xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables.
Fixes: e1e551bc56 ("xfrm: policy: prepare policy_bydst hash for rcu lookups")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
merge window. They are listed below:
- New driver for Mahua SoC
- New driver for Eliza SoC
- Enable QoS support for QCS8300 and QCS615 SoCs
- Add L3 cache scaling compatibles for SM8550 and Eliza SoCs
- Fix multiple issues in the msm8974 driver
- Fix kfree mismatch
- Misc cleanups
- Add maintainer entry for the interconnect KUnit tests
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEExQ4tCsdmOu34XfMFgNDMCsbYFmMFAmnTnbsACgkQgNDMCsbY
FmOynRAAwd60nzHWU8vJUwWwr5ARjT1Ox75VaNvV7e0kyBc7Ld28s5N2RB5fTR8O
WF8W7fXVanqk4dMEZS2GbJaub1gjTjfnk+VkZMBxXixGq5KJFBqNdrRwTAGF+pxu
Cmo2gBaFrRWMsHgZa7rV26vKT7pSyl8ZCgseX7FQ+molo/ycHImmiv9gJZJ3tj88
GoPpcDV7PHHa9k6B/FO5H7M3eoe596h4g2AqnCD7bW/nZAUkvO5HPAfqdLi6lyRf
ekcHBgLPYghx4EyC8N0WF8KSC2i7gyyl8HmiTGNZhuQbIE8mKpBVeYZVef6ebt8s
UM31wJMnmyDB4JaPfOhzmhjvneX2Vep5hxTO12tx/oiiOFs4k3EOOaw7X/MuNYtR
DKNJF/WWXpJLxj/LZPghx9o1IsXiblJdFQ+eTbDCcoHNUi7kzyJwazAX7Gku8sKK
YmjYQLimaEiw7OkDGa+425t8R5ax0O+FUD650hRHfaNKd/6xe89XnDwu9sFDzlHs
3CGSerb7ustg8rsvRIxwVpXc+ceBILp7mUc93mCT8GbeZwwE4veEIke3qGZARFmX
ExUC7NewHLCslPnw69oFoUUFDNKrULLwv7YoRqLoyJk4V2wTUm08vuCJ1nvsWmfP
RhTLgVv7/xowuSYWtOa4/myq9qZOB+sLlMgcGoiao5MS6KUqpu8=
=RyEu
-----END PGP SIGNATURE-----
Merge tag 'icc-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
This pull request contains the interconnect changes for the 7.1-rc1
merge window. They are listed below:
- New driver for Mahua SoC
- New driver for Eliza SoC
- Enable QoS support for QCS8300 and QCS615 SoCs
- Add L3 cache scaling compatibles for SM8550 and Eliza SoCs
- Fix multiple issues in the msm8974 driver
- Fix kfree mismatch
- Misc cleanups
- Add maintainer entry for the interconnect KUnit tests
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (22 commits)
MAINTAINERS: Add interconnect kunit test entry
interconnect: debugfs: fix devm_kstrdup and kfree mismatch
interconnect: qcom: msm8974: expand DEFINE_QNODE macros
interconnect: qcom: msm8974: switch to the main icc-rpm driver
interconnect: qcom: let platforms declare their bugginess
interconnect: qcom: define OCMEM bus resource
interconnect: qcom: icc-rpm: allow overwriting get_bw callback
interconnect: qcom: drop unused is_on flag
dt-bindings: interconnect: qcom,msm8974: use qcom,rpm-common
dt-bindings: interconnect: qcom,msm8974: drop bus clocks
interconnect: qcom: qcs615: enable QoS configuration
dt-bindings: interconnect: qcom,qcs615-rpmh: add clocks property to enable QoS
interconnect: qcom: Add Eliza interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Eliza SoC
dt-bindings: interconnect: OSM L3: Add Eliza EPSS L3 compatible
interconnect: qcom: De-acronymize SoC names
dt-bindings: interconnect: qcom,glymur-rpmh: De-acronymize SoC name
dt-bindings: interconnect: OSM L3: Document sm8550 OSM L3 compatible
interconnect: qcom: qcs8300: enable QoS configuration
dt-bindings: interconnect: qcom,qcs8300-rpmh: add clocks property to enable QoS
...
Detailed description for this pull request:
- Fix sysfs duplicate filename issue on extcon core
: Adjust ida_free timing after device_unregister
to prevent duplicate filename error when re-allocating id
- Update NXP PTN5150 extcon driver and dt-binding document
: Handle pending IRQ events during system resume
: Allow "connector" node to present in devicetree
: Add Type-C orientation switch support to correctly
set orientation of multiplexer according to CC status
: Support USB role switch via connector fwnode
- Replace use of system_wq with system_percpu_wq on int3496 driver
- Make typec-power-opmode optional on usbc-tusb320 driver
: Prevent probe error when usb-c connector is configured
in the DT without "typec-power-opmode" property
-----BEGIN PGP SIGNATURE-----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=0O4y
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v7.1
Detailed description for this pull request:
- Fix sysfs duplicate filename issue on extcon core
: Adjust ida_free timing after device_unregister
to prevent duplicate filename error when re-allocating id
- Update NXP PTN5150 extcon driver and dt-binding document
: Handle pending IRQ events during system resume
: Allow "connector" node to present in devicetree
: Add Type-C orientation switch support to correctly
set orientation of multiplexer according to CC status
: Support USB role switch via connector fwnode
- Replace use of system_wq with system_percpu_wq on int3496 driver
- Make typec-power-opmode optional on usbc-tusb320 driver
: Prevent probe error when usb-c connector is configured
in the DT without "typec-power-opmode" property
* tag 'extcon-next-for-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: usbc-tusb320: Make typec-power-opmode optional
extcon: ptn5150: Support USB role switch via connector fwnode
extcon: ptn5150: Add Type-C orientation switch support
dt-bindings: extcon: ptn5150: Allow "connector" node to present
extcon: Fixed sysfs duplicate filename issue
extcon: int3496: replace use of system_wq with system_percpu_wq
extcon: ptn5150: handle pending IRQ events during system resume
The Clippy `precedence` lint was extended in Rust 1.85.0 to include
bitmasking and shift operations [1]. However, because it generated
many hits, in Rust 1.86.0 it was split into a new `precedence_bits`
lint which is not enabled by default [2].
In other words, only Rust 1.85 has a different behavior. For instance,
it reports:
warning: operator precedence can trip the unwary
--> drivers/gpu/nova-core/fb/hal/ga100.rs:16:5
|
16 | / u64::from(regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR::read(bar).adr_39_08()) << FLUSH_SYSMEM_ADDR_SHIFT
17 | | | u64::from(regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI::read(bar).adr_63_40())
18 | | << FLUSH_SYSMEM_ADDR_SHIFT_HI
| |_________________________________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#precedence
= note: `-W clippy::precedence` implied by `-W clippy::all`
= help: to override `-W clippy::all` add `#[allow(clippy::precedence)]`
help: consider parenthesizing your expression
|
16 ~ (u64::from(regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR::read(bar).adr_39_08()) << FLUSH_SYSMEM_ADDR_SHIFT) | (u64::from(regs::NV_PFB_NISO_FLUSH_SYSMEM_ADDR_HI::read(bar).adr_63_40())
17 + << FLUSH_SYSMEM_ADDR_SHIFT_HI)
|
While so far we try our best to keep all versions Clippy-clean, the
minimum (which is now Rust 1.85.0 after the bump) and the latest stable
are the most important ones; and this may be considered a "false positive"
with respect to the behavior in other versions.
Thus allow this lint for this version using the per-version flags
mechanism introduced in the previous commit.
Link: https://github.com/rust-lang/rust-clippy/issues/14097 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/14115 [2]
Link: https://lore.kernel.org/rust-for-linux/DFVDKMMA7KPC.2DN0951H3H55Y@kernel.org/
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-34-ojeda@kernel.org
[ Added paragraph from commit message to comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
By default bindgen will convert 'enum lru_status' into a typedef for an
integer. For the most part, an integer of the same size as the enum
results in the correct ABI, but in the specific case of CFI, that is not
the case. The CFI encoding is supposed to be the same as a struct called
'lru_status' rather than the name of the underlying native integer type.
To fix this, tell bindgen to generate a newtype and set the CFI type
explicitly. Note that we need to set the CFI attribute explicitly as
bindgen is using repr(transparent), which is otherwise identical to the
inner type for ABI purposes.
This allows us to remove the page range helper C function in Binder
without risking a CFI failure when list_lru_walk calls the provided
function pointer.
The --with-attribute-custom-enum argument requires bindgen v0.71 or
greater.
[ In particular, the feature was added in 0.71.0 [1][2].
In addition, `feature(cfi_encoding)` has been available since
Rust 1.71.0 [3].
Link: https://github.com/rust-lang/rust-bindgen/issues/2520 [1]
Link: https://github.com/rust-lang/rust-bindgen/pull/2866 [2]
Link: https://github.com/rust-lang/rust/pull/105452 [3]
- Miguel ]
My testing procedure was to add this to the android17-6.18 branch and
verify that rust_shrink_free_page is successfully called without crash,
and verify that it does in fact crash when the cfi_encoding is set to
other values. Note that I couldn't test this on android16-6.12 as that
branch uses a bindgen version that is too old.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260223-cfi-lru-status-v2-1-89c6448a63a4@google.com
[ Rebased on top of the minimum Rust version bump series which provide
the required `bindgen` version. - Miguel ]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-32-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently the example in the documentation shows a version-based name
for the Kconfig example:
RUSTC_VERSION_MIN_107900
The reason behind it was to possibly avoid repetition in case several
features used the same minimum.
However, we ended up preferring to give them a descriptive name for each
feature added even if that could lead to some repetition. In practice,
the repetition has not happened so far, and even if it does at some point,
it is not a big deal.
Thus replace the example in the documentation with one of our current
examples (after removing previous ones from the bump), to show how they
actually look like, and in case someone `grep`s for it.
In addition, it has the advantage that it shows the `RUSTC_HAS_*`
pattern we follow in `init/Kconfig`, similar to the C side.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-31-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There is no need to use `def_bool y if <expr>` -- one can simply write
`def_bool <expr>`.
In fact, the simpler form is how we actually use them in practice in
`init/Kconfig`.
Thus simplify the example.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-30-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The versions provided nowadays by even a distribution like Debian Stable
(and Debian Old Stable) are newer than those mentioned [1].
Thus remove the workaround.
Note that the minimum binutils version in the kernel is still 2.30, so
one could argue part of the note is still relevant, but it is unlikely
a kernel developer using such an old binutils is enabling Rust on a
modern kernel, especially when using distribution toolchains, e.g. the
Rust minimum version is not satisfied by Debian Old Stable.
So we are at the point where keeping the docs short and relevant for
essentially everyone is probably the better trade-off.
Link: https://packages.debian.org/search?suite=all&searchon=names&keywords=binutils [1]
Link: https://lore.kernel.org/all/CANiq72mCpc9=2TN_zC4NeDMpFQtPXAFvyiP+gRApg2vzspPWmw@mail.gmail.com/
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-29-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Until the version bump of `bindgen`, we needed to pass a dummy parameter
to avoid failing the `--version` call.
Thus remove it.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-22-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is not possible anymore to fall into the issue that this warning was
alerting about given the `bindgen` version bump.
Thus simplify by removing the machinery behind it, including tests.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260405235309.418950-20-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is not possible anymore to fall into the issue that this warning was
alerting about given the `bindgen` version bump.
Thus simplify by removing the machinery behind it, including tests.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260405235309.418950-19-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
As proposed in the past in e.g. LPC 2025 and the Maintainers Summit [1],
we are going to follow Debian Stable's `bindgen` versions as our minimum
supported version.
Debian Trixie was released with `bindgen` 0.71.1, which it still uses
to this day [2].
Debian Trixie's release happened on 2025-08-09 [3], which means that a
fair amount of time has passed since its release for kernel developers
to upgrade.
Thus bump the minimum to the new version.
Then, in later commits, clean up most of the workarounds and other bits
that this upgrade of the minimum allows us.
Ubuntu 25.10 also has a recent enough `bindgen` [4] (even the already
unsupported Ubuntu 25.04 had it), and they also provide versioned packages
with `bindgen` 0.71.1 back to Ubuntu 24.04 LTS [5].
Link: https://lwn.net/Articles/1050174/ [1]
Link: https://packages.debian.org/trixie/bindgen [2]
Link: https://www.debian.org/releases/trixie/ [3]
Link: https://packages.ubuntu.com/search?suite=all&searchon=names&keywords=bindgen [4]
Link: https://launchpad.net/ubuntu/+source/rust-bindgen-0.71 [5]
Acked-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-18-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Currently, we need to go through raw pointers and then re-create the
`NonNull` from the result of offsetting the raw pointer.
`feature(non_null_convenience)` [1] has been stabilized in Rust
1.80.0 [2], which is older than our new minimum Rust version
(Rust 1.85.0).
Thus, now that we bump the Rust minimum version, simplify using
`NonNull::add()` and clean the TODO note.
Link: https://github.com/rust-lang/rust/issues/117691 [1]
Link: https://github.com/rust-lang/rust/pull/124498 [2]
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260405235309.418950-15-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now that the Rust minimum version is 1.85.0, there is no need to enable
certain features that are stable.
Thus clean them up.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-13-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Back in Rust 1.82.0, I cleaned the `rustdoc::unescaped_backticks` lint in
upstream Rust and added tests so that hopefully it would not regress [1].
Thus we can remove it from our side given the Rust minimum version bump.
Link: https://github.com/rust-lang/rust/pull/128307 [1]
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-12-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With the Rust version bump in place, the `RUSTC_HAS_COERCE_POINTEE`
Kconfig (automatic) option is always true.
Thus remove the option and simplify the code.
In particular, this includes removing our use of the predecessor unstable
features we used with Rust < 1.84.0 (`coerce_unsized`, `dispatch_from_dyn`
and `unsize`).
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-11-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With the Rust version bump in place, the `RUSTC_HAS_SLICE_AS_FLATTENED`
Kconfig (automatic) option is always true.
Thus remove the option and simplify the code.
In particular, this includes removing the `slice` module which contained
the temporary slice helpers, i.e. the `AsFlattened` extension trait and
its `impl`s.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-10-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With the Rust version bump in place, several Kconfig conditions based on
`RUSTC_VERSION` are always true.
Thus simplify them.
The minimum supported major LLVM version by our new Rust minimum version
is now LLVM 18, instead of LLVM 16. However, there are no possible
cleanups for `RUSTC_LLVM_VERSION`.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-9-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`clippy::incompatible_msrv` is not buying us much, and we discussed
allowing it several times in the past.
For instance, there was recently another patch sent to `allow` it where
needed [1]. While that particular case would not be needed after the
minimum version bump to 1.85.0, it is simpler to just allow it to prevent
future instances.
[ In addition, the lint fired without taking into account the features
that have been enabled in a crate [2]. While this was improved in Rust
1.90.0 [3], it would still fire in a case like this patch. ]
Thus do so, and remove the last instance of locally allowing it we have
in the tree (except the one in the vendored `proc_macro2` crate).
Note that we still keep the `msrv` config option in `clippy.toml` since
that affects other lints as well.
Link: https://lore.kernel.org/rust-for-linux/20260404212831.78971-4-jhubbard@nvidia.com/ [1]
Link: https://github.com/rust-lang/rust-clippy/issues/14425 [2]
Link: https://github.com/rust-lang/rust-clippy/pull/14433 [3]
Link: https://patch.msgid.link/20260405235309.418950-8-ojeda@kernel.org
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Following the Rust compiler bump, we can now update Clippy's MSRV we
set in the configuration, which will improve the diagnostics it generates.
Thus do so and clean a few of the `allow`s that are not needed anymore.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
As proposed in the past in e.g. LPC 2025 and the Maintainers Summit [1],
we are going to follow Debian Stable's Rust versions as our minimum
supported version.
Debian Trixie was released with a Rust 1.85.0 toolchain [2], which it
still uses to this day [3] (i.e. no update to Rust 1.85.1).
Debian Trixie's release happened on 2025-08-09 [4], which means that a
fair amount of time has passed since its release for kernel developers
to upgrade.
Thus bump the minimum to the new version.
Then, in later commits, clean up most of the workarounds and other bits
that this upgrade of the minimum allows us.
pin-init was left as-is since the patches come from upstream. And the
vendored crates are unmodified, since we do not want to change those.
Note that the minimum LLVM major version for Rust 1.85.0 is LLVM 18 (the
Rust upstream binaries use LLVM 19.1.7), thus e.g. `RUSTC_LLVM_VERSION`
tests can also be updated, but there are no suitable ones to simplify.
Ubuntu 25.10 also has a recent enough Rust toolchain [5], and they also
provide versioned packages with a Rust 1.85.1 toolchain even back to
Ubuntu 22.04 LTS [6].
Link: https://lwn.net/Articles/1050174/ [1]
Link: https://www.debian.org/releases/trixie/release-notes/whats-new.en.html#desktops-and-well-known-packages [2]
Link: https://packages.debian.org/trixie/rustc [3]
Link: https://www.debian.org/releases/trixie/ [4]
Link: https://packages.ubuntu.com/search?suite=all&searchon=names&keywords=rustc [5]
Link: https://launchpad.net/ubuntu/+source/rustc-1.85 [6]
Acked-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Benno Lossin <lossin@kernel.org>
Acked-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260405235309.418950-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
These were likely copied from the `bindings` and `uapi` crates, but are
unneeded since there are no `cfg(test)`s in the bindings.
In addition, the issue that triggered the addition in those crates
originally is also fixed in `bindgen` (please see the previous commit).
Thus remove them.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260405235309.418950-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The issue that required `allow`s for `cfg(test)` code generated by
`bindgen` for layout testing was fixed back in `bindgen` 0.60.0 [1],
so it could have been removed even before the version bump, but it does
not hurt.
Thus remove it now.
Link: https://github.com/rust-lang/rust-bindgen/pull/2203 [1]
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There is a workaround that has not been needed, even already after commit
08ab786556 ("rust: bindgen: upgrade to 0.65.1"), but it does not hurt.
Thus remove it.
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260405235309.418950-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This far using crtc_state->pipe_src as borders for Selective Update area
haven't caused visible problems as drm_rect_width(crtc_state->pipe_src) ==
crtc_state->hw.adjusted_mode.crtc_hdisplay and
drm_rect_height(crtc_state->pipe_src) ==
crtc_state->hw.adjusted_mode.crtc_vdisplay when pipe scaling is not
used. On the other hand using pipe scaling is forcing full frame updates and all the
Selective Update area calculations are skipped. Now this improper usage of
crtc_state->pipe_src is causing following warnings:
<4> [7771.978166] xe 0000:00:02.0: [drm] drm_WARN_ON_ONCE(su_lines % vdsc_cfg->slice_height)
after WARN_ON_ONCE was added by commit:
"drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters"
These warnings are seen when DSC and pipe scaling are enabled
simultaneously. This is because on full frame update SU area is improperly
set as pipe_src which is not aligned with DSC slice height.
Fix these by creating local rectangle using
crtc_state->hw.adjusted_mode.crtc_hdisplay and
crtc_state->hw.adjusted_mode.crtc_vdisplay. Use this local rectangle as
borders for SU area.
Fixes: d6774b8c3c ("drm/i915: Ensure damage clip area is within pipe area")
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260327114553.195285-1-jouni.hogander@intel.com
(cherry picked from commit da0cdc1c32)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The JMicron JMB585 (and JMB582) SATA controllers advertise 64-bit DMA
support via the S64A bit in the AHCI CAP register, but their 64-bit DMA
implementation is defective. Under sustained I/O, DMA transfers targeting
addresses above 4GB silently corrupt data -- writes land at incorrect
memory addresses with no errors logged.
The failure pattern is similar to the ASMedia ASM1061
(commit 20730e9b27 ("ahci: add 43-bit DMA address quirk for ASMedia
ASM1061 controllers")), which also falsely advertised full 64-bit DMA
support. However, the JMB585 requires a stricter 32-bit DMA mask rather
than 43-bit, as corruption occurs with any address above 4GB.
On the Minisforum N5 Pro specifically, the combination of the JMB585's
broken 64-bit DMA with the AMD Family 1Ah (Strix Point) IOMMU causes
silent data corruption that is only detectable via checksumming
filesystems (BTRFS/ZFS scrub). The corruption occurs when 32-bit IOVA
space is exhausted and the kernel transparently switches to 64-bit DMA
addresses.
Add device-specific PCI ID entries for the JMB582 (0x0582) and JMB585
(0x0585) before the generic JMicron class match, using a new board type
that combines AHCI_HFLAG_IGN_IRQ_IF_ERR (preserving existing behavior)
with AHCI_HFLAG_32BIT_ONLY to force 32-bit DMA masks.
Signed-off-by: Arthur Husband <artmoty@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The automatic skipping of tests on ENOSYS returns was introduced in
commit 349afc8a52 ("selftests/nolibc: skip tests for unimplemented
syscalls"). It handled the fact that nolibc would return ENOSYS for many
syscall wrappers on riscv32.
Nowadays nolibc handles all these correctly, so this logic is not used
anymore. To make missing nolibc functionality more obvious fail the
tests again if something is not implemented.
Revert the mentioned commit again.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260406-nolibc-no-skip-enosys-v1-2-c046b1ac7d73@weissschuh.net/
Add some standard functions to convert between different byte orders.
Conveniently the UAPI headers provide all the necessary functionality.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260405-nolibc-bswap-v1-1-f7699ca9cee0@weissschuh.net
The standard syscall() function or macro uses the libc return value
convention. Errors returned from the kernel as negative values are
stored in errno and -1 is returned. Users who want to avoid using
errno don't have a way to call raw syscalls and check the returned
error.
Add a new macro _syscall() which works like the standard syscall()
but passes through the return value from the kernel unchanged.
The naming scheme and return values match the named _sys_foo()
system call wrappers already part of nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260405-nolibc-syscall-v1-3-e5b12bc63211@weissschuh.net
__sysret() transforms the return value from the kernel into the libc
return value convention. There is no reason for it to be called in the
middle of the internals of the syscall() implementation macros.
Move the call up, directly into syscall(), to make the code simpler.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260405-nolibc-syscall-v1-2-e5b12bc63211@weissschuh.net
These macros are the internal implementation of syscall().
They can not be used by users. Align them with the standard naming
scheme for internal symbols.
The current name also prevents the addition of an application-usable
_syscall() symbol.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260405-nolibc-syscall-v1-1-e5b12bc63211@weissschuh.net
to_ratio() computes BW_SHIFT-scaled bandwidth ratios from u64 period and
runtime values, but it returns unsigned long. tg_rt_schedulable() also
stores the current group limit and the accumulated child sum in unsigned
long.
On 32-bit builds, large bandwidth ratios can be truncated and the RT
group sum can wrap when enough siblings are present. That can let an
overcommitted RT hierarchy pass the schedulability check, and it also
narrows the helper result for other callers.
Return u64 from to_ratio() and use u64 for the RT group totals so
bandwidth ratios are preserved and compared at full width on both 32-bit
and 64-bit builds.
Fixes: b40b2e8eb5 ("sched: rt: multi level group constraints")
Assisted-by: Codex:GPT-5
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260403210014.2713404-1-joseph.salisbury@oracle.com
- Dinh & Yury's changes to use sysfs_emit() for sysfs read
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Sorry for the late post due to personal affairs.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCadRyjxMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaU7wBAMABdw6I4GNfj9NjwYhup0vP8KXmR8tu
fSsuMEfwiNBnAQDyEXq6/Ll8V5uX4TukAeJegKU6CO/4OUblFLo918ueBw==
=Qmik
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 7.1-rc1
- Dinh & Yury's changes to use sysfs_emit() for sysfs read
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Sorry for the late post due to personal affairs.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: switch show_canceled_csk() to using sysfs_emit()
fpga: bridge: Use sysfs_emit() instead of sprintf()
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overlap, causing an infinite loop and soft lockup.
Fix this by using __release_stripe() with temp_inactive_list instead
of raid5_release_stripe() in the failure path, so the stripe does not
go through the released_stripes llist. This allows raid5d to break out
of its loop, and the overlap will be resolved when the stripe is
eventually processed by handle_stripe().
Fixes: 773ca82fa1 ("raid5: make release_stripe lockless")
Cc: stable@vger.kernel.org
Signed-off-by: FengWei Shih <dannyshih@synology.com>
Signed-off-by: Chia-Ming Chang <chiamingc@synology.com>
Link: https://lore.kernel.org/linux-raid/20260402061406.455755-1-chiamingc@synology.com/
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
The third argument in INTEL_UNCORE_FR_EVENT_DESC() is subject to
__stringify(), and the extra double quote marks can result in the
expansion "3.814697266e-6" in the sysfs knobs, instead of
3.814697266e-6.
This is incorrect, though it may still work for perf, e.g.
perf stat -e uncore_iio_free_running_0/bw_in_port0/
Fixes: d8987048f6 ("perf/x86/intel/uncore: Support IIO free-running counters on DMR")
Closes: https://lore.kernel.org/all/20251231224233.113839-1-zide.chen@intel.com/
Reported-by: Chun-Tse Shao <ctshao@google.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260313174050.171704-5-zide.chen@intel.com
In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path,
uncore_device_to_die() may return -1 when all CPUs associated
with the UBOX device are offline.
Remove the WARN_ON_ONCE(die_id == -1) check for two reasons:
- The current code breaks out of the loop. This is incorrect because
pci_get_device() does not guarantee iteration in domain or bus order,
so additional UBOX devices may be skipped during the scan.
- Returning -EINVAL is incorrect, since marking offline buses with
die_id == -1 is expected and should not be treated as an error.
Separately, when NUMA is disabled on a NUMA-capable platform,
pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die()
to return -1 for all PCI devices. As a result,
spr_update_device_location(), used on Intel SPR and EMR, ignores the
corresponding PMON units and does not add them to the RB tree.
Fix this by using uncore_pcibus_to_dieid(), which retrieves topology
from the UBOX GIDNIDMAP register and works regardless of whether NUMA
is enabled in Linux. This requires snbep_pci2phy_map_init() to be
added in spr_uncore_pci_init().
Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where
NUMA is expected to be enabled.
Fixes: 9a7832ce3d ("perf/x86/intel/uncore: With > 8 nodes, get pci bus die id from NUMA info")
Fixes: 65248a9a9e ("perf/x86/uncore: Add a quirk for UPI on SPR")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://patch.msgid.link/20260313174050.171704-4-zide.chen@intel.com
