Commit graph

254,637 commits

Author SHA1 Message Date
Santosh Shilimkar
eb6a2c7550 omap: pm: Move set_pwrdm_state routine to common pm.c
The set_pwrdm_state() is needed on omap4 as well so move
this routine to common pm.c file so that it's available for omap3/4

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-23 17:14:11 -07:00
Santosh Shilimkar
315e2556f6 omap: pm-debug: Enable wakeup_timer_milliseconds debugfs entry
Commit 8e2efde9 added milliseconds suspend wakeup time support but
same interface is not exported through debugfs

This patch enables the debugfs hook for wakeup_timer_milliseconds

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-23 17:14:10 -07:00
Santosh Shilimkar
86b0c1e3c0 omap: pm-debug: Move common debug code to pm-debug.c
This patch moves omap2_pm_wakeup_on_timer() and pm debug entries
form pm34xx.c to pm-debug.c and export it, so that it is available
to other OMAPs

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-23 17:14:09 -07:00
Thara Gopinath
b3294e2327 OMAP4: pm.c extensions for OMAP4 support
OMAP4 has an iva device and a dsp devcice where as OMAP2/3
has only an iva device. In this file the iva device in the
system is registered under the name dsp_dev and the API
to retrieve the iva device is omap2_get_dsp_device.
This patch renames the dsp_dev to iva_dev, renames
omap2_get_dsp_device to omap2_get_iva_device,
registers dsp_dev for OMAP4 and adds a new API
omap4_get_dsp_device to retrieve the dep_dev.

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-23 17:14:08 -07:00
Kevin Hilman
e7410cf783 OMAP3: PM: move device-specific special cases from PM core into CPUidle
In an effort to simplify the core idle path, move any device-specific
special case handling from the core PM idle path into the CPUidle
pre-idle checking path.

This keeps the core, interrupts-disabled idle path streamlined and
independent of any device-specific handling, and also allows CPUidle
to do the checking only for certain C-states as needed.  This patch
has the device checks in place for all states with the CHECK_BM flag,
namely all states >= C2.

This patch was inspired by a similar patch written by Tero Kristo as
part of a larger series to add INACTIVE state support.

NOTE: This is a baby-step towards decoupling device idle (or system
idle) from CPU idle.  Eventually, CPUidle should only manage the CPU,
and device/system idle should be managed elsewhere.

Cc: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-23 17:13:50 -07:00
Daniel J Blueman
201ba4c432 vgaarb: trivial fix
Correct function being needlessly visible outside compilation unit
when the only users are internal.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:13:44 +10:00
Linus Torvalds
bcf835e52e Merge branch 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Fix reboot on Intel hosts
  KVM: fix irqfd assign/deassign race
2010-09-23 17:13:17 -07:00
Daniel J Blueman
4417d7f602 drm: radeon cleanup fixes...
Fix string interpreted as trigraph and typo.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:12:49 +10:00
Daniel J Blueman
d3147e86d7 drm: fix trivial coding errors
Correct function storage class, and correct assignment type.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:10:23 +10:00
Daniel J Blueman
0e57a3cc71 drm: ttm sparse fixes.
Correct allocation flags type and function prototype for ANSI C compliance.

[airlied: whitespace fixed]

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:09:08 +10:00
Ben Skeggs
a5d60827a6 drm/nouveau: fix panels using straps-based mode detection
nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant
entries.  This nukes the mode id initialised by drm_mode_create(), and
causes warnings from idr when we try to remove the mode.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24 10:05:28 +10:00
Greg Kroah-Hartman
efd89a2204 Staging: brcm80211: remove driver specific -W options
A single driver shouldn't be overriding the kernel-wide -W options.
This removes them from the Makefile.

Bonus is that the code at least now will build on a 64bit platform.
Problem is that both drivers can't be built at the same time right now
or bad things happen when linking.

Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Cc: jason <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-23 16:36:06 -07:00
Greg Kroah-Hartman
449c6741b6 Staging: brcm80211: clean up makefile cflag lines
Change to use the proper ccflags-y option, as well as splitting the
options out one-per-line so that we can see what is needed to be cleaned
up and removed over time.

Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Cc: jason <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-23 16:28:53 -07:00
Joe Perches
df0a59a14c [IA64] Remove unnecessary casts of private_data in perfmon.c
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23 14:34:56 -07:00
Eric Dumazet
a02cec2155 net: return operator cleanup
Change "return (EXPR);" to "return EXPR;"

return is not a function, parentheses are not required.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23 14:33:39 -07:00
Jesse Brandeburg
6a08d194ee e1000: use GRO for receive
E1000 can benefit from calling the GRO receive functions.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23 14:33:38 -07:00
Jesse Brandeburg
338c15e470 e1000: fix occasional panic on unload
Net drivers in general have an issue where timers fired
by mod_timer or work threads with schedule_work are running
outside of the rtnl_lock.

With no other lock protection these routines are vulnerable
to races with driver unload or reset paths.

The longer term solution to this might be a redesign with
safer locks being taken in the driver to guarantee no
reentrance, but for now a safe and effective fix is
to take the rtnl_lock in these routines.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23 14:33:38 -07:00
Jesse Brandeburg
5cf42fcda0 e1000: use work queues
E1000 is using several timers that in a follow on patch
will need to acquire the rtnl_lock in order to be safe.

This patch moves the timer bodies into work queues which
will allow the next patch to add rtnl_lock.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-23 14:33:37 -07:00
Julia Lawall
ddad53ee8a [IA64] Fix missing iounmap in error path in cyclone.c
By moving the iounmap up above the test, it takes place whether the test
succeeds or fails.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23 14:32:09 -07:00
Thomas Gleixner
383f9f1741 [IA64] salinfo: sema_init instead of init_MUTEX
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23 14:28:34 -07:00
Nikitas Angelinas
3e6b1b25a9 [IA64] xen: use ARRAY_SIZE macro in xen_pv_ops.c
Replace sizeof(xen_branch_target) / sizeof(xen_branch_target[0]) with
ARRAY_SIZE(xen_branch_target) in arch/ia64/xen/xen_pv_ops.c

Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23 14:26:30 -07:00
Joe Perches
c216488cd1 [IA64] Use static const char * const in palinfo.c
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23 14:22:05 -07:00
Srinivas Eeda
5dad6c39d1 o2dlm: force free mles during dlm exit
While umounting, a block mle doesn't get freed if dlm is shutdown after
master request is received but before assert master. This results in unclean
shutdown of dlm domain.

This patch frees all mles that lie around after other nodes were notified about
exiting the dlm and marking dlm state as leaving. Only block mles are expected
to be around, so we log ERROR for other mles but still free them.

Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-23 14:16:53 -07:00
Tao Ma
0000b86202 ocfs2: Sync inode flags with ext2.
We sync our inode flags with ext2 and define them by hex
values. But actually in commit 3669567(4 years ago), all
these values are moved to include/linux/fs.h. So we'd
better also use them as what ext2 did. So sync our inode
flags with ext2 by using FS_*.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-23 14:16:49 -07:00
Tao Ma
4a452de4fd ocfs2: Move 'wanted' into parens of ocfs2_resmap_resv_bits.
The first time I read the function ocfs2_resmap_resv_bits, I consider
about what 'wanted' will be used and consider about the comments.
Then I find it is only used if the reservation is empty. ;)

So we'd better move it to the parens so that it make the code more
readable, what's more, ocfs2_resmap_resv_bits is used so frequently
and we should save some cpus.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-23 14:16:47 -07:00
Tao Ma
47dea42379 ocfs2: Use cpu_to_le16 for e_leaf_clusters in ocfs2_bg_discontig_add_extent.
e_leaf_clusters is a le16, so use cpu_to_le16 instead
of cpu_to_le32.

What's more, we change 'clusters' to unsigned int to
signify that the size of 'clusters' isn't important here.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-23 14:16:34 -07:00
Tao Ma
12828061cd ocfs2: update ctime when changing the file's permission by setfacl
In commit 30e2bab, ext3 fixed it. So change it accordingly in ocfs2.

Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1283760364
# setfacl -m  'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1283760364

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-23 14:16:21 -07:00
Simon Guinot
cc60f8878e dmaengine: fix interrupt clearing for mv_xor
When using simultaneously the two DMA channels on a same engine, some
transfers are never completed. For example, an endless lock can occur
while writing heavily on a RAID5 array (with async-tx offload support
enabled).

Note that this issue can also be reproduced by using the DMA test
client.

On a same engine, the interrupt cause register is shared between two
DMA channels. This patch make sure that the cause bit is only cleared
for the requested channel.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Tested-by: Luc Saillard <luc@saillard.org>
Acked-by: saeed bishara <saeed.bishara@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-23 14:14:22 -07:00
Tony Luck
48a4b30124 [IA64] remove asm/compat.h
Missed this file in commit 32974ad490
   [IA64] Remove COMPAT_IA32 support

It is no longer needed, so remove it.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23 14:02:09 -07:00
Tony Luck
85718fae2a [IA64] Add CONFIG_STACKTRACE_SUPPORT
Several Linux features are dependent on stack trace support. Add
it so they can be enabled.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-09-23 13:52:07 -07:00
Linus Torvalds
91e71c12c5 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  thinkpad-acpi: avoid keymap pitfall
  Change MSI LAPTOP driver maintainer to Lee, Chun-Yi
2010-09-23 13:30:13 -07:00
Henrique de Moraes Holschuh
fc6e756894 thinkpad-acpi: avoid keymap pitfall
Change the code so that it will use the correct size for keymap entries.
Do it in a way that makes it harder to screw it up in the future.

Reported-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-09-23 15:42:04 -04:00
Lee, Chun-Yi
58e226c6d4 Change MSI LAPTOP driver maintainer to Lee, Chun-Yi
Change MSI LAPTOP driver maintainer from Lennart Poettering to Lee, Chun-Yi.

MSI is a Taiwan OEM company, Lee, Chun-Yi can more easy to contact with MSI
and maintain msi-laptop driver.
Thank's for Lennart Poettering's contribute, Lee, Chun-Yi will base on his
article to continue maintain the msi-laptop driver.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-09-23 15:42:00 -04:00
Paul Mundt
3f224f4e05 sh: provide generic arch_debugfs_dir.
While sh previously had its own debugfs root, there now exists a
common arch_debugfs_dir prototype, so we switch everything over to
that.  Presumably once more architectures start making use of this
we'll be able to just kill off the stub kdebugfs wrapper.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-24 04:04:26 +09:00
Dimitris Papastamos
005d65fbac ASoC: Fix incorrect parameter to snd_soc_codec_volatile_register
We need to pass the register index and not the register value.
This patch depends on my previous patch "ASoC: Delegate to hw
specific read for volatile registers".

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-23 19:48:16 +01:00
Dimitris Papastamos
db49c146a8 ASoC: Delegate to hw specific read for volatile registers
Ensure that reads on volatile registers will correctly delegate
to the bus specific read function.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-09-23 19:48:11 +01:00
Suresh Jayaraman
7c563cc9f3 nfs: show "local_lock" mount option in /proc/mounts
Display the status of 'local_lock' mount option in /proc/mounts.


Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 14:26:48 -04:00
Daniel Drake
3e3c486012 x86, olpc: Rework BIOS signature check
The XO-1.5 laptop is not currently detected as an OLPC machine because
it fails this XO-1-centric check.

Now that we have OLPC OFW support in the kernel, a more sensible
check is to see if we found OFW during boot and check the architecture
property.

Also remove a now-meaningless codepath, as we're always going to have
OFW support with OLPC.

Signed-off-by: Daniel Drake <dsd@laptop.org>
LKML-Reference: <20100923162846.D8D409D401B@zog.reactivated.net>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-23 11:15:00 -07:00
Daniel Drake
76fb657017 x86, olpc: Only enable PCI configuration type override on XO-1
This configuration type override is for XO-1 only and must not happen
on XO-1.5.

Signed-off-by: Daniel Drake <dsd@laptop.org>
LKML-Reference: <20100923162805.0F6549D401B@zog.reactivated.net>
Cc: Andres Solomon <dilinger@queued.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-23 11:14:18 -07:00
Bart Oldeman
6554287b1d x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers.
Impact: fix kernel bug such as:
BUG: scheduling while atomic: dosemu.bin/19680/0x00000004
See also Ubuntu bug 455067 at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/455067

Commits 4915a35e35
("Use preempt_conditional_sti/cli in do_int3, like on x86_64.")
and 3d2a71a596
("x86, traps: converge do_debug handlers")
started disabling preemption in int1 and int3 handlers on i386.
The problem with vm86 is that the call to handle_vm86_trap() may jump
straight to entry_32.S and never returns so preempt is never enabled
again, and there is an imbalance in the preempt count.

Commit be716615fe ("x86, vm86:
fix preemption bug"), which was later (accidentally?) reverted by commit
08d68323d1 ("hw-breakpoints: modifying
generic debug exception to use thread-specific debug registers")
fixed the problem for debug exceptions but not for breakpoints.

There are three solutions to this problem.

1. Reenable preemption before calling handle_vm86_trap(). This
was the approach that was later reverted.

2. Do not disable preemption for i386 in breakpoint and debug handlers.
This was the situation before October 2008. As far as I understand
preemption only needs to be disabled on x86_64 because a seperate stack is
used, but it's nice to have things work the same way on
i386 and x86_64.

3. Let handle_vm86_trap() return instead of jumping to assembly code.
By setting a flag in _TIF_WORK_MASK, either TIF_IRET or TIF_NOTIFY_RESUME,
the code in entry_32.S is instructed to return to 32 bit mode from
V86 mode. The logic in entry_32.S was already present to handle signals.
(I chose TIF_IRET because it's slightly more efficient in
do_notify_resume() in signal.c, but in fact TIF_IRET can probably be
replaced by TIF_NOTIFY_RESUME everywhere.)

I'm submitting approach 3, because I believe it is the most elegant
and prevents future confusion. Still, an obvious
preempt_conditional_cli(regs); is necessary in traps.c to correct the
bug.

[ hpa: This is technically a regression, but because:
  1. the regression is so old,
  2. the patch seems relatively high risk, justifying more testing, and
  3. we're late in the 2.6.36-rc cycle,

  I'm queuing it up for the 2.6.37 merge window.  It might, however,
  justify as a -stable backport at a latter time, hence Cc: stable. ]

Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net>
LKML-Reference: <alpine.DEB.2.00.1009231312330.4732@localhost.localdomain>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: <stable@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-23 11:07:49 -07:00
Tony Lindgren
9af2ebbd09 Merge branch 'hwmod_2.6.37' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-09-23 11:05:25 -07:00
Cory Maccarrone
493c32a0de HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046
This change adds in MMC and I2C support to the HTC Herald board, as well
as adding the HTCPLD driver for the PLD used on this phone.  It also
adds in the gpio-keys entries for the front directional keys and
selector and the cursor keys on the slide-out keyboard, and gpio-leds
support for the LEDs attached to the htcpld.

Additionally, SPI bus support (using the spi100k driver) and
touchscreen support (using the ads7846 driver) were added.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-23 11:05:17 -07:00
Vince Weaver
4e7d7c6018 ALSA: hda - MacBookPro 5,3 line-in support
I've found the following patch is necessary to enable line-in on
my MacBookPro 5,3 machine.  With the patch applied I've successfully
recorded audio from the line-in jack.  This is based on the existing
5,5 support.

Signed-off-by: Vince Weaver <vweaver1@eecs.utk.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-23 19:40:46 +02:00
Mark Salter
ed3473b18f MN10300: Arch doesn't support HAVE_ARCH_TRACEHOOK
Remove specification of HAVE_ARCH_TRACEHOOK for MN10300 as the arch does not
support it at this time.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-23 10:20:58 -07:00
Mark Salter
a6ef9c8f16 MN10300: Fix SIGRTMAX
SIGRTMAX should be _NSIG not _NSIG-1.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-23 10:20:57 -07:00
Thomas Gleixner
d1ea13c6e2 genirq: Cleanup irq_chip->typename leftovers
3 years transition phase is enough. Cleanup the last users and remove
the cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Leo Chen <leochen@broadcom.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
2010-09-23 19:12:26 +02:00
Benny Halevy
ef84303ebc NFS: handle inode==NULL in __put_nfs_open_context
inode may be NULL when put_nfs_open_context is called from nfs_atomic_lookup
before d_add_unique(dentry, inode)

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-23 12:22:09 -04:00
Paul E. McKenney
2dfbf4dfbe rcu: Add advice to PROVE_RCU_REPEATEDLY kernel config parameter
The PROVE_RCU_REPEATEDLY has no "Say Y"/"Say N" advice, so this commit
adds it.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-09-23 09:16:54 -07:00
Paul E. McKenney
269dcc1c2e rcu: Add tracing data to support queueing models
The current tracing data is not sufficient to deduce the average time
that a callback spends waiting for a grace period to end.  Add three
per-CPU counters recording the number of callbacks invoked (ci), the
number of callbacks orphaned (co), and the number of callbacks adopted
(ca).  Given the existing callback queue length (ql), the average wait
time in absence of CPU hotplug operations is ql/ci.  The units of wait
time will be in terms of the duration over which ci was measured.

In the presence of CPU hotplug operations, there is room for argument,
but ql/(ci-co+ca) won't steer you too far wrong.

Also fixes a typo called out by Lucas De Marchi <lucas.de.marchi@gmail.com>.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-09-23 09:16:53 -07:00
Paul E. McKenney
0ddea0ead2 rcu: fix sparse errors in rcutorture.c
Add the sparse __rcu address-space identifier and make a couple of
variables static.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-09-23 09:16:42 -07:00