In the current implementation, the suspend/resume path frees the
existing IRQ handler and sets up a dedicated WoL IRQ handler, then
restores the original handler upon resume. This approach is not used
by any other Ethernet driver and unnecessarily complicates the
suspend/resume process. After adjusting the IRQ handler in the previous
patches, we can now handle WoL interrupts without introducing any
overhead in the TX/RX hot path. Therefore, the dedicated WoL IRQ
handler is removed.
I have verified WoL functionality on my AMD ZynqMP board using the
following steps:
root@amd-zynqmp:~# ifconfig end0 192.168.3.3
root@amd-zynqmp:~# ethtool -s end0 wol a
root@amd-zynqmp:~# echo mem >/sys/power/state
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-4-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current code, the IRQ handler checks each IRQ event sequentially.
Since most IRQ events are related to TX/RX operations, while other
events occur infrequently, this approach introduces unnecessary overhead
in the hot path for TX/RX processing. This patch reduces such overhead
by extracting the handling of all non-TX/RX events into a new function
and consolidating these events under a new flag. As a result, only a
single check is required to determine whether any non-TX/RX events have
occurred. If such events exist, the handler jumps to the new function.
This optimization reduces four conditional checks to one and prevents
the instruction cache from being polluted with rarely used code in the
hot path.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-3-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current implementation includes several occurrences of the
following pattern:
if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
queue_writel(queue, ISR, value);
Introduces a helper function to consolidate these repeated code
segments. No functional changes are made.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-2-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver currently duplicates the logic of napi_schedule() primarily
to include additional debug information. However, these debug details
are not essential for a specific driver and can be effectively obtained
through existing tracepoints in the networking core, such as
/sys/kernel/tracing/events/napi/napi_poll. Therefore, this patch
replaces the open-coded implementation with napi_schedule() to
simplify the driver's code.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260402-macb-irq-v2-1-942d98ab1154@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the AP masks are updated via apmask_store() or aqmask_store(),
ap_bus_revise_bindings() is called after ap_attr_mutex has been
released.
This calls __ap_revise_reserved(), which accesses the driver_override
field without holding any lock, racing against a concurrent
driver_override_store() that may free the old string, resulting in a
potential UAF.
Fix this by using the driver-core driver_override infrastructure, which
protects all accesses with an internal spinlock.
Note that unlike most other buses, the AP bus does not check
driver_override in its match() callback; the override is checked in
ap_device_probe() and __ap_revise_reserved() instead.
Also note that we do not enable the driver_override feature of struct
bus_type, as AP - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Additionally, AP has a custom counter that is modified in the
corresponding custom driver_override_store().
Fixes: d38a87d7c0 ("s390/ap: Support driver_override for AP queue devices")
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://patch.msgid.link/20260324005919.2408620-11-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: ebc3d17915 ("s390/cio: introduce driver_override on the css bus")
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Link: https://patch.msgid.link/20260324005919.2408620-10-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 539fec78ed ("vdpa: add driver_override support")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260324005919.2408620-9-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface".
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Signed-off-by: Yiqi Sun <sunyiqixm@gmail.com>
Link: https://patch.msgid.link/20260402070419.2291578-1-sunyiqixm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 12046f8c77 ("platform/x86: wmi: Add driver_override support")
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260324005919.2408620-7-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 782a985d7a ("PCI: Introduce new device binding path using pci_dev.driver_override")
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex@shazbot.org>
Tested-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260324005919.2408620-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Both links of the PPPoE section are no longer valid, and the CVS version
is no longer relevant.
- Replace the TLDP URL with the pppd project homepage.
- Update pppd version requirement for PPPoE.
- Update RP-PPPoE project homepage, and clarify that it's only needed
for server mode.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Reviewed-by: Julian Braha <julianbraha@gmail.com>
Link: https://patch.msgid.link/20260402050053.144250-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/rtnetlink.c:6989)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585)
___sys_sendmsg (net/socket.c:2641)
__sys_sendmsg (net/socket.c:2671)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048
Fixes: 430a049190 ("nexthop: Add support for nexthop groups")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Closes: https://lore.kernel.org/netdev/CAL_bE8Li2h4KO+AQFXW4S6Yb_u5X4oSKnkywW+LPFjuErhqELA@mail.gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260402072613.25262-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently NHA_HW_STATS_ENABLE is included twice everytime a dump of
nexthop group is performed with NHA_OP_FLAG_DUMP_STATS. As all the stats
querying were moved to nla_put_nh_group_stats(), leave only that
instance of the attribute querying.
Fixes: 5072ae00ae ("net: nexthop: Expose nexthop group HW stats to user space")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260402072613.25262-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Software nodes are currently initialized in a function registered as
a postcore_initcall(). However, some devices may want to register
software nodes earlier than that (or also in a postcore_initcall() where
they're at the mercy of the link order). Move the initialization to
driver_init() making swnode available much earlier as well as making
their initialization time deterministic.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260402-nokia770-gpio-swnodes-v5-3-d730db3dd299@oss.qualcomm.com
[ Fix typo in the commit message: "s/merci/mercy/". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
qca_tty_receive() consumes each input byte before checking whether a
completed frame needs a fresh receive skb. When the current byte completes
a frame, the driver delivers that frame and then allocates a new skb for
the next one.
If that allocation fails, the current code returns i even though data[i]
has already been consumed and may already have completed the delivered
frame. Since serdev interprets the return value as the number of accepted
bytes, this under-reports progress by one byte and can replay the final
byte of the completed frame into a fresh parser state on the next call.
Return i + 1 in that failure path so the accepted-byte count matches the
actual receive-state progress.
Fixes: dfc768fbe6 ("net: qualcomm: add QCA7000 UART driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260402071207.4036-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements
bc_ackers on every inbound group ACK, even when the same member has
already acknowledged the current broadcast round.
Because bc_ackers is a u16, a duplicate ACK received after the last
legitimate ACK wraps the counter to 65535. Once wrapped,
tipc_group_bc_cong() keeps reporting congestion and later group
broadcasts on the affected socket stay blocked until the group is
recreated.
Fix this by ignoring duplicate or stale ACKs before touching bc_acked or
bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and
prevents the underflow path.
Fixes: 2f487712b8 ("tipc: guarantee that group broadcast doesn't bypass group unicast")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/41a4833f368641218e444fdcff822039.security@1seal.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 is no longer a module, we no longer need to export these symbols.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260402174430.2462800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer
network namespace when creating paired devices (veth, vxcan,
netkit). This allows an unprivileged user with a user namespace
to create interfaces in arbitrary network namespaces, including
init_net.
Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer
namespace before allowing device creation to proceed.
Fixes: 81adee47df ("net: Support specifying the network namespace upon device creation.")
Signed-off-by: Nikolaos Gkarlis <nickgarlis@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260402181432.4126920-1-nickgarlis@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
selftests: drv-net: gro: more test cases
Add a few more test cases for GRO.
First 4 patches are unchanged from v1.
Patches 5 and 6 are new. Willem pointed out that the defines are
duplicated and all these imprecise defines have been annoying me
for a while so I decided to clean them up.
With the defines cleaned up and now more precise patch 7 (was 5)
no longer has to play any games with the MTU for ip6ip6.
The last patch now sends 3 segments as requested.
====================
Link: https://patch.msgid.link/20260402210000.1512696-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have a test for coalescing with bad TCP checksum, let's also
test bad IPv4 header checksum.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We explicitly test ipip encap. Let's add ip6ip6, too. Having
just ipip seems like favoring IPv4 which we should not do :)
Testing all combinations is left for future work, not sure
it's actually worth it.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When constructing the packets for large_* test cases we use
a static value for packet count and MSS. It works okay for
ipv4 vs ipv6 but the gap between ipv4 and ip6ip6 is going to
be quite significant.
Make the defines calculate the worst case values, those
are only used for sizing stack arrays. Create helpers for
calculating precise values based on the exact test case.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem points out TOTAL_HDR_LEN is identical to MAX_HDR_LEN.
This seems to have been the case ever since the test was added.
Replace the uses of TOTAL_HDR_LEN with MAX_HDR_LEN, MAX seems
more common for what this value is.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Try to use already calculated offsets and not depend on the ipip
flag as much. This patch should not change any functionality,
it's just a cleanup to make ip6ip6 support easier.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new capacity/order test exits as soon as it sees the expected
packet sequence. This may allow the "flushing" FIN packet to spill
over to the next test. Let's always wait for the FIN before exiting.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small IPv4 packets get padded to 60B, this may break / confuse
some buggy implementations. Add a test to coalesce a 1B payload.
Keep this separate from the lrg_sml test because I suspect some
implementations may not handle this case (treat padded frames
as ineligible for coalescing).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test trying to induce a GRO context timeout followed
by another sequence of packets for the same flow. The second
burst arrives 100ms after the first one so any implementation
(SW or HW) must time out waiting at that point. We expect both
bursts to be aggregated successfully but separately.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On NXP i.MX7D, i.MX8MM, and i.MX8MQ chipsets, MSIs from the endpoints won't
be received by the iMSI-RX MSI controller if the Root Port MSI capability
is disabled.
Even though the Root Port MSIs won't be received by the iMSI-RX controller
due to design, these chipsets have some weird hardware bug that prevents
the endpoint MSIs from reaching when the Root Port MSI capability is
disabled.
Hence, introduce a new flag, 'dw_pcie_rp::keep_rp_msi_en', set it for the
above mentioned SoCs, and always keep the Root Port MSI capability when
this flag is set.
Note that by keeping Root Port MSI capability, Root Port MSIs such as AER,
PME and others won't be received by default. So users need to use
workarounds such as passing 'pcie_pme=nomsi' cmdline param.
Fixes: f5cd8a929c ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller")
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: commit log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260331085252.1243108-1-hongxing.zhu@nxp.com
When CONFIG_BRIDGE_VLAN_FILTERING is not set, br_vlan_group() and
nbp_vlan_group() return NULL (br_private.h stub definitions). The
BR_BOOLOPT_FDB_LOCAL_VLAN_0 toggle code is compiled unconditionally and
reaches br_fdb_delete_locals_per_vlan_port() and
br_fdb_insert_locals_per_vlan_port(), where the NULL vlan group pointer
is dereferenced via list_for_each_entry(v, &vg->vlan_list, vlist).
The observed crash is in the delete path, triggered when creating a
bridge with IFLA_BR_MULTI_BOOLOPT containing BR_BOOLOPT_FDB_LOCAL_VLAN_0
via RTM_NEWLINK. The insert helper has the same bug pattern.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7]
RIP: 0010:br_fdb_delete_locals_per_vlan+0x2b9/0x310
Call Trace:
br_fdb_toggle_local_vlan_0+0x452/0x4c0
br_toggle_fdb_local_vlan_0+0x31/0x80 net/bridge/br.c:276
br_boolopt_toggle net/bridge/br.c:313
br_boolopt_multi_toggle net/bridge/br.c:364
br_changelink net/bridge/br_netlink.c:1542
br_dev_newlink net/bridge/br_netlink.c:1575
Add NULL checks for the vlan group pointer in both helpers, returning
early when there are no VLANs to iterate. This matches the existing
pattern used by other bridge FDB functions such as br_fdb_add() and
br_fdb_delete().
Fixes: 21446c06b4 ("net: bridge: Introduce UAPI for BR_BOOLOPT_FDB_LOCAL_VLAN_0")
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402140153.3925663-1-yzjaurora@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to check __in6_dev_get() for possible NULL value, as
suggested by Yiming Qian.
Also add skb_dst_dev_rcu() instead of skb_dst_dev(),
and two missing READ_ONCE().
Note that @dev can't be NULL.
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260402101732.1188059-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e153 ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path.
Fixes: d6d2b0e153 ("net: airoha: Fix page recycling in airoha_qdma_rx_process()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260402-airoha_qdma_rx_process-mem-leak-fix-v1-1-b5706f402d3c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_FIXED_PHY is in a loadable module, the fec driver cannot be
built-in any more:
x86_64-linux-ld: vmlinux.o: in function `fec_enet_mii_probe':
fec_main.c:(.text+0xc4f367): undefined reference to `fixed_phy_unregister'
x86_64-linux-ld: vmlinux.o: in function `fec_enet_close':
fec_main.c:(.text+0xc59591): undefined reference to `fixed_phy_unregister'
x86_64-linux-ld: vmlinux.o: in function `fec_enet_mii_probe.cold':
Select the fixed phy support on all targets to make this build
correctly, not just on coldfire.
Notat that Essentially the stub helpers in include/linux/phy_fixed.h
cannot be used correctly because of this build time dependency,
and we could just remove them to hit the build failure more often
when a driver uses them without the 'select FIXED_PHY'.
Fixes: dc86b621e1 ("net: fec: register a fixed phy using fixed_phy_register_100fd if needed")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260402141048.2713445-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Point to the relevant sections in the most recent release 7.0 of the PCIe
spec. Text has mostly just moved around without any semantic change.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260330-fix_pciatops-v7-3-f601818417e8@linux.ibm.com
When inspecting the config space of a Connect-X physical function in an
s390 system after it was initialized by the mlx5_core device driver, we
found the function to be enabled to request AtomicOps despite the Root Port
lacking support for completing them:
00:00.1 Ethernet controller: Mellanox Technologies MT2894 Family [ConnectX-6 Lx]
Subsystem: Mellanox Technologies Device 0002
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
AtomicOpsCtl: ReqEn+
On s390 and many virtualized guests, the Endpoint is visible but the Root
Port is not. In this case, pci_enable_atomic_ops_to_root() previously
enabled AtomicOps in the Endpoint even though it can't tell whether the
Root Port supports them as a completer.
Change pci_enable_atomic_ops_to_root() to fail if there's no Root Port or
the Root Port doesn't support AtomicOps.
Fixes: 430a23689d ("PCI: Add pci_enable_atomic_ops_to_root()")
Reported-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
[bhelgaas: commit log, check RP first to simplify flow]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260330-fix_pciatops-v7-2-f601818417e8@linux.ibm.com
Since Root Complex Integrated Endpoints (RCiEPs) attach to a bus that has
no bridge device describing the Root Port, the capability to complete
AtomicOps requests cannot be determined with PCIe methods.
Change default of pci_enable_atomic_ops_to_root() to not enable AtomicOps
requests on RCiEPs.
As far as we know, there are no RCiEPs that need AtomicOps (see Link
below).
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260330-fix_pciatops-v7-1-f601818417e8@linux.ibm.com
The clocks for qcom-ethqos return a rate of zero as firmware manages
their rate. According to hardware documentation, the clock which is
fed to the slave AHB interface can range between 50 to 100MHz for
non-RGMII and 30 to 75MHz for boards with a RGMII interfaces.
Currently, stmmac uses an undefined divisor value. Instead, use
STMMAC_CSR_60_100M which will mean we meet IEEE 802.3 specification
since this will generate:
714kHz @ 30MHz
1.19MHz @ 50MHz
1.79MHz @ 75MHz
2.42MHz @ 100MHz
This gives MDC rates within the IEEE 802.3 specification, although the
30MHz case is particularly slow.
Selecting the next lowest divisor, STMMAC_CSR_35_60M, which is /26
will give:
1.15MHz @ 30MHz
1.92MHz @ 50MHz
2.88MHz @ 75MHz (exceeding 802.3 spec)
3.85MHz @ 100MHz (exceeding 802.3 spec)
Unfortunately, this divisor makes the upper bound of both ranges exeed
the IEEE 802.3 specification, and thus we can not use it without knowing
for certain what the current CSR clock rate actually is.
So, STMMAC_CSR_60_100M is the best fit for all boards based on the
information provided thus far.
Link: https://lore.kernel.org/r/acGhQ0oui+dVRdLY@oss.qualcomm.com
Link: https://lore.kernel.org/r/acw1habUsiSqlrky@oss.qualcomm.com
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w8JKr-0000000EdLC-41Bt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are already 'if STMMAC_ETH' and 'STMMAC_PLATFORM'
conditions wrapping these config options, making the
'depends on' statements duplicate dependencies (dead code).
I propose leaving the outer 'if STMMAC_PLATFORM...endif' and
'if STMMAC_ETH...endif' conditions, and removing the
individual 'depends on' statements.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260402145858.240231-1-julianbraha@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_csum_act() walks nested VLAN headers directly from skb->data when an
skb still carries in-payload VLAN tags. The current code reads
vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without
first ensuring that the full VLAN header is present in the linear area.
If only part of an inner VLAN header is linearized, accessing
h_vlan_encapsulated_proto reads past the linear area, and the following
skb_pull(VLAN_HLEN) may violate skb invariants.
Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and
pulling each nested VLAN header. If the header still is not fully
available, drop the packet through the existing error path.
Fixes: 2ecba2d1e4 ("net: sched: act_csum: Fix csum calc for tagged packets")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Ruide Cao <caoruide123@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/22df2fcb49f410203eafa5d97963dd36089f4ecf.1774892775.git.caoruide123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clippy in Rust 1.88.0 (only) reported [1] up to the previous commit:
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:112:23
|
112 | let content = format!("{param}:{content}", param = param, content = content);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
= note: `-W clippy::uninlined-format-args` implied by `-W clippy::all`
= help: to override `-W clippy::all` add `#[allow(clippy::uninlined_format_args)]`
help: change this to
|
112 - let content = format!("{param}:{content}", param = param, content = content);
112 + let content = format!("{param}:{content}");
The reason it only triggers in that version is that the lint was moved
from `pedantic` to `style` in Rust 1.88.0 and then back to `pedantic`
in Rust 1.89.0 [2][3].
In this case, the suggestion is fair and a pure simplification, thus
just apply it.
In addition, do the same for another place in the file that Clippy does
not report because it is multi-line.
Link: https://lore.kernel.org/rust-for-linux/CANiq72=drAtf3y_DZ-2o4jb6Az9J3Yj4QYwWnbRui4sm4AJD3Q@mail.gmail.com/ [1]
Link: https://github.com/rust-lang/rust-clippy/pull/15287 [2]
Link: https://github.com/rust-lang/rust-clippy/issues/15151 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patch.msgid.link/20260331205849.498295-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The existing SELinux security model for overlayfs is to allow access if
the current task is able to access the top level file (the "user" file)
and the mounter's credentials are sufficient to access the lower
level file (the "backing" file). Unfortunately, the current code does
not properly enforce these access controls for both mmap() and mprotect()
operations on overlayfs filesystems.
This patch makes use of the newly created security_mmap_backing_file()
LSM hook to provide the missing backing file enforcement for mmap()
operations, and leverages the backing file API and new LSM blob to
provide the necessary information to properly enforce the mprotect()
access controls.
Cc: stable@vger.kernel.org
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Stacked filesystems such as overlayfs do not currently provide the
necessary mechanisms for LSMs to properly enforce access controls on the
mmap() and mprotect() operations. In order to resolve this gap, a LSM
security blob is being added to the backing_file struct and the following
new LSM hooks are being created:
security_backing_file_alloc()
security_backing_file_free()
security_mmap_backing_file()
The first two hooks are to manage the lifecycle of the LSM security blob
in the backing_file struct, while the third provides a new mmap() access
control point for the underlying backing file. It is also expected that
LSMs will likely want to update their security_file_mprotect() callback
to address issues with their mprotect() controls, but that does not
require a change to the security_file_mprotect() LSM hook.
There are a three other small changes to support these new LSM hooks:
* Pass the user file associated with a backing file down to
alloc_empty_backing_file() so it can be included in the
security_backing_file_alloc() hook.
* Add getter and setter functions for the backing_file struct LSM blob
as the backing_file struct remains private to fs/file_table.c.
* Constify the file struct field in the LSM common_audit_data struct to
better support LSMs that need to pass a const file struct pointer into
the common LSM audit code.
Thanks to Arnd Bergmann for identifying the missing EXPORT_SYMBOL_GPL()
and supplying a fixup.
Cc: stable@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org
Cc: linux-erofs@lists.ozlabs.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In preparation to adding LSM blob to backing_file struct, factor out
helpers init_backing_file() and backing_file_free().
Cc: stable@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org
Cc: linux-erofs@lists.ozlabs.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
[PM: use the term "LSM blob", fix comment style to match file]
Signed-off-by: Paul Moore <paul@paul-moore.com>
We only need to convert to picosecond units before writing to RING_IDLEDLY.
Fixes: 7c53ff050b ("drm/xe: Apply Wa_16023105232")
Cc: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Acked-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260401012710.4165547-1-vinay.belgaumkar@intel.com
Now that we have a worker thread, we can try to access the
IBs of the job. The process is:
* get the VM from the PASID
* get the BO from its VA and the VM
* map the BO for CPU access
* copy everything, then add it to the dump
Each step can fail so we have to be cautious.
These operations can be slow so when amdgpu_devcoredump_format
is called only to determine the size of the buffer we skip all
of them and assume they will succeed.
---
v3: use kvfree
---
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store the basic state of IBs so we can read it back in the
amdgpu_devcoredump_format function.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Corrects a failure on context switch. On registration of context with
indirect ring state will correct state of targeted and idle command
streamers.
This Wa requires GuC 70.53+ (uapi 1.26+). If indirect_ring_state is
enabled and Wa is unavailable, notify and disable indirect_ring_state.
Added additional XE_RTP_PASTE macros for expansion of longer rules.
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260304003431.758201-4-julia.filipchuk@intel.com
Refactor CXL core/region code to make region code more manageable by
splitting out DAX and PMEM code from RAM handling code.
cxl/core: use cleanup.h for devm_cxl_add_dax_region
cxl/core/region: move dax region device logic into region_dax.c
cxl/core/region: move pmem region driver logic into region_pmem.c
The series addresses conflicts between HMEM and CXL when handling Soft
Reserved memory ranges. CXL will try best effort in claiming the Soft
Reserved memory region that are CXL regions. If fails, it will punt
back to HMEM.
tools/testing/cxl: Test dax_hmem takeover of CXL regions
tools/testing/cxl: Simulate auto-assembly failure
dax/hmem: Parent dax_hmem devices
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax/hmem: Reduce visibility of dax_cxl coordination symbols
cxl/region: Constify cxl_region_resource_contains()
cxl/region: Limit visibility of cxl_region_contains_resource()
dax/cxl: Fix HMEM dependencies
cxl/region: Fix use-after-free from auto assembly failure
dax/hmem, cxl: Defer and resolve Soft Reserved ownership
cxl/region: Add helper to check Soft Reserved containment by CXL regions
dax: Track all dax_region allocations under a global resource tree
dax/cxl, hmem: Initialize hmem early and defer dax_cxl binding
dax/hmem: Gate Soft Reserved deferral on DEV_DAX_CXL
dax/hmem: Request cxl_acpi and cxl_pci before walking Soft Reserved ranges
dax/hmem: Factor HMEM registration into __hmem_register_device()
dax/bus: Use dax_region_put() in alloc_dax_region() error path
