VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
Fixes: b6d1a06320 ("drm/amdgpu: add VCN_5_0_0 IP block support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
Fixes: 547aad32ed ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
Fixes: b889ef4ac9 ("drm/amdgpu/vcn: add vcn support for VCN4_0_3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
Fixes: 8da1170a16 ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
Fixes: cf14826cdf ("drm/amdgpu: add VCN3.0 support for Sienna_Cichlid")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
Fixes: 28c17d7207 ("drm/amdgpu: add VCN2.5 basic supports")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Early variants need an override.
Fixes: 57d00816c6 ("drm/amdgpu: set family for GC 11.5.4")
Cc: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
Fixes: 1b61de45df ("drm/amdgpu: add initial VCN2.0 support (v2)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yinjie Yao <yinjie.yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So device init ram_is_direct_mapped is available when gmc_funcs are selected
during IP early init.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If only one level is enabled in clock table, there is no need to
follow the fine grained clock logic which expects a minimum of
two levels (min/max).
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-Fix root clock disabled when DSC power gate disabled for DCN314
-Enable/Disable some power gating
-Remove Mall, SubVP and MCLK from DCN42
-Unify fast update classification paths
-Fix narrowing boundaries in dml
-Update MCIF_ADDR macro to address IGT DWB regression
-Fix dual cursor shows on extend desktop
-Fix hubp tmz field define mismatch
Acked-by: Alex Hung <Alex.Hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Modify some IPS related commands.
Acked-by: Alex Hung <Alex.Hung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When set debug.disable_dsc_power_gate = true, the original code
uses an early return to skip the power gate sequence and root
clock enable and disable.
For this case, install new driver without uninstall old driver.
The sequence like below:
1. On the power-off path, the old driver will power gate dsc and
disable_dsc() (root clock disable) due to
debug.disable_dsc_power_gate = false.
2. On the power-on path, the new driver will force power on dsc but skip
enable_dsc() (root clock enable) due to
debug.disable_dsc_power_gate = true.
Finally, when mode needs DSC but the root clock is disabled, underflow
happened.
[How]
- Moving enable_dsc() before the disable_dsc_power_gate check so the
root clock is always enabled on the power-on path.
- Replacing the early return with a goto that skips only the power gate
register writes, allowing disable_dsc() to still execute on the
power-off path.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Disable HPO power gate temporarily to
work around some DP 2 LL compliance failures on DCN42.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Remove MALL, SubVP and MCLK features from DCN42 resource file since it is
an APU and does not support them.
Assisted-by: Claude:opus-4.6
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dc_fast_update intermediate struct created code duplication and
complexity with multiple classification paths (populate_fast_updates,
fast_nonaddr_updates_exist, full_update_required). This refactoring
simplifies the update classification system by consolidating to a
single path while maintaining compatibility and adding comprehensive
test coverage for fast sequence functionality.
[How]
Remove entire dc_fast_update struct and associated helper functions:
- populate_fast_updates
- fast_nonaddr_updates_exist
- full_update_required
and
- Refactor check_update_surfaces_for_stream as the
single classification path with explicit handling for func_shaper,
lut3d_func, cursor_csc_color_matrix_change and
scaler_sharpener_update.
- Add reserved bitfields to surface_update_flags and
stream_update_flags unions for completeness guards.
- Extract dc_check_address_only_update and
dc_check_update_surfaces_for_stream as public.
- Add comprehensive test coverage with parameterized tests for all
FAST flags, update classification tests for MED/FULL paths,
and completeness guard tests.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML code paths include implicit integer narrowing at protocol and
storage boundaries. Making these boundaries explicit improves clarity
and reduces warning noise while preserving behavior.
[How]
Apply explicit C-style casts at intentional narrowing boundaries
across DML calculation, mode support, RQ/DLG, wrapper, and DSC
helper paths.
Keep intermediate arithmetic in natural-width types where practical,
with minor type-consistency cleanups where needed. Add explicit
boundary casts for intentional narrowing and keep intermediate math
in wider types where practical, with small type-consistency cleanups
to maintain behavior and readability.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD CRIU restore flow restores previously saved object IDs from
userspace.
For event restore:
kfd_criu_restore_event()
-> create_signal_event() / create_other_event()
-> allocate_event_notification_slot()
-> idr_alloc(..., *restore_id, *restore_id + 1, ...)
For BO restore:
criu_restore_memory_of_gpu()
-> idr_alloc(..., bo_priv->idr_handle, ...)
In both cases, the restored ID comes from userspace-provided CRIU data.
idr_alloc() expects the ID range values to fit within signed int
limits. If a restored ID is larger than INT_MAX, it can trigger a WARN
in the IDR layer.
A kernel WARN is undesirable because it prints a warning trace and may
cause a panic or reboot on systems with panic_on_warn enabled.
Smatch reported these paths as allowing unchecked userspace values to
reach idr_alloc().
Add INT_MAX validation before using restored IDs in:
- kfd_criu_restore_event()
- criu_restore_memory_of_gpu()
If the restored ID is invalid, return -EINVAL.
This prevents invalid restore data from reaching the IDR layer and
avoids WARN-triggering paths, while keeping valid restore behavior
unchanged.
Fixes: 40e8a766a7 ("drm/amdkfd: CRIU checkpoint and restore events")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: David Yat Sin <david.yatsin@amd.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move more code into a common userq function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The read_indexed_register helper is duplicated across multiple files
with identical logic.
Move it to amdgpu_reg_access.c as
amdgpu_read_indexed_register and update all users accordingly.
No functional changes intended.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gabriel Almeida <gabrielsousa230@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The program_aspm helper is duplicated across multiple files with
identical logic.
Move it to amdgpu_nbio.c as amdgpu_nbio_program_aspm and update
all users accordingly.
Signed-off-by: Gabriel Almeida <gabrielsousa230@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable driver power gating on DCN42 for HUBP OPTC
and DPP HW blocks.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
init_annotated_branch_stats() and all_annotated_branch_stats() check the
return value of register_stat_tracer() with "if (!ret)", but
register_stat_tracer() returns 0 on success and a negative errno on
failure. The inverted check causes the warning to be printed on every
successful registration, e.g.:
Warning: could not register annotated branches stats
while leaving real failures silent. The initcall also returned a
hard-coded 1 instead of the actual error.
Invert the check and propagate ret so that the warning fires on real
errors and the initcall reports the correct status.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://patch.msgid.link/20260420-tracing-v1-1-d8f4cd0d6af1@debian.org
Fixes: 002bb86d8d ("tracing/ftrace: separate events tracing and stats tracing engine")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Export `acpi_of_match_device` function and use it to match the of device
table against ACPI PRP0001 in Rust.
This fixes id_info being None on ACPI PRP0001 devices.
Using `device_get_match_data` is not possible, because Rust stores an
index in the of device id instead of a data pointer. This was done this
way to provide a convenient and obvious API for drivers, which can be
evaluated in const context without the use of any unstable language
features.
Fixes: 7a718a1f26 ("rust: driver: implement `Adapter`")
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> # ACPI
Link: https://patch.msgid.link/20260427-rust_acpi_prp0001-v6-1-6119b2a66183@posteo.de
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
[Why]
A previous warning-fix commit updated type casts in the DCN3
mmhubbub code but missed updating the MCIF_ADDR macro to the
correct, fully parenthesized and casted version. This caused
a regression during DWB tests, where address values could be
misinterpreted, potentially leading to incorrect hardware
programming.
[How]
Updated the MCIF_ADDR macro in dcn30_mmhubbub.c to use the
proper parenthesization and type casting, ensuring correct
address handling. Removed redundant casts from REG_UPDATE
calls for improved clarity and consistency with current
coding standards.
Fixes: f4cdbb5d54 ("drm/amd/display: Fix implicit narrowing conversion warnings")
Reviewed-by: Clayton King <clayton.king@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
when dpp pipe power gating disabled in driver, disable_pipe
did not disable cursor so next time as long as this pipe
powers up, it will be visible.
port dcn314 logic: disable cursor when it should be pipe pg.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
to make hubp surface_flip_registers field define mismatch
with dc_plane_address
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Enable driver power gating. Temporarily disable DIO power gating.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There were places where nothing would get started if a message
allocation failed, so the driver needs to return to normal state.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
The driver would just fetch events and receive messages until the
BMC said it was done. To avoid issues with BMCs that never say they are
done, add a limit of 10 fetches at a time.
In addition, an si interface has an attn state it can return from the
hardware which is supposed to cause a flag fetch to see if the driver
needs to fetch events or message or a few other things. If the attn
bit gets stuck, it's a similar problem. So allow messages in between
flag fetches so the driver itself doesn't get stuck.
This is a more general fix than the previous fix for the specific bad
BMC, but should fix the more general issue of a BMC that won't stop
saying it has data.
This has been there from the beginning of the driver. It's not a bug
per-se, but it is accounting for bugs in BMCs.
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Closes: https://lore.kernel.org/lkml/20260415115930.3428942-1-matt@readmodwrite.com/
Fixes: <1da177e4c3> ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <corey@minyard.net>
The merge-commit 02e778f123 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of
https://gitlab.freedesktop.org/agd5f/linux into drm-next") removes the stub
for drm_fb_helper_gem_is_fb(), so the buld gets broken if DRM_FBDEV_EMULATION
is not set.
‘drm_fb_helper_gem_is_fb’; did you mean ‘drm_fb_helper_from_client’? [-Wimplicit-function-declaration]
1777 | if (!drm_fb_helper_gem_is_fb(dev->fb_helper, fb->obj[0])) {
| ^~~~~~~~~~~~~~~~~~~~~~~
| drm_fb_helper_from_client
Restore it.
Fixes: 02e778f123 ("Merge tag 'amd-drm-next-7.1-2026-03-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
scx_flush_disable_work() calls irq_work_sync() followed by
kthread_flush_work() to ensure that the disable kthread work has
fully completed before bpf_scx_unreg() frees the SCX scheduler.
However, a concurrent scx_vexit() (e.g., triggered by a watchdog stall)
creates a race window between scx_claim_exit() and irq_work_queue():
CPU A (scx_vexit (watchdog)) CPU B (bpf_scx_unreg)
---- ----
scx_claim_exit()
atomic_try_cmpxchg(NONE->kind)
stack_trace_save()
vscnprintf()
scx_disable()
scx_claim_exit() -> FAIL
scx_flush_disable_work()
irq_work_sync() // no-op: not queued yet
kthread_flush_work() // no-op: not queued yet
kobject_put(&sch->kobj) -> free %sch
irq_work_queue() -> UAF on %sch
scx_disable_irq_workfn()
kthread_queue_work() -> UAF
The root cause is that CPU B's scx_flush_disable_work() returns after
syncing an irq_work that has not yet been queued, while CPU A is still
executing the code between scx_claim_exit() and irq_work_queue().
Loop until exit_kind reaches SCX_EXIT_DONE or SCX_EXIT_NONE, draining
disable_irq_work and disable_work in each pass. This ensures that any
work queued after the previous check is caught, while also correctly
handling cases where no disable was triggered (e.g., the
scx_sub_enable_workfn() abort path).
Fixes: 510a270554 ("sched_ext: sync disable_irq_work in bpf_scx_unreg()")
Reported-by: https://sashiko.dev/#/patchset/20260424100221.32407-1-icheng%40nvidia.com
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move <linux/btf_ids.h> from ext.c and "ext_idle.h" from ext.c (plus its
self-include in ext_idle.c) into build_policy.c. Subsequent patches add
their headers the same way for consistency.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The previous fix for adding the devm_kasprintf() return check in the
commit bd07f75120 ("HID: uclogic: Add NULL check in
uclogic_input_configured()") changed the condition of hi->input->name
assignment, and it resulted in missing the proper input device name
when no custom suffix is defined.
Restore the conditional to the original content to address the
regression.
Fixes: bd07f75120 ("HID: uclogic: Add NULL check in uclogic_input_configured()")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
If we have a partial read that is supposed to be treated as failure but
in this code we forgot to set the error code. Return -EINVAL.
Fixes: 9d8d51735a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The controller MCU does not persist OS_TYPE across power cycles. During
s2idle resume, the USB device may be power-cycled, causing the OS_TYPE
setting to revert to the default Windows value.
Add a reset_resume callback so that this is correctly restored after
resume.
Fixes: a23f3497bf ("HID: hid-lenovo-go-s: Add Lenovo Legion Go S Series HID Driver")
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Elan SB974D touchpad uses ELAN_MT_I2C format to send HID reports. Add an
entry to match for the device and parse its vendor specific format.
Signed-off-by: Damien Dejean <damiendejean@google.com>
Signed-off-by: Kornel Dulęba <korneld@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There are several edge cases (see linked thread) where an IMMED task
can be left lingering on a local DSQ if an RT task swoops in at the
wrong time. All of these edge cases are due to rq->next_class being idle
even after dispatching a task to rq's local DSQ. We should bump
rq->next_class to &ext_sched_class as soon as we've inserted a task into
the local DSQ.
To optimize the common case of rq->next_class == &ext_sched_class,
only call wakeup_preempt() if rq->next_class is below EXT. If next_class
is EXT or above, wakeup_preempt() is a no-op anyway.
This lets us also simplify the preempt_curr() logic a bit since
wakeup_preempt() will call preempt_curr() for us if next_class is
below EXT.
Link: https://lore.kernel.org/all/DHZPHUFXB4N3.2RY28MUEWBNYK@google.com/
Signed-off-by: Kuba Piecuch <jpiecuch@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit adds the missing size validation for Rock Band 3 PS3 Pro
instruments in sony_raw_event(), this prevents a malicious device from
allowing hid-sony to read out of bounds of the provided buffer.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit adds the missing size validation for SMK-Link remotes in
sony_raw_event(), this prevents a malicious device from allowing
hid-sony to read out of bounds of the provided buffer.
I do not own these devices so the size check only forces that the buffer
is large enough for nsg_mrxu_parse_report().
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit removes the unneeded WARN_ON() macro usage in
sony_leds_init(), this is unneeded because the sony_leds_init() function
call is already gated behind a SONY_LED_SUPPORT check in
sony_input_configured()
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add two checks to ft260_raw_event() to prevent out-of-bounds reads
from malicious or malfunctioning devices:
First, reject reports shorter than the 2-byte header (report ID +
length fields). Without this, even accessing xfer->length on a
1-byte report is an OOB read.
Second, validate xfer->length against the actual data capacity of
the received HID report. Each I2C data report ID (0xD0 through
0xDE) defines a different report size in the HID descriptor, so the
available payload varies per report. A corrupted length field could
cause memcpy to read beyond the report buffer.
Reported-by: Sebastián Josué Alba Vives <sebasjosue84@gmail.com>
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit fixes the incorrect force-feedback check in sony_suspend(),
without this the check will always be true due to checking a constant
define that is never 0.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
devm_alloc_workqueue() built a va_list and passed it as a single
positional argument to the variadic alloc_workqueue() macro:
va_start(args, max_active);
wq = alloc_workqueue(fmt, flags, max_active, args);
va_end(args);
C does not allow forwarding a va_list through a ... parameter.
alloc_workqueue() expands to alloc_workqueue_noprof(), which runs
its own va_start() over its ... params, so the inner
vsnprintf(wq->name, sizeof(wq->name), fmt, args) in
__alloc_workqueue() received the outer va_list object as the first
variadic slot rather than the caller's actual format arguments.
Add a new static helper alloc_workqueue_va() that wraps
__alloc_workqueue() and runs wq_init_lockdep() on success, and
fold both alloc_workqueue_noprof() and devm_alloc_workqueue_noprof()
onto it as suggested by Tejun.
The wq_init_lockdep() step is required on the devm path
too, otherwise __flush_workqueue()'s on-stack
COMPLETION_INITIALIZER_ONSTACK_MAP would NULL-deref wq->lockdep_map.
No caller changes are required. devm_alloc_ordered_workqueue() is
a macro forwarding to devm_alloc_workqueue() and inherits the fix.
Two in-tree callers actively trigger the broken path on every probe:
drivers/power/supply/mt6370-charger.c:889
drivers/power/supply/max77705_charger.c:649
both of which use devm_alloc_ordered_workqueue(dev, "%s", 0,
dev_name(dev)).
A standalone reproducer module is available at[1].
Link: https://github.com/leitao/debug/blob/main/workqueue/valist/wq_va_test.c [1]
Fixes: 1dfc9d60a6 ("workqueue: devres: Add device-managed allocate workqueue")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove an unneeded goto statement in hotkey_kthread(). Since
the function has a single exit location with no cleanup code,
the jump provides no benefit. Per the kernel coding style,
returning directly is preferred over goto in such case [1].
[1] https://www.kernel.org/doc/html/latest/process/coding-style.html
Signed-off-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Tested-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260425063936.9360-1-eduardo@eduardovasconcelos.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The lpc_ich MFD driver now exposes the software node associated with the
its GPIO controller cell. Remove the dummy software node from the
meraki-mx100 driver and reference the real one instead.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-meraki-swnodes-v5-1-ad91cd306472@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
strcpy() has been deprecated¹ because it performs no bounds checking on
the destination buffer, which can lead to buffer overflows. While the
current code works correctly, replace strcpy() with the safer strscpy()
to follow secure coding best practices.
¹ https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260424075755.305770-3-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
