We need to pass a lot of information between the display driver
and the core driver to get framebuffers mapped into GGTT/DPT
correctly. Rather than passing around a swarm of integers and
boolean as function arguments, let's collect it all into a
structure (struct intel_fb_pin_params).
Start by moving the gtt view, alignment, phys_alignment,
and vtd_guard there. Going forward additional things need
to added as well (mainly various boolean flags).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260416174448.28264-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use the proper gtt view from the plane state rather than always
assuming that it came directly from the FB. This is in the DPT
codepath so the view should currently always come from the FB,
but in the future we may also want per-plane remapping with DPT.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260416174448.28264-2-ville.syrjala@linux.intel.com
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com
Fixes: 152a333a58 ("staging: erofs: add compacted compression indexes support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
On 32-bit platforms, pgoff_t is 32 bits wide, so left-shifting
large arbitrary pgoff_t values by PAGE_SHIFT performs 32-bit arithmetic
and silently truncates the result for pages beyond the 4 GiB boundary.
Cast the page index to loff_t before shifting to produce a correct
64-bit byte offset.
Fixes: 386292919c ("erofs: introduce readmore decompression strategy")
Fixes: 307210c262 ("erofs: verify metadata accesses for file-backed mounts")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Currently we already have boundary-checks for nameoffs, but the trailing
dirents are special since the namelens are calculated with strnlen()
with unchecked nameoffs.
If a crafted EROFS has a trailing dirent with nameoff >= maxsize,
maxsize - nameoff can underflow, causing strnlen() to read past the
directory block.
nameoff0 should also be verified to be a multiple of
`sizeof(struct erofs_dirent)` as well [1].
[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com
Fixes: 3aa8ec716e ("staging: erofs: add directory operations")
Fixes: 33bac91284 ("staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Closes: https://lore.kernel.org/r/A0FD7E0F-7558-49B0-8BC8-EB1ECDB2479A@outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
slhc_uncompress() parses a VJ-compressed TCP header by advancing a
pointer through the packet via decode() and pull16(). Neither helper
bounds-checks against isize, and decode() masks its return with
& 0xffff so it can never return the -1 that callers test for -- those
error paths are dead code.
A short compressed frame whose change byte requests optional fields
lets decode() read past the end of the packet. The over-read bytes
are folded into the cached cstate and reflected into subsequent
reconstructed packets.
Make decode() and pull16() take the packet end pointer and return -1
when exhausted. Add a bounds check before the TCP-checksum read.
The existing == -1 tests now do what they were always meant to.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20260414134126.758795-2-horms@kernel.org/
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416100147.531855-5-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The POD HD PRO is the rackmount version of the POD 500, with most of the
same behaviors. As with some of the other rackmount POD devices it will
not send captured audio to the host unless the host is sending playback
audio, so it has LINE6_CAP_IN_NEEDS_OUT in addition to the POD 500
flags.
Tested-By: Phil Willoughby <willerz@gmail.com>
Signed-off-by: Phil Willoughby <willerz@gmail.com>
Link: https://patch.msgid.link/20260420152405.7230-1-willerz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
slhc_init() accepts rslots == 0 as a valid configuration, with the
documented meaning of 'no receive compression'. In that case the
allocation loop in slhc_init() is skipped, so comp->rstate stays
NULL and comp->rslot_limit stays 0 (from the kzalloc of struct
slcompress).
The receive helpers do not defend against that configuration.
slhc_uncompress() dereferences comp->rstate[x] when the VJ header
carries an explicit connection ID, and slhc_remember() later assigns
cs = &comp->rstate[...] after only comparing the packet's slot number
to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the
range check, and the code dereferences a NULL rstate.
The configuration is reachable in-tree through PPP. PPPIOCSMAXCID
stores its argument in a signed int, and (val >> 16) uses arithmetic
shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1
is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because
/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path
is reachable from an unprivileged user namespace. Once the malformed
VJ state is installed, any inbound VJ-compressed or VJ-uncompressed
frame that selects slot 0 crashes the kernel in softirq context:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519)
Call Trace:
<TASK>
ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466)
ppp_input (drivers/net/ppp/ppp_generic.c:2359)
ppp_async_process (drivers/net/ppp/ppp_async.c:492)
tasklet_action_common (kernel/softirq.c:926)
handle_softirqs (kernel/softirq.c:623)
run_ksoftirqd (kernel/softirq.c:1055)
smpboot_thread_fn (kernel/smpboot.c:160)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
</TASK>
Reject the receive side on such instances instead of touching rstate.
slhc_uncompress() falls through to its existing 'bad' label, which
bumps sls_i_error and enters the toss state. slhc_remember() mirrors
that with an explicit sls_i_error increment followed by slhc_toss();
the sls_i_runt counter is not used here because a missing rstate is
an internal configuration state, not a runt packet.
The transmit path is unaffected: the only in-tree caller that picks
rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and
slip.c always calls slhc_init(16, 16), so comp->tstate remains valid
and slhc_compress() continues to work.
Fixes: 4ab42d78e3 ("ppp, slip: Validate VJ compression slot parameters completely")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260415204130.258866-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Inserts past 75% load call schedule_work(&ht->run_work) to kick an
async resize. If a caller holds a raw spinlock (e.g. an
insecure_elasticity user), schedule_work() under that lock records
caller_lock -> pool->lock -> pi_lock -> rq->__lock
A cycle forms if any of these locks is acquired in the reverse
direction elsewhere. sched_ext, the only current insecure_elasticity
user, hits this: it holds scx_sched_lock across rhashtable inserts of
sub-schedulers, while scx_bypass() takes rq->__lock -> scx_sched_lock.
Exercising the resize path produces:
Chain exists of:
&pool->lock --> &rq->__lock --> scx_sched_lock
Bounce the kick from the insert paths through irq_work so
schedule_work() runs from hard IRQ context with the caller's lock no
longer held. rht_deferred_worker()'s self-rearm on error stays on
schedule_work(&ht->run_work) - the worker runs in process context with
no caller lock held, and keeping the self-requeue on @run_work lets
cancel_work_sync() in rhashtable_free_and_destroy() drain it.
v3: Keep rht_deferred_worker()'s self-rearm on schedule_work(&run_work).
Routing it through irq_work in v2 broke cancel_work_sync()'s
self-requeue handling - an irq_work queued after irq_work_sync()
returned but while cancel_work_sync() was still waiting could fire
post-teardown.
v2: Bounce unconditionally instead of gating on insecure_elasticity,
as suggested by Herbert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
The nr_cpus variable is defined in scx_cpu0.bpf.c but never used in
the BPF logic. Remove both in BPF and userspace side.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In prep_ata_v3_hw(), add cpu_to_le32() to fix warning:
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:1448:26: sparse: sparse: invalid assignment: |=
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:1448:26: sparse: left side has type restricted __le32
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:1448:26: sparse: right side has type unsigned int
Fixes: 8aa580cd92 ("scsi: hisi_sas: Enable force phy when SATA disk directly connected")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604191850.IVYPTaML-lkp@intel.com/
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://patch.msgid.link/20260420021044.3339459-1-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ALUA handler maps a 0 value (no implicit transition timeout provided
by the target) to the ALUA_FAILOVER_TIMEOUT constant, currently 60
seconds. This means the kernel already does not accept an infinite
transition time.
However, 60 seconds is insufficient for some arrays that may take longer
to complete ALUA transitions. Since the highest value allowed by the
SCSI specification for the implicit transition timeout is a single byte
(255 seconds), change the default to 255. This way, when a target does
not provide an explicit transition timeout, we default to the maximum
value the spec allows rather than an arbitrary 60 second limit.
Co-developed-by: Krishna Kant <krishna.kant@purestorage.com>
Signed-off-by: Krishna Kant <krishna.kant@purestorage.com>
Co-developed-by: Riya Savla <rsavla@purestorage.com>
Signed-off-by: Riya Savla <rsavla@purestorage.com>
Signed-off-by: Brian Bunker <brian@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20260416165512.26497-2-brian@purestorage.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On systems with multiple controllers debug kernel shows
WARNING: possible recursive locking detected
during shutdown.
Each controller does have its own ctrl_info (and mutex) and that isn't
correctly recognized by debug kernel. Suppress the warning by releasing
the mutex at the end of pqi_shutdown().
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260414124118.23661-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sg_start_req() is called from normal user context and can sleep when
waiting for memory. Switch it to use GFP_KERNEL, which fixes allocation
failures seen with the bio_alloc rework.
Fixes: b520c4eef8 ("block: split bio_alloc_bioset more clearly into a fast and slowpath")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260415060813.807659-2-hch@lst.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
submit_one_async_extent() calls btrfs_reserve_extent(), which decrements
bytes_may_use. If the call btrfs_create_io_em() fails, we jump to
out_free_reserve, which calls extent_clear_unlock_delalloc().
Because we're specifying EXTENT_DO_ACCOUNTING, i.e.
EXTENT_CLEAR_META_RESV | EXTENT_CLEAR_DATA_RESV, this decreases
bytes_may_use again. This can lead to problems later on, as an initial
write can fail only for the writeback to silently ENOSPC.
Fix this by replacing EXTENT_DO_ACCOUNTING with EXTENT_CLEAR_META_RESV.
This parallels a4fe134fc1 ("btrfs: fix a double release on reserved
extents in cow_one_range()"), which is the same fix in cow_one_range().
Fixes: 151a41bc46 ("Btrfs: fix what bits we clear when erroring out from delalloc")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_partially_delete_raid_extent() returns an error code (e.g.
-ENOMEM from kzalloc(), or errors from btrfs_del_item/btrfs_insert_item()),
but all three call sites in btrfs_delete_raid_extent() discard the
return value, silently losing errors and potentially leaving the stripe
tree in an inconsistent state.
Fix by capturing the return value into ret at all three call sites and
breaking out of the loop on error where appropriate.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the 'punch a hole' case of btrfs_delete_raid_extent(),
btrfs_duplicate_item() can return -EAGAIN when the leaf needs to be
split and the path becomes invalid. The old code treats any error as
fatal and breaks out of the loop.
Additionally, btrfs_duplicate_item() may trigger setup_leaf_for_split()
which can reallocate the leaf node. The code continues using the old
leaf pointer, leading to use-after-free or stale data access.
Fix both issues by:
- Handling -EAGAIN specifically: release the path and retry the loop.
- Refreshing leaf = path->nodes[0] after successful duplication.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After falling back to the previous item in btrfs_delete_raid_extent(),
the code uses ASSERT(found_start <= start) to verify the found extent
actually precedes our target range. If the B-tree state is unexpected
(e.g. no overlapping extent exists), this triggers a kernel BUG/panic
in debug builds, or silently continues with wrong data otherwise.
Replace the ASSERT with a proper bounds check that returns -ENOENT if
the found extent does not actually overlap with the start position.
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When found_start > start and slot == 0, btrfs_previous_item() is called
with min_objectid=start to find the previous stripe extent. However, the
previous stripe extent we are looking for has objectid < start (it starts
before our deletion range), so passing start as min_objectid prevents
finding it.
Fix by passing 0 as min_objectid to allow finding any preceding stripe
extent regardless of its objectid.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_delete_raid_extent(), the search key uses offset=0. When the
target stripe entry is the first item on a leaf, btrfs_search_slot()
may land on the previous leaf and decrementing the slot from nritems
still points to the wrong entry, causing the stripe extent to be
silently missed.
Fix this by searching with offset=(u64)-1 instead. Since no real stripe
entry has this offset, btrfs_search_slot() always returns 1 with the
slot pointing past the last matching objectid entry. Then unconditionally
decrement the slot with a proper slots[0]==0 early-exit check to handle
the case where no matching entry exists.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_partially_delete_raid_extent() rebuilds a truncated/shifted
stripe extent into newitem, the loop copies the physical address for
each stride but forgets to copy the devid. The resulting item written
back to the stripe tree has zeroed-out devids, corrupting the stripe
mapping.
Fix this by reading the devid with btrfs_raid_stride_devid() and
writing it into the new item with btrfs_set_stack_raid_stride_devid()
before copying the physical address.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace the conditional assertions with proper error handling and
transaction abort if we find an unexpected key type in the free space
tree.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In add_remap_tree_entries(), we only process a certain number of entries
at a time, meaning we may need to loop.
But because we weren't checking the return value of btrfs_insert_empty_items()
within the loop, this meant that if the last iteration of the loop
succeeded but a previous iteration failed, we were erroneously returning
0.
Fix this by breaking the loop early if btrfs_insert_empty_items() fails.
Fixes: b56f35560b ("btrfs: handle setting up relocation of block group with remap-tree")
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although commit 304076527c ("btrfs: move shutdown and remove_bdev
callbacks out of experimental features") tries to move both shutdown and
remove_bdev out of experimental features, that commit has only addressed
the super block operation callback, the ioctl one is left untouched.
Fix that missing aspect by also moving shutdown ioctl out of
experimental features.
Since we're here, also add unknown flag detection to reject any
unsupported shutdown flags.
Fixes: 304076527c ("btrfs: move shutdown and remove_bdev callbacks out of experimental features")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently for tree block readahead we never pass a
btrfs_tree_parent_check with @has_first_key set.
Without @has_first_key set, btrfs will skip the following extra
checks:
- Header generation check
This is a minor one.
- Empty leaf/node checks
This is more serious, for certain trees like the csum tree, they are
allowed to be empty, thus an empty leaf can pass the tree checker.
But if there is a parent node for such an empty leaf, it indicates
corruption.
Without @has_first_key set, we can no longer detect such a problem.
In fact there is already a fuzzed image report that a corrupted csum
leaf which has zero nritems but still has a parent node can trigger
a BUG_ON() during csum deletion.
However there are only two call sites of btrfs_readahead_tree_block():
- Inside relocate_tree_blocks()
At this call site we are trying to grab the first key of the tree
block, thus we are not able to pass a @first_key parameter.
- Inside btrfs_readahead_node_child()
This is the more common call site, where we have the parent node and
want to readahead the child tree blocks.
In this case we can easily grab the node key and pass it for checks.
Add a new parameter @first_key to btrfs_readahead_tree_block() and pass
the node key to it inside btrfs_readahead_node_child().
This should plug the gap in empty leaf detection during readahead.
Link: https://lore.kernel.org/linux-btrfs/20260409071255.3358044-1-gality369@gmail.com/
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If one of the calls made by do_remap_reloc_trans() fails, we can leave
the remap tree in an inconsistent state. Abort the transaction if this
happens, to prevent the corrupt state from reaching the disk.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_reserve_extent() in do_remap_reloc_trans() returns
a smaller extent than we asked for, currently we're not undoing the
bytes_may_use change that we made. Fix this by calling
btrfs_space_info_update_bytes_may_use() again for the difference.
Fixes: fd6594b144 ("btrfs: replace identity remaps with actual remaps when doing relocations")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_reserve_extent() in move_existing_remap() returns a
smaller extent than we asked for, currently we're not undoing the
bytes_may_use change that we made. Fix this by calling
btrfs_space_info_update_bytes_may_use() again for the difference.
Fixes: bbea42dfb9 ("btrfs: move existing remaps before relocating block group")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extend lib/test_bpf.c to provide comprehensive test coverage for BPF
signed division (SDIV) and signed modulo (SMOD) instructions, both
32-bit and 64-bit variants with immediate operands.
Introduce F_ALU32 and F_SIGNED flags to replace the less readable
bool alu32 and s16 off parameters throughout the test helpers. The
BPF instruction 'off' field is derived from flags only at the point
of instruction encoding.
Changes:
- Add enum { F_ALU32 = 1, F_SIGNED = 2 } for readable test flags.
- __bpf_alu_result(): take u32 flags instead of separate signed/alu32
parameters. Narrows operands internally for ALU32 (unsigned via u32
cast, signed via s32 cast) before computing the reference result.
- __bpf_emit_alu64_imm(), __bpf_emit_alu32_imm(): pass flags through
to __bpf_alu_result, derive 'off' for instruction encoding locally.
- __bpf_fill_alu_imm_regs(): take u32 flags, use F_ALU32/F_SIGNED for
operand setup and single-line __bpf_alu_result() call.
- __bpf_fill_alu_shift(), __bpf_fill_alu_shift_same_reg(): convert
bool alu32 parameter to u32 flags for consistency.
- New test fill functions: bpf_fill_alu{32,64}_{sdiv,smod}_imm() and
bpf_fill_alu{32,64}_{sdiv,smod}_imm_regs(), each testing all
immediate value magnitudes and all register pair combinations.
- All existing unsigned tests updated to use flags (0 or F_ALU32),
preserving backward compatibility.
8 new test cases added:
ALU64_SDIV_K, ALU64_SMOD_K (immediate magnitudes + register combos)
ALU32_SDIV_K, ALU32_SMOD_K (immediate magnitudes + register combos)
Test results:
test_bpf: Summary: 1061 PASSED, 0 FAILED, [1049/1049 JIT'ed]
test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jie Meng <jmeng@fb.com>
Link: https://lore.kernel.org/r/20260413172311.3918767-1-jmeng@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alan Maguire says:
====================
bpf: Extend BTF UAPI vlen, kinds to use unused bits
Currently BTF types can have a maximum of 65535 vlen-specified
objects. While this limit has not yet been surpassed for existing
cases (struct/union fields, enum values, function arguments and
datasec), upcoming BTF location information - specifically inline
sites - will hit that limit. Utilize unused BTF info bits in
struct btf_type to increase limit to 24-bits (over 16 million).
This is more than an order of magnitude greater than inline
site counts for the kernel (~400,000) so should be enough for
the near future at least.
Similarly, struct btf_type uses 5 bits for BTF kind values;
currently we use 20 kinds, but BTF location information will
take another 3, and conceivably providing better support for Rust
types in BTF (now that modules can be built using Rust) could
push us close to the max of 31. Use 2 unused bits to provide
a max possible kind of 127.
Patch 1 handles UAPI and kernel-related changes.
Patch 2 updates libbpf to have btf_vlen() return a __u32 instead
of __u16 and updates consumers in libbpf accordingly. Also adds
bounds checking for max vlen.
Patch 3 cleans up __u16 vlen usage in bpftool.
Patch 4 fixes up a test that relies on BTF info overflowing
maximum kind value; fix up the expected error to be an
invalid kind rather than (now impossible) invalid btf_info.
Patch 5 fixes up __u16 vlen usage in selftests/bpf.
Patch 6 syncs BTF documentation with UAPI changes.
Changes since v2 [1]:
- dropped backwards-compatibility macros (Alexei, patch 1)
- added additional vlen bounds check in btf__add_field()
(sashiko, bpf bot, patch 2)
- dropped sanitization check in libbpf as older kernels will
reject BTF with extended vlen/kinds using BTF info mask
(Alexei)
- fix more vlen assumptions in prog_test/ctx_rewrite.c
(sashiko, patch 5)
Changes since v1 [2]:
- added redundant macros to UAPI in case enum switch for BTF_MAX*
values causes problems (sashiko, patch 1)
- updated feature test to use BTF loading rather than vmlinux BTF
lookup, in line with other BTF feature tests (sashiko, patch 3)
- fixed up a few more kernel, libbpf, bpftool instances of __u16 usage
(bpf bot, sashiko, patches 1, 2, 4)
- fixed up sanitize selftest cleanup (Mykyta, patch 5)
- used unlikely-to-be-used kind (sashiko, patch 6)
- fixed a few lingering selftests uses of __u16 for kind (patch 7)
- update btf.rst with new vlen, kind sizes (patch 8)
[1] https://lore.kernel.org/bpf/20260416143904.1220662-1-alan.maguire@oracle.com/
[2] https://lore.kernel.org/bpf/20260414195019.684531-1-alan.maguire@oracle.com/
====================
Link: https://patch.msgid.link/20260417143023.1551481-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With extended kinds, 32 becomes a valid (but not used)
BTF info kind value; fix up the test to check for the
"Invalid kind" rather than "Invalid btf_info" message.
Since all bits are used in BTF info, it is no longer
possible to craft an invalid BTF info value. Use
127 (new maximum possible kind value).
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-5-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that vlen is 24 bits, btf_vlen() must return a __u32.
Adjust use cases in libbpf accordingly. Also add error
handling to avoid vlen overflow in btf_type_inc_vlen().
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-3-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BTF maximum vlen is encoded using 16 bits with a maximum vlen
of 65535. This has sufficed for structs, function parameters
and enumerated type values. However, with upcoming BTF location
information - in particular information about inline sites -
this limit is surpassed. Use bits 16-23 - currently unused in
BTF info - to extend to 24 bits, giving a max vlen of (2^24 - 1),
or 16 million.
Also extend BTF kind encoding from 5 to 7 bits, giving a maximum
available number of kinds of 128. Since with the BTF location work
we use another 3 kinds, we are fast approaching the current limit
of 32.
Convert BTF_MAX_* values to enums to allow them to be encoded in
kernel BTF; this will allow us to detect if the running kernel
supports a 24-bit vlen or not. Add one for max _possible_
(not used) kind.
Fix up a few places in the kernel where a 16-bit vlen is assumed;
remove BTF_INFO_MASK as now all bits are used.
The vlen expansion was suggested by Andrii in [1]; the kind expansion
is tackled here too as it may be needed also to support new kinds
in BTF.
[1] https://lore.kernel.org/bpf/CAEf4BzZx=X6vGqcA8SPU6D+v6k+TR=ZewebXMuXtpmML058piw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260417143023.1551481-2-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This odd file was added to automatically figure out tool-generated
symbols.
Honestly, it *should* have been just a real honest-to-goodness regular
file in git, instead of having strange code to generate it in the
Makefile, but that is not how that silly thing works. So now we need to
ignore it explicitly.
Fixes: 1211907ac0 ("tracing: Generate undef symbols allowlist for simple_ring_buffer")
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes regressions in non-bash shells and busybox support, and reverts
a commit that regression in build and installation when one or more
tests fail to build. Fixes duplicated test number reporting introduced
in ktap support patch.
- selftests: Fix duplicated test number reporting
- selftests: Fix runner.sh for non-bash shells
- selftests: Fix runner.sh busybox support
- selftests: Deescalate error reporting
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmnmPx8ACgkQCwJExA0N
QxwZ7g/+L4ZZDp3RyuauvCV4zhG5GQFudtvAkcLOSwBVnRbiLdPmdOXXz7IkW7DN
U/WQx3pDOYmvtr2QdNvXch3HOdk1vUfNViU5yPNqC4jVZEMON2N7oGr2Eq+WVhi+
gl63pRYk9ISh+5vOlzQY9UX1sLOxlME1foMJdHQEZHhgbNxlc7s/NfpqAnRC7a4l
SFuzL/PJl9kYiMUFeYLB9kwrelvoLrzItMVz7/m56dgNVuEmbNDESBXGwJQneH6l
SWOXPC96gu2cajluNfyhOqarkuGVD8x6J+2vWBwrDnSiyMLyealAOHnK5JGR17hW
NErJDpqpdlIue5/h/XFnZ+4o43J8uEiUxmP7UiPAmreBllajeNz4xZPuz+i2vLH2
O9dzzj/SV9War5txaFdqHXpbZE2zYOfhA07Xg6VdjcB0LTWaSOPqiIPr9UTwvT6o
T7vYkvE+w4rjXwTFEscHkZ5jXrvAiWMrgiK4BuzXWy03/BvOF6LiMf0NCELvKvZG
ZubLCJ1N/2EXgt+MX9dRmxq+7ZXCGu53TU5GeX1u/vT5lqsaPwoXT4RylZek5hwx
DfKjEOU22TOQXAV01z1sPJvNwPZa84Hejzf6c6v2xobY/vaf4XxgyXAIAJJGOfpj
25nEdecvjdX62kFfY/QrX7akpr7IreonpssmQVuGt3jilpq4uLg=
=1k+f
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix regressions in non-bash shells and busybox support, and revert a
commit that regressed in build and installation when one or more tests
fail to build.
Fix duplicated test number reporting introduced in ktap support patch"
* tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix duplicated test number reporting
selftests: Fix runner.sh for non-bash shells
selftests: Fix runner.sh busybox support
selftests: Deescalate error reporting
Core features:
- Add workaround for C1-Pro erratum 4193714 - early CME (SME unit)
DVMSync acknowledgement. The fix consists of sending IPIs on TLB
maintenance to those CPUs running in user space with SME enabled
- Include kernel-hwcap.h in list of generated files (missed in a recent
commit generating the KERNEL_HWCAP_* macros)
CCA:
- Fix RSI_INCOMPLETE error check in arm-cca-guest
MPAM:
- Fix an unmount->remount problem with the CDP emulation, uninitialised
variable and checker warnings
-----BEGIN PGP SIGNATURE-----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=LNY2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"The main 'feature' is a workaround for C1-Pro erratum 4193714
requiring IPIs during TLB maintenance if a process is running in user
space with SME enabled.
The hardware acknowledges the DVMSync messages before completing
in-flight SME accesses, with security implications. The workaround
makes use of the mm_cpumask() to track the cores that need
interrupting (arm64 hasn't used this mask before).
The rest are fixes for MPAM, CCA and generated header that turned up
during the merging window or shortly before.
Summary:
Core features:
- Add workaround for C1-Pro erratum 4193714 - early CME (SME unit)
DVMSync acknowledgement. The fix consists of sending IPIs on TLB
maintenance to those CPUs running in user space with SME enabled
- Include kernel-hwcap.h in list of generated files (missed in a
recent commit generating the KERNEL_HWCAP_* macros)
CCA:
- Fix RSI_INCOMPLETE error check in arm-cca-guest
MPAM:
- Fix an unmount->remount problem with the CDP emulation,
uninitialised variable and checker warnings"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: resctrl: Make resctrl_mon_ctx_waiters static
arm_mpam: resctrl: Fix the check for no monitor components found
arm_mpam: resctrl: Fix MBA CDP alloc_capable handling on unmount
virt: arm-cca-guest: fix error check for RSI_INCOMPLETE
arm64/hwcap: Include kernel-hwcap.h in list of generated files
arm64: errata: Work around early CME DVMSync acknowledgement
arm64: cputype: Add C1-Pro definitions
arm64: tlb: Pass the corresponding mm to __tlbi_sync_s1ish()
arm64: tlb: Introduce __tlbi_sync_s1ish_{kernel,batch}() for TLB maintenance
- sh: Drop CONFIG_FIRMWARE_EDID from defconfig files
- sh: Remove CONFIG_VSYSCALL reference from UAPI
- sh: Fix typo in SPDX license ID lines
- sh: Include <linux/io.h> in dac.h
-----BEGIN PGP SIGNATURE-----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=jFKW
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two patches from Thomas Zimmermann, one by Tim Bird and one by Thomas
Weißschuh.
The first patch by Thomas Zimmermann adds a missing include in dac.h
for SH-3 which became necessary after 243ce64b2b ("backlight: Do not
include <linux/fb.h> in header file") which made __raw_readb() and
__raw_writeb() inaccessible in dac.h.
Thomas' second patch drops CONFIG_FIRMWARE_EDID for SH as it depends
on X86 or EFI_GENERIC_STUB which are not defined on SH for obvious
reasons.
The patch by Tim Bird fixes just a small typo in two SPDX ID lines
which he stumbled over by accident.
And, least but not last, the patch by Thomas Weißschuh removes the
CONFIG_VSYSCALL reference from UAPI. This was necessary as the
definition of AT_SYSINFO_EHDR was gated between CONFIG_VSYSCALL to
avoid a default gate VMA to be created. However that default gate VMA
was removed entirely in commit a6c19dfe39 (arm64,ia64,ppc,s390,
sh,tile,um,x86,mm: remove default gate area)"
* tag 'sh-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: Drop CONFIG_FIRMWARE_EDID from defconfig files
sh: Remove CONFIG_VSYSCALL reference from UAPI
sh: Fix typo in SPDX license ID lines
sh: Include <linux/io.h> in dac.h
-----BEGIN PGP SIGNATURE-----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=O6QR
-----END PGP SIGNATURE-----
Merge tag 'printk-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Fix printk ring buffer initialization and sanity checks
- Workaround printf kunit test compilation with gcc < 12.1
- Add IPv6 address printf format tests
- Misc code and documentation cleanup
* tag 'printk-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printf: Compile the kunit test with DISABLE_BRANCH_PROFILING DISABLE_BRANCH_PROFILING
lib/vsprintf: use bool for local decode variable
lib/hexdump: print_hex_dump_bytes() calls print_hex_dump_debug()
printk: ringbuffer: fix errors in comments
printk_ringbuffer: Add sanity check for 0-size data
printk_ringbuffer: Fix get_data() size sanity check
printf: add IPv6 address format tests
printk: Fix _DESCS_COUNT type for 64-bit systems
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ]
Fixes: 8161239a8b ("rtmutex: Simplify PI algorithm and make highest prio task get lock")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Replace all variations of "paddr" variables in KVM selftests with "gpa",
with the exception of the ELF structures, as those fields are not specific
to guest virtual addresses, to complete the conversion from vm_paddr_t to
gpa_t.
No functional change intended.
Link: https://patch.msgid.link/20260420212004.3938325-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
