According to the ACPI 6.6 specification, the Desired_Excursion field is not
utilized when autonomous selection is enabled. In this mode, the bit is
architecturally ignored and does not carry meaningful information.
Currently, the kernel exposes the raw Performance Limited register
value to userspace through the cpufreq sysfs interface. This may lead to
misinterpretation, as userspace may assume Desired_Excursion is valid
even when autonomous selection is active.
To provide a stable and semantically correct ABI, mask out the
Desired_Excursion bit when autonomous selection is enabled, so that
userspace does not observe undefined or misleading values.
Writes are left unchanged, as the field is architecturally ignored in
this mode and write attempts are harmless.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Include the Thermal Sensor node in the SpacemiT K1 dtsi
with definitions for registers, clocks, and interrupts.
Additionally, configure thermal zones for the soc, package, gpu, and
clusters to enable temperature monitoring via the thermal framework.
Tested-by: Vincent Legoll <legoll@online.fr> # OrangePi-RV2
Tested-by: Gong Shuai <gsh517025@gmail.com>
Signed-off-by: Shuwei Wu <shuwei.wu@mailbox.org>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260427-k1-thermal-v5-3-df39187480ed@mailbox.org
Signed-off-by: Yixun Lan <dlan@kernel.org>
Add the Peripheral DMA (PDMA) controller node for the SpacemiT K3 SoC.
The PDMA controller provides general-purpose DMA capabilities for various
peripheral devices across the system to offload CPU data transfers.
Unlike the previous K1 SoC, where some DMA masters had memory addressing
limitations (e.g. restricted to the 0-4GB space) requiring a dedicated
dma-bus with dma-ranges to restrict memory allocations, the K3 DMA masters
have full memory addressing capabilities. Therefore, the PDMA node is now
instantiated directly under the main soc bus.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260518-k3-pdma-v6-4-67fdf319a8f8@linux.spacemit.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
The memory allocated for microvolt, microamp and microwatt is not freed
in one of the paths in opp_parse_supplies() which returns directly.
Fix that by adding a goto to the error unwind ladder.
Fixes: 2eedf62e66 ("OPP: decouple dt properties in opp_parse_supplies()")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There are many loops in the form of
while (READ_ONCE(*somelocation))
cpu_relax();
Strictly speaking the architecture requires serialization instead of only a
compiler barrier in the loop so the READ_ONCE() will see an updated value.
However real hardware does not require this (see IBM z Systems Processor
Optimization Primer - FAQ [1]), but it is still recommended to add
serialization. Given that cpu_relax() is doing nothing useful, it does
not hurt to add the single and fast instruction which makes sure that
serialization happens, and such loops may be left a bit faster.
[1] https://community.ibm.com/community/user/viewdocument/microprocessor-optimization-primer
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
cpu_relax() is defined identically at two different locations.
Just like most other architectures remove the implementation at
asm/processor.h and only use the one at asm/vdso/processor.h,
avoiding code duplication.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use an alternative to implement bcr_serialize() and use alternative
patching to select between serialization and fast-serialization
depending on the corresponding facility bit.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
On arm64 the empty zero page is going to be mapped read-only [1].
Do the same for s390 with an explicit set_memory_ro() call.
[1] https://lore.kernel.org/all/20260427153416.2103979-19-ardb+git@google.com/
Suggested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Start the numbering scheme for higher-level topology structures (like
socket, book, drawer) at zero, matching the convention for other hardware
identifiers like e.g. CPU numbers.
Hardware documentation, the Hardware Management Console and other tools
like zmemtopo also use zero-based numbering for these containing entities.
Aligning the numbering in sysfs, procfs, and tools like lscpu improves
user experience by making it easier to correlate topology information
across different interfaces.
If available, Linux on s390 derives this physical topology information from
the stsi function code 15 store_topology instruction, which is defined to
start at 1 for the lowest numbered container id. Subtract one, so
drawer_id, book_id and socket_id in cpu_topology[] start with 0 for the
lowest numbered entity; and /proc/cpuinfo and tools like 'lscpu -ye'
display the expected values.
Display only, no functional change intended.
Example: In a partition with 3 cores in a system with
8 cores per socket; 2 sockets per book; 4 books per dawer; and 4 drawers:
Before this fix:
$ lscpu -ye
CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2 ONLINE CONFIGURED POLARIZATION ADDRESS
0 0 2 4 1 0 0:0:0 yes yes vert-high 0
1 0 2 4 1 0 1:1:1 yes yes vert-high 1
2 0 2 4 1 1 2:2:2 yes yes vert-medium 2
3 0 2 4 1 1 3:3:3 yes yes vert-medium 3
4 0 2 4 2 3 4:4:4 yes yes vert-low 4
5 0 2 4 2 3 5:5:5 yes yes vert-low 5
After this fix:
$ lscpu -ye
CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2 ONLINE CONFIGURED POLARIZATION ADDRESS
0 0 1 3 0 0 0:0:0 yes yes vert-high 0
1 0 1 3 0 0 1:1:1 yes yes vert-high 1
2 0 1 3 0 1 2:2:2 yes yes vert-medium 2
3 0 1 3 0 1 3:3:3 yes yes vert-medium 3
4 0 1 3 1 3 4:4:4 yes yes vert-low 4
5 0 1 3 1 3 5:5:5 yes yes vert-low 5
For KVM guests, qemu emulates the stsi FC15 store_topology instruction.
This emulation currently erroneously starts id numbering at 0. A qemu fix
is proposed that makes this emulation compliant to the stsi architecture.
In case a guest with this patch is running on a qemu without the other fix,
it can happen that ids of 255 are displayed erroneously.
z/VM currently does not provide or emulate physical topology information to
its guests. So this patch does not change anything for z/VM guests.
Fixes: 10d3858950 ("[S390] topology: expose core identifier")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
qcomtee_object_user_init() is a variadic function and when the function
return because there's no dispatch callback in QCOMTEE_OBJECT_TYPE_CB
case, there's no va_end to cleanup "ap" object initialized by va_start
and that can cause undefined behavior. So make sure to use va_end before
returning the error code when there's no dispatch callback.
This is reported by Coverity Scan as "Missing varargs init or cleanup".
Fixes: d6e290837e ("tee: add Qualcomm TEE driver")
Signed-off-by: Robertus Diawan Chris <robertusdchris@gmail.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
pKVM must validate the host-provided tracing buffer descriptor.
However, if an error is found, the hypervisor would just return 0 to the
host. Fix the return value on validation failure.
While at it, rename the function to hyp_trace_desc_is_valid() and skip
validation for the nVHE mode as we trust host-provided data in that
case.
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Fixes: 680a04c333 ("KVM: arm64: Add tracing capability for the nVHE/pKVM hyp")
Link: https://lore.kernel.org/r/20260514162624.3477857-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Companion to commit 250f25367b ("KVM: arm64: Tear down vGIC on
failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy()
call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The
kvm_vgic_vcpu_init() failure path immediately above it has the same
shape and still needs the same cleanup.
Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private
IRQs allocated before a redistributor iodev registration failure are
released before the failed vCPU is freed.
Fixes: 03b3d00a70 ("KVM: arm64: vgic: Allocate private interrupts on demand")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://lore.kernel.org/r/20260519135042.2219239-1-michael.bommarito@gmail.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Userspace can restore an ITS Device Table Entry whose Size field encodes
more EventID bits than the virtual ITS supports. The live MAPD path
rejects that state, but vgic_its_restore_dte() accepts it and stores the
out-of-range value in dev->num_eventid_bits.
Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before
allocating the device. This mirrors the MAPD check and prevents the
restored state from reaching vgic_its_restore_itt(), where the unchecked
value can be converted into an oversized scan_its_table() range.
Fixes: 57a9a11715 ("KVM: arm64: vgic-its: Device table save/restore")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://lore.kernel.org/r/20260519132519.2142458-1-michael.bommarito@gmail.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
atmel-isc has been in staging pending removal since 2022.
Hence remove now.
Signed-off-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2
controls and before registering the video device. If any of those later
steps fails, probe returns through the exit label after freeing only the
control handler.
A failed probe does not call si476x_radio_remove(), so the
v4l2_device_unregister() there is not reached. This leaves the parent
device reference taken by v4l2_device_register() behind on the error path.
Unregister the V4L2 device in the probe error path after freeing the
controls.
Fixes: b879a9c2a7 ("[media] v4l2: Add a V4L2 driver for SI476X MFD")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
pwc_isoc_init() submits its isochronous URBs with
usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is
submitted, its completion handler pwc_isoc_handler() can run on another
CPU before the loop finishes:
start_streaming()
pwc_isoc_init()
usb_submit_urb(urbs[0], GFP_KERNEL)
pwc_isoc_handler(urbs[0])
pdev->fill_buf =
pwc_get_next_fill_buf(pdev)
usb_submit_urb(urbs[i>0], ..) -> fails
pwc_isoc_cleanup(pdev) /* kills URBs */
return ret;
pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED)
pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and
stores it in pdev->fill_buf. The error path in start_streaming() only
drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is
leaked. vb2_start_streaming() then triggers
WARN_ON(owned_by_drv_count).
stop_streaming() already handles this since commit 80b0963e16
("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the
teardown path but not in the start_streaming() error path. Mirror that
handling on failure so start_streaming() returns with no buffer owned
by the driver.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/
Fixes: 885fe18f55 ("[media] pwc: Replace private buffer management code with videobuf2")
Cc: stable@vger.kernel.org
Signed-off-by: Valery Borovsky <vebohr@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
commit bb88e8da00 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site.
Fixes: bb88e8da00 ("erofs: use meta buffers for xattr operations")
Signed-off-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Fixes: bb88e8da00 ("erofs: use meta buffers for xattr operations")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
After unaligned compressed extents were introduced, the following race
could occur:
[Thread 1] [Thread 2]
(z_erofs_fill_bio_vec)
<handle a Z_EROFS_PREALLOCATED_FOLIO folio>
...
filemap_add_folio (1)
(z_erofs_bind_cache)
<the same folio is found..>
..
..
folio_attach_private (2)
filemap_add_folio (3) again
Since (1) is executed but (2) hasn't been executed yet, it's possible
that another thread finds the same managed folio in z_erofs_bind_cache()
for a different pcluster and calls filemap_add_folio() again since
folio->private is still Z_EROFS_PREALLOCATED_FOLIO.
Fix this by explicitly clearing folio->private before making the folio
visible in the managed cache so that another pcluster can simply wait
on the locked managed folio as what we did for other shared cases [1].
This only impacts unaligned data compression (`-E48bit` with zstd,
for example).
[1] Commit 9e2f9d34dd ("erofs: handle overlapped pclusters out of
crafted images properly") was originally introduced to handle crafted
overlapped extents, but it addresses unaligned extents as well.
Fixes: 7361d1e376 ("erofs: support unaligned encoded data")
Reported-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Closes: https://lore.kernel.org/r/4a2f3801-fac1-42fe-ae75-da315822e088@salutedevices.com
Tested-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
params_from_user() may acquire tee_shm references for MEMREF parameters
before failing after partially processing the supplied parameter array.
In tee_ioctl_supp_recv(), those references are currently not released on
that error path.
Fix this by freeing MEMREF references before returning when
params_from_user() fails.
Keep the final cleanup path in tee_ioctl_supp_recv() unchanged since
supp_recv() may consume and replace the supplied parameters, unlike the
other TEE ioctl callback paths.
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
register_shm_helper() allocates shm before calling
iov_iter_npages(). If iov_iter_npages() returns 0, the function
jumps to err_ctx_put and leaks shm.
This can be triggered by TEE_IOC_SHM_REGISTER with
struct tee_ioctl_shm_register_data where length is 0.
Jump to err_free_shm instead.
Fixes: 7bdee41575 ("tee: Use iov_iter to better support shared buffer registration")
Cc: stable@vger.kernel.org
Cc: lvc-project@linuxtesting.org
Signed-off-by: Georgiy Osokin <g.osokin@auroraos.dev>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The tee_ioctl_object_invoke_arg structure has padding on some
architectures but not on x86-32 and a few others:
include/linux/tee.h:474:32: error: padding struct to align 'params' [-Werror=padded]
I expect that all current users of this are on architectures that do
have implicit padding here (arm64, arm, x86, riscv), so make the padding
explicit in order to avoid surprises if this later gets used elsewhere.
Fixes: d5b8b0fa17 ("tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
scarlett2_hwdep_write() rejects writes when offset + count is greater than
or equal to the selected flash segment size. That incorrectly treats a
write ending exactly at the end of the segment as out of space, although
the last byte written is still within the segment.
Split invalid argument checks from the segment-space check, keep
zero-length writes as no-ops, and compare count against the remaining
segment size. This permits exact-end writes and avoids relying on
offset + count before deciding whether the request is in bounds.
Fixes: 1abfbd3c95 ("ALSA: scarlett2: Add support for uploading new firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260519-alsa-scarlett2-flash-write-boundary-v1-1-b550480e92da@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the HP ProBook 440 G6, the HP ProBook 430 G6 needs
the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk for its
mute and microphone mute LEDs.
Tested on a HP ProBook 430 G6.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Link: https://patch.msgid.link/20260519140248.4211-2-mail@mariushoch.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pending irq work might be still floating while the assigned stream
has been already closed, which may lead to UAF, especially when
another async work for fasync is involved.
For addressing this, extend the hda_controller_ops for allowing the
extra cleanup procedure that is specific to the controller driver, and
make sure to cancel and sync the pending irq work at each PCM close
before releasing the resources.
Reported-by: Jake Lamberson <lamberson.jake@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-2-tiwai@suse.de
Currently, the delayed IRQ handling for PCM streams is managed in a
single work embedded in hda_intel, but this is basically a per-stream
thing. Due to the single work, we can't cancel the work properly at
closing each stream, for example.
For making the IRQ pending work to be stream-based, this patch changes
the following:
- An extended version of azx_dev (i.e. the hd-audio stream object) is
defined for snd-hda-intel
- The irq_pending flag and irq_pending_work are moved to
hda_intel_stream, so that they can be hda-intel stream specific
- The stream creation and assignment are refactored so that
snd-hda-intel can handle individually;
the snd-hda-intel specific workaround for stream tags is also moved
to snd-hda-intel itself instead of the common code
- The irq pending work is canceled properly at free / shutdown
While we're at it, changed the bit field flag to bool, as the bit
field doesn't help much in our case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-1-tiwai@suse.de
The current ALSA sequencer core tries to register the new kernel
sequencer port on the list at first, then fill up the port
information. This means that user-space may sneak the wrong
information before the actual data is filled, which isn't ideal.
Although the user-space should try to query the port info after the
port registration notification is sent out, it'd be still better to
have a port available with the full info from the beginning.
This patch changes the sequencer port creation and registration
procedure; now split to two steps, for creation and insertion, and the
port is registered after the information is filled.
Link: https://sashiko.dev/#/patchset/20260518194023.1667857-1-maoyixie.tju%40gmail.com
Link: https://patch.msgid.link/20260519094254.465041-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20260519150819.1591409-2-u.kleine-koenig@baylibre.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
__bpf_dynptr_data() can return NULL (FILE dynptrs, any non-contiguous
backing). bpf_verify_pkcs7_signature() forwards the pointer to
verify_pkcs7_signature() unchecked, causing a NULL deref in
asn1_ber_decoder() reachable from a sleepable BPF LSM at lsm.s/bpf.
NULL-check both pointers and reject with -EINVAL. Mirrors the guards
already in kernel/bpf/crypto.c.
Fixes: 865b0566d8 ("bpf: Add bpf_verify_pkcs7_signature() kfunc")
Reported-by: Xianrui Dong <dongxianrui1@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260520024059.313468-1-kpsingh@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Adreno and MDSS drivers need to know whether to enable AMSBC. Add
separate helper, describing that feature.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define special helper returning version setting for MDSS and A8xx
drivers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-3-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the comment for the macrotile_mode and introduce separate
revision for UBWC 3.0 + 8-channel macrotiling mode. It is not used by
the database (since the drivers are not yet changed to handle it yet).
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-ubwc-rework-v4-2-c19593d20c1d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix a typo and a redundant phrase in the block comment above
__sys_accept4(): "thats" -> "that's", and drop the trailing
"to recvmsg" that repeats the recvmsg() reference earlier in
the same sentence.
No functional change.
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Link: https://patch.msgid.link/20260516101109.479042-1-avinash.duduskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash.
Fixes: bc90fbe0c3 ("pds_core: Rework teardown/setup flow to be more common")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-3-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix two cases where pdsc_devcmd_wait() returns stale success from
the completion register instead of an error:
1. FW crash: If firmware stops running, the wait loop breaks early with
running=false. The condition "if ((!done || timeout) && running)" is
false, so error handling is bypassed and stale status is returned.
Check !running first and return -ENXIO.
2. Timeout: If a command times out, err is set to -ETIMEDOUT but then
overwritten by pdsc_err_to_errno(status) which reads stale status.
Return -ETIMEDOUT immediately after cleaning up.
Both errors now propagate to pdsc_devcmd_locked() which queues
health_work for recovery.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260515212907.998028-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an internal review from Airoha, it was notice that the RX DMA descriptor
bits and mask are wrong. These values probably refer to an old NPU firmware
never published. The previous value works correctly but it was reported
that in some specific condition in mixed scenario with both Ethernet and
WiFi offload it's possible that RX DMA descriptor signal wrong value with
the problem to the RX ring or packets getting dropped.
To handle these specific scenario, apply the new suggested bits mask from
Airoha.
Correct functionality of both AN7581 NPU and MT7996 variant were verified
and confirmed working.
Fixes: a7fc8c641c ("net: airoha: Fix npu rx DMA definitions")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260518134530.3683-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71b ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
when racing like this:
```
thread1 thread2
unix_stream_read_generic
mutex_lock(&u->iolock)
skb_peek(&sk->sk_receive_queue)
skb_peek_next(skb, &sk->sk_receive_queue)
mutex_unlock(&u->iolock)
unix_stream_read_generic
unix_state_lock(sk)
skb_peek(&sk->sk_receive_queue)
unix_state_unlock(sk)
unix_stream_data_wait
unix_state_lock(sk)
tail = skb_peek_tail(&sk->sk_receive_queue)
spin_lock(&sk->sk_receive_queue.lock)
__skb_unlink(skb, &sk->sk_receive_queue)
spin_unlock(&sk->sk_receive_queue.lock)
consume_skb(skb) [frees the SKB]
`tail != last`: false
`tail`: true
`tail->len != last_len` ***UAF***
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c6248 ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5.
Fixes: 2b514574f7 ("net: af_unix: implement splice for stream af_unix sockets")
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518-b4-unix-recv-wait-hotfix-v2-1-83e29ce8ad31@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly.
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolai Buchwitz says:
====================
net: phy: honor eee_disabled_modes when advertising EEE
While debugging why ethtool --show-eee reports "not supported" on a
Raspberry Pi CM4 with eee-broken-1000t / eee-broken-100tx set on the
PHY node, I noticed two phylib helpers copy phydev->supported_eee
into phydev->advertising_eee without applying
phydev->eee_disabled_modes: phy_support_eee() and
phy_advertise_eee_all(). That undoes the filtering phy_probe() set
up after of_set_phy_eee_broken(), so the PHY ends up advertising EEE
for modes that were marked broken in DT (or by the driver via
eee_disabled_modes).
The visible effect on MAC drivers that call phy_support_eee() after
probe (bcmgenet, fec, lan743x, lan78xx, r8169) is that ethtool on the
local interface reports "not supported" (because supported is masked
by eee_disabled_modes and ends up empty), while the link partner
happily sees EEE negotiated and active.
Patch 1 fixes phy_support_eee(). Patch 2 fixes phy_advertise_eee_all(),
which is also reached from genphy_c45_ethtool_set_eee() when user
space passes an empty advertisement.
I went through the other users of supported_eee as suggested by Andrew
and they look fine:
- phy_probe() already masks via eee_disabled_modes after
of_set_phy_eee_broken().
- genphy_c45_ethtool_get_eee() masks supported_eee with
eee_disabled_modes when reporting to user space.
- genphy_c45_ethtool_set_eee() masks user-supplied adv against
eee_disabled_modes, and the empty-adv path is now covered by
patch 2.
- genphy_c45_read_eee_abilities(), read_eee_cap1/cap2 populate
supported_eee from PHY registers (source of truth).
- genphy_c45_read_eee_adv(), read_eee_lpa() and write_eee_adv() use
supported_eee only to gate which MMD registers to access, not to
construct an advertisement.
====================
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-0-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_advertise_eee_all() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. genphy_c45_ethtool_set_eee() calls this helper
when user space passes an empty advertisement, undoing the filtering.
Apply the same eee_disabled_modes mask in phy_advertise_eee_all() so
the filtering survives the copy, matching the pattern in phy_probe()
and phy_support_eee().
Fixes: b64691274f ("net: phy: add helper phy_advertise_eee_all")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-2-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_support_eee() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. MAC drivers that call phy_support_eee() after
probe (e.g. bcmgenet, fec, lan743x, lan78xx, r8169) then cause the PHY
to advertise EEE for modes the user marked as broken.
The symptom is that ethtool --show-eee on the local interface reports
"not supported" (supported & ~eee_disabled_modes is empty) while the
link partner sees EEE negotiated and active.
phy_probe() already filters advertising_eee via eee_disabled_modes
after calling of_set_phy_eee_broken(). Apply the same mask in
phy_support_eee() so the filtering survives the copy.
Fixes: 49168d1980 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-1-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genphy_c45_an_config_eee_aneg() writes the EEE advertisement to the
auto-negotiation device's MMD register space (MDIO_MMD_AN, register
MDIO_AN_EEE_ADV). These registers are read by the link partner only
during auto-negotiation, so writing them while autoneg is disabled
cannot influence the link. On some PHYs (e.g. Broadcom BCM54213PE)
the write nevertheless reaches the chip and disturbs the receive
datapath.
Concretely, running
ethtool -s eth0 speed 100 duplex full autoneg off
ethtool --set-eee eth0 eee off
leaves eth0 with TX working and RX completely silent on a
Raspberry Pi 4 / CM4 board (bcmgenet + BCM54213PE in rgmii-rxid).
Switching back to autoneg recovers the link.
Prior to commit f26a29a038 ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled"),
the disable path was effectively a no-op because the helper read
the stale eee_cfg.eee_enabled, so the underlying PHY behavior never
surfaced.
Bisected on rpi-6.12.y between commits 83943264 (good) and
effcbc88 (bad) to f26a29a038.
Fixes: f26a29a038 ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260516150251.879680-1-nerijus.bendziunas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump_class_stats() and htb_offload_aggregate_stats()
call gnet_stats_basic_sync_init(&cl->bstats) which
is wrong on 32bit arches when syncp is cleared.
Make sure to acquire qdisc spinlock and use
_bstats_set() to ease future lockless dumps.
Fixes: 8327158624 ("sch_htb: Stats for offloaded HTB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518090518.629245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the generic IRQ entry/exit infrastructure on PowerPC by selecting
GENERIC_ENTRY and integrating the architecture-specific interrupt and
syscall handlers with the generic entry/exit APIs.
This change replaces PowerPC’s local interrupt entry/exit handling with
calls to the generic irqentry_* helpers, aligning the architecture with
the common kernel entry model. The macros that define interrupt, async,
and NMI handlers are updated to use irqentry_enter()/irqentry_exit()
and irqentry_nmi_enter()/irqentry_nmi_exit() where applicable also
convert the PowerPC syscall entry and exit paths to use the generic
entry/exit framework and integrating with the common syscall handling
routines.
Key updates include:
- The architecture now selects GENERIC_ENTRY in Kconfig.
- Replace interrupt_enter/exit_prepare() with arch_interrupt_* helpers.
- Integrate irqentry_enter()/exit() in standard and async interrupt paths.
- Integrate irqentry_nmi_enter()/exit() in NMI handlers.
- Remove redundant irq_enter()/irq_exit() calls now handled generically.
- Use irqentry_exit_cond_resched() for preemption checks.
- interrupt.c and syscall.c are simplified to delegate context
management and user exit handling to the generic entry path.
- The new pt_regs field `exit_flags` introduced earlier is now used
to carry per-syscall exit state flags (e.g. _TIF_RESTOREALL).
- Remove unused code.
This change establishes the necessary wiring for PowerPC to use the
generic IRQ entry/exit framework while maintaining existing semantics.
This aligns PowerPC with the common entry code used by other
architectures and reduces duplicated logic around syscall tracing,
context tracking, and signal handling.
The performance benchmarks from perf bench basic syscall are below:
perf bench syscall usec/op (-ve is improvement)
| Syscall | Base | test | change % |
| ------- | ----------- | ----------- | -------- |
| basic | 0.093543 | 0.093023 | -0.56 |
| execve | 446.557781 | 450.107172 | +0.79 |
| fork | 1142.204391 | 1156.377214 | +1.24 |
| getpgid | 0.097666 | 0.092677 | -5.11 |
perf bench syscall ops/sec (+ve is improvement)
| Syscall | Base | New | change % |
| ------- | -------- | -------- | -------- |
| basic | 10690548 | 10750140 | +0.56 |
| execve | 2239 | 2221 | -0.80 |
| fork | 875 | 864 | -1.26 |
| getpgid | 10239026 | 10790324 | +5.38 |
IPI latency benchmark (-ve is improvement)
| Metric | Base (ns) | New (ns) | % Change |
| -------------- | ------------- | ------------- | -------- |
| Dry run | 583136.56 | 584136.35 | 0.17% |
| Self IPI | 4167393.42 | 4149093.90 | -0.44% |
| Normal IPI | 61769347.82 | 61753728.39 | -0.03% |
| Broadcast IPI | 2235584825.02 | 2227521401.45 | -0.36% |
| Broadcast lock | 2164964433.31 | 2125658641.76 | -1.82% |
Thats very close to performance earlier with arch specific handling.
Signed-off-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-8-mkchauras@gmail.com
Move interrupt entry and exit helper routines from interrupt.h into the
PowerPC-specific entry-common.h header as a preparatory step for enabling
the generic entry/exit framework.
This consolidation places all PowerPC interrupt entry/exit handling in a
single common header, aligning with the generic entry infrastructure.
The helpers provide architecture-specific handling for interrupt and NMI
entry/exit sequences, including:
- arch_interrupt_enter/exit_prepare()
- arch_interrupt_async_enter/exit_prepare()
- arch_interrupt_nmi_enter/exit_prepare()
- Supporting helpers such as nap_adjust_return(), check_return_regs_valid(),
debug register maintenance, and soft mask handling.
The functions are copied verbatim from interrupt.h.Subsequent patches will
integrate these routines into the generic entry/exit flow.
No functional change intended.
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-7-mkchauras@gmail.com
Add a new field `exit_flags` in the pt_regs structure. This field will hold
the flags set during interrupt or syscall execution that are required during
exit to user mode.
Specifically, the `TIF_RESTOREALL` flag, stored in this field, helps the
exit routine determine if any NVGPRs were modified and need to be restored
before returning to userspace.
This addition ensures a clean and architecture-specific mechanism to track
per-syscall or per-interrupt state transitions related to register restore.
Changes:
- Add `exit_flags` and `__pt_regs_pad` to maintain 16-byte stack alignment
- Update asm-offsets.c and ptrace.c for offset and validation
- Update PT_* constants in uapi header to reflect the new layout
Signed-off-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Tested-by: Samir M <samir@linux.ibm.com>
Tested-by: David Gow <davidgow@google.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427122742.210074-6-mkchauras@gmail.com
