/pseries: Export rtas_ibm_suspend_me()
Export the rtas_ibm_suspend_me() routine.  This is needed to perform
partition migration in the kernel.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:02 +11:00
Nathan Fontenot
206489748b powerpc/pseries: Export device tree updating routines
Export routines associated with adding and removing device tree nodes on
pseries needed for device tree updating.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-10-13 16:19:02 +11:00
Benjamin Herrenschmidt
4783f393de Merge remote branch 'kumar/merge' into next 2010-10-13 16:18:36 +11:00
Jeremy Kerr
a9fadeefdc of: use __be32 types for big-endian device tree data
Use the sparse annotations so we can keep track of endianness.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:58:42 -06:00
Andres Salomon
52f6537cb2 of/irq: remove references to NO_IRQ in drivers/of/platform.c
Instead of referencing NO_IRQ in platform.c, define some helper functions
in irq.c to call instead from platform.c.  Keep NO_IRQ usage local to
irq.c, and define NO_IRQ if not defined in headers.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:58:27 -06:00
Andres Salomon
e2f2a93b63 of/promtree: add package-to-path support to pdt
package-to-path is a PROM function which tells us the real (full) name of the
node.  This provides a hook for that in the prom ops struct, and makes use
of it in the pdt code when attempting to determine a node's name.  If the
hook is available, try using it (falling back to looking at the "name"
property if it fails).

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:58:08 -06:00
Andres Salomon
ed41850298 of/promtree: add of_pdt namespace to pdt code
For symbols still lacking namespace qualifiers, add an of_pdt_ prefix.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:58:00 -06:00
Andres Salomon
f90c34bd65 of/promtree: no longer call prom_ functions directly; use an ops structure
Rather than assuming an architecture defines prom_getchild and friends,
define an ops struct with hooks for the various prom functions that
pdt.c needs.  This ops struct is filled in by the
arch-(and sometimes firmware-)specific code, and passed to
of_pdt_build_devicetree.

Update sparc code to define the ops struct as well.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:57:53 -06:00
Mingkai Hu
f3016fa591 powerpc/of: add eSPI controller dts bindings and DTS modification
Also modifiy the document of cell-index in SPI controller. Add the
SPI flash(s25fl128p01) support on p4080ds and mpc8536ds board.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:38:12 -06:00
Mingkai Hu
8b60d6c25b spi/fsl_spi: add eSPI controller support
Add eSPI controller support based on the library code spi_fsl_lib.c.

The eSPI controller is newer controller 85xx/Pxxx devices supported.
There're some differences comparing to the SPI controller:

1. Has different register map and different bit definition
   So leave the code operated the register to the driver code, not
   the common code.

2. Support 4 dedicated chip selects
   The software can't controll the chip selects directly, The SPCOM[CS]
   field is used to select which chip selects is used, and the
   SPCOM[TRANLEN] field is set to tell the controller how long the CS
   signal need to be asserted. So the driver doesn't need the chipselect
   related function when transfering data, just set corresponding register
   fields to controll the chipseclect.

3. Different Transmit/Receive FIFO access register behavior
   For SPI controller, the Tx/Rx FIFO access register can hold only
   one character regardless of the character length, but for eSPI
   controller, the register can hold 4 or 2 characters according to
   the character lengths. Access the Tx/Rx FIFO access register of the
   eSPI controller will shift out/in 4/2 characters one time. For SPI
   subsystem, the command and data are put into different transfers, so
   we need to combine all the transfers to one transfer in order to pass
   the transfer to eSPI controller.

4. The max transaction length limitation
   The max transaction length one time is limitted by the SPCOM[TRANSLEN]
   field which is 0xFFFF. When used mkfs.ext2 command to create ext2
   filesystem on the flash, the read length will exceed the max value of
   the SPCOM[TRANSLEN] field.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:38:12 -06:00
Mingkai Hu
b36ece8325 spi/mpc8xxx: refactor the common code for SPI/eSPI controller
Refactor the common code in file spi_fsl_spi.c to spi_fsl_lib.c used
by SPI/eSPI controller driver as a library, and leave the QE/CPM SPI
controller code in the SPI controller driver spi_fsl_spi.c.

Because the register map of the SPI controller and eSPI controller
is so different, also leave the code operated the register to the
driver code, not the common code.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:38:12 -06:00
Mingkai Hu
3272029fb3 spi/mpc8xxx: rename spi_mpc8xxx.c to spi_fsl_spi.c
This will pave the way to refactor out the common code which can be used
by the eSPI controller driver, and rename the SPI controller dirver to the
file spi_fsl_spi.c.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:38:12 -06:00
Grant Likely
492c032bec Merge commit 'v2.6.36-rc7' into spi/next 2010-10-12 21:38:02 -06:00
Linus Walleij
f9d629c737 spi/pl022: fix dubious allocation staticize platform data
This removes some dubious allocation of a local chipinfo struct
in favor of a constant preset, tagging that one const revealed
further problems with platform data being modified so fixed up
these too.

Reported-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
Linus Walleij
5a1c98be1d spi/pl022: get rid of chipinfo dev pointer
What is the dev pointer doing inside the platform data anyway.
We have another pointer to the actual device at hand, use that.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
Kevin Wells
bde435a9ca spi/pl022: Add spi->mode support to AMBA SPI driver
This patch adds spi->mode support for the AMBA pl022 driver and
allows spidev to correctly alter SPI modes. Unused fields used in
the pl022 header file for the pl022_config_chip have been removed.

The ab8500 client driver selects the data transfer size instead
of the platform data.

For platforms that use the amba pl022 driver, the unused fields
in the controller data structure have been removed and the .mode
field in the SPI board info structure is used instead.

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
matt mooney
fadcf49b9b spi: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
Linus Walleij
b1b6b9aa6f spi/pl022: add PrimeCell generic DMA support
This extends the PL022 SSP/SPI driver with generic DMA engine
support using the PrimeCell DMA engine interface. Also fix up the
test code for the U300 platform.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
Grant Likely
cdbc8f042f spi/topcliff: Tidy up Kconfig help text
The original didn't specify Topcliff in the config prompt text.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
Grant Likely
65308c46b7 spi/topcliff: cleanups for style and conciseness
This patch makes multiple cleanups to the new topcliff pch spi driver
including, but not limited to,
- removing superfluous brackets around variables
- open coding functions that are only used once
- removing unnecessary line breaks
- removing unused functions
- simplifying the interrupt enable/disable code
- remove unnecessary (void *) casts.
- remove b_mem_fail from pch_spi_set_tx to code it more cleanly
- shorten dev_dbg() messages for conciseness and readability

More cleanups are still needed in this driver.  In particular,
- the driver filename should be changed to spi_topcliff_pch.c
- many of the dev_dbg() lines should be trimmed (particularly the ones
  on unconditional code paths).
- I suspect that the locking model not correct.  I'd like to know what
  drivers' critical regions are, and how they are protected.
- get_resources and release_resources probably should be open coded in
  .probe and .release respectively.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-12 21:37:37 -06:00
Daniel Drake
bf1ebf0079 x86, olpc: Add XO-1 poweroff support
Add a pm_power_off handler for the OLPC XO-1 laptop.

The driver can be built modular and follows the behaviour of the
APM driver, setting pm_power_off to NULL on unload. However, the
ability to unload the module will probably be removed (with a simple
__module_get(THIS_MODULE)) if/when XO-1 suspend/resume support is
added to this file at a later date.

Signed-off-by: Daniel Drake <dsd@laptop.org>
LKML-Reference: <20101010094032.9AE669D401B@zog.reactivated.net>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-12 17:31:15 -07:00
Russell King
06c1088448 ARM: relax ioremap prohibition (309caa9) for -final and -stable
... but produce a big warning about the problem as encouragement
for people to fix their drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-13 00:19:03 +01:00
Daniel Walker
d601c795c4 drivers: msm: video: add dev_set_name call
This is required before the driver can successfully be registered.

Adapted from Arve Hjønnevåg <arve@android.com> changes in the Google tree.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-12 16:11:12 -07:00
Daniel Walker
5ad43ff98a drivers: video: msm: fix hang on disable_irq
There's a resource race around disable_irq. Using the nosync
version allows the function to continue and prevents the hang.

Adapted from Arve Hjønnevåg <arve@android.com> changes in the Google tree.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-12 16:10:23 -07:00
Tony Lindgren
2a12400eed omap: Fix spotty MMC voltages
As noted by Michał Mirosław <mirqus@gmail.com>, the voltages should
cover the supported voltage range, or support only one voltage.

As all these boards are using a GPIO to enable the power, chances
are that only 3.3V cards are supported on these boards.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-12 16:07:51 -07:00
Yinghai Lu
c7fc2de0c8 memblock, bootmem: Round pfn properly for memory and reserved regions
We need to round memory regions correctly -- specifically, we need to
round reserved region in the more expansive direction (lower limit
down, upper limit up) whereas usable memory regions need to be rounded
in the more restrictive direction (lower limit up, upper limit down).

This introduces two set of inlines:

	memblock_region_memory_base_pfn()
	memblock_region_memory_end_pfn()
	memblock_region_reserved_base_pfn()
	memblock_region_reserved_end_pfn()

Although they are antisymmetric (and therefore are technically
duplicates) the use of the different inlines explicitly documents the
programmer's intention.

The lack of proper rounding caused a bug on ARM, which was then found
to also affect other architectures.

Reported-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB4CDFD.4020105@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-12 15:37:51 -07:00
Paul Mundt
5e5b3a9dc8 sh: perf: Support SH-X3 hardware counters.
The PMCAT location has conveniently moved on newer SH-X3 parts, special
case this for now with a note. This will probably want to be redone in a
less visually offensive way when/if more information becomes available.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13 07:17:03 +09:00
Tony Luck
c0f37d2ac3 Merge branches 'release', 'drop_do_IRQ', 'fix_early_irq', 'misc-2.6.37', 'next-fixes', 'optimize-unwind', 'remove-compat-h' and 'stack_trace' into release 2010-10-12 15:06:59 -07:00
Paul Mundt
ace2dc7d12 sh: wire up perf alignment and emulation faults.
This plugs in the alignment and emulation fault reporting for perf sw
events.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-13 06:55:26 +09:00
Russell King
841f48a849 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 2010-10-12 22:43:36 +01:00
Mika Westerberg
10d48b3934 ARM: 6440/1: ep93xx: DMA: fix channel_disable
When channel_disable() is called, it disables per channel interrupts and
waits until channels state becomes STATE_STALL, and then disables the
channel. Now, if the DMA transfer is disabled while the channel is in
STATE_NEXT we will not wait anything and disable the channel immediately.
This seems to cause weird data corruption for example in audio transfers.

Fix is to wait while we are in STATE_NEXT or STATE_ON and only then
disable the channel.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-12 22:43:19 +01:00
nohee ko
af73713642 staging: brcm80211: bug fix- rmmod hang problem
Bug fix - rmmod hang problem.
Can keep both of kthread & down_interruptible.
And in the meantime, can terminate the threads
properly during rmmod process.

Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 14:07:45 -07:00
Greg Kroah-Hartman
c11b0ef8fe Staging: brcm80211: remove sbpciregs_t typedef
don't use a typedef, use a 'struct'.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 14:04:26 -07:00
Anand Gadiyar
4de43a6b4c ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
Commit 346a5c890 (OMAP: control: move plat-omap/control.h
to mach-omap2/control.h) in the linux-omap tree removed
plat/control.h and most of its callers. This one slipped
through - breaking the build as below when
CONFIG_SND_OMAP_SOC_MCPDM is defined. Fix this.

  CC      sound/soc/omap/omap-mcpdm.o
sound/soc/omap/omap-mcpdm.c:35: fatal error: plat/control.h: No such file or directory
compilation terminated.
make[3]: *** [sound/soc/omap/omap-mcpdm.o] Error 1
make[2]: *** [sound/soc/omap] Error 2
make[1]: *** [sound/soc] Error 2
make: *** [sound] Error 2

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-12 13:25:31 -07:00
Vasiliy Kulikov
79fc3e2140 serial: omap-serial: fix signess error
"ret" is unsigned, so check for (ret < 0) made no sense.
Made it signed.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-12 13:22:42 -07:00
Greg Kroah-Hartman
3c2c926823 Staging: brcm80211: util: remove unneeded use of uintptr
uintptr shouldn't be used when you are just casting to a pointer anyway,
so remove it from these usages.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 13:20:38 -07:00
Greg Kroah-Hartman
e88cf8eb62 Staging: brcm80211: sys: remove unneeded use of uintptr
uintptr shouldn't be used when you are just casting to a pointer anyway,
so remove it from these usages.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 13:20:19 -07:00
Greg Kroah-Hartman
159a3b78f9 Staging: brcm80211: phy: remove unneeded use of uintptr
uintptr shouldn't be used when you are just casting to a pointer anyway,
so remove it from these usages.

Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-12 13:20:00 -07:00