Now that Nouveau supports GA100 properly, it should no longer require
the NvEnableUnsupportedChipsets parameter in order to enable it.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-11-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Nouveau supports Turing and Ampere GPUs with or without GSP-RM.
Support without GSP-RM is mostly academic, since GSP-RM is
needed to run the GPU at full clocks. It is also the default
mode for these GPUs.
GA100 is a special case, however. The current code has some support
for running GA100 without GSP-RM, but several features are missing.
More importantly, some required firmware images like ucode_ahesasc.bin
are not available and would need to be provided by Nvidia.
To prevent Nouveau from even trying to boot on GA100 without GSP-RM,
remove the non-GSP fallback option in the ga100_gsps[] array.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-10-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The GPU's ROM may begin with an Init-from-ROM (IFR) header that precedes
the PCI Expansion ROM images (VBIOS). When present, the PROM shadow
method must parse this header to determine the offset where the PCI ROM
images actually begin, and adjust all subsequent reads accordingly.
On most GPUs this is not needed because either the PRAMIN shadow method
(which reads from VRAM via the display engine) succeeds first, or the IFR
microcode has already applied the ROM offset so that PROM reads
transparently skip the header. However, on GA100 neither of these
applies: GA100 has no display engine (so PRAMIN is unavailable), and the
IFR offset is not applied to PROM reads on this GPU.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-9-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The NV_FUSE_STATUS_OPT_DISPLAY register is used to determine whether
the GPU has display hardware. The current code that normally reads
this register is instead hard-coded to check for GA100 vs later GPUs.
Since this function is called only on pre-Hopper GPUs, and this
if-statement applies only to GA100 and later, the check works
because GA100 is the only non-display Ampere and Ada GPU.
However, there actually is a register that can be read, so we should
use it.
Fixes: a34632482f ("drm/nouveau/bios/ga10[024]: initial support")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260430223838.2530778-8-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When booting with GSP-RM, the FRTS data region normally needs to be
allocated. However, on GA100, this region is not used and so its
size needs to be set to zero.
The truth is that GA100 is just special, and the simplest way to
determine the proper FRTS data region size is to check for this
GPU specifically.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-7-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
On some Nvidia GPUs (i.e. GA100), the FRTS region is not allocated
(its size is set to 0). In such cases, FWSEC-FRTS should not be run.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-6-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
On GA100, the row remapper hardware reserves a small amount of DRAM at
the end of framebuffer for spare rows used to repair memory errors at
runtime. When an uncorrectable ECC error is detected in a DRAM row,
the row remapper redirects accesses to a spare row, transparently
repairing the fault.
The LOCAL_MEMORY_RANGE register (0x100ce0) reports the GPU's FB address
range, but its encoding rounds to 1GB boundaries. On GA100, VBIOS
originally rounded this value down, which could lose up to ~1GB of
usable FB. As a workaround, newer VBIOS instead rounds up to the next
1GB boundary and programs MMU_LOCK (registers 0x1fa82c/0x1fa830) to
mark the gap between the actual usable FB and the rounded-up range as
reserved.
OpenRM's kgspCalculateFbLayout_TU102() handles this by reading the
MMU_LOCK registers and computing the WPR top boundary as:
vbiosReservedOffset = min(mmuLockLo, vgaWorkspaceOffset)
Without this, the WPR region is placed at the top of LOCAL_MEMORY_RANGE,
which overlaps the reserved region. The booter firmware detects this
and rejects the WPR layout.
Add ga100_gsp_mmu_lock_lo() to read the MMU_LOCK range and clamp
gsp->fb.bios.addr accordingly, mirroring OpenRM's behavior.
This is a GA100-only issue. GA102 and later add the
NV_USABLE_FB_SIZE_IN_MB register which reports the correct usable FB
size directly, eliminating the need for the MMU_LOCK workaround.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-5-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In OpenRM's kgspCalculateFbLayout_TU102(), gspFwWprEnd is derived from
vbiosReservedOffset, which is computed as:
vbiosReservedOffset = min(mmuLockLo, vgaWorkspaceOffset)
The VGA workspace offset is one input into this calculation, not the
direct source of gspFwWprEnd. vbiosReservedOffset is the effective
top boundary for WPR2 placement, and it may be lower than the VGA
workspace when VBIOS has locked a region via MMU_LOCK.
In Nouveau, gsp->fb.bios.addr is the equivalent of vbiosReservedOffset,
while gsp->fb.bios.vga_workspace.addr corresponds to the raw VGA
workspace location. The original code assigned vga_workspace.addr to
gspFwWprEnd, which produced the correct result only because bios.addr
was always set equal to vga_workspace.addr and never adjusted.
Use gsp->fb.bios.addr for gspFwWprEnd to correctly mirror OpenRM's
layout logic, so that future adjustments to bios.addr (such as clamping
it to an MMU_LOCK boundary) are properly reflected in the WPR metadata
passed to the booter.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-4-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The booter-load and booter-unload firmware run on the SEC2 falcon.
During tu102_gsp_oneinit(), the booter constructor needs device->sec2
to access the SEC2 falcon.
Without the .sec2 entry, device->sec2 is NULL and this dereference
crashes during GSP-RM boot.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-3-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
buf_printf() uses a fixed-size stack buffer. vsnprintf() returns the
number of bytes that *would* have been written to that buffer, which can
be larger than the size of said buffer if the formatted string is too
long.
The problem is that whenever this happens buf_printf() currently passes
this length, unchecked, to buf_write(), which silently reads past the
stack buffer and copies invalid data into the output buffer.
Fix this by detecting vsnprintf() failures and truncations before
appending to the output buffer, and report a fatal error instead of
producing corrupt symbol names.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260527-nova-exports-v2-1-06de4c556d55@nvidia.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Add support for the %{?dist} macro in the kernel.spec file. This enables
building and releasing kernel RPMs with a custom distribution suffix
(e.g., via rpmbuild's --define option) to better match production
environment tracking.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://patch.msgid.link/20260526062732.84006-1-laoar.shao@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Clean up the remaining IS_ERR_OR_NULL() checks in ctrl.c and rpc.c.
The underlying functions return error pointers, so IS_ERR() is
sufficient.
This affects:
- r535_gsp_rpc_ctrl() in ctrl.c
- r535_gsp_rpc_ctor() in rpc.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-6-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
Replace WARN_ON(IS_ERR_OR_NULL()) with WARN_ON(IS_ERR()) in various
GSP-RM files. The underlying functions return error pointers, so
checking for NULL is redundant.
This affects:
- r535_bar_bar2_update_pde() in bar.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-5-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
Clean up IS_ERR_OR_NULL() checks in the core RPC and alloc
implementation files. The underlying functions return error pointers,
so IS_ERR() is sufficient.
This affects:
- r535_gsp_rpc_rm_free() in alloc.c
- r535_gsp_rpc_rm_alloc_push() in alloc.c
- r535_gsp_msgq_recv() in rpc.c
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-4-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
The underlying nvkm_gsp_rpc_get() function returns error pointers,
so checking for NULL with IS_ERR_OR_NULL() is redundant. Use IS_ERR()
instead.
This affects nvkm_gsp_rpc_rd().
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-3-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
The underlying functions already return error pointers, so checking for
NULL with IS_ERR_OR_NULL() is redundant. Use IS_ERR() instead.
This affects:
- nvkm_gsp_rm_alloc_get()
- nvkm_gsp_rm_alloc()
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-2-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
Commit 8312cab5ff ("timers/migration: Rename 'online' bit to
'available'") renamed the 'online' field of struct tmigr_cpu to
'available'. The kernel doc comment above the struct still describes the
old field name.
Update it to reflect the actual field name and use the 'available' wording
in the description.
Fixes: 8312cab5ff ("timers/migration: Rename 'online' bit to 'available'")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260526022106.1302279-1-zhanxusheng@xiaomi.com
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing.
Cc: stable@vger.kernel.org
Fixes: 5ae6e89f74 ("HID: wacom: implement the finger part of the HID generic handling")
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
cgroup.max.descendants and cgroup.max.depth are shown through seq_file.
Their show callbacks read cgrp->max_descendants and cgrp->max_depth with
READ_ONCE(), respectively.
The corresponding write callbacks update the same scalar fields while
holding the cgroup lock, but the seq_file show path does not serialize
against those stores. This leaves the lockless show-side loads annotated
with READ_ONCE(), while the corresponding stores remain plain stores.
Use WRITE_ONCE() for the updates so the intended lockless access is marked
consistently on both sides. This does not change locking, ordering, or
user-visible semantics.
Assisted-by: OpenAI-Codex:gpt-5.5
Signed-off-by: Ren Tamura <ren.tamura.oss@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Arch bitrev API is covered in MAINTAINERS under the BITOPS entry,
while generic bitrev is unmaintained. Move it under BITOPS too.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
The RISC-V Bit-manipulation Extension for Cryptography (Zbkb) provides
the 'brev8' instruction, which reverses the bits within each byte.
Combined with the 'rev8' instruction (from Zbb or Zbkb), which reverses
the byte order of a register, we can efficiently implement 16-bit,
32-bit, and (on RV64) 64-bit bit reversal.
This is significantly faster than the default software table-lookup
implementation in lib/bitrev.c, as it replaces memory accesses and
multiple arithmetic operations with just two or three hardware
instructions.
Select HAVE_ARCH_BITREVERSE as well as GENERIC_BITREVERSE,
and provide <asm/bitrev.h> to utilize these instructions when
the Zbkb extension is available at runtime via the alternatives
mechanism.
[Yury: select the options conditionally on BITREVERSE]
Link: https://docs.riscv.org/reference/isa/unpriv/b-st-ext.html
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Define generic___bitrev8/16/32 using the implementation in
<linux/bitrev.h>, so they can be reused in <asm/bitrev.h>,
such as RISCV.
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
The generic bit reversal implementation is controlled by
!HAVE_ARCH_BITREVERSE. This makes it difficult for architectures to
provide a hardware-accelerated implementation while being able to
fall back to the generic version if needed.
This patch adds GENERIC_BITREVERSE, so bitreverse API is controlled by
BITREVERSE, GENERIC_BITREVERSE and HAVE_ARCH_BITREVERSE options. The
relationship between them is described as follows:
- BITREVERSE is selected by user code; it's required to generate the API;
- Architectures may select HAVE_ARCH_BITREVERSE and provide an arch
implementation in arch/$(ARCH)/include/asm/bitrev.h.
- if HAVE_ARCH_BITREVERSE isn't set, BITREVERSE selects GENERIC_BITREVERSE;
- if GENERIC_BITREVERSE is set and HAVE_ARCH_BITREVERSE is not, the kernel
provides generic implementation only, and wires bitrevXX() to it.
- if HAVE_ARCH_BITREVERSE is set and GENERIC_BITREVERSE is not, the arch
code provides __arch_bitrevXX(), and it is wired to bitrevXX();
- if both GENERIC_BITREVERSE and HAVE_ARCH_BITREVERSE are selected, the kernel
generates generic___bitrev(), but wires bitrev() to the __arch_bitrev().
The last option allows architectures to use generic___bitrev() as a
fallback option.
Drivers and core code should never select GENERIC_BITREVERSE or
HAVE_ARCH_BITREVERSE explicitly.
Architectures that require generic bitreverse API as a fallback should
explicitly enable GENERIC_BITREVERSE together with HAVE_ARCH_BITREVERSE.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Architectures may have bit reversal instructions, but if the API not
needed, the corresponding option should not be selected because it may
lead to generating the unneeded code.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
find_nth_and_bit() and find_nth_and_andnot_bit() may return a value
greater than @size when the requested bit does not exist, matching
find_nth_bit(). Document that correctly. All current users are safe
against the '>=' vs '==' conditions.
Also fix the for_each_clear_bitrange_from() parameter descriptions so
they describe clear ranges instead of set ranges.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
In preparation for removing bitmap_print_to_pagebuf(), switch
cpumap_print_to_pagebuf() to using scnprintf("%*pbl").
Signed-off-by: Yury Norov <ynorov@nvidia.com>
A user can enable io accounting for passthrough requests, so export the
helper that checks if the request should be tracked. This will enable
stacking drivers to to report iostats for passthrough workloads. Since
the stacking request_queue may not be the one providing the request, the
API has to add a parameter for the caller to specify which one to check.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260528010041.1533124-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Update tegra_bo_iommu_map() to correctly check for errors from
iommu_map_sgtable.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-2-fb484c07d2a1@nvidia.com
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-1-fb484c07d2a1@nvidia.com
The drivers/gpu/host1x/context_bus.c does not include any declaration of
host1x_context_device_bus_type, and after including "context.h" it also
showed that there are two definitions in the kernel because the extern
declaration was missing the const qualifier.
Include linux/host1x_context_bus.h and drop the wrong declaration from
context.h. While at it, also predeclare struct host1x_memory_context.
Fixes the following sparse warning:
drivers/gpu/host1x/context_bus.c:9:23: warning: symbol 'host1x_context_device_bus_type' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[treding@nvidia.com: minor fixups, reword commit message to reflect changes]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260123140512.609167-1-ben.dooks@codethink.co.uk
The of_for_each_phandle() macro increments the reference count of the
device node it iterates over. If the loop exits early, the reference must
be released manually.
In tegra_dc_has_output(), the function returns true immediately when a
match is found, failing to release the current node's reference.
Fix this by adding a call to of_node_put() before returning from the loop.
Fixes: c57997bce4 ("drm/tegra: sor: Add Tegra186 support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260128-dc-v1-1-a88205826301@gmail.com
Without the cmu, nvdisplay will display colors that are notably darker
than intended. The vendor bootloader and the downstream display driver
enable the cmu and sets a sRGB table. Loading that table here results in
the intended colors.
Co-developed-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com> # Jetson AGX Xavier
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260407-tegra-drm-cmu-v4-1-2fe95f305afd@gmail.com
After device_initialize(), the embedded struct device in struct
host1x_device should be released through the device core with
put_device().
In host1x_device_add(), if host1x_device_parse_dt() fails, the current
error path frees the object directly with kfree(device). That bypasses
the normal device lifetime handling and leaks the reference held on the
embedded struct device.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_device() in the host1x_device_parse_dt() failure
path.
Fixes: f4c5cf88fb ("gpu: host1x: Provide a proper struct bus_type")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260413141526.2961841-1-lgs201920130244@gmail.com
In tegra_mipi_request(), when provider.np is not equal with args.np, it
returns without calling of_node_put(args.np), causing a reference leak.
Convert to use the existing goto out pattern to ensure proper cleanup.
Fixes: 767598d447 ("gpu: host1x: mipi: Update tegra_mipi_request() to be node based")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260416-mipi-v1-1-9c027175abdf@gmail.com
Fbdev framebuffer allocation now goes through the regular ioctl call
chain. This makes tegra_fb_alloc() an internal helper function. Declare
it as static.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-6-tzimmermann@suse.de
Replace the internal DRM framebuffer with a DRM client buffer. The
client buffer allocates the DRM framebuffer on a file and also uses
GEM object handles via the regular ADDFB2 interfaces.
Using client-buffer interfaces unifies framebuffer allocation for
DRM clients in user space and tegra's internal fbdev emulation. It
also simplifies the clean-up side of the fbdev emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-5-tzimmermann@suse.de
Replace the geometry and size calculation in tegra's fbdev emulation
with DRM format helpers. This consists of a 4CC lookup from the fbdev
parameters, format lookup, pitch calculation and size calculation.
Then allocate the GEM buffer object for the framebuffer memory from
the calculated size.
Set up mode_cmd with the calculated values just before allocating the
framebuffer. This code will later be replaced with a DRM client buffer.
Set framebuffer size fields in struct fb_info from the size stored in
the GEM buffer object instead of what has been requested. The requested
size is an estimate, while the buffer size is the exact value rounded
to the correct alignment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-4-tzimmermann@suse.de
The screen_buffer field in struct fb_info contains the kernel address
of the first byte of framebuffer memory. Do not add the display offset.
This offset only describes scrolling during scanout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: de2ba664c3 ("gpu: host1x: drm: Add memory manager and fb")
Cc: dri-devel@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-3-tzimmermann@suse.de
Add 2 struct member descriptions and convert #define macro constants
comments to kernel-doc comments to eliminate all kernel-doc warnings:
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'cmdbuf' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'target' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:780 This comment starts with '/**',
but isn't a kernel-doc comment.
* Specify that bit 39 of the patched-in address should be set to switch
Warning: include/uapi/drm/tegra_drm.h:832 This comment starts with '/**',
but isn't a kernel-doc comment.
* Execute `words` words of Host1x opcodes specified in the
`gather_data_ptr`
Warning: include/uapi/drm/tegra_drm.h:837 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Warning: include/uapi/drm/tegra_drm.h:842 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260427184454.693794-1-rdunlap@infradead.org
Use correct kernel-doc format and add missing nested struct entries to
eliminate kernel-doc warnings:
Warning: drivers/gpu/drm/tegra/dp.h:28 Incorrect use of kernel-doc format:
* tps3_supported:
Warning: drivers/gpu/drm/tegra/dp.h:54 struct member 'tps3_supported'
not described in 'drm_dp_link_caps'
dp.h:73: warning: Function parameter or struct member 'apply_training'
not described in 'drm_dp_link_ops'
dp.h:73: warning: Function parameter or struct member 'configure'
not described in 'drm_dp_link_ops'
dp.h:160: warning: Excess struct member 'cr' description in 'drm_dp_link'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260427184442.693768-1-rdunlap@infradead.org
In host1x_device_init(), the error teardown paths do not check
client->ops before dereferencing it, unlike the forward init paths
which correctly guard with 'client->ops &&'. This can result in a
NULL pointer dereference if client->ops is NULL.
Fix by adding the missing client->ops check in both the teardown
and teardown_late labels.
Signed-off-by: shayderrr <darknessshayder@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517170456.84927-1-darknessshayder@gmail.com
Remove the deprecated trivial helper drm_simple_encoder_init(). Inline
the call to drm_encoder_init and add instance of
drm_encoder_funcs.
Signed-off-by: Jacob McLemore <jmclemore.lkml@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260523012824.81043-1-jmclemore.lkml@gmail.com
The helper drm_simple_encoder_init() is a trivial wrapper around
drm_encoder_init() that only provides a static drm_encoder_funcs with
.destroy set to drm_encoder_cleanup(). Open-code the initialization
with a driver-specific instance of drm_encoder_funcs and remove the
dependency on drm_simple_kms_helper.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Souradipto Das <souradiptodas6@gmail.com>
[treding@nvidia.com: fix issues flagged by checkpatch]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260513100501.6468-1-souradiptodas6@gmail.com
When the fence list is empty, host1x_intr_update_hw_state()
falls through to host1x_intr_disable_syncpt_intr()
which does two MMIO writes to disable the syncpoint
interrupt and clear its status.
The ISR has already disabled and acked the interrupt
before calling host1x_intr_handle_interrupt(), making
these two writes redundant. Skip the update_hw_state()
call if no fences remain.
Measured Syncpoint wait latency (50000 samples):
Average latency: 10.6 us -> 9.4 us
99.99 pct latency: 51.90 us -> 36.58 us
Signed-off-by: Tanmay Patil <tanmayp@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260514103153.766343-3-tanmayp@nvidia.com
In host1x_syncpt_wait(), the hardware syncpoint value was loaded
initially for expiry check, and then loaded a second time to
populate the caller's value pointer. Reuse a single load for
both purposes.
After dma_fence_wait_timeout(), the previous code reloaded the syncpoint
value for the expiry check, which is only required in the timeout case.
On success (i.e., return value > 0, or return value == 0 with zero
jiffies remaining), the ISR has already cached the value before
signaling the fence. The value pointer can therefore be populated using
the cached value using host1x_syncpt_read_min() without MMIO access.
Only the timeout path requires a fresh load, move host1x_syncpt_load()
under that path.
Measured Syncpoint wait latency (50000 samples):
Average latency: 12.2 us -> 10.6 us
99.99 pct latency: 62.96 us -> 51.90 us
Signed-off-by: Tanmay Patil <tanmayp@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260514103153.766343-2-tanmayp@nvidia.com
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak reference to the bo from the
cache side. This is done by having the .pin callbacks not bump the bo's
refcount -- instead the common Host1x bo code does so, except for the
cache reference.
Also move the remove-cache-mapping-on-free code into a common function
inside Host1x code. This is only called from the TegraDRM GEM buffers
since those are the only ones that can be cached at the moment.
Reported-by: Aaron Kling <webgeek1234@gmail.com>
Fixes: 1f39b1dfa5 ("drm/tegra: Implement buffer object cache")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260515-host1x-bocache-leak-v1-1-a0375f68aeab@nvidia.com
The current power management configuration causes GR2G/GR3D to malfunction
after resume. Reconfigure all PM actions to be handled within the GR*D
probe and remove operations to address this.
Fixes: 62fa0a985e ("drm/tegra: Enable runtime PM during probe")
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517091450.46728-3-clamor95@gmail.com
