Some variables in the 'ALSA/drivers' are initialized only during the
init phase in the '__init' functions and never changed. So, mark them
as __ro_after_init to reduce the attack surface.
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://patch.msgid.link/20260524165249.48941-1-len.bao@gmx.us
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some variables in the 'ALSA/core' are initialized only during the init
phase in the '__init' functions and never changed. So, mark them as
__ro_after_init to reduce the attack surface.
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://patch.msgid.link/20260524162914.47764-1-len.bao@gmx.us
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The '*_registered' variables are initialized only during the init
phase in the '__init' functions and never changed. So, mark them as
__ro_after_init to reduce the attack surface.
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://patch.msgid.link/20260524154051.45258-1-len.bao@gmx.us
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal mic boost on the Positivo DN140 is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20260524185324.28959-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Firmware 2417 for the Scarlett 4th Gen 2i2 moved the direct monitor
gain parameter by 4 bytes, from offset 0x2a0 to 0x2a4, breaking the
"Direct Monitor X Mix Y" controls.
Special-case the offset in the get/set config helpers when the
running firmware is 2417 or later.
Fixes: 4e809a2996 ("ALSA: scarlett2: Add support for Solo, 2i2, and 4i4 Gen 4")
Cc: <stable@vger.kernel.org>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/ahIWTueUlWA5xiV+@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cs35l56_hda_read_acpi() gets an allocated ACPI _SUB string from
acpi_get_subsystem_id(). On success, that string is used to create the
firmware system name.
Several error paths after the _SUB lookup can return without releasing
the allocated string. This includes speaker ID lookup errors other than
-ENOENT, and errors after a firmware system name has been allocated.
Use scoped cleanup for the temporary _SUB string and make
cs35l56->system_name device-managed. This releases the temporary _SUB
string on every error path and lets devres release the firmware system
name on probe failure and device removal.
Fixes: 6f03b446cb ("ALSA: hda: cs35l56: Add support for speaker id")
Fixes: 40b1c2f9b2 ("ALSA: hda/cs35l56: Workaround bad dev-index on Lenovo Yoga Book 9i GenX")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260522-alsa-cs35l56-system-name-leak-v4-1-a6154dd09cd9@gmail.com
The BIOS on the Lenovo Yoga Slim 7 14AGP11 (AMD Ryzen AI / Kraken
Point chassis; board LNVNB161216, product 83QS) programs the PCI
subsystem ID of the HDA function as 17aa:0000. As a result no entry
in alc269_fixup_tbl[] matches via SND_PCI_QUIRK, the fixup falls back
to the generic auto-routing path, and the bass speaker pin is left
mis-routed. Laptop speakers sound noticeably thin.
The codec's own internal subsystem ID register reports 0x17aa394c
correctly, so an HDA_CODEC_QUIRK entry (which matches on the codec
SSID rather than on the PCI SSID) binds the chassis to the existing
ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN fixup. This mirrors the same
workaround already in place for the closely-related Yoga 7 2-in-1
14AKP10 and 16AKP10 entries earlier in the table.
With this change the kernel log goes from
ALC287: picked fixup for PCI SSID 17aa:0000
to
ALC287: picked fixup alc287-yoga9-bass-spk-pin
and speaker routing matches what the firmware intended. Verified by
the reporter against the equivalent modprobe override
(model=,alc287-yoga9-bass-spk-pin).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221438
Signed-off-by: Kris Kater <kris@kater.nu>
Link: https://patch.msgid.link/20260522060902.9423-1-kris@kater.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comment for the pin configuration 0x21 in the fixup
ALC299_FIXUP_PREDATOR_SPK states "use as headset mic, without its own
jack detect", but the fixup name and the actual usage indicate that the
pin is meant to be used as internal speaker. Correct the comment to
avoid confusion.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260522060742.1384390-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The register DSP event queue is updated under parser->lock, but
snd_motu_register_dsp_message_parser_count_event() reads pull_pos and
push_pos without the lock.
snd_motu_register_dsp_message_parser_copy_event() also reads both queue
positions before taking the lock.
Protect these accesses with parser->lock as well. This keeps the hwdep
poll/read path consistent with the producer side and with the cached
meter/parameter accessors.
Fixes: 634ec0b290 ("ALSA: firewire-motu: notify event for parameter change in register DSP model")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260521-alsa-firewire-motu-event-locking-v1-1-708e1c2b5e56@gmail.com
Commit 792d2b9a12 ("drm: drop mtrr from i915"), added this comment,
drop it since it since MTRR no longer exists since 2013 and is removed
by commit 281856477c ("drm: rip out drm_core_has_MTRR checks").
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260522104548.980226-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
When rtw_usb_write_port() fails to submit a USB Request Block (URB)
(e.g., due to device disconnect or ENOMEM), the completion callback is
never executed.
Currently, the driver ignores the return value of rtw_usb_write_port()
in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these
functions rely on the completion callback to free the socket buffers
(skbs) and the transaction control block (txcb), a submission failure
results in:
1. A memory leak of the allocated skb in rtw_usb_write_data().
2. A memory leak of the txcb structure and all aggregated skbs in
rtw_usb_tx_agg_skb().
Fix this by checking the return value of rtw_usb_write_port(). If it
fails, explicitly free the skb in rtw_usb_write_data(), and properly
purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb().
The issue was discovered in practice during device disconnect/reconnect
scenarios and memory pressure conditions. Tested by verifying normal TX
operation continues after the fix without regressions.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Cc: stable@vger.kernel.org
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260518142311.10328-2-luka.gejak@linux.dev
The driver expects the firmware to report TX status within 500ms.
However, a timeout can be triggered when the hardware performs
background scans while under TX load. During these scans, the firmware
stays off-channel for periods exceeding 500ms, delaying the delivery of
TX reports back to the driver.
When this occurs, the purge timer fires prematurely and drops the
tracking skbs from the queue. This results in the host stack
interpreting the missing status as packet loss, leading to TCP window
collapse. In testing with iperf3, this causes throughput to drop from
~90 Mbps to near-zero for approximately 2 seconds until the connection
recovers.
Increase RTW_TX_PROBE_TIMEOUT to 2500ms for RTL8723DU. This duration is
sufficient to accommodate off-channel dwell time during full background
scans, ensuring the purge timer only trips during genuine firmware
lockups and preventing unnecessary TCP retransmission cycles.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Cc: stable@vger.kernel.org
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260518142311.10328-1-luka.gejak@linux.dev
A user with MLO-capable router reports:
[ 753.080409] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 753.080417] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 813.649426] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 813.649445] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
[ 813.855983] rtw89_8922au_git 2-2:1.0: Cannot map qsel to dma v2: 26
Map RTW89_TX_QSEL_B1_MGMT and RTW89_TX_QSEL_B1_HI to RTW89_TXCH_CH10.
This is probably the right channel for these queues.
This function is also used for RTL8852AU and RTL8852CU, but those
currently aren't used in DBCC mode with rtw89 so it makes no difference
for them.
Link: https://github.com/morrownr/rtw89/issues/83#issuecomment-4314735734
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/0c8e0cf1-13e9-4c67-a67f-5f6f79fd0658@gmail.com
The existing quota set is for RTL8922DE-VS, so rename the existing tables.
Add new quota set for RTL8922DE, containing more memory to yield better
performance, so rearrange quota accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-14-pkshih@realtek.com
RTL8922D has many variants, using different quota tables. Consolidate the
quota data into a struct, and then select corresponding table for the
chip variant.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-13-pkshih@realtek.com
The previous commit aims to fix issue caused by malformed AMPDU frames.
But the drop logic fails to deal with the first AMPDU packet paired with
certain range of sequence number, and leads to unexpected packet drop.
It is more likely to encounter this failure when there are busy traffic
during rekey process and could lead to disconnection from the AP.
Fix this by adding a initial state judgement and only reset status
during pairwise rekey.
Fixes: bda294ed0e ("wifi: rtw89: Drop malformed AMPDU frames with abnormal PN")
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-10-pkshih@realtek.com
In WoWLAN mode, the firmware periodically sends Null packets to the AP
to keep the connection alive and prevent the AP from disconnecting the
client due to inactivity. However, it was observed that certain APs,
such as TP-Link Archer BE800, do not recognize Null packets as
valid activity and still drop the connection. Replacing Null packets
with ARP reply packets effectively resolves this compatibility issue
and maintains the connection.
Specifically, while the firmware typically handles standard ARP
offloads by dynamically modifying target IP/MAC fields, these
keep-alive ARP reply packets are pre-filled by the driver with the
DUT's own MAC and IP addresses for both sender and target fields.
In this case, the firmware transmits the packets as-is without
further modification. This approach ensures compatibility with APs
that require valid Layer 3 traffic for activity monitoring while
simplifying the firmware's processing logic during WoWLAN mode.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-9-pkshih@realtek.com
Originally, driver always transmits LTR (Latency Tolerance Reporting) to
pcie host, but it may cause pcie link down on some platforms because
LTR is not supported. As a result, driver will check the control
register of LTR setting to decide whether to enable LTR feature.
This applies to Wi-Fi 6 chips only. For Wi-Fi 7 chips, although the
driver still issues LTR, the hardware has its own internal logic
to determine whether to actually transmit it to pcie host.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-5-pkshih@realtek.com
When SER (system error recovery) happens, there may be some handshake
between FW and SW, e.g. SER Level 1. These handshake are based on H2C
commands and C2H events. Dump the status of them to enhance SER debug.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-4-pkshih@realtek.com
Wi-Fi 7 FW fixes support of triggering SER L0/L1 simulation via halt H2C
command on v0.35.108.0. After that, the halt H2C command trigger for
Wi-Fi 6 and Wi-Fi 7 can be the same. Update FW feature table and share the
halt H2C command trigger function between Wi-Fi 6 and Wi-Fi 7.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-3-pkshih@realtek.com
Wi-Fi 7 has dedicated HW register to count SER L0 simulation, i.e.
manually triggered by users. Show count of it in dbgfs ser_counters.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260515014433.16168-2-pkshih@realtek.com
When building the kernel using llvm-19.1.7-rust-1.85.0-x86_64, the
following symbols are generated:
$ nm vmlinux | grep ' _R'.*OPP | rustfilt
ffffffff81801560 T <kernel::opp::OPP>::freq
ffffffff81801540 T <kernel::opp::OPP as kernel::sync::aref::AlwaysRefCounted>::dec_ref
ffffffff81801520 T <kernel::opp::OPP as kernel::sync::aref::AlwaysRefCounted>::inc_ref
However, these Rust symbols are trivial wrappers around the
`dev_pm_opp_get`, `dev_pm_opp_put` and `dev_pm_opp_get_freq_indexed`
functions. It doesn't make sense to go through a trivial wrapper for
these functions.
After applying this patch, the above command will produce no output.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V
S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF
LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS
HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO
83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq
PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe
9znkJpM=
=H+I9
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc5' into driver-core-next
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Using kstrtouint_from_user() instead of copy_from_user() + kstrtouint() makes
the code simpler and less error-prone.
No functional changes.
[ bp: Align function args on opening brace, while at it. ]
Suggested-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260117145615.53455-3-fushuai.wang@linux.dev
The register address was already validated for read operations in
regmap_sunxi_rsb_reg_read before being truncated to a u8. Write operations
have the same set of possible addresses, and the address is being truncated
from u32 to u8 here as well, so the same check is needed.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260301144939.1832806-1-andrej.skvortzov@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Neil Armstrong <neil.armstrong@linaro.org> says:
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.
The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.
This regulator is used to provide vsn and vsn power to the
Ayaneo Pocket S2 dual-DSI LCD panel.
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-0-bd6b1c300ecc@linaro.org
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.
The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.
Signed-off-by: KancyJoe <kancy2333@outlook.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-2-bd6b1c300ecc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the SG Micro SGM3804 Single Inductor Dual Output Buck/Boost
Converter used to power LCD panels a provide positive and negative
power rails with configurable voltage and active discharge function
for each output.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-1-bd6b1c300ecc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On architectures with 32-bit longs, call the compat syscall
__NR_ftruncate64. As off_t is 64-bit it must be split into 2 registers.
Unlike llseek() which passes the high and low parts in explicitly named
arguments, the order here is endian independent.
Some architectures (arm, mips, ppc) require this pair of registers to
be aligned to an even register, so add custom _sys_ftruncate64()
wrappers for those.
A test case for ftruncate is added which validates negative length or
invalid fd return the appropriate error, and checks the length is
correct on success.
Co-developed-by: Jordan Richards <jordanrichards@google.com>
Signed-off-by: Jordan Richards <jordanrichards@google.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20260521-nolibc-ftruncate-v1-3-5384a83b2402@weissschuh.net
On 32-bit architectures some system calls require a single 64-bit
argument to be passed as two 32-bit halves.
Add a helper to easily split such arguments. This works on little and
bit endian.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260521-nolibc-ftruncate-v1-2-5384a83b2402@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
We are using the getrandom syscall to get a random seed for the
stack protector canary but we are calling it with no flags which means
it'll block until there is some real randomness to return.
This means that if the crng is not ready yet program startup will
block and if you are unlucky that could be for a long time and
look like the program has crashed.
Even if the call to getrandom does not yield any random data,
we will still initialize the canary.
Fixes: 7188d4637e ("tools/nolibc: add support for stack protector")
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260522090726.726985-1-daniel@thingy.jp
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The avx2 lookup routines get the next map index to process passes as a
function argument, but this isn't obvious because it's hidden in the
lookup macro.
Additionally, a recent LLM review pointed out following "bug":
-------------------------------------------------------------
> b = nft_pipapo_avx2_refill(i_ul, &map[i_ul], fill, f->mt, last);
> if (last)
> - return b;
> + ret = b;
>
> if (unlikely(ret == -1))
> ret = b / XSAVE_YMM_SIZE;
Does this change introduce a logic error when last=true and no match is
found? [..]
Should this be changed to an else-if structure instead?
-------------------------------------------------------------
LLM sees a control-flow change, but there is none:
All call sites invoke nft_pipapo_avx2_refill() only when at least one
bit in the map is set, i.e. nft_pipapo_avx2_refill() never returns -1.
Add a runtime debug check that fires if we'd return -1 as additional
documentation and also make the suggested change, code might be easier
to understand this way.
In commit 17a20e09f0 ("netfilter: nft_set: remove one argument from
lookup and update functions") I incorrectly moved the "ret" scope into
the loop.
This has no effect on the correctness, but it can (depending on map sizes)
cause a redundant repeat of an earlier processing step.
Restore the intended 'pass map index' instead of always-0. Note that I
did not see any change in performance numbers, but Stefano correctly
points out that the existing perf test likely lack a sparse intermediate
bitmap (between fields) with a lot of leading zeroes.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it contains an ASCII digit, simple_strtoul
will consume it and produce a wrong DCC IP or port in the conntrack
expectation. The extra allocation byte is also a fragile guard: if the
cap or allocation size changes, this becomes a real out-of-bounds read.
Change the loop and its post-loop check to use strict less-than,
consistent with the caller's exclusive-end convention. Update the
function comment accordingly.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When a userspace conntrack helper with multiple expectation classes is
updated via nfnetlink, every class ends up with the first class's
max_expected and timeout values.
nfnl_cthelper_update_policy_all() validates each new policy into the
corresponding slot of the temporary new_policy array, but the second
loop that commits the values into the live helper dereferences
new_policy as a pointer instead of indexing it, so every iteration
reads new_policy[0] regardless of i. An update that changes per-class
values is silently collapsed onto class 0's values with no error
returned to userspace.
Index the temporary array by i in the commit loop so each class gets
its own validated values.
Fixes: 2c42225755 ("netfilter: nfnl_cthelper: fix runtime expectation policy updates")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
net/netfilter/nft_set_rbtree.c:399 __nft_rbtree_insert()
warn: 'removed_end' is not an error pointer
Since commit : 087388278e ("netfilter: nf_tables: nft_set_rbtree: fix
spurious insertion failure") __nft_rbtree_insert() can no longer fail
and this condition is always false. Remove it.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/adjSaolTji0mPgqx@stanley.mountain/
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 02a3231b6d ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
introduced exp->net so RCU-only expectation paths no longer need to
dereference exp->master for netns lookups.
Commit 3db5647984 ("netfilter: nf_conntrack_expect: skip expectations in other netns via proc")
updated the proc path accordingly, but ctnetlink_exp_dump_table() still
compares against nf_ct_net(exp->master).
Use nf_ct_exp_net(exp) here as well so the netlink dump path matches
the rest of the March 2026 expectation netns/RCU cleanup.
Fixes: 02a3231b6d ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
Cc: stable@vger.kernel.org
Signed-off-by: Pratham Gupta <pratham36gupta@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
As-is, different netns will use same slots if the key is the same.
OVS uses this infrastructure to limit conntrack counts per zones.
Those can easily overlap. Make them hash to different slots internally.
Signed-off-by: Florian Westphal <fw@strlen.de>
Netfilter has its own netlink multiplexer, initially only a few
subsystem were using it, most notably conntrack, queue and log,
later in time nf_tables. These days it is the control plane of
preference.
Just remove modular support for this, allow it built-in only.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Similar to a few other subsystems: add a new config toggle to
enable netfilter gcov profiling in netfilter, including ebtables,
arptables and so on.
ipset and ipvs gain their own, dedicated toggles.
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
This feature is required to use 32bit arp/ip/ip6/ebtables binaries on
64bit kernels. I don't think there are many users left.
Support has been a compile-time option since 2021 and defaults to off
since 2023.
The XTABLES_COMPAT config option is already off in many distributions
including Debian and Fedora.
Give a few more months before complete removal but disable support in
user namespaces already.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
