Introduce mlx5 DMA pool and pool-page data structures, and add the
creation and teardown paths.
Each NUMA node owns a set of mlx5_dma_pool instances, each one with a
different block size. The sizes are defined as all powers of two
starting from MLX5_ADAPTER_PAGE_SHIFT and up to PAGE_SHIFT. Since
mlx5_frag_bufs are used to back objects whose sizes are encoded relative
to MLX5_ADAPTER_PAGE_SHIFT, a smaller block_shift value cannot be used.
Requests larger than PAGE_SIZE continue to be handled as page-sized
fragments, as in the existing frag-buf allocation model.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260429201429.223809-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wire mlx5_frag_buf pools init/cleanup hooks into
mlx5_mdev_init()/uninit() and the init unwind path.
Keep temporary no-op stubs in alloc.c so lifecycle ordering is in place
before the coherent DMA sub-page allocator implementation is added in
follow-up patches.
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260429201429.223809-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, hash_item() processes the 6-byte Ethernet address and the
2-byte session ID byte-wise to compute a hash.
Optimize this by using 16-bit word operations: XOR three 16-bit words
from the Ethernet address and the 16-bit session ID, then fold the
result. This reduces the total number of loads and XORs. The Ethernet
addresses in a skb and struct pppoe_addr are both 2-byte aligned, so the
u16 pointer cast is safe.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260429023848.153425-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sagarika Sharma says:
====================
ipv6: fix ECMP route failover on carrier loss
This patchset resolves an issue where established IPv6 connections are
unable to transition to alternative ECMP nexthops upon carrier loss.
Unlike IPv4, the IPv6 routing subsystem does not actively invalidate
cached destinations during a NETDEV_CHANGE event. Sockets persist
with dead routes, leading to stalled traffic or connection drops.
This series introduces a fix to trigger route invalidation by
updating the route serial number on link carrier loss and provides
a corresponding selftest to validate the failover behavior for IPv4
and IPv6.
====================
Link: https://patch.msgid.link/20260430200909.527827-1-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without the previous commit, TCP failed to switch to alternative
IPv6 routes immediately upon carrier loss.
It would persist with the dead route until reaching the threshold
net.ipv4.tcp_retries1, leading to unnecessary delays in failover.
Let's add a selftest for this scenario to ensure TCP fails over
immediately upon a carrier loss event.
Before:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [FAIL]
After:
TEST: TCP IPv4 failover [ OK ]
TEST: TCP IPv6 failover [ OK ]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sagarika Sharma <sharmasagarika@google.com>
Link: https://patch.msgid.link/20260430200909.527827-3-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using IPv6 ECMP routes, if a netdev listed as a nexthop experiences
a carrier change event (e.g., a bond device generating a NETDEV_CHANGE
event after its slaves go linkdown), established connections utilizing
that nexthop fail to fail over to other available nexthops. Instead,
these connections stall or drop.
This happens because the IPv6 FIB code does not invalidate the socket's
cached destination when a NETDEV_CHANGE event occurs. While
fib6_ifdown() correctly marks the nexthop with RTNH_F_LINKDOWN, it
leaves the route's serial number unchanged. As a result, sockets with a
previously cached dst do not realize the route is no longer viable and
continue to try using the non-functional nexthop.
This behavior contrasts with IPv4, which actively flushes cached
destinations on a NETDEV_CHANGE event (see fib_netdev_event() in
net/ipv4/fib_frontend.c).
Fix this by updating the route serial number in fib6_ifdown() when
setting RTNH_F_LINKDOWN. This invalidates stale cached destinations,
forcing sockets to perform a new route lookup and fail over to a
functioning nexthop.
Fixes: 51ebd31815 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: Sagarika Sharma <sharmasagarika@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430200909.527827-2-sharmasagarika@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
My prior patch missed few READ_ONCE()/WRITE_ONCE() annotations.
Fixes: 5154561d9b ("net/sched: sch_pie: annotate data-races in pie_dump_stats()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430080056.35104-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As done for the SW path, configure the QoS channel for HW accelerated
traffic according to the user port index when forwarding to a DSA port,
or rely on the GDM port identifier otherwise. This allows HTB shaping
to be applied to HW accelerated traffic.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260430-airoha-ppe-qos-channel-v1-1-5ef9221e85c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: move some fastpath fields to appropriate groups
Move following fields to better groups to increase data locality.
- delivered
- delivered_ce
- segs_in
- segs_out
- first_tx_mstamp
- delivered_mstamp
- max_packets_out
- cwnd_usage_seq
- rate_delivered
- rate_interval_us
No change in overall tcp_sock size.
====================
Link: https://patch.msgid.link/20260430100021.211139-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
segs_in is changed for each incoming packet, including ACK packets.
segs_out is changed for each outgoing packet, including ACK packets.
They belong to tcp_sock_write_txrx group.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These counters are changed whenever sent data is acknowleged.
They do not belong to tcp_sock_write_txrx group, because TCP receivers
do not touch them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260430100021.211139-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apple Silicon Macs expose two CDC NCM "private" data interfaces over
USB-C with VID:PID 0x05ac:0x1905 and product string "Mac". This is the
same protocol Apple already ships on iPhone (0x05ac:0x12a8) and iPad
(0x05ac:0x12ab) for RemoteXPC since iOS 17 -- both data interfaces lack
an interrupt status endpoint, so they rely on the FLAG_LINK_INTR-
conditional bind path introduced in commit 3ec8d7572a ("CDC-NCM: add
support for Apple's private interface").
The id_table currently has entries for iPhone and iPad but not for the
Mac. Without a match, cdc_ncm falls through to the generic CDC NCM
class-match entry, which uses the FLAG_LINK_INTR-having cdc_ncm_info
struct, so bind_common() fails on the missing status endpoint and no
netdev appears.
Add id_table entries for both interface numbers (0 and 2) of the Mac,
bound to the existing apple_private_interface_info driver_info.
Verified empirically on a Mac Studio M3 Ultra running macOS 26.5: when
a Mac is connected via USB-C, ioreg shows VID 0x05ac, PID 0x1905,
product string "Mac", with two NCM data interfaces at numbers 0 and 2.
The same PID is presented by all current Apple Silicon Mac models
(MacBook Pro/Air, Mac mini, Mac Studio across the M-series), mirroring
Apple's single-PID-per-family pattern from iPhone/iPad.
After this patch, plugging a Mac into a Linux host running the patched
kernel produces two enx... interfaces (one per data interface),
"ip -br link" lists them as UP, and standard userspace networking
(DHCP, NetworkManager shared mode, etc.) works without any modprobe
overrides or out-of-tree modules.
Signed-off-by: Alex Cheema <alex@exolabs.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429175739.34426-1-alex@exolabs.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain devices which support ntuple-filters do not enable the feature
by default. The existing tests will skip (if they check for the feature),
or fail if they blindly attempt to install rules. Therefore, attempt to turn
on ntuple-filters if the device supports them.
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260430165217.3700469-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack
without initialisation:
struct ifla_vf_broadcast vf_broadcast;
The struct contains a single fixed 32-byte field:
/* include/uapi/linux/if_link.h */
struct ifla_vf_broadcast {
__u8 broadcast[32];
};
The function then copies dev->broadcast into it using dev->addr_len
as the length:
memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);
On Ethernet devices (the overwhelming majority of SR-IOV NICs)
dev->addr_len is 6, so only the first 6 bytes of broadcast[] are
written. The remaining 26 bytes retain whatever was previously on
the kernel stack. The full struct is then handed to userspace via:
nla_put(skb, IFLA_VF_BROADCAST,
sizeof(vf_broadcast), &vf_broadcast)
leaking up to 26 bytes of uninitialised kernel stack per VF per
RTM_GETLINK request, repeatable.
The other vf_* structs in the same function are explicitly zeroed
for exactly this reason - see the memset() calls for ivi,
vf_vlan_info, node_guid and port_guid a few lines above.
vf_broadcast was simply missed when it was added.
Reachability: any unprivileged local process can open AF_NETLINK /
NETLINK_ROUTE without capabilities and send RTM_GETLINK with an
IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks
each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per
VF per request. Stack residue at this call site can include return
addresses and transient sensitive data; KASAN with stack
instrumentation, or KMSAN, will flag the nla_put() when reproduced.
Zero the on-stack struct before the partial memcpy, matching the
existing pattern used for the other vf_* structs in the same
function.
Fixes: 75345f888f ("ipoib: show VF broadcast address")
Cc: stable@vger.kernel.org
Signed-off-by: Kai Zen <kai.aizen.dev@gmail.com>
Link: https://patch.msgid.link/3c506e8f936e52b57620269b55c348af05d413a2.1777557228.git.kai.aizen.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Check mrt->mroute_sk earlier in the function.
- Use sock_queue_rcv_skb_reason() instead of sock_queue_rcv_skb().
- Use sk_skb_reason_drop() instead of kfree_skb().
Note that we return -ENOMEM if sock_queue_rcv_skb_reason() failed,
as the precise error is not really needed for callers.
- Remove one net_warn_ratelimited().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260430074004.4133602-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yiming Qian reported:
<quote>
ipmr_cache_report()` allocates a report skb with `alloc_skb(128,
GFP_ATOMIC)` and appends a `struct igmphdr` using `skb_put()`. In the
non-`IGMPMSG_WHOLEPKT` path it initializes only:
- `igmp->type`
- `igmp->code`
but does not initialize:
- `igmp->csum`
- `igmp->group`
Later, `igmpmsg_netlink_event()` copies the bytes after `sizeof(struct
igmpmsg)` into the `IPMRA_CREPORT_PKT` netlink attribute and emits
`RTM_NEWCACHEREPORT` on `RTNLGRP_IPV4_MROUTE_R`.
As a result, 6 bytes of stale heap data from the skb head are
disclosed to userspace.
</quote>
Let's use skb_put_zero() instead of skb_put() to fix this bug.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260430070611.4004529-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core and helpers:
- calculate framebuffer geometry with format helpers
- fix docs
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
xe:
- uapi: Add missing pad and extensions check
- uapi: Reject unsafe PAT indices for CPU cached memory
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge
- Xe3p tuning and workaround fixes
- USE drm mm instead of drm SA for CCS read/write
- Fix leaks and null derefs
- Fix Wa_18022495364
appletbdrm:
- allocate protocol buffers with kvzalloc()
dma-buf:
- fix docs
imagination:
- avoid segfault in debugfs
ofdrm:
- put PCI device reference on errors
udl:
- increase USB timeout
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmn1JYQACgkQDHTzWXnE
hr5rkBAAnAEiMatySCl54Zwt9RlC1S8PDJ+cKW0GbGE6ID3UYMcIgBgXjBfRWPGI
smhCUq1a/tNjIFCO+JCNe3WqX/vhghtJKfh2FJVWy0tu18S/PvrxB5m3Iasm7JfP
NxKGyoVCXknDQW4dMATWrDm5JoqAsh5b59Jf8WCcBrMQXeqVSZgHxXjVkwj8e092
i/FIoS/sV83Lf4xJcm9l25+0OcLhkoLdXz6+r7pwFwsafP07mWbXYXa53efWqy8v
848AH25FaB+cK16QcrluhIvdVFl3iLbX2b7WpJF3TAbDe3Emr4uggBqiqwcI4p5/
rQGfVZkng1FBLOcHBZ7p0Wsa+F35C+6H14R8fueMiOmsgX6pXZLnJJ0KpQvSEc+d
acia8SYp1SGTaxBrdvrhRY6BKtcq/ClOPvbIvV0CPuxFtVNWU940FE+b3V51EpbG
TGhks4Nuh1C7ihm82Kep34pZjx7ZRnQWPAz7Cm9L9ZfX2DOOi9Uu16u71IwgumfL
yp/7Jt06Hx/TS0qWV1dnH3ZtluQgBA/EUARmv1MNyIEvSOjpvKiVqlNJmlPKi0+9
piXl0QUrOQz+Wj9glzcM3ENKh7ZxDFJxcIMkHx7q/wEwSIppnhOPuQAwNXWO4Y4Q
p4X99W+gHfKwVG8BrY5tbW7lbkt8/4MWSR/9R2Vj8prIJCeeKFI=
=wagp
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-05-02' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Fixes for rc2, the usual amdgpu/xe double header, I think xe had a
couple of weeks combined due to some maintainer access issues,
otherwise there's just a few misc fixes and documentation fixups.
core and helpers:
- calculate framebuffer geometry with format helpers
- fix docs
amdgpu:
- GFX12 fix for CONFIG_DRM_DEBUG_MM configs
- Fix DC analog support
- Userq fixes
- GART placement fix
- Aldebaran SMU fixes
- AMDGPU_INFO_READ_MMR_REG fix
- UVD 3.1 fix
- GC 6 TCC fix
- Fix root reservation in amdgpu_vm_handle_fault()
- RAS fix
- Module reload fix for APUs
- Fix build for CONFIG_DRM_FBDEV_EMULATION=n
- IGT DWB regression fix
- GC 11.5.4 fix
- VCN user fence fixes
- JPEG user fence fixes
- SMU 13.0.6 fix
- VCN 3/4 IB parser fixes
- NV3x+ dGPU vblank fix
- DCE6/8 fixes for LVDS/eDP panels without an EDID
amdkfd:
- Fix for when CONFIG_HSA_AMD is not set
- SVM fixes
xe:
- uapi: Add missing pad and extensions check
- uapi: Reject unsafe PAT indices for CPU cached memory
- Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge
- Xe3p tuning and workaround fixes
- USE drm mm instead of drm SA for CCS read/write
- Fix leaks and null derefs
- Fix Wa_18022495364
appletbdrm:
- allocate protocol buffers with kvzalloc()
dma-buf:
- fix docs
imagination:
- avoid segfault in debugfs
ofdrm:
- put PCI device reference on errors
udl:
- increase USB timeout"
* tag 'drm-fixes-2026-05-02' of https://gitlab.freedesktop.org/drm/kernel: (77 commits)
drm/xe/uapi: Reject coh_none PAT index for CPU_ADDR_MIRROR
drm/xe/uapi: Reject coh_none PAT index for CPU cached memory in madvise
drm/xe/xelp: Fix Wa_18022495364
drm/xe/gsc: Fix BO leak on error in query_compatibility_version()
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
drm/xe/bo: Fix bo leak on GGTT flag validation in xe_bo_init_locked()
drm/xe/bo: Fix bo leak on unaligned size validation in xe_bo_init_locked()
drm/xe: Fix potential NULL deref in xe_exec_queue_tlb_inval_last_fence_put_unlocked
drm/xe/vf: Use drm mm instead of drm sa for CCS read/write
drm/xe: Add memory pool with shadow support
drm/xe/debugfs: Correct printing of register whitelist ranges
drm/xe: Mark ROW_CHICKEN5 as a masked register
drm/xe/tuning: Use proper register offset for GAMSTLB_CTRL
drm/xe/xe3p_lpg: Add missing indirect ring state feature flag
drm/xe: Drop redundant rtp entries for Wa_14019988906 & Wa_14019877138
drm/xe/vm: Add missing pad and extensions check
drm/xe: Drop registration of guc_submit_wedged_fini from xe_guc_submit_wedge()
...
The TRENDnet TUC-ET2G V2.0 is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260430213435.21821-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/Space.c is the last remnant of the linux-2.4.x driver model
that required each subsystem and device driver init function to be called
from init/main.c explicitly, before the introduction of initcall levels.
In linux-7.0, this was only used for a handful of ISA network drivers,
with the ne2000 driver being the last one.
Fold the code into ne.c directly, with minimal changes to preserve
the existing command line parsing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cs89x0 driver is really two in one, and they are mutually exclusive:
- the ISA driver was used on 486-era PCs. It likely has no remaining
users, like the other ethernet drivers that got removed in
linux-7.1. The DMA support in here is the last device driver use of
the deprecated isa_bus_to_virt() interface, all other users are either
x86 specific or or got converted to the normal dma-mapping interface.
The driver was maintained by Andrew Morton at the time, based on
the linux-2.2 vendor driver from Cirrus Logic.
- the platform_driver instance was used on some embedded Arm boards
around the same time, such as the EP7211 Development Kit. This
is the same chip, but uses modern devicetree based probing and no DMA.
This was added by Alexander Shiyan.
Remove the ISA driver as a cleanup, including all of the outdated
documentation referring to its configuration.
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429145624.2948432-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We try to validate during registration that the netdev
has ops if it has features. This is currently somewhat sillily
written because we have a dereference before a NULL check
on the ops struct. Straighten this out.
No functional change intended other than saving ourselves
the very theoretical crash with a bad driver.
Note that we check earlier in the function that either ops
or TLS features are set for the device in question.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429213001.1908235-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEjF9xRqF1emXiQiqU1w0aZmrPKyEFAmn0hZ8ACgkQ1w0aZmrP
KyFzNg//ZVbSZyMag+CJoIJv3sMFDJ7uLSEko9mR0nNvo6hPZDWAysCNychhPCDl
w9yiar5wM9W1zcSWvtlBFozZUcS55mQbcqCHNEyJdSjQ1zTr7C9Dl9zDU3jDJEoK
aplUk5VvFYFqEp4Bqy7EA1VGY5uc2WzmbsCAf9Z2pjprTQKD/E5tzyx0RFEPksKU
0pSvsC8VfOES6mJs3KIng6TfvnaC/TWilOtjXC/1y1jl+WftXgwb0gwIVnWKjZnc
yEJ6h4VOiW2NjwcW+gcaaqvt0c1T4EO/bDvuVnCJzwxDZKI2W9KOs8yQytO2hNTo
jrAyjTB0F3yDxcnDP1AO8ipkJzu42wOfZblrZKvSmC4Kwwqq8QlsXqD1HMh3oMqv
JGNJSB8rNbIqt9RTMB+A5wiAZvZbSGZc3qH+y7Z5z/2Zl7u0+Zwl20YZ1r7RqM9Z
Ay/+QzZIyRAyKmQDr8nSoqmBy2i0wfw79NovvhgPDl9qak8Cfc8Df8wkd59t3z33
0VzPO9kieTWW6aqW19l88C7dtspsd93IsMZz3He3Lvy5e4dpPG+2OdLKpPkTYHBg
17KY4Qs7gYM0m5baHlcmana4bZHWcBz146dmIMUuhoj3gPyjgV+s/Hum3YxD/P43
PNA6X8pI38R8O97VkPXYg1aoQIRLt9YsGwVTYxPXv2gZgLD0Acw=
=ASC0
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Replace skb_try_make_writable() by skb_ensure_writable() in
nft_fwd_netdev and the flowtable to deal with uncloned packets
having their network header in paged fragments.
2) Drop packet if output device does not exist and ensure sufficient
headroom in nft_fwd_netdev before transmitting the skb.
3) Use the existing dup recursion counter in nft_fwd_netdev for the
neigh_xmit variant, from Weiming Shi.
4) Add .check_hooks interface to x_tables to detach the control plane
hook check based on the match/target configuration. Then, update
nft_compat to use .check_hooks from .validate path, this fixes a
lack of hook validation for several match/targets.
5) Fix incorrect .usersize in xt_CT, from Florian Westphal.
6) Fix a memleak with netdev tables in dormant state,
from Florian Westphal.
7) Several patches to check if the packet is a fragment, then skip
layer 4 inspection, for x_tables and nf_tables; as well as common
nf_socket infrastructure. The xt_hashlimit match drops fragments
to stay consistent with the existing approach when failing to parse
the layer 4 protocol header.
8) Ensure sufficient headroom in the flowtable before transmitting
the skb.
9) Fix the flowtable inline vlan approach for double-tagged vlan:
Reverse the iteration over .encap[] since it represents the
encapsulation as seen from the ingress path. Postpone pushing
layer 2 header so output device is available to calculate needed
headroom. Finally, add and use nf_flow_vlan_push() to fix it.
10) Fix flowtable inline pppoe with GSO packets. Moreover, use
FLOW_OFFLOAD_XMIT_DIRECT to fill up destination hardware
address since neighbour cache does not exist in pppoe.
11) Use skb_pull_rcsum() to decapsulate vlan and pppoe headers, for
double-tagged vlan in particular this should provide some benefits
in certain scenarios.
More notes regarding 9-11):
- sashiko is also signalling to use it for IPIP headers, but that needs
more adjustments such setting skb->protocol after removing the IPIP
header, will follow up in a separated patch.
- I plan to submit selftests to cover double-tagged-vlan. As for pppoe,
it should be possible but that would mandate a few userspace dependencies.
This has been semi-automatically tested by me and reporters describing
broken double-vlan-tagged and pppoe currently in the flowtable.
* tag 'nf-26-05-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: use skb_pull_rcsum() to pop vlan/pppoe header
netfilter: flowtable: fix inline pppoe encapsulation in xmit path
netfilter: flowtable: fix inline vlan encapsulation in xmit path
netfilter: flowtable: ensure sufficient headroom in xmit path
netfilter: xtables: fix L4 header parsing for non-first fragments
netfilter: nf_tables: skip L4 header parsing for non-first fragments
netfilter: nf_socket: skip socket lookup for non-first fragments
netfilter: nf_tables: fix netdev hook allocation memleak with dormant tables
netfilter: xt_CT: fix usersize for v1 and v2 revision
netfilter: nft_compat: run xt_check_hooks_{match,target}() from .validate
netfilter: x_tables: add .check_hooks to matches and targets
netfilter: nft_fwd_netdev: use recursion counter in neigh egress path
netfilter: nft_fwd_netdev: add device and headroom validate with neigh forwarding
netfilter: replace skb_try_make_writable() by skb_ensure_writable()
====================
Link: https://patch.msgid.link/20260501122237.296262-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Avoid writing an uninitialised stack variable to POR_EL0 on
sigreturn if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
-----BEGIN PGP SIGNATURE-----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=a9er
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid writing an uninitialised stack variable to POR_EL0 on sigreturn
if the poe_context record is absent
- Reserve one more page for the early 4K-page kernel mapping to cover
the extra [_text, _stext) split introduced by the non-executable
read-only mapping
- Force the arch_local_irq_*() wrappers to be __always_inline so that
noinstr entry and idle paths cannot call out-of-line, instrumentable
copies
- Fix potential sign extension in the arm64 SCS unwinder's DWARF
advance_loc4 decoding
- Tolerate arm64 ACPI platforms with only WFI and no deeper PSCI idle
states, restoring cpuidle registration on such systems
- Include the UAPI <asm/ptrace.h> header in the arm64 GCS libc test
rather than carrying a duplicate struct user_gcs definition (the
original #ifdef NT_ARM_GCS was wrong to cover the structure
definition as it would be masked out if the toolchain defined it)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Preserve POR_EL0 if poe_context is missing
arm64: Reserve an extra page for early kernel mapping
kselftest/arm64: Include <asm/ptrace.h> for user_gcs definition
ACPI: arm64: cpuidle: Tolerate platforms with no deep PSCI idle states
arm64/irqflags: __always_inline the arch_local_irq_*() helpers
arm64/scs: Fix potential sign extension issue of advance_loc4
ib_dma_map_sg() modifies the provided scatterlist and returns the
number of mapped entries, which can be fewer than the requested
mr->sgt.nents if the DMA controller coalesces contiguous memory
segments. Passing the original, uncoalesced count to ib_map_mr_sg()
causes memory registration failures if coalescing actually occurs.
Capture the actual mapped count returned by ib_dma_map_sg() and pass it
to ib_map_mr_sg() to ensure correct MR registration.
Also update the ib_dma_map_sg() error logging to drop the error
pointer formatting, since the return value is an integer count
rather than an error code.
Ensure a proper error code (-EIO) is assigned when DMA mapping or
MR registration fails.
Fixes: de5ef8ec3c ("smb: smbdirect: introduce smbdirect_mr.c with client mr code")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221408
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Yi Kuo <yi@yikuo.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
This makes it easier to rebuild cifs.ko and ksmbd.ko against
a running kernel.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-cifs/aehrPuY60VMcYGU8@infradead.org/
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is a better solution than
EXPORT_SYMBOL_FOR_MODULES(__sym, "cifs,ksmbd") as it makes
it possible to rebuild smbdirect.ko against a
running kernel and then load the existing cifs.ko and ksmbd.ko
from the running kernel.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-cifs/aehrPuY60VMcYGU8@infradead.org/
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The UE and UE_NF cases check ce_count against UINT_MAX before incrementing
their respective counters. This is logically incorrect and prevents
ue_count and ue_nf_count from incrementing when ce_count reaches UINT_MAX.
Fixes: c11a50b170 ("accel/qaic: Add Reliability, Accessibility, Serviceability (RAS)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260410112015.592546-1-alok.a.tiwari@oracle.com
-----BEGIN PGP SIGNATURE-----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=/qwt
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20260501' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
- Ensure SELinux is always properly accessing its own sock LSM state
- Only reserve an xattr slot for SELinux if it will be used
- Fix a SELinux auditing regression in the directory avdcache
* tag 'selinux-pr-20260501' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix avdcache auditing
selinux: don't reserve xattr slot when we won't fill it
selinux: use sk blob accessor in socket permission helpers
Currently need_futex_hash_allocate_default() depends on strict pthread
semantics, abusing CLONE_THREAD. This breaks the non-concurrency
assumptions when doing the mm->futex_ref pcpu allocations, leading to
bugs[0] when sharing the mm in other ways; ie:
BUG: KASAN: slab-use-after-free in futex_hash_put
... where the +1 bias can end up on a percpu counter that mm->futex_ref
no longer points at.
Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding
vfork keeps the existing paths untouched (no overhead), and we can't
race in the first place: either the parent is suspended and the child
runs alone, or mm->futex_ref is already allocated from an earlier
CLONE_VM.
Link: https://lore.kernel.org/all/CAL_bE8LsmCQ-FAtYDuwbJhOkt9p2wwYQwAbMh=PifC=VsiBM6A@mail.gmail.com/ [0]
Fixes: d9b05321e2 ("futex: Move futex_hash_free() back to __mmput()")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Reject zero-length writes from userspace that corrupt
Debug Facility buffers
- Replace one s390 PCI maintainer
- Remove SCLP_OFB Kconfig option and enable the guarded code
unconditionally
- Replace incorrect use of phys_to_folio() to virt_to_folio()
in do_secure_storage_access()
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCafTJpBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OEgAQDsVJ448e9YY4j5e+zk5Q3m1Eag
q5SIntMSb7r7df0AiAEAuiiNQWQMeDjPYpuOOS2SVp0qj2bf3y6RlHgD0sb1OAs=
=UkrI
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Reject zero-length writes from userspace that corrupt Debug Facility
buffers
- Replace one s390 PCI maintainer
- Remove SCLP_OFB Kconfig option and enable the guarded code
unconditionally
- Replace incorrect use of phys_to_folio() to virt_to_folio() in
do_secure_storage_access()
* tag 's390-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix phys_to_folio() usage in do_secure_storage_access()
s390/sclp: Remove SCLP_OFB Kconfig option
MAINTAINERS: Replace one of the maintainers for s390/pci
s390/debug: Reject zero-length input in debug_input_flush_fn()
s390/debug: Reject zero-length input before trimming a newline
All alarmtimer users are converted to alarm_start_timer(). Remove the now
unused interfaces.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/20260408114952.670899355@kernel.org
The existing alarm_start() interface is replaced with the new
alarm_start_timer() mechanism, which does not longer queue an already
expired timer and returns the state.
Adjust the code to utilize this so it schedules the work in the case that
the timer was already expired. Unlikely to happen as the timeout is at
least a second, but not impossible especially with virtualization.
No functional change intended
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260408114952.604232981@kernel.org
The existing alarm_start() interface is replaced with the new
alarm_start_timer() mechanism, which does not longer queue an already
expired timer and returns the state. Adjust the code to utilize this.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260408114952.536945376@kernel.org
Like any other user controlled interface, timerfd based timers can be
programmed with expiry times in the past or vary small intervals.
Both hrtimer and alarmtimer provide new interfaces which return the queued
state of the timer. If the timer was already expired, then let the callsite
handle the timerfd context update so that the full round trip through the
hrtimer interrupt is avoided.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/20260408114952.469141112@kernel.org
Use the new alarm_start_timer() for arming and rearming posix interval
timers and for clock_nanosleep() so that already expired timers do not go
through the full timer interrupt cycle.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260408114952.400451460@kernel.org
Alarm timers utilize hrtimers for normal operation and only switch to the
RTC on suspend. In order to catch already expired timers early and without
going through a timer interrupt cycle, provide a new start function which
internally uses hrtimer_start_range_ns_user().
If hrtimer_start_range_ns_user() detects an already expired timer, it does
not queue it. In that case remove the timer from the alarm base as well.
Return the status queued or not back to the caller to handle the early
expiry.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260408114952.332822525@kernel.org
Switch the arm and rearm callbacks for hrtimer based posix timers over to
hrtimer_start_expires_user() so that already expired timers are not
queued. Hand the result back to the caller, which then queues the signal.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260408114952.266001916@kernel.org
The [re]arm callbacks will return true when the timer was queued and false
if it was already expired at enqueue time.
In both cases the call sites can trivially queue the signal right there,
when the timer was already expired. That avoids a full round trip through
the hrtimer interrupt.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260408114952.198028466@kernel.org
In order to catch expiry times which are already in the past the
timer_arm() and timer_rearm() callbacks need to be able to report back to
the caller whether the timer has been queued or not.
Change the function signature and let all implementations return true for
now. While at it simplify posix_cpu_timer_rearm().
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260408114952.130222296@kernel.org
Most hrtimer sleepers are user controlled and user space can hand arbitrary
expiry values in as long as they are valid timespecs. If the expiry value
is in the past then this requires a full loop through reprogramming the
clock event device, taking the hrtimer interrupt, waking the task and
reprogram again.
Use hrtimer_start_expires_user() which avoids the full round trip by
checking the timer for expiry on enqueue.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260408114952.062400833@kernel.org
Calvin reported an odd NMI watchdog lockup which claims that the CPU locked
up in user space. He provided a reproducer, which set's up a timerfd based
timer and then rearms it in a loop with an absolute expiry time of 1ns.
As the expiry time is in the past, the timer ends up as the first expiring
timer in the per CPU hrtimer base and the clockevent device is programmed
with the minimum delta value. If the machine is fast enough, this ends up
in a endless loop of programming the delta value to the minimum value
defined by the clock event device, before the timer interrupt can fire,
which starves the interrupt and consequently triggers the lockup detector
because the hrtimer callback of the lockup mechanism is never invoked.
The clockevents code already has a last resort mechanism to prevent that,
but it's sensible to catch such issues before trying to reprogram the clock
event device.
Provide a variant of hrtimer_start_range_ns(), which sanity checks the
timer after queueing it. It does not so before because the timer might be
armed and therefore needs to be dequeued. also we optimize for the latest
possible point to check, so that the clock event prevention is avoided as
much as possible.
If the timer is already expired _before_ the clock event is reprogrammed,
remove the timer from the queue and signal to the caller that the operation
failed by returning false.
That allows the caller to take immediate action without going through the
loops and hoops of the hrtimer interrupt.
The queueing code can't invoke the timer callback as the caller might hold
a lock which is taken in the callback.
Add a tracepoint which allows to analyze the expired at start situation.
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260408114951.995031895@kernel.org
If time slice extensions have been disabled on the kernel command line,
then advertising them in RSEQ flags is wrong.
Adjust the conditionals to reflect reality, fixup the misleading comments
about the gap of these flags and the rseq::flags field.
Fixes: d6200245c7 ("rseq: Allow registering RSEQ with slice extension")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.437059375%40kernel.org
Cc: stable@vger.kernel.org
The RSEQ rework changed that to RSEQ_CPU_UNINITILIZED, which is obviously
incompatible. Revert back to the original behavior.
Fixes: 0f085b4188 ("rseq: Provide and use rseq_set_ids()")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.271566313%40kernel.org
Cc: stable@vger.kernel.org
The rseq selftests include two runner scripts run_param_test.sh and
run_syscall_errors_test.sh which set up the environment for test binaries
and run them with various parameters. Currently we list these test binaries
in TEST_GEN_PROGS but this results in the kselftest framework running them
directly as well as via the runners, resulting in duplication and spurious
failures when the environment is not correctly set up (eg, if glibc tries
to use rseq).
Move the binaries the runners invoke to TEST_GEN_PROGS_EXTENDED, binaries
listed there are built but not run by the framework. The param_test
benchmarks are not moved since they are not run by run_param_test.sh.
Fixes: 830969e782 ("selftests/rseq: Implement time slice extension test")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260423-selftests-rseq-use-runner-v1-1-e13a133754c1@kernel.org
Cc: stable@vger.kernel.org
