The original MLSR link decision refers to RSSI, but it should be
based on the premise of an existing link. Otherwise, make a link
decision to select a new link from any available band.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260429132625.1659182-2-pkshih@realtek.com
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks.
Link: https://lore.kernel.org/all/fbde0659-78f3-46e4-98cf-d832f765a18b@ideasonboard.com/
Cc: stable@vger.kernel.org # 6.1.x
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260505134705.188661-2-ivitro@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The zynqmp-dpsub driver does not have build time dependencies on the PHY
or DMA drivers. These are runtime hardware restrictions.
Make the two dependencies optional if COMPILE_TEST.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260505094716.1784225-1-wenst@chromium.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add a new fixup for the mute LED on the HP Pavilion 15-cs1xxx series
using the VREF on NID 0x1b.
The BIOS on these models (tested up to F.32) incorrectly reports
the mute LED on NID 0x18 via DMI OEM strings, which lacks VREF
capabilities. This fixup overrides the LED pin to the correct
NID 0x1b.
Signed-off-by: Rodrigo Faria <rodrigofilipefaria@gmail.com>
Link: https://patch.msgid.link/20260505185518.23625-1-rodrigofilipefaria@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The sequencer UAPI defines group_filter as an unsigned int bitmap.
Bit 0 filters groupless messages and bits 1-16 filter UMP groups 1-16.
The internal snd_seq_client storage is only unsigned short, so bit 16
is truncated when userspace sets the filter. The same truncation affects
the automatic UMP client filter used to avoid delivery to inactive
groups, so events for group 16 cannot be filtered.
Store the internal bitmap as unsigned int and keep both userspace-provided
and automatically generated values limited to the defined UAPI bits.
Fixes: d2b7060777 ("ALSA: seq: Add UMP group filter")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260506-alsa-seq-ump-group16-filter-v1-1-b75160bf6993@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices malfunction when connected to a network with 40 MHz channel
width, because they don't support that.
RTL8188FU, RTL8192FU, and RTL8710BU (RTL8188GU) have a way to signal
this (and some other capabilities) to the driver. Get this information
from the hardware and advertise 40 MHz support only when the hardware
can handle it. We assume the other chips can always handle it.
RTL8710BU needs a different way to retrieve this information, which will
be implemented some other time.
Fixes: dbf9b7bb0e ("wifi: rtl8xxxu: Enable 40 MHz width by default")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221394
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c57de68e-5d57-4c26-898f-8a284bb25381@gmail.com
If we need to register a dummy fixed-frequency clock, always register it
using a device-specific name.
This supports the use case where a system has two of the same sensor,
meaning two instances of the same driver, which previously both tried
(and failed) to create a clock with the same name.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If CONFIG_MEDIA_CONTROLLER is undefined, media_request_object_find() will
always return NULL, so its 2nd call in v4l2_ctrl_request_complete() would
fail as well as the 1st one and thus cause hdl to have a wrong value (at
the top of memory) and list_for_each_entry() to iterate over the garbage
data located there. Add NULL check for the 2nd call and place the error
cleanup at the end of v4l2_ctrl_request_complete()...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: c3bf5129f3 ("media: v4l2-ctrls: always copy the controls on completion")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
devm_platform_ioremap_resource() returns an error pointer on failure, not
NULL.
Fix the check to use IS_ERR() and return PTR_ERR() to correctly handle
allocation failures.
Fixes: 2f59ca1854 ("irqchip/starfive: Use devm_ interfaces to simplify resource release")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://patch.msgid.link/20260506041413.1670799-1-nichen@iscas.ac.cn
kconfiglint reports:
K002: config VIDEO_TEGRA_VDE selects visible symbol SRAM which has
dependencies
VIDEO_TEGRA_VDE selects SRAM, which is defined in drivers/misc/Kconfig as:
config SRAM
bool "Generic on-chip SRAM driver"
depends on HAS_IOMEM
The NVIDIA Tegra video decoder driver was originally introduced in
commit cd6c56feb5 ("media: staging: media: Introduce NVIDIA Tegra video
decoder driver") as a staging driver with
`depends on ARCH_TEGRA || COMPILE_TEST` and
`select SRAM`. Since all Tegra SoCs have HAS_IOMEM, the SRAM dependency was
implicitly satisfied for real hardware configurations.
The driver was later de-staged in commit 8bd4aaf438 ("media: staging:
tegra-vde: De-stage driver") and relocated to
drivers/media/platform/nvidia/tegra-vde/ in commit 9b18ef7c9f ("media:
platform: rename tegra/vde/ to nvidia/tegra-vde/"). Throughout these moves,
the `select SRAM` remained without a corresponding HAS_IOMEM dependency.
Under COMPILE_TEST on a hypothetical architecture without HAS_IOMEM (such
as UML in some configurations), the select would force SRAM on without its
HAS_IOMEM dependency being met. Add an explicit `depends on HAS_IOMEM` to
make the dependency chain complete and prevent this misconfiguration under
COMPILE_TEST.
Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
cancel_delayed_work_sync() is called before i2c_mux_del_adapters()
in rtl2832_remove(). While the cancel waits for any running instance
of i2c_gate_work to finish, it does not prevent the timer from being
rescheduled by a concurrent thread.
During probe, the r820t_attach() call attempts I2C transfers through
the mux adapter. These transfers go through i2c_mux_master_xfer(),
which calls rtl2832_deselect() after the transfer completes,
rescheduling i2c_gate_work via schedule_delayed_work(). If this
transfer is still in flight when rtl2832_remove() runs,
rtl2832_deselect() can reschedule i2c_gate_work after it has been
cancelled, causing a use-after-free when kfree(dev) is called.
Fix this by calling i2c_mux_del_adapters() before
cancel_delayed_work_sync(). Once the mux adapter is unregistered, no
new I2C transfers can go through it, so rtl2832_deselect() can no
longer reschedule i2c_gate_work. The subsequent
cancel_delayed_work_sync() is then guaranteed to be final.
Fixes: cddcc40b1b ("[media] rtl2832: convert to use an explicit i2c mux core")
Cc: stable@vger.kernel.org
Reported-by: syzbot+019ced393ab913002b75@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=019ced393ab913002b75
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
res_get() is called before em28xx_init_usb_xfer(), but the error
path of em28xx_init_usb_xfer() does not release the resource,
leading to a persistent busy state.
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
list_first_entry() does not returns NULL when the list is known to be
non-empty. The NULL check before list_del_init() is therefore
redundant.
Remove the unnecessary check.
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In saa7134_video_init1(), the return value of the first
saa7134_pgtable_alloc() is not checked. If it fails, the function
continues as if successful, leaving the driver with an invalid page
table. Additionally, if vb2_queue_init() for the VBI queue fails after
the video queue page table has been allocated, the allocated memory is
not freed before returning. The second saa7134_pgtable_alloc() also
lacks a return value check. Errors occur during device probing before
the device is fully registered, the normal cleanup path in
saa7134_finidev() is not executed, leading to memory leaks and
potential use of uninitialized DMA resources.
Check the return value of both saa7134_pgtable_alloc() calls and
propagate errors. On failure of any later step, free allocated page
tables to avoid memory leaks. Ensure control handlers are also
released on error to prevent further resource leakage.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Fixes: a00e68888d ("[media] saa7134: move saa7134_pgtable to saa7134_dmaqueue")
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the driver state lifetime so that it is released on driver unbind.
Fixes: 184a82784d ("[media] cx231xx: use devm_ functions to allocate memory")
Cc: stable@vger.kernel.org # 3.17
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a check for the return value of pci_ioremap_bar()
in cx23885_dev_setup().
If ioremap for BAR0 fails, release the already allocated
PCI memory region,
decrement the device count, and return -ENODEV.
This prevents a potential null pointer dereference and
ensures proper cleanup
on memory mapping failure.
Fixes: d19770e517 ("V4L/DVB (6150): Add CX23885/CX23887 PCIe bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Jun <1742789905@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
vb2_read() and vb2_write() return size_t, but propagate
negative errno values from __vb2_perform_fileio().
This relies on implicit signed/unsigned conversions in callers
(e.g. vb2_fop_read()) to recover error codes:
__vb2_perform_fileio() -> -EINVAL
vb2_read() -> (size_t)-EINVAL
vb2_fop_read() -> -EINVAL
This relies on implicit conversions that are not obvious.
These helpers are exported (EXPORT_SYMBOL_GPL) and part of the
vb2 API, so changing their return type may affect existing users.
However, they conceptually follow read/write semantics, where
ssize_t is typically used to return either a byte count or a
negative error code.
Switch vb2_read() and vb2_write() to ssize_t, and update
__vb2_perform_fileio() accordingly.
Signed-off-by: Zile Xiong <xiongzile99@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b25748fe61 ("[media] v4l: videobuf2: add read() and write() emulator")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove the unused functions __clocksource_update_freq_hz() and
__clocksource_update_freq_khz().
Then make __clocksource_update_freq_scale() static as it is not used
from external callers anymore. Also clean up the comment accordingly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260504-clocksource-update_freq-v2-1-3e696fb01776@linutronix.de
alarm_handle_timer() was converted from returning enum alarmtimer_restart
to void, but the kernel-doc "Return:" line was not removed. Remove the
stale description.
Fixes: 2634303f87 ("alarmtimers: Remove return value from alarm functions")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260429080635.166790-1-zhanxusheng@xiaomi.com
It was reported that the posix_timers test was at times seeing failures
with ITIMER_PROF timers, specifically in cases where the RCU_SOFTIRQ was
taking up significant amounts of time.
Analysis showed that as the time in softirq isn't included in the task
stime + utime accounting used to trigger the SIGPROF so delays from softirq
work could cause it to appear that the signal was incorrectly delayed.
Contributing to this is that the test uses gettimeofday() to measure
itimers, which also means any scheduling delay can also cause failures (as
the task may not be running the entire time).
To fix this, convert all the itimer measurements to use clock_gettime(),
tweaking the logic to use nsecs instead of usecs. Then for ITIMER_PROF
timers, utilize the CLOCK_THREAD_CPUTIME_ID clockid so that it is similarly
measuring the time the task was running.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260428173957.1394265-1-jstultz@google.com
Introduce a script that provides a simple ascii representation of the
timer migration tree on top of boot trace events.
First boot with:
trace_event==tmigr_connect_cpu_parent,tmigr_connect_child_parent
Then parse the result with:
scripts/timer_migration_tree.py < /sys/kernel/tracing/trace
On a system with 8 CPUs, this produces the following output:
Tree for capacity 1024
/-0, node 0, lvl:-1
|
|--1, node 0, lvl:-1
|
|--2, node 0, lvl:-1
|
|--3, node 0, lvl:-1
-- /00000000dcebac8b, node 0, lvl:0
|--4, node 0, lvl:-1
|
|--5, node 0, lvl:-1
|
|--6, node 0, lvl:-1
|
\-7, node 0, lvl:-1
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260423165354.95152-7-frederic@kernel.org
Systems with heterogeneous CPU capacities, such as big.LITTLE, have
reported power issues since the introduction of the new timer migration
code.
Timers migrate from small capacity CPUs to big ones, degrading their
target residency and thus overall power consumption.
Solve this with splitting hierarchies per CPU capacity. For example in
a big.LITTLE machine, split a single hierarchy in two: one for big
capacity CPUs and another one for small capacity CPUs. This way global
timers only migrate across CPUs of the same capacity.
For simplicity purpose, split hierarchies keep the same number of
possible levels as if there were a single hierarchy, even though the
CPUs are distributed between multiple hierarchies. This could be a
problem on NUMA systems with heterogeneous CPU capacities (provided that
ever exists yet) where useless intermediate nodes may be created.
Solving this properly will imply on boot to know in advance how many
capacities are available and the number of CPUs for each of them.
Reported-by: Sehee Jeong <sehee1.jeong@samsung.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260423165354.95152-5-frederic@kernel.org
When a new root is created, the old root is connected to it and
propagates up its own assumed to be active state, since the hotplug
control CPU is itself active and part of the old root.
However with per-capacity hierarchies, this assumption won't be true
anymore because the hotplug control CPU calling the timer migration
prepare callback may not belong to the same hierarchy as the booting
CPU.
To solve this, track the available CPUs per hierarchies so that the
root connection can be offlined to safe CPUs.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260423165354.95152-4-frederic@kernel.org
In order to prepare for separating out CPUs from different capacities in
distinct hierarchies, create a hierarchy structure that group setup
must rely upon.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260423165354.95152-3-frederic@kernel.org
In case of error, we should unwind correctly.
Switching to using dmam_ instead of dma_ and moving the code earlier
fixes the issue.
Fixes: 6f392f3716 ("drm: renesas: rz-du: Implement MIPI DSI host transfers")
Suggested-by: Pavel Machek <pavel@nabladev.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260501132135.196701-1-chris.brandt@renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
The hotplug control CPU is assumed to be active in the hierarchy but
that doesn't imply that the root is active. If the current CPU is not
the one that activated the current hierarchy, and the CPU performing
this duty is still halfway through the tree, the root may still be
observed inactive. And this can break the activation of a new root as in
the following scenario:
1) Initially, the whole system has 64 CPUs and only CPU 63 is awake.
[GRP1:0]
active
/ | \
/ | \
[GRP0:0] [...] [GRP0:7]
idle idle active
/ | \ |
CPU 0 CPU 1 ... CPU 63
idle idle active
2) CPU 63 goes idle _but_ due to a #VMEXIT it hasn't yet reached the
[GRP1:0]->parent dereference (that would be NULL and stop the walk)
in __walk_groups_from().
[GRP1:0]
idle
/ | \
/ | \
[GRP0:0] [...] [GRP0:7]
idle idle idle
/ | \ |
CPU 0 CPU 1 ... CPU 63
idle idle idle
3) CPU 1 wakes up, activates GRP0:0 but didn't yet manage to propagate
up to GRP1:0 due to yet another #VMEXIT.
[GRP1:0]
idle
/ | \
/ | \
[GRP0:0] [...] [GRP0:7]
active idle idle
/ | \ |
CPU 0 CPU 1 ... CPU 63
idle active idle
3) CPU 0 wakes up and doesn't need to walk above GRP0:0 as it's CPU 1
role.
[GRP1:0]
idle
/ | \
/ | \
[GRP0:0] [...] [GRP0:7]
active idle idle
/ | \ |
CPU 0 CPU 1 ... CPU 63
active active idle
4) CPU 0 boots CPU 64. It creates a new root for it.
[GRP2:0]
idle
/ \
/ \
[GRP1:0] [GRP1:1]
idle idle
/ | \ \
/ | \ \
[GRP0:0] [...] [GRP0:7] [GRP0:8]
active idle idle idle
/ | \ | |
CPU 0 CPU 1 ... CPU 63 CPU 64
active active idle offline
5) CPU 0 activates the new root, but note that GRP1:0 is still idle,
waiting for CPU 1 to resume from #VMEXIT and activate it.
[GRP2:0]
active
/ \
/ \
[GRP1:0] [GRP1:1]
idle idle
/ | \ \
/ | \ \
[GRP0:0] [...] [GRP0:7] [GRP0:8]
active idle idle idle
/ | \ | |
CPU 0 CPU 1 ... CPU 63 CPU 64
active active idle offline
6) CPU 63 resumes after #VMEXIT and sees the new GRP1:0 parent.
Therefore it propagates the stale inactive state of GRP1:0 up to
GRP2:0.
[GRP2:0]
idle
/ \
/ \
[GRP1:0] [GRP1:1]
idle idle
/ | \ \
/ | \ \
[GRP0:0] [...] [GRP0:7] [GRP0:8]
active idle idle idle
/ | \ | |
CPU 0 CPU 1 ... CPU 63 CPU 64
active active idle offline
7) CPU 1 resumes after #VMEXIT and finally activates GRP1:0. But it
doesn't observe its parent link because no ordering enforced that.
Therefore GRP2:0 is spuriously left idle.
[GRP2:0]
idle
/ \
/ \
[GRP1:0] [GRP1:1]
active idle
/ | \ \
/ | \ \
[GRP0:0] [...] [GRP0:7] [GRP0:8]
active idle idle idle
/ | \ | |
CPU 0 CPU 1 ... CPU 63 CPU 64
active active idle offline
Such races are highly theoretical and the problem would solve itself
once the old root ever becomes idle again. But it still leaves a taste
of discomfort.
Fix it with enforcing a fully ordered atomic read of the old root state
before propagating the activate state up to the new root. It has a two
directions ordering effect:
* Acquire + release of the latest old root state: If the hotplug control
CPU is not the one that woke up the old root, make sure to acquire its
active state and propagate it upwards through the ordered chain of
activation (the acquire pairs with the cmpxchg() in tmigr_active_up()
and subsequent releases will pair with atomic_read_acquire() and
smp_mb__after_atomic() in tmigr_inactive_up()).
* Release: If the hotplug control CPU is not the one that must wake up
the old root, but the CPU covering that is lagging behind its duty,
publish the links from the old root to the new parents. This way the
lagging CPU will propagate the active state itself.
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260423165354.95152-2-frederic@kernel.org
Now that support for 486 CPUs is gone, remove this
quirk as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ahmed S. Darwish <darwi@linutronix.de>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-7-mingo@kernel.org
This depends on M486 CPU support, which has been removed.
Note that we still keep the RDC321X MFD, watchdog and GPIO
drivers, because apparently there were 586/686 CPUs offered with the
RDC321X, according to Arnd Bergmann:
| "the [RDC321X] product line is still actively developed by RDC
| and DM&P, and I suspect that some of the drivers are still used
| on 586tsc-class (vortex86dx, vortex86mx) and 686-class
| (vortex86dx3, vortex86ex) SoCs that do run modern kernels and
| get updates."
For this reason, update the watchdog driver and offer it on
the broader 32-bit landscape, which has been COMPILE_TEST=y
build-tested previously already:
- depends on X86_RDC321X || COMPILE_TEST
+ depends on X86_32 || COMPILE_TEST
The MFD and GPIO drivers were already independent of CONFIG_X86_RDC321X.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250425084216.3913608-6-mingo@kernel.org
Remove support for TSC-less Pentium variants.
All TSC-capable Pentium variants, derivatives and
clones should still work under the M586TSC or M586MMX
options.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-5-mingo@kernel.org
These are 486 based CPUs, which build option (M486) is now gone
upstream.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-4-mingo@kernel.org
These CPUs lack CMPXCHG8B support, according to Arnd Bergmann:
| "Winchip6 (486-class, no tsc, no cx8) and Winchip3D
| (486-class, with tsc but no cx8)"
Any still available derivatives, if they have TSC and CX8 support,
would work with regular Pentium builds, there's no need to have
a separate build option for them.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-3-mingo@kernel.org
Andres mentioned that he no longer has access to Geode hardware including
the OLPC XO-1, so the MAINTAINERS entry is no longer accurate. I also
noticed that the documentation link no longer works, as the product
was finally discontinued a few years ago.
Aside from the XO-1, there are still a few embeded boards with custom code
in arch/x86/platforms/geode and a number of Geode based thin clients were
shipped that may continue to work without any custom kernel code.
Mark the platform as orphaned, remove the dead link, and update the
files list to include the platform code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andres Salomon <dilinger@queued.net>
Link: https://lore.kernel.org/all/fddba1c8-a95a-490f-962e-8505cb948672@queued.net/
Link: https://patch.msgid.link/20260505212458.2263891-1-arnd@kernel.org
On the RZ/G3L SMARC EVK, suspend to RAM powers down the ITE IT6263 chip.
The display controller driver's system PM callbacks invoke
drm_mode_config_helper_{suspend,resume}, which in turn call the bridge's
atomic_{disable,enable} callbacks to handle suspend/resume for the bridge
without dedicated PM ops.
To support proper reinitialization after power loss, move reset_gpio into
the it6263 struct so it is accessible beyond probe time. Relocate
it6263_hw_reset(), it6263_lvds_set_i2c_addr(), it6263_lvds_config() and
it6263_hdmi_config() from probe to atomic_enable, ensuring the chip is
fully reset and reconfigured on every enable, including after a
suspend/resume cycle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260501061200.20129-1-biju.das.jz@bp.renesas.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmn4cs4WHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImesWZD/9dzqN6UouaxHoSPX/4AulzKqx+
yt5GevqJSTy8LSjLGtDK7bNRI9i2Bf8CZZOwaeufCkWwg7q3ZjV8XunXs2qswh9Q
aM+cPfqTWZSloRM6SfrEN1eSiah6NmyTa/HKKzSP/Z887fAqvSdGlpe950Og6xpI
/tryictfmVUsIJ0UiIBNtFKhJ+BL4q6jPI4OkCtsauXm/t8G+N9sAn6K3e00fD8A
hJMK3i6aKHBaHvFQmPYnm1qq1UYSbX1dqHXxdKvm7ik5uh4ZMK328VQ9Mk1M8Mfh
foOprlzOOVZonDssBx3yYZ6gyVEWtknEpIDWk/4Sbe/xsqOewhLbTg4mbkWAI1dg
iAV16osikLlURYIK3sM4i+QeCP0rlBsK7f7zDEZaZu0AI7wHNJeSVQZATINZiImt
vOLij93FOb8tY31Yn4zZ4wfnOqXCjphr4hC7dOQzBczuU0T4yRvsNrszTaom0pEj
E0YXk0VLfFdFb9jJK0PCcIjoh9jAhNTeUe5gNf5s8c4TOX8UuZspEOkn9grlngA1
CMzNtIvSyFVr6wF2NBJXP0uTI2A3Juzq0VbCxL0QpPIZmps8oVYSUxfgJuaZ0dIl
dQafPju4Yv4qKZFm/+DrkUJDBK1B7f7visAXxc++epyJ9A/kyEkFdhwOjg9QEQ7s
J62BDLoh5MRZlbmyhA==
=S8Cv
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some build and runtime issues after 32BIT Kconfig option enabled,
improve the platform-specific PCI controller compatibility, drop
custom __arch_vdso_hres_capable(), and fix a lot of KVM bugs"
* tag 'loongarch-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Move unconditional delay into timer clear scenery
LoongArch: KVM: Fix HW timer interrupt lost when inject interrupt by software
LoongArch: KVM: Move AVEC interrupt injection into switch loop
LoongArch: KVM: Use kvm_set_pte() in kvm_flush_pte()
LoongArch: KVM: Fix missing EMULATE_FAIL in kvm_emu_mmio_read()
LoongArch: KVM: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
LoongArch: KVM: Fix "unreliable stack" for kvm_exc_entry
LoongArch: KVM: Compile switch.S directly into the kernel
LoongArch: vDSO: Drop custom __arch_vdso_hres_capable()
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
LoongArch: Use per-root-bridge PCIH flag to skip mem resource fixup
LoongArch: Fix SYM_SIGFUNC_START definition for 32BIT
LoongArch: Specify -m32/-m64 explicitly for 32BIT/64BIT
LoongArch: Make CONFIG_64BIT as the default option
In copy mode TX, xsk_skb_destructor_set_addr() stores the 64-bit
descriptor address into skb_shinfo(skb)->destructor_arg (void *) via a
uintptr_t cast:
skb_shinfo(skb)->destructor_arg = (void *)((uintptr_t)addr | 0x1UL);
On 32-bit architectures uintptr_t is 32 bits, so the upper 32 bits of
the descriptor address are silently dropped. In XDP_ZEROCOPY unaligned
mode the chunk offset is encoded in bits 48-63 of the descriptor
address (XSK_UNALIGNED_BUF_OFFSET_SHIFT = 48), meaning the offset is
lost entirely. The completion queue then returns a truncated address to
userspace, making buffer recycling impossible.
Fix this by handling the 32-bit case directly in
xsk_skb_destructor_set_addr(): when !CONFIG_64BIT, allocate an
xsk_addrs struct (the same path already used for multi-descriptor
SKBs) to store the full u64 address. The existing tagged-pointer logic
in xsk_skb_destructor_is_addr() stays unchanged: slab pointers returned
from kmem_cache_zalloc() are always word-aligned and therefore have
bit 0 clear, which correctly identifies them as a struct pointer
rather than an inline tagged address on every architecture.
Factor the shared kmem_cache_zalloc + destructor_arg assignment into
__xsk_addrs_alloc() and add a wrapper xsk_addrs_alloc() that handles
the inline-to-list upgrade (is_addr check + get_addr + num_descs = 1).
The three former open-coded kmem_cache_zalloc call sites now reduce to
a single call each.
Propagate the -ENOMEM from xsk_skb_destructor_set_addr() through
xsk_skb_init_misc() so the caller can clean up the skb via kfree_skb()
before skb->destructor is installed.
The overhead is one extra kmem_cache_zalloc per first descriptor on
32-bit only; 64-bit builds are completely unchanged.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/
Fixes: 0ebc27a4c6 ("xsk: avoid data corruption on cq descriptor number")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-9-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When xsk_build_skb() / xsk_build_skb_zerocopy() sees the first
continuation descriptor, it promotes destructor_arg from an inlined
address to a freshly allocated xsk_addrs (num_descs = 1). The counter
is bumped to >= 2 only at the very end of a successful build (by calling
xsk_inc_num_desc()).
If the build fails in between (e.g. alloc_page() returns NULL with
-EAGAIN, or the MAX_SKB_FRAGS overflow hits), we jump to free_err, skip
calling xsk_inc_num_desc() to increment num_descs and leave the half-built
skb attached to xs->skb for the app to retry. The skb now has
1) destructor_arg = a real xsk_addrs pointer,
2) num_descs = 1
If the app never retries and just close()s the socket, xsk_release()
calls xsk_drop_skb() -> xsk_consume_skb(), which decides whether to
free xsk_addrs by testing num_descs > 1:
if (unlikely(num_descs > 1))
kmem_cache_free(xsk_tx_generic_cache, destructor_arg);
Because num_descs is exactly 1 the branch is skipped and the
xsk_addrs object is leaked to the xsk_tx_generic_cache slab.
Fix it by directly testing if destructor_arg is still addr. Or else it
is modified and used to store the newly allocated memory from
xsk_tx_generic_cache regardless of increment of num_desc, which we
need to handle.
Closes: https://lore.kernel.org/all/20260419045824.D9E5EC2BCAF@smtp.kernel.org/
Fixes: 0ebc27a4c6 ("xsk: avoid data corruption on cq descriptor number")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-8-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix it by explicitly adding kfree_skb() before returning back to its
caller.
How to reproduce it in virtio_net:
1. the current skb is the first one (which means no frag and xs->skb is
NULL) and users enable metadata feature.
2. xsk_skb_metadata() returns a error code.
3. the caller xsk_build_skb() clears skb by using 'skb = NULL;'.
4. there is no chance to free this skb anymore.
Closes: https://lore.kernel.org/all/20260415085204.3F87AC19424@smtp.kernel.org/
Fixes: 30c3055f9c ("xsk: wrap generic metadata handling onto separate function")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-7-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once xsk_skb_init_misc() has been called on an skb, its destructor is
set to xsk_destruct_skb(), which submits the descriptor address(es) to
the completion queue and advances the CQ producer. If such an skb is
subsequently freed via kfree_skb() along an error path - before the
skb has ever been handed to the driver - the destructor still runs and
submits a bogus, half-initialized address to the CQ.
Postpone the init phase when we believe the allocation of first frag is
successfully completed. Before this init, skb can be safely freed by
kfree_skb().
Closes: https://lore.kernel.org/all/20260419045822.843BFC2BCAF@smtp.kernel.org/
Fixes: c30d084960 ("xsk: avoid overwriting skb fields for multi-buffer traffic")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-6-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When xsk_build_skb() processes multi-buffer packets in copy mode, the
first descriptor stores data into the skb linear area without adding
any frags, so nr_frags stays at 0. The caller then sets xs->skb = skb
to accumulate subsequent descriptors.
If a continuation descriptor fails (e.g. alloc_page returns NULL with
-EAGAIN), we jump to free_err where the condition:
if (skb && !skb_shinfo(skb)->nr_frags)
kfree_skb(skb);
evaluates to true because nr_frags is still 0 (the first descriptor
used the linear area, not frags). This frees the skb while xs->skb
still points to it, creating a dangling pointer. On the next transmit
attempt or socket close, xs->skb is dereferenced, causing a
use-after-free or double-free.
Fix by using a !xs->skb check to handle first frag situation, ensuring
we only free skbs that were freshly allocated in this call
(xs->skb is NULL) and never free an in-progress multi-buffer skb that
the caller still references.
Closes: https://lore.kernel.org/all/20260415082654.21026-4-kerneljasonxing@gmail.com/
Fixes: 6b9c129c2f ("xsk: remove @first_frag from xsk_build_skb()")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-5-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a first descriptor (xs->skb == NULL) triggers -EOVERFLOW in
xsk_build_skb_zerocopy() (e.g., MAX_SKB_FRAGS exceeded), the
free_err -EOVERFLOW handler unconditionally dereferences xs->skb
via xsk_inc_num_desc(xs->skb) and xsk_drop_skb(xs->skb), causing
a NULL pointer dereference.
Fix this by guarding the existing xsk_inc_num_desc()/xsk_drop_skb()
calls with an xs->skb check (for the continuation case), and add
an else branch for the first-descriptor case that manually cancels
the one reserved CQ slot and increments invalid_descs by one to
account for the single invalid descriptor.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-4-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix it by explicitly adding kfree_skb() before returning back to its
caller.
How to reproduce it in virtio_net:
1. the current skb is the first one (which means xs->skb is NULL) and
hit the limit MAX_SKB_FRAGS.
2. xsk_build_skb_zerocopy() returns -EOVERFLOW.
3. the caller xsk_build_skb() clears skb by using 'skb = NULL;'. This
is why bug can be triggered.
4. there is no chance to free this skb anymore.
Note that if in this case the xs->skb is not NULL, xsk_build_skb() will
call xsk_drop_skb(xs->skb) to do the right thing.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260502200722.53960-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_checksum_help() is a common helper that writes the folded
16-bit checksum back via skb->data + csum_start + csum_offset,
i.e. it relies on the skb's linear head and fails (with WARN_ONCE
and -EINVAL) when skb_headlen() is 0.
AF_XDP generic xmit takes two very different paths depending on the
netdev. Drivers that advertise IFF_TX_SKB_NO_LINEAR (e.g. virtio_net)
skip the "copy payload into a linear head" step on purpose as a
performance optimisation: xsk_build_skb_zerocopy() only attaches UMEM
pages as frags and never calls skb_put(), so skb_headlen() stays 0
for the whole skb. For these skbs there is simply no linear area for
skb_checksum_help() to write the csum into - the sw-csum fallback is
structurally inapplicable.
The patch tries to catch this and reject the combination with error at
setup time. Rejecting at bind() converts this silent per-packet failure
into a synchronous, actionable -EOPNOTSUPP at setup time. HW csum and
launch_time metadata on IFF_TX_SKB_NO_LINEAR drivers are unaffected
because they do not call skb_checksum_help().
Without the patch, every descriptor carrying 'XDP_TX_METADATA |
XDP_TXMD_FLAGS_CHECKSUM' produces:
1) a WARN_ONCE "offset (N) >= skb_headlen() (0)" from skb_checksum_help(),
2) sendmsg() returning -EINVAL without consuming the descriptor
(invalid_descs is not incremented),
3) a wedged TX ring: __xsk_generic_xmit() does not advance the
consumer on non-EOVERFLOW errors, so the next sendmsg() re-reads
the same descriptor and re-hits the same WARN until the socket
is closed.
Closes: https://lore.kernel.org/all/20260419045822.843BFC2BCAF@smtp.kernel.org/#t
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Fixes: 30c3055f9c ("xsk: wrap generic metadata handling onto separate function")
Link: https://patch.msgid.link/20260502200722.53960-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aditya Garg says:
====================
net: mana: Avoid queue struct allocation failure under memory fragmentation
The MANA driver can fail to load on systems with high memory
utilization because several allocations in the queue setup paths
require large physically contiguous blocks via kmalloc. Under memory
fragmentation these high-order allocations may fail, preventing the
driver from creating queues when opening the interface or when
reconfiguring channels, ring parameters or MTU at runtime.
Allocation sizes that are problematic:
mana_create_txq -> tx_qp flat array (sizeof(mana_tx_qp) = 35528):
16 queues (default): 35528 * 16 = ~555 KB contiguous
64 queues (max): 35528 * 64 = ~2220 KB contiguous
mana_create_rxq -> rxq struct with flex array
(sizeof(mana_rxq) = 35712, rx_oobs=296 per entry):
depth 1024 (default): 35712 + 296 * 1024 = ~331 KB per queue
depth 8192 (max): 35712 + 296 * 8192 = ~2403 KB per queue
mana_pre_alloc_rxbufs -> rxbufs_pre and das_pre arrays:
16 queues, depth 1024 (default): 16 * 1024 * 8 = 128 KB each
64 queues, depth 8192 (max): 64 * 8192 * 8 = 4096 KB each
This series addresses the issue by:
1. Converting the tx_qp flat array into an array of pointers with
per-queue kvzalloc (~35 KB each), replacing a single contiguous
allocation that can reach ~2.2 MB at 64 queues.
2. Switching rxbufs_pre, das_pre, and rxq allocations to
kvmalloc/kvzalloc so the allocator can fall back to vmalloc
when contiguous memory is unavailable.
Throughput testing confirms no regression. Since kvmalloc falls
back to vmalloc under memory fragmentation, all kvmalloc calls
were temporarily replaced with vmalloc to simulate the fallback
path (iperf3, GBits/sec):
Physically contiguous vmalloc region
Connections TX RX TX RX
--------------------------------------------------------------
1 47.2 46.9 46.8 46.6
16 181 181 181 181
32 181 181 181 181
64 181 181 181 181
====================
Link: https://patch.msgid.link/20260502074552.23857-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
