mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-02 19:05:42 +00:00
12,385 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andrii Nakryiko
|
c91ab90cea |
selftests/bpf: revert iter test subprog precision workaround
Now that precision propagation is supported fully in the presence of
subprogs, there is no need to work around iter test. Revert original
workaround.
This reverts
|
||
|
Andrii Nakryiko
|
3ef3d2177b |
selftests/bpf: add precision propagation tests in the presence of subprogs
Add a bunch of tests validating verifier's precision backpropagation
logic in the presence of subprog calls and/or callback-calling
helpers/kfuncs.
We validate the following conditions:
- subprog_result_precise: static subprog r0 result precision handling;
- global_subprog_result_precise: global subprog r0 precision
shortcutting, similar to BPF helper handling;
- callback_result_precise: similarly r0 marking precise for
callback-calling helpers;
- parent_callee_saved_reg_precise, parent_callee_saved_reg_precise_global:
propagation of precision for callee-saved registers bypassing
static/global subprogs;
- parent_callee_saved_reg_precise_with_callback: same as above, but in
the presence of callback-calling helper;
- parent_stack_slot_precise, parent_stack_slot_precise_global:
similar to above, but instead propagating precision of stack slot
(spilled SCALAR reg);
- parent_stack_slot_precise_with_callback: same as above, but in the
presence of callback-calling helper;
- subprog_arg_precise: propagation of precision of static subprog's
input argument back to caller;
- subprog_spill_into_parent_stack_slot_precise: negative test
validating that verifier currently can't support backtracking of stack
access with non-r10 register, we validate that we fallback to
forcing precision for all SCALARs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230505043317.3629845-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Andrii Nakryiko
|
c50c0b57a5 |
bpf: fix mark_all_scalars_precise use in mark_chain_precision
When precision backtracking bails out due to some unsupported sequence of instructions (e.g., stack access through register other than r10), we need to mark all SCALAR registers as precise to be safe. Currently, though, we mark SCALARs precise only starting from the state we detected unsupported condition, which could be one of the parent states of the actual current state. This will leave some registers potentially not marked as precise, even though they should. So make sure we start marking scalars as precise from current state (env->cur_state). Further, we don't currently detect a situation when we end up with some stack slots marked as needing precision, but we ran out of available states to find the instructions that populate those stack slots. This is akin the `i >= func->allocated_stack / BPF_REG_SIZE` check and should be handled similarly by falling back to marking all SCALARs precise. Add this check when we run out of states. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230505043317.3629845-8-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
1ef22b6865 |
bpf: maintain bitmasks across all active frames in __mark_chain_precision
Teach __mark_chain_precision logic to maintain register/stack masks across all active frames when going from child state to parent state. Currently this should be mostly no-op, as precision backtracking usually bails out when encountering subprog entry/exit. It's not very apparent from the diff due to increased indentation, but the logic remains the same, except everything is done on specific `fr` frame index. Calls to bt_clear_reg() and bt_clear_slot() are replaced with frame-specific bt_clear_frame_reg() and bt_clear_frame_slot(), where frame index is passed explicitly, instead of using current frame number. We also adjust logging to emit affected frame number. And we also add better logging of human-readable register and stack slot masks, similar to previous patch. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230505043317.3629845-6-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
d9439c21a9 |
bpf: improve precision backtrack logging
Add helper to format register and stack masks in more human-readable format. Adjust logging a bit during backtrack propagation and especially during forcing precision fallback logic to make it clearer what's going on (with log_level=2, of course), and also start reporting affected frame depth. This is in preparation for having more than one active frame later when precision propagation between subprog calls is added. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230505043317.3629845-5-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
5956f30116 |
veristat: add -t flag for adding BPF_F_TEST_STATE_FREQ program flag
Sometimes during debugging it's important that BPF program is loaded
with BPF_F_TEST_STATE_FREQ flag set to force verifier to do frequent
state checkpointing. Teach veristat to do this when -t ("test state")
flag is specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230505043317.3629845-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
Stephen Veiss
|
64276f01dc |
selftests/bpf: Test_progs can read test lists from file
Improve test selection logic when using -a/-b/-d/-t options. The list of tests to include or exclude can now be read from a file, specified as @<filename>. The file contains one name (or wildcard pattern) per line, and comments beginning with # are ignored. These options can be passed multiple times to read more than one file. Signed-off-by: Stephen Veiss <sveiss@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230427225333.3506052-3-sveiss@meta.com |
||
|
Stephen Veiss
|
0a5c0de8b6 |
selftests/bpf: Extract insert_test from parse_test_list
Split the logic to insert new tests into test filter sets out from parse_test_list. Fix the subtest insertion logic to reuse an existing top-level test filter, which prevents the creation of duplicate top-level test filters each with a single subtest. Signed-off-by: Stephen Veiss <sveiss@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230427225333.3506052-2-sveiss@meta.com |
||
Martin KaFai Lau
|
31f4f810d5 |
selftests/bpf: Add fexit_sleep to DENYLIST.aarch64
It is reported that the fexit_sleep never returns in aarch64. The remaining tests cannot start. Put this test into DENYLIST.aarch64 for now so that other tests can continue to run in the CI. Acked-by: Manu Bretelle <chantr4@gmail.com> Reported-by: Manu Bretelle <chantra@meta.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> |
||
Yonghong Song
|
f1f5553d91 |
selftests/bpf: Fix selftest test_global_funcs/global_func1 failure with latest clang
The selftest test_global_funcs/global_func1 failed with the latest clang17.
The reason is due to upstream ArgumentPromotionPass ([1]),
which may manipulate static function parameters and cause inlining
although the funciton is marked as noinline.
The original code:
static __attribute__ ((noinline))
int f0(int var, struct __sk_buff *skb)
{
return skb->len;
}
__attribute__ ((noinline))
int f1(struct __sk_buff *skb)
{
...
return f0(0, skb) + skb->len;
}
...
SEC("tc")
__failure __msg("combined stack size of 4 calls is 544")
int global_func1(struct __sk_buff *skb)
{
return f0(1, skb) + f1(skb) + f2(2, skb) + f3(3, skb, 4);
}
After ArgumentPromotionPass, the code is translated to
static __attribute__ ((noinline))
int f0(int var, int skb_len)
{
return skb_len;
}
__attribute__ ((noinline))
int f1(struct __sk_buff *skb)
{
...
return f0(0, skb->len) + skb->len;
}
...
SEC("tc")
__failure __msg("combined stack size of 4 calls is 544")
int global_func1(struct __sk_buff *skb)
{
return f0(1, skb->len) + f1(skb) + f2(2, skb) + f3(3, skb, 4);
}
And later llvm InstCombine phase recognized that f0()
simplify returns the value of the second argument and removed f0()
completely and the final code looks like:
__attribute__ ((noinline))
int f1(struct __sk_buff *skb)
{
...
return skb->len + skb->len;
}
...
SEC("tc")
__failure __msg("combined stack size of 4 calls is 544")
int global_func1(struct __sk_buff *skb)
{
return skb->len + f1(skb) + f2(2, skb) + f3(3, skb, 4);
}
If f0() is not inlined, the verification will fail with stack size
544 for a particular callchain. With f0() inlined, the maximum
stack size is 512 which is in the limit.
Let us add a `asm volatile ("")` in f0() to prevent ArgumentPromotionPass
from hoisting the code to its caller, and this fixed the test failure.
[1] https://reviews.llvm.org/D148269
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230425174744.1758515-1-yhs@fb.com
|
||
Florent Revest
|
a464411920 |
selftests/bpf: Update the aarch64 tests deny list
Now that ftrace supports direct call on arm64, BPF tracing programs work on that architecture. This fixes the vast majority of BPF selftests except for: - multi_kprobe programs which require fprobe, not available on arm64 yet - tracing_struct which requires trampoline support to access struct args This patch updates the list of BPF selftests which are known to fail so the BPF CI can validate the tests which pass now. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20230427143207.635263-1-revest@chromium.org |
||
Jesper Dangaard Brouer
|
bb32347876 |
selftests/bpf: xdp_hw_metadata track more timestamps
To correlate the hardware RX timestamp with something, add tracking of two software timestamps both clock source CLOCK_TAI (see description in man clock_gettime(2)). XDP metadata is extended with xdp_timestamp for capturing when XDP received the packet. Populated with BPF helper bpf_ktime_get_tai_ns(). I could not find a BPF helper for getting CLOCK_REALTIME, which would have been preferred. In userspace when AF_XDP sees the packet another software timestamp is recorded via clock_gettime() also clock source CLOCK_TAI. Example output shortly after loading igc driver: poll: 1 (0) skip=1 fail=0 redir=2 xsk_ring_cons__peek: 1 0x12557a8: rx_desc[1]->addr=100000000009000 addr=9100 comp_addr=9000 rx_hash: 0x82A96531 with RSS type:0x1 rx_timestamp: 1681740540304898909 (sec:1681740540.3049) XDP RX-time: 1681740577304958316 (sec:1681740577.3050) delta sec:37.0001 (37000059.407 usec) AF_XDP time: 1681740577305051315 (sec:1681740577.3051) delta sec:0.0001 (92.999 usec) 0x12557a8: complete idx=9 addr=9000 The first observation is that the 37 sec difference between RX HW vs XDP timestamps, which indicate hardware is likely clock source CLOCK_REALTIME, because (as of this writing) CLOCK_TAI is initialised with a 37 sec offset. The 93 usec (microsec) difference between XDP vs AF_XDP userspace is the userspace wakeup time. On this hardware it was caused by CPU idle sleep states, which can be reduced by tuning /dev/cpu_dma_latency. View current requested/allowed latency bound via: hexdump --format '"%d\n"' /dev/cpu_dma_latency More explanation of the output and how this can be used to identify clock drift for the HW clock can be seen here[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/hints/xdp_hints_kfuncs02_driver_igc.org Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Yoong Siang <yoong.siang.song@intel.com> Link: https://lore.kernel.org/bpf/168182466298.616355.2544377890818617459.stgit@firesoul |
||
Daniel Borkmann
|
b3e8701dd1 |
selftests/bpf: Add test case to assert precise scalar path pruning
Add a test case to check for precision marking of safe paths. Ensure that the verifier will not prematurely prune scalars contributing to registers needing precision. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
Joanne Koong
|
d911ba7cea |
selftests/bpf: Add tests for dynptr convenience helpers
Add various tests for the added dynptr convenience helpers. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230420071414.570108-6-joannelkoong@gmail.com |
||
Linus Torvalds
|
6e98b09da9 |
Networking changes for 6.4.
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
|
||
Paolo Abeni
|
c248b27cfc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Linus Torvalds
|
793582ff47 |
ACPI updates for 6.4-rc1
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
* Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
* Add missing tables to astable (Pedro Falcato).
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
* Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
* Add support for ClockInput resource (v6.5) (Niyas Sait).
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
* Make ACPICA code support flexible arrays properly (Kees Cook).
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
* Add os specific support for Zephyr RTOS to ACPICA (Najumon).
* Update version to 20230331 (Bob Moore).
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue).
- Add CXL error types to the error injection code in APEI (Tony Luck).
- Refactor acpi_data_prop_read_single() (Andy Shevchenko).
- Fix two issues in the ACPI SBS driver (Armin Wolf).
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi).
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K).
- Update the pm_profile sysfs attribute documentation (Rafael Wysocki).
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRGvLQSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxoV4P/jxWGAdldtgXORR58lKGbSs6lx/0Y+SF
iI7qK88NcbcbWS+a3PqRrisNkjN17rjzajfp28Ue2CXFxzwTViyw6KYELbPJ6N/h
/3prem++jKgf7qiueDJG/AyO8N2+Z+yciubhxdMiK1+c1dZM2ycwSyBzJgYocpXn
fH+YFPhxE7c8Z8doBrTOZjRuU4SIEKCmxo3c5BbCuyVZkbqCRdQMIDCiBJgLTmbo
z4pu9OFhAamB8Cth2QFfRbZWqmuY71Gt54+c4ITPPV2ALlLUYODyHZoSISBJULp3
k0lU/hMCD+i1WRwv+Bb6of7pJPM4Lqp+wOirAtiiibjE9LRxVTNyOUAHLXbx+t2V
PN8JKVJVCLaZO6TRELgFIL4nh4aBdOtr4BuaLnClZho9bG68jEkc8grnOZYhFYtM
66BuJBW30rwwGY4N5VSZGzFFR7l2qaHIOSHdq681bxQ3e6erFEeIc5jQVEOKgCqd
XWdELVkqf3CnCX0lgonj+AgoeCqOpYdrNcWqMsJ+6OyQRoFhLFltDSPeJm9gHGO7
X+qCQru4ZgEDKexWKpGgH9x8AllDKbh/ApyyumXgsQOsRocVdoNaf+yCBlaaDyqu
UYif6hgFYnIxF2Fg1r/POgHDXFobE4iUTHcUU1V2QhuByc4PkN9ljKsHeC2FgVUz
JityWRiMABNv
=O61K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
|
||
|
Linus Torvalds
|
e7989789c6 |
Timers and timekeeping updates:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relcations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they fail
to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up
in the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context
of different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource is
installed, i.e. timekeeping is still tick based and the tick period
advances from there.
The early enablement of sched_clock() broke this alignement as the time
accumulated by sched_clock() is taken into account when timekeeping is
initialized. So the base value now(CLOCK_MONOTONIC) is not longer a
multiple of tick periods, which breaks applications which relied on
that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements
- Cure the concurrent writer race for idle and IO sleeptime statistics
The statitic values which are exposed via /proc/stat are updated from
the CPU local idle exit and remotely by cpufreq, but that happens
without any form of serialization. As a consequence sleeptimes can be
accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
- Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race with
idle exit updates. As a consequence the readout may result in random
and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing the
remote runqueues nr_iowait counter. The latter is impossible to fix,
so the only way to deal with that is to document it properly and to
remove the assertion in the selftest which triggers occasionally due
to that.
- Restructure struct tick_sched for better cache layout
- Some small cleanups and a better cache layout for struct tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU timers
For unknown reason the introduction of the timer_wait_running() callback
missed to fixup posix CPU timers, which went unnoticed for almost four
years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels, it
turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems
there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers
out from hard interrupt context to task work, which is handled before
returning to user space or to a VM. The expiry mechanism moves the
expired timers to a stack local list head with sighand lock held. Once
sighand is dropped the task can be preempted and a task which wants to
delete a timer will spin-wait until the expiry task is scheduled back
in. In the worst case this will end up in a livelock when the preempting
task and the expiry task are pinned on the same CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry task
hold it accross the expiry function and let the deleting task which
waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra mutex_lock()/unlock()
pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents the
livelock and cures the problem for RT and !RT systems.
-----BEGIN PGP SIGNATURE-----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=SVnj
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
- Improve the VDSO build time checks to cover all dynamic relocations
VDSO does not allow dynamic relocations, but the build time check is
incomplete and fragile.
It's based on architectures specifying the relocation types to search
for and does not handle R_*_NONE relocation entries correctly.
R_*_NONE relocations are injected by some GNU ld variants if they
fail to determine the exact .rel[a]/dyn_size to cover trailing zeros.
R_*_NONE relocations must be ignored by dynamic loaders, so they
should be ignored in the build time check too.
Remove the architecture specific relocation types to check for and
validate strictly that no other relocations than R_*_NONE end up in
the VSDO .so file.
- Prefer signal delivery to the current thread for
CLOCK_PROCESS_CPUTIME_ID based posix-timers
Such timers prefer to deliver the signal to the main thread of a
process even if the context in which the timer expires is the current
task. This has the downside that it might wake up an idle thread.
As there is no requirement or guarantee that the signal has to be
delivered to the main thread, avoid this by preferring the current
task if it is part of the thread group which shares sighand.
This not only avoids waking idle threads, it also distributes the
signal delivery in case of multiple timers firing in the context of
different threads close to each other better.
- Align the tick period properly (again)
For a long time the tick was starting at CLOCK_MONOTONIC zero, which
allowed users space applications to either align with the tick or to
place a periodic computation so that it does not interfere with the
tick. The alignement of the tick period was more by chance than by
intention as the tick is set up before a high resolution clocksource
is installed, i.e. timekeeping is still tick based and the tick
period advances from there.
The early enablement of sched_clock() broke this alignement as the
time accumulated by sched_clock() is taken into account when
timekeeping is initialized. So the base value now(CLOCK_MONOTONIC) is
not longer a multiple of tick periods, which breaks applications
which relied on that behaviour.
Cure this by aligning the tick starting point to the next multiple of
tick periods, i.e 1000ms/CONFIG_HZ.
- A set of NOHZ fixes and enhancements:
* Cure the concurrent writer race for idle and IO sleeptime
statistics
The statitic values which are exposed via /proc/stat are updated
from the CPU local idle exit and remotely by cpufreq, but that
happens without any form of serialization. As a consequence
sleeptimes can be accounted twice or worse.
Prevent this by restricting the accumulation writeback to the CPU
local idle exit and let the remote access compute the accumulated
value.
* Protect idle/iowait sleep time with a sequence count
Reading idle/iowait sleep time, e.g. from /proc/stat, can race
with idle exit updates. As a consequence the readout may result
in random and potentially going backwards values.
Protect this by a sequence count, which fixes the idle time
statistics issue, but cannot fix the iowait time problem because
iowait time accounting races with remote wake ups decrementing
the remote runqueues nr_iowait counter. The latter is impossible
to fix, so the only way to deal with that is to document it
properly and to remove the assertion in the selftest which
triggers occasionally due to that.
* Restructure struct tick_sched for better cache layout
* Some small cleanups and a better cache layout for struct
tick_sched
- Implement the missing timer_wait_running() callback for POSIX CPU
timers
For unknown reason the introduction of the timer_wait_running()
callback missed to fixup posix CPU timers, which went unnoticed for
almost four years.
While initially only targeted to prevent livelocks between a timer
deletion and the timer expiry function on PREEMPT_RT enabled kernels,
it turned out that fixing this for mainline is not as trivial as just
implementing a stub similar to the hrtimer/timer callbacks.
The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled
systems there is a livelock issue independent of RT.
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU
timers out from hard interrupt context to task work, which is handled
before returning to user space or to a VM. The expiry mechanism moves
the expired timers to a stack local list head with sighand lock held.
Once sighand is dropped the task can be preempted and a task which
wants to delete a timer will spin-wait until the expiry task is
scheduled back in. In the worst case this will end up in a livelock
when the preempting task and the expiry task are pinned on the same
CPU.
The timer wheel has a timer_wait_running() mechanism for RT, which
uses a per CPU timer-base expiry lock which is held by the expiry
code and the task waiting for the timer function to complete blocks
on that lock.
This does not work in the same way for posix CPU timers as there is
no timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry
lock can be used too in a slightly different way.
Add a per task mutex to struct posix_cputimers_work, let the expiry
task hold it accross the expiry function and let the deleting task
which waits for the expiry to complete block on the mutex.
In the non-contended case this results in an extra
mutex_lock()/unlock() pair on both sides.
This avoids spin-waiting on a task which is scheduled out, prevents
the livelock and cures the problem for RT and !RT systems
* tag 'timers-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Implement the missing timer_wait_running callback
selftests/proc: Assert clock_gettime(CLOCK_BOOTTIME) VS /proc/uptime monotonicity
selftests/proc: Remove idle time monotonicity assertions
MAINTAINERS: Remove stale email address
timers/nohz: Remove middle-function __tick_nohz_idle_stop_tick()
timers/nohz: Add a comment about broken iowait counter update race
timers/nohz: Protect idle/iowait sleep time under seqcount
timers/nohz: Only ever update sleeptime from idle exit
timers/nohz: Restructure and reshuffle struct tick_sched
tick/common: Align tick period with the HZ tick.
selftests/timers/posix_timers: Test delivery of signals across threads
posix-timers: Prefer delivery of signals to the current thread
vdso: Improve cmd_vdso_check to check all dynamic relocations
|
||
|
Linus Torvalds
|
15bbeec0fe |
Update for entry and ptrace:
Provide a ptrace set/get interface for syscall user dispatch. The main purpose is to enable checkpoint/restore (CRIU) to handle processes which utilize syscall user dispatch correctly. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmRGgIETHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYockhEACWVd/KOBlQIdUMpM3jfSWsm+VZrITg sKN2WCKaz8MS5RA7xTAfZIEqMzkI0V+GPoj+8eK70W39XFU/PlSQo8LUFahSxVHF RVyz4zFKeR2XZpDa8J3ytoOvngiAnpOUflssvfA0+f3gq/B48jgLmj8XsrkmkL2T 6txRpusYNlzVTBoza0+1uEmxBTNhRxvURXa6OR/l24Kbh2udyNd6dlAoRHBV0iOW qn7ILgoYIr/74ChCbrr8yZe2rZ+BqqlS1fsjDWkuUqq9AgzeuOjGJnZtMKG6WbGg /NBj0Ewe7gsgZwBo7t4MbKNF7bXRkLczp8BX/l9xOTe+mpZ+LyNIHvOM3/TD6O1A NFJNwTAGAnhU5Uoba9HzaKYZZnanqgLxuszXznJDU3zKV5pCNMNzlKxjPT73Jzsl T1WTCyhSydluSuhOHLU4awC38pqVEQwichx98c9agIBPo7kxkb5RcTVq223wOSeI h8otkecJ6U+gmjNDHnRtNBzykEIjVFjgiSBYGTr+/6ek2Myf0O/RMr13oe9OZG5R jaKyjcDIADbYRow1rXfEs7Bq42K8rIkbVZvEEK/auYRUFngAoQ3l090i9wj6ViXf 7CqAjCC1K1BBxbqQwf0YLuDXCzUaXxcWfvNGEGEGs/NYDuu291QntGSFSxsJgsym HXvO4NzHOHi13A== =AS+6 -----END PGP SIGNATURE----- Merge tag 'core-entry-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core entry/ptrace update from Thomas Gleixner: "Provide a ptrace set/get interface for syscall user dispatch. The main purpose is to enable checkpoint/restore (CRIU) to handle processes which utilize syscall user dispatch correctly" * tag 'core-entry-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftest, ptrace: Add selftest for syscall user dispatch config api ptrace: Provide set/get interface for syscall user dispatch syscall_user_dispatch: Untag selector address before access_ok() syscall_user_dispatch: Split up set_syscall_user_dispatch() |
||
|
Andrii Nakryiko
|
be7dbd275d |
selftests/bpf: avoid mark_all_scalars_precise() trigger in one of iter tests
iter_pass_iter_ptr_to_subprog subtest is relying on actual array size
being passed as subprog parameter. This combined with recent fixes to
precision tracking in conditional jumps ([0]) is now causing verifier to
backtrack all the way to the point where sum() and fill() subprogs are
called, at which point precision backtrack bails out and forces all the
states to have precise SCALAR registers. This in turn causes each
possible value of i within fill() and sum() subprogs to cause
a different non-equivalent state, preventing iterator code to converge.
For now, change the test to assume fixed size of passed in array. Once
BPF verifier supports precision tracking across subprogram calls, these
changes will be reverted as unnecessary.
[0]
|
||
Dave Marchevsky
|
7deca5eae8 |
bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed
As reported by Kumar in [0], the shared ownership implementation for BPF programs has some race conditions which need to be addressed before it can safely be used. This patch does so in a minimal way instead of ripping out shared ownership entirely, as proper fixes for the issues raised will follow ASAP, at which point this patch's commit can be reverted to re-enable shared ownership. The patch removes the ability to call bpf_refcount_acquire_impl from BPF programs. Programs can only bump refcount and obtain a new owning reference using this kfunc, so removing the ability to call it effectively disables shared ownership. Instead of changing success / failure expectations for bpf_refcount-related selftests, this patch just disables them from running for now. [0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2/ Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230424204321.2680232-1-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
a632b76b42 |
v6.4/kernel.clone3.tests
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEuiAAKCRCRxhvAZXjc otFNAP4iesF3tqrzb1JLf/vKg8PT98re0Iec5tGYyfDSCjfGYAEAraeFOSry16sy VUn6JBjDwrkAbUeraz6zauS+rXwstQk= =xYmX -----END PGP SIGNATURE----- Merge tag 'v6.4/kernel.clone3.tests' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull clone3 selftest fix from Christian Brauner: "This is a single fix to the clone3() selftstests. It fell through the sefltest tree cracks a few times so I'll provide it here. It has low urgency but we should still correctly report the number of tests" * tag 'v6.4/kernel.clone3.tests' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests/clone3: fix number of tests in ksft_set_plan |
||
|
Linus Torvalds
|
1be89faab3 |
linux-kselftest-kunit-6.4-rc1
This KUnit update Linux 6.4-rc1 consists of: - several fixes to kunit tool - new klist structure test - support for m68k under QEMU - support for overriding the QEMU serial port - support for SH under QEMU -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmRFYFsACgkQCwJExA0N Qxw+PxAA1KHnHool3QbzZouFgLgTS2N/hxsOIoWKeUl6guUPX0XYu67FEIyt7p5k a1eFLjt+q4URW/heHKYdffP+Up6xhN5yVP8xJEcbn6GD13lz1clI9RAjObiPOehc KOV90PeAEfzosEGRIp97g4Gzu8NUMZqN7BsKBdzYJ4rEftlcjaILBVp4OfSuCyAi UbYBdRjK4eIOwGXuHVfhNqzH1HRSbzcoSRTywj5qW0Qhpe6KnZBRuZESXYBsxzGb G0nd4+OttjZyplI/xQYwaU0XGAI6roG5G4nAT5YGHLp5g8rTaHetTi+i3iK4iEru wEL0NgywkA0ujAge97RldOjtU97vvSFk7FwxdS9lxaMW/Ut2sN72I2ThI8dBvVRZ fcw8t8mmT1gUv3SCq+s1X13vz22IedXLOfvOY2o/fLk2zxOw5e8FirAz/aFeOf3K ++hK+IQvDmeMMv08bz0ORzdRQcjdwQNQ3klnfdrUVFN9yK+iAllOJ/nrXHLNIXu4 c3ITlAMldcAf2W+LRWzvqqKyT4H8MCXL3L0bBc1M1reRu9nM89AZedO8MHCB0R9Q 2ic0rOxIwZzPJuk0qPDxEVmN7Rpyx85I96YOwRemJTEfdkB/ZX+BfOU0KzinOVHC 3qrHuIw/SyRTlUEDAr53gJ5WHbdjhKAmrd1/FuplyoOSX0w6VVA= =COQn -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - several fixes to kunit tool - new klist structure test - support for m68k under QEMU - support for overriding the QEMU serial port - support for SH under QEMU * tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: add tests for using current KUnit test field kunit: tool: Add support for SH under QEMU kunit: tool: Add support for overriding the QEMU serial port .gitignore: Unignore .kunitconfig list: test: Test the klist structure kunit: increase KUNIT_LOG_SIZE to 2048 bytes kunit: Use gfp in kunit_alloc_resource() kernel-doc kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py kunit: tool: remove unused imports and variables kunit: tool: add subscripts for type annotations where appropriate kunit: fix bug of extra newline characters in debugfs logs kunit: fix bug in the order of lines in debugfs logs kunit: fix bug in debugfs logs of parameterized tests kunit: tool: Add support for m68k under QEMU |
||
|
Linus Torvalds
|
0f50767d7e |
linux-kselftest-next-6.4-rc1
linux-kselftest-next-6.4-rc1 This Kselftest update for Linux 6.4-rc1 consists of: - several patches to enhance and fix resctrl test - nolibc support for kselftest with an addition to vprintf() to tools/nolibc/stdio and related test changes - Refactor 'peeksiginfo' ptrace test part - add 'malloc' failures checks in cgroup test_memcontrol - a new prctl test - enhancements sched test with additional ore schedule prctl calls -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmRFWfMACgkQCwJExA0N QxxXPg/9Fjo+jLEt6/CraOQeeyQsmzQkPiXutqrjUoUwaMGpOoon+En39g1eDAiZ 5iJE8lu47ldUJNp7Pn2THfcLXJ4Le+12s0imWuXaDf6VdFUNsyd9AZMfziMmeUGa 6GXLF+FUzT7uXbIuIrPvZmyX3QFL8WEcywmgFRlAyfLFcg37uUgiKSl7ATrgWCEw jlPELO2p2+t+EB0/n1VMoXup6tGD6tpuuNH50rDeRMTV+cW7wKTvJyFXbMvGThcx YfjzofYm+drX5gka/XQYynZehTNcbASjkvYYEqm3piwWCyfqt4Y1aOAA8fS9h+86 jKGF/pxz1Zcl7vgZW5WixKaJ+cMf8gfCMRsny6h2x2pmqKwqSJtg+jk8XqNkJQnh JKwRxosLjEQMyIRPMH9PUjBQD46VuC2nvu4SY5apxkbHH2iG8SKG/DNIpSFXB2m0 7BuziwKZe9uw671vaZU2b0r5eeCxETtuFwlHWN9Rl954g0zeueyUuBqg0ibpQois Jp2SvwVR+oXRLHoqDMrCEDk0WEGJ9WD/mMxW4iHGMYRwoXb1RCKzFWEoYw3dFAxw N/knx2IeEFshiKIAqaGnpER1chLe6ChX/5rDXkj1YLDwHEJdowHhE9/GxqGbhEUi zOzZIAGMVTOZp6g/TIutGYfpyxUAXj19eRoAbA/KkLmv4d+s1nY= =992w -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: - several patches to enhance and fix resctrl test - nolibc support for kselftest with an addition to vprintf() to tools/nolibc/stdio and related test changes - Refactor 'peeksiginfo' ptrace test part - add 'malloc' failures checks in cgroup test_memcontrol - a new prctl test - enhancements sched test with additional ore schedule prctl calls * tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits) selftests/resctrl: Fix incorrect error return on test complete selftests/resctrl: Remove duplicate codes that clear each test result file selftests/resctrl: Commonize the signal handler register/unregister for all tests selftests/resctrl: Cleanup properly when an error occurs in CAT test selftests/resctrl: Flush stdout file buffer before executing fork() selftests/resctrl: Return MBA check result and make it to output message selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test selftests/resctrl: Use correct exit code when tests fail kselftest/arm64: Convert za-fork to use kselftest.h kselftest: Support nolibc tools/nolibc/stdio: Implement vprintf() selftests/resctrl: Correct get_llc_perf() param in function comment selftests/resctrl: Use remount_resctrlfs() consistently with boolean selftests/resctrl: Change name from CBM_MASK_PATH to INFO_PATH selftests/resctrl: Change initialize_llc_perf() return type to void selftests/resctrl: Replace obsolete memalign() with posix_memalign() selftests/resctrl: Check for return value after write_schemata() selftests/resctrl: Allow ->setup() to return errors selftests/resctrl: Move ->setup() call outside of test specific branches selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem ... |
||
|
Linus Torvalds
|
5dfb75e842 |
RCU Changes for 6.4:
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
|
||
|
Linus Torvalds
|
5d77652fbf |
nolibc updates for v6.4
o Add support for loongarch. o Fix stack-protector issues. o Support additional integral types and signal-related macros. o Add support for stdin, stdout, and stderr. o Add getuid() and geteuid(). o Allow S_I* macros to be overridden by program. o Defer to linux/fcntl.h and linux/stat.h to avoid duplicate definitions. o Many improvements to the self tests. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmQsjLUTHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jKuOD/9Y18ncS7+K7D9m89h5zwqBoPeNdP65 fC/kSgBeLreqO9hR7fsDegPk/pC8ZcMZj7iiLMV8dQIan0N74Hcd4mnL+Nf9LdkP KpwMfN/DG7h+p69Ug4d6qQqSr7jwEGa1NE280NguNtugs+kanSayVoSh0lhWPp7K 5t9s4oITOQNa69EgluB25b1qbaY36DibsBbt7vO2b/Rsmbw13UdgXQxKBQTgEOmQ yfNqjSYatRrl7pQQiQQDwV8xzd84jNLgNKsTDtG18kUWqYBhleMDQxt54betRFZ2 O3SNylt7pJKVFsgjAB90TcOl4SRmzXJ0+jNLIuNYJkqlQaPjQy29N4nBBUp2ciBf sSkL4OBfaegJlnBWZ4LwyV+ZTPLGQ5PZ78EhfqMpQzVbEibL5Es/pPAVuUxLVK4B U03+sh4IAr2aK4aXcxXgDWYr/HmKP6DWrlp/oH679sW1e2mUpnjghOfuGMYwLifo d+a/M2VH8++KOV/0aZf/Z4p1Jbexn6/jz4pW7DTfiARduUtlaN5F69oAr85q5vrS T1dZ84ZjmxrWJUYEJjfs5DM+fvPzsOyho8ae9TRlxnJJtW6UOZ0TTUo+mUDfgqWQ OU6XteK6zTQmE5H9aVOVwO/jl0uXWzmHAoJTAynpPgEkP01I+t6Vx8e1PAK/oPbT fJdUIEFiMo1qMg== =BS2x -----END PGP SIGNATURE----- Merge tag 'nolibc.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc updates from Paul McKenney: - Add support for loongarch - Fix stack-protector issues - Support additional integral types and signal-related macros - Add support for stdin, stdout, and stderr - Add getuid() and geteuid() - Allow S_I* macros to be overridden by program - Defer to linux/fcntl.h and linux/stat.h to avoid duplicate definitions - Many improvements to the selftests * tag 'nolibc.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (22 commits) tools/nolibc: x86_64: add stackprotector support tools/nolibc: i386: add stackprotector support tools/nolibc: tests: add test for -fstack-protector tools/nolibc: tests: fold in no-stack-protector cflags tools/nolibc: add support for stack protector tools/nolibc: tests: constify test_names tools/nolibc: add helpers for wait() signal exits tools/nolibc: add definitions for standard fds selftests/nolibc: Adjust indentation for Makefile selftests/nolibc: Add support for LoongArch tools/nolibc: Add support for LoongArch tools/nolibc: Add statx() and make stat() rely on statx() if necessary tools/nolibc: Include linux/fcntl.h and remove duplicate code tools/nolibc: check for S_I* macros before defining them selftests/nolibc: skip the chroot_root and link_dir tests when not privileged tools/nolibc: add getuid() and geteuid() tools/nolibc: add tests for the integer limits in stdint.h tools/nolibc: enlarge column width of tests tools/nolibc: add integer types and integer limit macros tools/nolibc: add stdint.h ... |
||
|
Linus Torvalds
|
4a4075ada6 |
locktorture updates for v6.4
This update adds tests for nested locking and also adds support for testing raw spinlocks in PREEMPT_RT kernels. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmQs8kETHHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jImaEACFX7CPZyRUG32Yo6wdzxRHuZPid6cR Si5GyRiTJzKuS9aDgl6jMYRvFXSXE9Xx1TVX0ad6fkNW40IMAkXprmUkQwN3ZtSb K/pOLyOSFkm/XDrfDinPU46kh+DgSrAZtB3jhELa5doRxr9lWWSnwV4HoBx64T3/ 84LEyIi47OSVxucaUWfimDUyBbNl4Oq95hdpD3hwxyxq5nsv2Q+oLWy2syXeegOz 3ru4Aswg40cwjYT9tjnrfZKZeteby2q55JYUDvP3kPfu/utyMyafUOda0DhHFdRB dT1EISkY/zyqf3orTfghLpYJEplDNkSKhVtyn2dQcRHhoUJ9e/8xnRclqVo4tkqv QWUZHJFar08P6iNBh9Z/YiM8D4kpeQNVCmR29h094BlQMbTLYbcZUjJ3YeE5nsz+ Bid7Ln6aBvGb3Ui6EWq7FVfcGzrPms3MUXw6nQLh6HaQg0F2g73MKS9Wd75OjEc/ cKPxkqzC35pM87eEf0xBlJzudZYxkYhP8Rt0bCGt/tq/pZAulCyOgnET2mcBv7Z0 94uEIGVvswVPB9/VKyqf7mHVrk/uJeygGKD1++4pzGumdhfsaM1dl3g6DkrSgK1j A/kAApkhha8Zacj3oAAQuBPi8JuIqUFQvfbA8Os6d/8PXfTRaaMnV9DRS7wcohkP 7haDPwX8pHj+Gg== =QAhX -----END PGP SIGNATURE----- Merge tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull locktorture updates from Paul McKenney: "This adds tests for nested locking and also adds support for testing raw spinlocks in PREEMPT_RT kernels" * tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: locktorture: Add raw_spinlock* torture tests for PREEMPT_RT kernels locktorture: With nested locks, occasionally skip main lock locktorture: Add nested locking to rtmutex torture tests locktorture: Add nested locking to mutex torture tests locktorture: Add nested_[un]lock() hooks and nlocks parameter |
||
Rafael J. Wysocki
|
c90b29cede |
Merge branch 'acpica'
Merge ACPICA material for 6.4-rc1: - Delete bogus node_array array of pointers from AEST table (Jessica Clarke). - Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang). - Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang). - Add missing tables to astable (Pedro Falcato). - Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen). - Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski). - Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary). - Update all copyrights/signons in ACPICA to 2023 (Bob Moore). - Add support for ClockInput resource (v6.5) (Niyas Sait). - Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L). - Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L). - Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein). - Make ACPICA code support flexible arrays properly (Kees Cook). - Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red). - Add os specific support for Zephyr RTOS to ACPICA (Najumon). - Update version to 20230331 (Bob Moore). * acpica: (32 commits) ACPICA: Update version to 20230331 ACPICA: add os specific support for Zephyr RTOS ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array ACPICA: acpi_madt_oem_data: Fix flexible array member definition ACPICA: acpi_dmar_andd: Replace 1-element array with flexible array ACPICA: acpi_pci_routing_table: Replace fixed-size array with flex array member ACPICA: struct acpi_resource_dma: Replace 1-element array with flexible array ACPICA: Introduce ACPI_FLEX_ARRAY ACPICA: struct acpi_nfit_interleave: Replace 1-element array with flexible array ACPICA: actbl2: Replace 1-element arrays with flexible arrays ACPICA: actbl1: Replace 1-element arrays with flexible arrays ACPICA: struct acpi_resource_vendor: Replace 1-element array with flexible array ACPICA: Avoid undefined behavior: load of misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within misaligned address ACPICA: Avoid undefined behavior: member access within null pointer ACPICA: Avoid undefined behavior: applying zero offset to null pointer ... |
||
Pedro Tammela
|
7eb060a51a |
selftests: tc-testing: add more tests for sch_qfq
The QFQ qdisc class has parameter bounds that are not being checked for correctness. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Eduard Zingerman
|
35150203e3 |
selftests/bpf: verifier/prevent_map_lookup converted to inline assembly
Test verifier/prevent_map_lookup automatically converted to use inline assembly. This was a part of a series [1] but could not be applied becuase another patch from a series had to be witheld. [1] https://lore.kernel.org/bpf/20230421174234.2391278-1-eddyz87@gmail.com/ Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421204514.2450907-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
Jakub Kicinski
|
9a82cdc28f |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZELn8wAKCRDbK58LschI g1khAQC1nmXPuKjM4EAfFK8Ysb3KoF8ADmpE97n+/HEDydCagwD/bX0+NABR75Nh ueGcoU1TcfcbshDzrH0s+C95owZDZw4= =BeZM -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-04-21 We've added 71 non-merge commits during the last 8 day(s) which contain a total of 116 files changed, 13397 insertions(+), 8896 deletions(-). The main changes are: 1) Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward, from Florian Westphal. 2) Fix race between btf_put and btf_idr walk which caused a deadlock, from Alexei Starovoitov. 3) Second big batch to migrate test_verifier unit tests into test_progs for ease of readability and debugging, from Eduard Zingerman. 4) Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree, from Dave Marchevsky. 5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF selftests into libbpf-provided bpf_helpers.h header and improve kfunc handling, from Andrii Nakryiko. 6) Support 64-bit pointers to kfuncs needed for archs like s390x, from Ilya Leoshkevich. 7) Support BPF progs under getsockopt with a NULL optval, from Stanislav Fomichev. 8) Improve verifier u32 scalar equality checking in order to enable LLVM transformations which earlier had to be disabled specifically for BPF backend, from Yonghong Song. 9) Extend bpftool's struct_ops object loading to support links, from Kui-Feng Lee. 10) Add xsk selftest follow-up fixes for hugepage allocated umem, from Magnus Karlsson. 11) Support BPF redirects from tc BPF to ifb devices, from Daniel Borkmann. 12) Add BPF support for integer type when accessing variable length arrays, from Feng Zhou. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits) selftests/bpf: verifier/value_ptr_arith converted to inline assembly selftests/bpf: verifier/value_illegal_alu converted to inline assembly selftests/bpf: verifier/unpriv converted to inline assembly selftests/bpf: verifier/subreg converted to inline assembly selftests/bpf: verifier/spin_lock converted to inline assembly selftests/bpf: verifier/sock converted to inline assembly selftests/bpf: verifier/search_pruning converted to inline assembly selftests/bpf: verifier/runtime_jit converted to inline assembly selftests/bpf: verifier/regalloc converted to inline assembly selftests/bpf: verifier/ref_tracking converted to inline assembly selftests/bpf: verifier/map_ptr_mixing converted to inline assembly selftests/bpf: verifier/map_in_map converted to inline assembly selftests/bpf: verifier/lwt converted to inline assembly selftests/bpf: verifier/loops1 converted to inline assembly selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly selftests/bpf: verifier/direct_packet_access converted to inline assembly selftests/bpf: verifier/d_path converted to inline assembly selftests/bpf: verifier/ctx converted to inline assembly selftests/bpf: verifier/btf_ctx_access converted to inline assembly selftests/bpf: verifier/bpf_get_stack converted to inline assembly ... ==================== Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Davide Caratti
|
7041101ff6 |
net/sched: sch_fq: fix integer overflow of "credit"
if sch_fq is configured with "initial quantum" having values greater than
INT_MAX, the first assignment of "credit" does signed integer overflow to
a very negative value.
In this situation, the syzkaller script provided by Cristoph triggers the
CPU soft-lockup warning even with few sockets. It's not an infinite loop,
but "credit" wasn't probably meant to be minus 2Gb for each new flow.
Capping "initial quantum" to INT_MAX proved to fix the issue.
v2: validation of "initial quantum" is done in fq_policy, instead of open
coding in fq_change() _ suggested by Jakub Kicinski
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/377
Fixes:
|
||
|
Eduard Zingerman
|
4db10a8243 |
selftests/bpf: verifier/value_ptr_arith converted to inline assembly
Test verifier/value_ptr_arith automatically converted to use inline assembly. Test cases "sanitation: alu with different scalars 2" and "sanitation: alu with different scalars 3" are updated to avoid -ENOENT as return value, as __retval() annotation only supports numeric literals. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-25-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
efe25a330b |
selftests/bpf: verifier/value_illegal_alu converted to inline assembly
Test verifier/value_illegal_alu automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-24-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
82887c2568 |
selftests/bpf: verifier/unpriv converted to inline assembly
Test verifier/unpriv semi-automatically converted to use inline assembly. The verifier/unpriv.c had to be split in two parts: - the bulk of the tests is in the progs/verifier_unpriv.c; - the single test that needs `struct bpf_perf_event_data` definition is in the progs/verifier_unpriv_perf.c. The tests above can't be in a single file because: - first requires inclusion of the filter.h header (to get access to BPF_ST_MEM macro, inline assembler does not support this isntruction); - the second requires vmlinux.h, which contains definitions conflicting with filter.h. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-23-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
81d1d6dd40 |
selftests/bpf: verifier/subreg converted to inline assembly
Test verifier/subreg automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-22-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
f323a81806 |
selftests/bpf: verifier/spin_lock converted to inline assembly
Test verifier/spin_lock automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-21-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
426fc0e3fc |
selftests/bpf: verifier/sock converted to inline assembly
Test verifier/sock automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-20-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
034d9ad25d |
selftests/bpf: verifier/search_pruning converted to inline assembly
Test verifier/search_pruning automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-19-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
65222842ca |
selftests/bpf: verifier/runtime_jit converted to inline assembly
Test verifier/runtime_jit automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-18-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
16a42573c2 |
selftests/bpf: verifier/regalloc converted to inline assembly
Test verifier/regalloc automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-17-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
8be6327959 |
selftests/bpf: verifier/ref_tracking converted to inline assembly
Test verifier/ref_tracking automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-16-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
aee1779f0d |
selftests/bpf: verifier/map_ptr_mixing converted to inline assembly
Test verifier/map_ptr_mixing automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-13-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
4a400ef9ba |
selftests/bpf: verifier/map_in_map converted to inline assembly
Test verifier/map_in_map automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-12-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
b427ca576f |
selftests/bpf: verifier/lwt converted to inline assembly
Test verifier/lwt automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-11-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
a6fc14dc5e |
selftests/bpf: verifier/loops1 converted to inline assembly
Test verifier/loops1 automatically converted to use inline assembly. There are a few modifications for the converted tests. "tracepoint" programs do not support test execution, change program type to "xdp" (which supports test execution) for the following tests that have __retval tags: - bounded loop, count to 4 - bonded loop containing forward jump Also, remove the __retval tag for test: - bounded loop, count from positive unknown to 4 As it's return value is a random number. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-10-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
a5828e3154 |
selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly
Test verifier/jeq_infer_not_null automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-9-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
0a372c9c08 |
selftests/bpf: verifier/direct_packet_access converted to inline assembly
Test verifier/direct_packet_access automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-8-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
6080280243 |
selftests/bpf: verifier/d_path converted to inline assembly
Test verifier/d_path automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-7-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Eduard Zingerman
|
fcd36964f2 |
selftests/bpf: verifier/ctx converted to inline assembly
Test verifier/ctx automatically converted to use inline assembly. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230421174234.2391278-6-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |