The function platform_irq_count() returns negative error codes and
iommu->irqs_count is an unsigned integer, so the check
(iommu->irqs_count <= 0) is always impossible.
Make the return value of platform_irq_count() be assigned to ret, check
for error, and then assign iommu->irqs_count to ret.
Detected by Smatch:
drivers/iommu/riscv/iommu-platform.c:119 riscv_iommu_platform_probe() warn:
'iommu->irqs_count' unsigned <= 0
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Fixes: 5c0ebbd3c6 ("iommu/riscv: Add RISC-V IOMMU platform device driver")
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cleanup the gotos in the function. No functional change.
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260327020203.876122-4-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
core/region.c is overloaded with per-region control logic (pmem, dax,
sysram, etc). Move the CXL DAX region device infrastructure from
region.c into a new region_dax.c file.
This will also allow us to add additional dax-driver integration paths
that don't further dirty the core region.c logic.
No functional changes.
Signed-off-by: Gregory Price <gourry@gourry.net>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260327020203.876122-3-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
core/region.c is overloaded with per-region control logic (pmem, dax,
sysram, etc). Move the pmem region driver logic from region.c into
region_pmem.c make it clear that this code only applies to pmem regions.
No functional changes.
[ dj: Fixed up some tabbing issues, may be from original code. ]
Signed-off-by: Gregory Price <gourry@gourry.net>
Co-developed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260327020203.876122-2-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
commit 8a9782346d ("ASoC: topology: Add topology core")
added dobj_list to Component and Card, but Card side has
never been used. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874im2xa98.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver includes the legacy GPIO header <linux/gpio.h> but does
not use any symbols from it so drop the include. (It is already
using the consumer header as is proper.)
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-asoc-rt1318-v1-2-9fcecf868fda@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a comment explaining the design intent behind rejecting built-in DSQs
(%SCX_DSQ_GLOBAL and %SCX_DSQ_LOCAL*) as sources. Local DSQs support
reenqueueing but the BPF scheduler cannot directly iterate or move tasks
from them. %SCX_DSQ_GLOBAL is similar but also doesn't support
reenqueueing because it maps to multiple per-node DSQs, making the scope
difficult to define.
Also annotate @dsq_id to make clear it must be a user-created DSQ.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_central currently assumes that ops.init() runs on the selected
central CPU and aborts otherwise. This is no longer true, as ops.init()
is invoked from the scx_enable_helper thread, which can run on any
CPU.
As a result, sched_setaffinity() from userspace doesn't work, causing
scx_central to fail when loading with:
[ 1985.319942] sched_ext: central: scx_central.bpf.c:314: init from non-central CPU
[ 1985.320317] scx_exit+0xa3/0xd0
[ 1985.320535] scx_bpf_error_bstr+0xbd/0x220
[ 1985.320840] bpf_prog_3a445a8163fa8149_central_init+0x103/0x1ba
[ 1985.321073] bpf__sched_ext_ops_init+0x40/0xa8
[ 1985.321286] scx_root_enable_workfn+0x507/0x1650
[ 1985.321461] kthread_worker_fn+0x260/0x940
[ 1985.321745] kthread+0x303/0x3e0
[ 1985.321901] ret_from_fork+0x589/0x7d0
[ 1985.322065] ret_from_fork_asm+0x1a/0x30
DEBUG DUMP
===================================================================
central: root
scx_enable_help[134] triggered exit kind 1025:
scx_bpf_error (scx_central.bpf.c:314: init from non-central CPU)
Fix this by:
- Defer bpf_timer_start() to the first dispatch on the central CPU.
- Initialize the BPF timer in central_init() and kick the central CPU
to guarantee entering the dispatch path on the central CPU immediately.
- Remove the unnecessary sched_setaffinity() call in userspace.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
The purpose of supporting LSUI is to eliminate PAN toggling. CPUs that
support LSUI are unlikely to support a 32-bit runtime. Rather than
emulating the SWP instruction using LSUI instructions in order to remove
PAN toggling, simply disable SWP emulation.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
[catalin.marinas@arm.com: some tweaks to the in-code comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The current probe time ownership check for Soft Reserved memory based
solely on CXL window intersection is insufficient. dax_hmem probing is not
always guaranteed to run after CXL enumeration and region assembly, which
can lead to incorrect ownership decisions before the CXL stack has
finished publishing windows and assembling committed regions.
Introduce deferred ownership handling for Soft Reserved ranges that
intersect CXL windows. When such a range is encountered during the
initial dax_hmem probe, schedule deferred work to wait for the CXL stack
to complete enumeration and region assembly before deciding ownership.
Once the deferred work runs, evaluate each Soft Reserved range
individually: if a CXL region fully contains the range, skip it and let
dax_cxl bind. Otherwise, register it with dax_hmem. This per-range
ownership model avoids the need for CXL region teardown and
alloc_dax_region() resource exclusion prevents double claiming.
Introduce a boolean flag dax_hmem_initial_probe to live inside device.c
so it survives module reload. Ensure dax_cxl defers driver registration
until dax_hmem has completed ownership resolution. dax_cxl calls
dax_hmem_flush_work() before cxl_driver_register(), which both waits for
the deferred work to complete and creates a module symbol dependency that
forces dax_hmem.ko to load before dax_cxl.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260322195343.206900-9-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When a bootlog requires multiple MHI messages to transfer fully, the
messages prior to the final message may have MHI overflow status set.
Preserve these log messages in the accumulating bootlog. Do not treat
overflow as an error.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Troy Hanson <thanson@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251223170511.2277302-1-youssef.abdulrahman@oss.qualcomm.com
Add a helper to determine whether a given Soft Reserved memory range is
fully contained within the committed CXL region.
This helper provides a primitive for policy decisions in subsequent
patches such as co-ordination with dax_hmem to determine whether CXL has
fully claimed ownership of Soft Reserved memory ranges.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260322195343.206900-8-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Introduce a global "DAX Regions" resource root and register each
dax_region->res under it via request_resource(). Release the resource on
dax_region teardown.
By enforcing a single global namespace for dax_region allocations, this
ensures only one of dax_hmem or dax_cxl can successfully register a
dax_region for a given range.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260322195343.206900-7-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Convert the Mediatek MT8173 with RT5650 and RT5514 sound card
bindings to DT schema.
Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260327134649.31376-1-khushalchitturi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move hmem/ earlier in the dax Makefile so that hmem_init() runs before
dax_cxl.
In addition, defer registration of the dax_cxl driver to a workqueue
instead of using module_cxl_driver(). This ensures that dax_hmem has
an opportunity to initialize and register its deferred callback and make
ownership decisions before dax_cxl begins probing and claiming Soft
Reserved ranges.
Mark the dax_cxl driver as PROBE_PREFER_ASYNCHRONOUS so its probe runs
out of line from other synchronous probing avoiding ordering
dependencies while coordinating ownership decisions with dax_hmem.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Tomasz Wolski <tomasz.wolski@fujitsu.com>
Link: https://patch.msgid.link/20260322195343.206900-6-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Replace IS_ENABLED(CONFIG_CXL_REGION) with IS_ENABLED(CONFIG_DEV_DAX_CXL)
so that HMEM only defers Soft Reserved ranges when CXL DAX support is
enabled. This makes the coordination between HMEM and the CXL stack more
precise and prevents deferral in unrelated CXL configurations.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260322195343.206900-5-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Ensure cxl_acpi has published CXL Window resources before HMEM walks Soft
Reserved ranges.
Replace MODULE_SOFTDEP("pre: cxl_acpi") with an explicit, synchronous
request_module("cxl_acpi"). MODULE_SOFTDEP() only guarantees eventual
loading, it does not enforce that the dependency has finished init
before the current module runs. This can cause HMEM to start before
cxl_acpi has populated the resource tree, breaking detection of overlaps
between Soft Reserved and CXL Windows.
Also, request cxl_pci before HMEM walks Soft Reserved ranges. Unlike
cxl_acpi, cxl_pci attach is asynchronous and creates dependent devices
that trigger further module loads. Asynchronous probe flushing
(wait_for_device_probe()) is added later in the series in a deferred
context before HMEM makes ownership decisions for Soft Reserved ranges.
Add an additional explicit Kconfig ordering so that CXL_ACPI and CXL_PCI
must be initialized before DEV_DAX_HMEM. This prevents HMEM from consuming
Soft Reserved ranges before CXL drivers have had a chance to claim them.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Tomasz Wolski <tomasz.wolski@fujitsu.com>
Link: https://patch.msgid.link/20260322195343.206900-4-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Separate the CXL overlap check from the HMEM registration path and keep
the platform-device setup in a dedicated __hmem_register_device().
This makes hmem_register_device() the policy entry point for deciding
whether a range should be deferred to CXL, while __hmem_register_device()
handles the HMEM registration flow.
No functional changes.
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260322195343.206900-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
alloc_dax_region() calls kref_init() on the dax_region early in the
function, but the error path for sysfs_create_groups() failure uses
kfree() directly to free the dax_region. This bypasses the kref lifecycle.
Use dax_region_put() instead to handle kref lifecycle correctly.
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260322195343.206900-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Instead of storing and emitting bootlogs as individual null-terminated
lines, concatenate them, and later emit them to debugfs in a single call.
Do not insert a null terminator on messages received from the device.
Instead use the message length when subsequently storing the message.
Exclude trailing nulls to normalize AIC100 and AIC200 bootlog lines.
Signed-off-by: Troy Hanson <thanson@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251223170226.2275812-1-youssef.abdulrahman@oss.qualcomm.com
Update copyright headers in accordance with Qualcomm's current
legal policy.
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251223172425.2283978-1-youssef.abdulrahman@oss.qualcomm.com
When a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEV
transaction to the host over the QAIC_CONTROL MHI channel. QAIC handles
this by calling decode_deactivate() to release the resources allocated for
that DBC. Since that handling is done in the qaic_manage_ioctl() context,
if the user goes away before receiving and handling the deactivation, the
host will be out-of-sync with the DBCs available for use, and the DBC
resources will not be freed unless the device is removed. If another user
loads and requests to activate a network, then the device assigns the same
DBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,
leading the user process to hang.
As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactions
that are received after the user has gone away.
Fixes: 129776ac2e ("accel/qaic: Add control path")
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205123415.3870898-1-youssef.abdulrahman@oss.qualcomm.com
get_data() has a sanity check for regular data blocks to ensure at
least space for the ID exists. But a regular block should also have
at least 1 byte of data (otherwise it would be data-less instead of
regular).
Expand the get_data() block size sanity check to additionally expect
at least 1 byte of data.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20260326133809.8045-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Commit cc3bad11de ("printk_ringbuffer: Fix check of valid data
size when blk_lpos overflows") added sanity checking to get_data()
to avoid returning data of illegal sizes (too large or too small).
It uses the helper function data_check_size() for the check.
However, data_check_size() expects the size of the data, not the
size of the data block. get_data() is providing the size of the
data block. This means that if the data size (text_buf_size) is
at or near the maximum legal size:
sizeof(prb_data_block) + text_buf_size == DATA_SIZE(data_ring) / 2
data_check_size() will report failure because it adds
sizeof(prb_data_block) to the provided size. The sanity check in
get_data() is counting the data block header twice. The result is
that the reader fails to read the legal record.
Since get_data() subtracts the data block header size before returning,
move the sanity check to after the subtraction.
Luckily printk() is not vulnerable to this problem because
truncate_msg() limits printk-messages to 1/4 of the ringbuffer.
Indeed, by adjusting the printk_ringbuffer KUnit test, which does not
use printk() and its truncate_msg() check, it is easy to see that the
reader fails and the WARN_ON is triggered.
Fixes: cc3bad11de ("printk_ringbuffer: Fix check of valid data size when blk_lpos overflows")
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20260326133809.8045-1-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Christian Brauner says:
====================
bpf: classify block device hooks and add selftests
A bunch of new hooks for managing block devices were added a while ago
but they weren't appropriately classified. Classify them and add a test
program so we catch regressions.
Note that for whatever reason building the bpf selftests locally seems
to fail for all kinds of arcane reasons for me. That might just be my
fault. I added a pr against the ci to have the selftests run but to test
this meaningfully it needs veritysetup and dmverity support. I'm not
sure if that's available already.
Signed-off-by: Christian Brauner <brauner@kernel.org>
---
Changes in v2:
- No changes.
- Link to v1: https://patch.msgid.link/20260220-work-bpf-bdev-v1-0-c53e852c4702@kernel.org
---
====================
Link: https://patch.msgid.link/20260326-work-bpf-bdev-v2-0-5e3c58963987@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A bunch of new hooks for managing block devices were added a while ago
but they weren't actually appropriately classified.
* bpf_lsm_bdev_alloc() is called when the inode for the block
device is allocated. This happens from a sleepable context so mark the
function as sleepable. When this function is called the memory for the
block device storage embedded into the inode is zeroed. That block
device cannot be meaningfully reference or interacted with at this
point. So mark it as untrusted for now.
* bpf_lsm_bdev_free() is called when the inode for the block
device is freed. A bunch of memory associated with the block device
has already been freed and there's dangling pointers in there. So mark
it as untrusted. It cannot be meaningfully referenced or interacted
with anymore. It is also called from sb->s_op->free_inode:: which
means it runs in rcu context (most of the times). So leave it as
non-sleepable.
* bpf_lsm_bdev_setintegrity() is called when a dm-verity device
is instantiated (glossing over details for simplicity of the commit
message). The block device is very much alive so it remains a trusted
hook. It's also called with device mapper's suspend lock held and so
the hook is able to sleep so mark it sleepable.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20260326-work-bpf-bdev-v2-1-5e3c58963987@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
udf_setsize() can race with udf_writepages() as follows:
udf_setsize() udf_writepages()
if (iinfo->i_alloc_type ==
ICBTAG_FLAG_AD_IN_ICB)
err = udf_expand_file_adinicb(inode);
err = udf_extend_file(inode, newsize);
udf_adinicb_writepages()
memcpy_from_file_folio() - crash
because inode size is too big.
Fix the problem by checking the file type under folio lock in
udf_handle_page_wb() handler called from __mpage_writepages() which
properly serializes with udf_expand_file_adinicb().
Reported-by: Jianzhou Zhao <luckd0g@163.com>
Link: https://lore.kernel.org/all/f622c01.67ac.19cdbdd777d.Coremail.luckd0g@163.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260326140635.15895-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Some filesystems need to treat some folios specially (for example for
inodes with inline data). Doing the handling in their .writepages method
in a race-free manner results in duplicating some of the writeback
internals. So provide generalized version of mpage_writepages() that
allows filesystem to provide a handler called for each folio which can
handle the folio in a special way.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260326140635.15895-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
When vNTB is used as a PCI endpoint function, the NTB device is backed
by a virtual PCI function. For DMA API allocations and mappings, NTB
clients must use the device that is associated with the IOMMU domain.
Implement ntb_dev_ops->get_dma_dev() for pci-epf-vntb and return the EPC
parent device.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260306031443.1911860-4-den@valinux.co.jp
ntb_transport currently uses ndev->pdev->dev for coherent allocations
and frees.
Switch the coherent buffer allocation/free paths to use
ntb_get_dma_dev(), so ntb_transport can work with NTB implementations
where the NTB PCI function is not the right device to use for DMA
mappings.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260306031443.1911860-3-den@valinux.co.jp
Some NTB implementations are backed by a PCI function that is not the right
struct device to use with DMA API helpers (e.g. due to IOMMU topology, or
because the NTB device is virtual).
Add an optional .get_dma_dev() callback to struct ntb_dev_ops and provide a
helper, ntb_get_dma_dev(), so NTB clients can use the appropriate struct
device for DMA allocations and mappings.
If the callback is not implemented, ntb_get_dma_dev() returns the current
default (ntb->dev.parent). Drivers that implement .get_dma_dev() must
return a non-NULL device.
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: format doc]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260306031443.1911860-2-den@valinux.co.jp
When FRED is enabled, its initialization message is printed for every CPU
during boot as well as during suspend-resume. This debug message can be noisy
and it isn't very useful unless someone is debugging FRED itself.
As FRED is enabled by default, remove the log message as mentioned in
the code comment.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260325230151.1898287-4-hpa@zytor.com
MPAM (Memory Partitioning and Monitoring) is now exposed to user-space via
resctrl. Add some documentation so the user knows what features to expect.
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Signed-off-by: James Morse <james.morse@arm.com>
CMN-650 is afflicted with an erratum where the CSU NRDY bit never clears.
This tells us the monitor never finishes scanning the cache. The erratum
document says to wait the maximum time, then ignore the field.
Add a flag to indicate whether this is the final attempt to read the
counter, and when this quirk is applied, ignore the NRDY field.
This means accesses to this counter will always retry, even if the counter
was previously programmed to the same values.
The counter value is not expected to be stable, it drifts up and down with
each allocation and eviction. The CSU register provides the value for a
point in time.
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The registers MSMON_MBWU_L and MSMON_MBWU return the number of requests
rather than the number of bytes transferred.
Bandwidth resource monitoring is performed at the last level cache, where
each request arrive in 64Byte granularity. The current implementation
returns the number of transactions received at the last level cache but
does not provide the value in bytes. Scaling by 64 gives an accurate byte
count to match the MPAM specification for the MSMON_MBWU and MSMON_MBWU_L
registers. This patch fixes the issue by reporting the actual number of
bytes instead of the number of transactions from __ris_msmon_read().
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
In the T241 implementation of memory-bandwidth partitioning, in the absence
of contention for bandwidth, the minimum bandwidth setting can affect the
amount of achieved bandwidth. Specifically, the achieved bandwidth in the
absence of contention can settle to any value between the values of
MPAMCFG_MBW_MIN and MPAMCFG_MBW_MAX. Also, if MPAMCFG_MBW_MIN is set
zero (below 0.78125%), once a core enters a throttled state, it will never
leave that state.
The first issue is not a concern if the MPAM software allows to program
MPAMCFG_MBW_MIN through the sysfs interface. This patch ensures program
MBW_MIN=1 (0.78125%) whenever MPAMCFG_MBW_MIN=0 is programmed.
In the scenario where the resctrl doesn't support the MBW_MIN interface via
sysfs, to achieve bandwidth closer to MBW_MAX in the absence of contention,
software should configure a relatively narrow gap between MBW_MIN and
MBW_MAX. The recommendation is to use a 5% gap to mitigate the problem.
Clear the feature MBW_MIN feature from the class to ensure we don't
accidentally change behaviour when resctrl adds support for a MBW_MIN
interface.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAM bandwidth partitioning controls will not be correctly configured,
and hardware will retain default configuration register values, meaning
generally that bandwidth will remain unprovisioned.
To address the issue, follow the below steps after updating the MBW_MIN
and/or MBW_MAX registers.
- Perform 64b reads from all 12 bridge MPAM shadow registers at offsets
(0x360048 + slice*0x10000 + partid*8). These registers are read-only.
- Continue iterating until all 12 shadow register values match in a loop.
pr_warn_once if the values fail to match within the loop count 1000.
- Perform 64b writes with the value 0x0 to the two spare registers at
offsets 0x1b0000 and 0x1c0000.
In the hardware, writes to the MPAMCFG_MBW_MAX MPAMCFG_MBW_MIN registers
are transformed into broadcast writes to the 12 shadow registers. The
final two writes to the spare registers cause a final rank of downstream
micro-architectural MPAM registers to be updated from the shadow copies.
The intervening loop to read the 12 shadow registers helps avoid a race
condition where writes to the spare registers occur before all shadow
registers have been updated.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
The MPAM specification includes the MPAMF_IIDR, which serves to uniquely
identify the MSC implementation through a combination of implementer
details, product ID, variant, and revision. Certain hardware issues/errata
can be resolved using software workarounds.
Introduce a quirk framework to allow workarounds to be enabled based on the
MPAMF_IIDR value.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Co-developed-by: James Morse <james.morse@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Enough MPAM support is present to enable ARCH_HAS_CPU_RESCTRL. Let it
rip^Wlink!
ARCH_HAS_CPU_RESCTRL indicates resctrl can be enabled. It is enabled by the
arch code simply because it has 'arch' in its name.
This removes ARM_CPU_RESCTRL as a mimic of X86_CPU_RESCTRL. While here,
move the ACPI dependency to the driver's Kconfig file.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
A few resctrl features and hooks need to be provided, but aren't needed or
supported on MPAM platforms.
resctrl has individual hooks to separately enable and disable the
closid/partid and rmid/pmg context switching code. For MPAM this is all the
same thing, as the value in struct task_struct is used to cache the value
that should be written to hardware. arm64's context switching code is
enabled once MPAM is usable, but doesn't touch the hardware unless the
value has changed.
For now event configuration is not supported, and can be turned off by
returning 'false' from resctrl_arch_is_evt_configurable().
The new io_alloc feature is not supported either, always return false from
the enable helper to indicate and fail the enable.
Add this, and empty definitions for the other hooks.
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Tested-by: Jesse Chick <jessechick@os.amperecomputing.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
