Commit graph

254,637 commits

Author SHA1 Message Date
Jason Cooper
57c096b897 staging: brcm80211: fix checkpatch error 'assignment in if condition'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:22:24 -07:00
Jason Cooper
c74c95cd1f staging: brcm80211: fix checkpatch errors 'assignment in if condition'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:22:24 -07:00
Jason Cooper
eb7f37b3d5 staging: brcm80211: fix checkpatch error 'assignment in if condition'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:22:24 -07:00
Jason Cooper
b229fad289 staging: brcm80211: fix checkpatch error 'assignment in if condition'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:22:24 -07:00
Clemens Ladisch
9a0b379265 ALSA: oxygen: fix input monitor dB scale
The input monitor half volume bit results in a factor of 0.5, so the
minimum scale value should be -6 dB.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:23 +02:00
Clemens Ladisch
de0074ee7a ALSA: oxygen: fix chip ID register symbols
Rename the symbol for the XCID pins, fix up a decimal/hex confusion for
the CMI8787 package ID, and add the other known package IDs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:22 +02:00
Clemens Ladisch
d737f3eede ALSA: virtuoso: fix Xonar STX anti-pop delay
The anti-pop delay for the STX should be 800 ms, not 100 ms like the ST.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:20 +02:00
Clemens Ladisch
2b830bae1f ALSA: virtuoso: add HDAV1.3 Slim PCI ID
Add a PCI ID for the Xonar HDAV1.3 Slim.  There is no actual support,
but the presence of the ID allows the EEPROM repair code to work for
this card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:19 +02:00
Clemens Ladisch
b6ca8ab399 ALSA: oxygen: handle CD input configuration with a flag
There are more models without a CD input than with one, so handle this
explicitly with a device_config flag to avoid having to define a control
filter callback to filter it out.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:17 +02:00
Clemens Ladisch
45bc307f32 ALSA: virtuoso: fix Xonar DS chip name
The controller on the Xonar DS is labeled "AV66", not "AV200".

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:15 +02:00
Clemens Ladisch
422fdc318e ALSA: usb-audio: add more Yamaha USB MIDI devices
Add quirks for more devices (according to driver V.3.0.4-2).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-05 18:11:13 +02:00
Arnd Bergmann
2116b7a473 smbfs: move to drivers/staging
smbfs has been scheduled for removal in 2.6.27, so
maybe we can now move it to drivers/staging on the
way out.

smbfs still uses the big kernel lock and nobody
is going to fix that, so we should be getting
rid of it soon.

This removes the 32 bit compat mount and ioctl
handling code, which is implemented in common fs
code, and moves all smbfs related files into
drivers/staging/smbfs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:08:21 -07:00
Greg Kroah-Hartman
5af74aa5e9 Staging: autofs3: create TODO file
This lists what's going to happen to the filesystem (i.e. removal
in 2.6.38 unless someone steps up to maintain it.)

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:06:00 -07:00
Arnd Bergmann
db7bee24d2 autofs3: move to drivers/staging
Nobody appears to be interested in fixing autofs3 bugs
any more and it uses the BKL, which is going away.

Move this to staging for retirement. Unless someone
complains until 2.6.38, we can remove it for good.

The include/linux/auto_fs.h header file is still used
by autofs4, so it remains in place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@linux.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 09:03:39 -07:00
Fernando Guzman Lugo
d95ec7e2fd staging: tidspbridge: replace iommu custom for opensource implementation
Now the tidspbridge uses the API's from
iovmm module.

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:54:40 -07:00
Ernesto Ramos
0ee5ab30d1 staging: ti dspbridge: disable all peripherals at bridge_brd_stop
DSP Bridge needs to disable the peripheral clocks when switches to
BRD_STOPPED since that would prevent the domain to enter in OFF state.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:52:09 -07:00
Ernesto Ramos
d10009211c staging: ti dspbridge: Replace find_lcm with lcm kernel func
Resendig this patch since it was missed in the last merge...

Remove find_lcm within nldr.c and use standard
kernel function lcm().

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:52:08 -07:00
Ernesto Ramos
7d1d628344 staging: ti dspbridge: remove cmm_xlator_delete wrapper
Resending this patch since it was missed in the last merge...

Remove unnecessary cmm_xlator_delete function and use
kfree() kernel function directly.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:52:08 -07:00
Arnd Bergmann
44a17eff84 staging/bcm: add sparse annotations
This marks up the code where sparse complains in most cases.
Most of the changes are in the ioctl handling code, which
gets __user annotations, finding one unchecked user access.

The rest is mostly about marking functions static when they
are only used in one file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:50:15 -07:00
Arnd Bergmann
9f1c75ac2d staging/bcm: fix most build warnings
This removes all warnings I get on a 64 bit build except
for those that look unfixable, where we convert a pointer
to a 32 bit integer and change its byte order!

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:50:15 -07:00
Arnd Bergmann
2a953cfd42 staging/ft1000-usb: fix problems found by sparse
In the original code, address space annotations are missing,
which hides a possible unchecked user pointer access.

Two functions use a lot of stack space.

Extern declarations are all in the wrong place, which leads
to type differences between caller and callee in some cases.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:50:14 -07:00
Arnd Bergmann
7cfd8a3720 staging/ft1000-usb: fix build warnings
This lets us see clearer when stuff breaks.

Most of the changes are fixes for casts between int and pointer
that don't work on 64 bit.

The ioctl function uses a large amount of stack, which gets
fixed by allocating the buffer dynamically.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:50:14 -07:00
Arnd Bergmann
4fea0749b1 staging/ft1000-usb: fix unlocked_ioctl prototype
unlocked_ioctl has a "long" return type.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:50:14 -07:00
Arnd Bergmann
d16044cf8c staging: make new character devices nonseekable
As a preparation for changing the default behaviour of llseek to no_llseek,
every file_operations structure should have a .llseek operation.

There are three new instances in staging now, which can all be changed
into no_llseek explicitly since the devices do not need to seek.

Add nonseekable_open where appropriate, to prevent pread/pwrite as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05 08:50:14 -07:00
John W. Linville
b1a9338d5e Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6 2010-10-05 11:14:58 -04:00
Paul Mundt
d91ddc2553 sh: Wire up INTC subgroup splitting for SH7786 SCIF1.
SH7786 is the big user for subgroup splitting, mostly for the PCIe block,
but those will follow later. For now we simply split up SCIF1, as used by
the serial console on SDK7786 and others.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05 23:26:42 +09:00
Rahul Ruikar
1ab488de54 pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device
- pci_release_regions called during return error path.
- pci_disable_device called for cases where earlier it was enabled.
- code duplication avoided/reduced by adding resource release at goto statements.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-05 15:49:51 +02:00
ext Anand Gadiyar
4b48e6876b omap: zoom2/3: fix build caused by wl1271 support
Patch "omap: zoom: add mmc3/wl1271 device support" in the
wireless tree still uses .wires in struct omap2_hsmmc_info.
.wires has now been replaced with .caps in patch "omap: mmc:
extended to pass host capabilities from board file" in the
OMAP tree.

This causes linux-next as of 20101001 build to break as
below. Fix this.

  CC      arch/arm/mach-omap2/board-zoom-peripherals.o
arch/arm/mach-omap2/board-zoom-peripherals.c:217: error: unknown field 'wires' specified in initializer
make[1]: *** [arch/arm/mach-omap2/board-zoom-peripherals.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:58 +03:00
Luciano Coelho
5082b823f3 wl1271: remove deprecated __attribute__ ((packed))
One __attribute__ ((packed)) has been accidentally introduced in commit
be86cbea1e.  This patch changes it to __packed.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:53 +03:00
Juuso Oikarinen
644a48607c wl1271: Add extended radio parameter initialization
Currently a command to initialize extended radio parameter tables in the
hardware is missing.

Add the initialization

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:48 +03:00
Juuso Oikarinen
d25611da0c wl1271: Indicate disconnection on hardware failure
In the event of a hardware failure, reconfiguring a live connection back
with the wl1271 chip does not work as expected. The chip has management
features which require setting up the association from scratch to work
correctly. To ensure this is done every time, in managed mode, when associated,
indicate connection loss to the mac80211 before asking to reconfigure the
hardware.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:42 +03:00
Juuso Oikarinen
117b38d0b9 wl1271: Move work-init calls to hw allocation
Due to legacy reason, dating back to when the wl1251 and wl1271 still were
a unified driver, some work-structures are initialized on hardware startup.

The hardware recovery code creates a scenario in which it is possible for a
workstruct to be re-initialized while the work-function itself is running,
which causes a kernel WARNing and a subsequent reboot.

To remedy this, move the work initialization calls to the hw allocation,
which is the logically correct place for them anyway.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Tested-by: Tuomas Katila <ext-tuomas.2.katila@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:38 +03:00
Ido Yariv
a19606b433 wl1271: Support firmware TX packet aggregation
Instead of sending one packet at a time to the firmware, try to
send all available packets at once.
This optimization decreases the number of transactions, which saves
CPU cycles and increases network throughput.

Signed-off-by: Ido Yariv <ido@wizery.com>
Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:33 +03:00
Ido Yariv
1f37cbc936 wl1271: Support firmware RX packet aggregation
Instead of retrieving one packet at a time from the firmware, try to
retrieve all available packets at once.
This optimization decreases the number of transactions, which saves
CPU cycles and increases network throughput.

Signed-off-by: Ido Yariv <ido@wizery.com>
Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:29 +03:00
Ido Yariv
5c57a901dc wl1271: Handle large SPI transfers
The HW supports up to 4095 bytes transfers via SPI. The SPI read & write
operations do not handle larger transfers, causing the HW to stall in such
cases.

Fix this by fragmenting large transfers into smaller chunks, and
transferring each one separately.

Signed-off-by: Ido Yariv <ido@wizery.com>
Tested-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-10-05 16:27:24 +03:00
Paul Mundt
2be6bb0c79 sh: intc: Split up the INTC code.
This splits up the sh intc core in to something more vaguely resembling
a subsystem. Most of the functionality was alread fairly well
compartmentalized, and there were only a handful of interdependencies
that needed to be resolved in the process.

This also serves as future-proofing for the genirq and sparseirq rework,
which will make some of the split out functionality wholly generic,
allowing things to be killed off in place with minimal migration pain.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05 22:10:30 +09:00
Arnd Bergmann
2a48fc0ab2 block: autoconvert trivial BKL users to private mutex
The block device drivers have all gained new lock_kernel
calls from a recent pushdown, and some of the drivers
were already using the BKL before.

This turns the BKL into a set of per-driver mutexes.
Still need to check whether this is safe to do.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 15:01:10 +02:00
Arnd Bergmann
613655fa39 drivers: autoconvert trivial BKL users to private mutex
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.

None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.

Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.

These drivers do not seem to be under active
maintainance from my brief investigation. Apologies
to those maintainers that I have missed.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 15:01:04 +02:00
Stefano Stabellini
31e7e931cd xen: do not initialize PV timers on HVM if !xen_have_vector_callback
if !xen_have_vector_callback do not initialize PV timer unconditionally
because we still don't know how many cpus are available and if there is
more than one we won't be able to receive the timer interrupts on
cpu > 0.

This patch fixes an hang at boot when Xen does not support vector
callbacks and the guest has multiple vcpus.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2010-10-05 13:39:23 +01:00
Stefano Stabellini
a947f0f8f7 xen: do not set xenstored_ready before xenbus_probe on hvm
Register_xenstore_notifier should guarantee that the caller gets
notified even if xenstore is already up.
Therefore we revert "do not notify callers from
register_xenstore_notifier" and set xenstored_read at the right time for
PV on HVM guests too.
In fact in case of PV on HVM guests xenstored is ready only after the
platform pci driver has completed the initialization, so do not set
xenstored_ready before the call to xenbus_probe().

This patch fixes a shutdown_event watcher registration bug that causes
"xm shutdown" not to work properly.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2010-10-05 13:37:28 +01:00
Jason Wang
e0e9b40647 vhost: max s/g to match qemu
Qemu supports up to UIO_MAXIOV s/g so we have to match that because guest
drivers may rely on this.

Allocate indirect and log arrays dynamically to avoid using too much contigious
memory and make the length of hdr array to match the header length since each
iovec entry has a least one byte.

Test with copying large files w/ and w/o migration in both linux and windows
guests.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-05 13:33:43 +02:00
Russell King
cdaf9a2f28 ARM: fix section mismatch warnings in Versatile Express
WARNING: vmlinux.o(.text+0xbf30): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clocksource_init()
The function v2m_timer_init() references
the function __init sp804_clocksource_init().
This is often because v2m_timer_init lacks a __init
annotation or the annotation of sp804_clocksource_init is wrong.

WARNING: vmlinux.o(.text+0xbf3c): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clockevents_init()
The function v2m_timer_init() references
the function __init sp804_clockevents_init().
This is often because v2m_timer_init lacks a __init
annotation or the annotation of sp804_clockevents_init is wrong.

WARNING: vmlinux.o(.text+0xc524): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:l2x0_init()
The function ct_ca9x4_init() references
the function __init l2x0_init().
This is often because ct_ca9x4_init lacks a __init
annotation or the annotation of l2x0_init is wrong.

WARNING: vmlinux.o(.text+0xc530): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:clkdev_add_table()
The function ct_ca9x4_init() references
the function __init clkdev_add_table().
This is often because ct_ca9x4_init lacks a __init
annotation or the annotation of clkdev_add_table is wrong.

WARNING: vmlinux.o(.text+0xc578): Section mismatch in reference from the function ct_ca9x4_init() to the (unknown reference) .init.data:(unknown)
The function ct_ca9x4_init() references
the (unknown reference) __initdata (unknown).
This is often because ct_ca9x4_init lacks a __initdata
annotation or the annotation of (unknown) is wrong.

Fix these by making ct_ca9x4_init() and v2m_timer_init() both __init.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-05 11:30:40 +01:00
Jan Kara
beb37b85b0 ext3: Fix lost extented attributes for inode with ino == 11
If a filesystem has inode size > 128 and someone deletes lost+found and
reuses inode 11 for some other file, extented attributes set for this
inode before umount will get lost after remounting the filesystem. This
is because extended attributes will get stored in an inode but ext3_iget
will ignore them due to workaround of a bug in an old mkfs.

Fix the problem by initializing i_extra_isize to 0 for freshly allocated
inodes where mkfs workaround in ext3_iget applies. This way these inodes
will always store extended attributes in a special block and no problems
occur.

The bug was spotted and a reproduction test provided by:
  Masayoshi MIZUMA <m.mizuma@jp.fujitsu.com>

Reviewed-by: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-05 12:20:23 +02:00
Jan Kara
80f44b152c quota: Make QUOTACTL config be selected by its users
Remove "depends on" line from QUOTACTL config option and rather select
the option explicitely from config options which need it. It makes more
sense this way and also fixes Kconfig warning due to GFS2 selecting
QUOTACTL but QUOTACTL not depending on it.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-05 12:16:37 +02:00
Paul Mundt
d74310d3b1 sh: intc: Handle early lookups of subgroup IRQs.
If lookups happen while the radix node still points to a subgroup
mapping, an IRQ hasn't yet been made available for the specified id, so
error out accordingly. Once the slot is replaced with an IRQ mapping and
the tag is discarded, lookup can commence as normal.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05 18:13:23 +09:00
Felipe Contreras
5a44a73b90 autofs4: Only declare function when CONFIG_COMPAT is defined
The patch solves the following warnings message when CONFIG_COMPAT
is not defined:

fs/autofs4/root.c:31: warning: ‘autofs4_root_compat_ioctl’ declared ‘static’ but never defined

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Ian Kent <raven@themaw.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 11:02:15 +02:00
Márton Németh
26daad8067 autofs: Only declare function when CONFIG_COMPAT is defined
The patch solves the following warnings message when CONFIG_COMPAT
is not defined:

fs/autofs/root.c:30: warning: ‘autofs_root_compat_ioctl’ declared ‘static’ but never defined

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 11:02:15 +02:00
Petr Vandrovec
2a4df5d332 ncpfs: Lock socket in ncpfs while setting its callbacks
Otherwise partially updated pointers could be seen if
pointer update is not atomic.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-05 11:02:14 +02:00
Arnd Bergmann
b89f432133 fs/locks.c: prepare for BKL removal
This prepares the removal of the big kernel lock from the
file locking code. We still use the BKL as long as fs/lockd
uses it and ceph might sleep, but we can flip the definition
to a private spinlock as soon as that's done.
All users outside of fs/lockd get converted to use
lock_flocks() instead of lock_kernel() where appropriate.

Based on an earlier patch to use a spinlock from Matthew
Wilcox, who has attempted this a few times before, the
earliest patch from over 10 years ago turned it into
a semaphore, which ended up being slower than the BKL
and was subsequently reverted.

Someone should do some serious performance testing when
this becomes a spinlock, since this has caused problems
before. Using a spinlock should be at least as good
as the BKL in theory, but who knows...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
2010-10-05 11:02:04 +02:00
Tejun Heo
cdadf0097c workqueue: add queue_work and activate_work trace points
These two tracepoints allow tracking when and how a work is queued and
activated.  This patch is based on Frederic's patch to add queue_work
trace point.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
2010-10-05 10:49:55 +02:00