During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops
the MMCX rail to MIN_SVS while the core clock frequency remains at its
original (highest) rate. When runtime resume re-enables the clock, this
may result in a mismatch between the rail voltage and the clock rate.
For example, in the DPU bind path, the sequence could be:
cpu0: dev_sync_state -> rpmhpd_sync_state
cpu1: dpu_kms_hw_init
timeline 0 ------------------------------------------------> t
After rpmhpd_sync_state, the voltage performance is no longer guaranteed
to stay at the highest level. During dpu_kms_hw_init, calling
dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to
fall to MIN_SVS while the core clock is still at its maximum frequency.
When the power is re-enabled, only the clock is enabled, leading to a
situation where the MMCX rail is at MIN_SVS but the core clock is at its
highest rate. In this state, the rail cannot sustain the clock rate,
which may cause instability or system crash.
Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend
to ensure the correct vote is restored when DPU resumes.
Fixes: b0530eb119 ("drm/msm/dpu: Use OPP API to set clk/perf state")
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/710077/
Link: https://lore.kernel.org/r/20260309063720.13572-1-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add MDSS/MDP display subsystem for Qualcomm Eliza SoC, being overall a
minor revision change against SM8750, but coming with few different
components, like different DSI PHY, missing DP1 and added HDMI.
The binding does not include HDMI description yet.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708878/
Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-5-ea0579f62358@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add DSI PHY 4nm v5.2.4 for the Qualcomm Eliza SoC, fully compatible with
SM8650. Note that this DSI PHY, unlike the Eliza MDSS DSI, is not
compatible with SM8750.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/708866/
Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-2-ea0579f62358@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add DisplayPort controller for Qualcomm Eliza SoC fully compatible with
SM8650. The device looks very similar to SM8750 (same DP TX block
v1.5.1) but with a differences in DP PHY: Eliza and SM8650 use DP PHY
4nm v7.0, SM8750 uses 3nm v8.0.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/708864/
Link: https://lore.kernel.org/r/20260304-drm-display-eliza-v2-1-ea0579f62358@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
To the best of my knowledge, the v1 version of this SoC had been
superseded before any device was released on the market. Everywhere
else in the kernel, there are assumptions about the SoC being revision
2 or the later MSM8974PRO.
Remove the config for that flavor of MDP. To bring the naming in line
with the rest of the kernel, remove the v2 suffix from the remaining
config.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708112/
Link: https://lore.kernel.org/r/20260302-topic-goodnight_8974v1-v1-1-e0006f7a0526@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The drm/msm module bundles several drivers, each of them having a
separate OF match table, however only MDSS (subsystem), KMS devices and
GPU have corresponding MODULE_DEVICE_ID tables.
Add MODULE_DEVICE_ID to the display-related driver and to all other
drivers in this module, simplifying userspace job.
Fixes: 060530f1ea ("drm/msm: use componentised device support")
Reported-by: Loïc Minier <loic.minier@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/707960/
Link: https://lore.kernel.org/r/20260228-msm-device-id-v2-1-24b085919444@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Turn on the switch and use virtual planes by default, enhancing
utilisation of the display pipelines. It is still possible to use legacy
implementation by using `msm.dpu_use_virtual_planes=false` kernel boot
parameter.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455,
Patchwork: https://patchwork.freedesktop.org/patch/707437/
Link: https://lore.kernel.org/r/20260226-dpu-enable-virt-planes-v2-1-87971236fe86@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Move the CNP PCH clock gating programming into
intel_pch_init_clock_gating() and switch the corresponding
CFL/CML caller to the display-specific code.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-5-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Move the LPT PCH clock gating programming into
intel_pch_init_clock_gating() and switch the corresponding
Haswell/Broadwell callers to the display-specific code.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-4-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Move the CPT PCH clock gating programming into
intel_pch_init_clock_gating() and switch the corresponding IVB callers
to the display-specific code.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-3-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add a new function in the display code to help initialize clock-gating
without reading display PCH registers directly from non-display code.
This adds a mini-framework to deal with display-specific PCH registers
and uses it for IBX as a start.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260324080441.154609-2-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
EcoNet EN751221 clock/reset driver is significantly similar to the
EN7523 / EN7581, however the EN751221 does not have a neat batch of clock
divider registers so there are fewer known clocks, and the frequency of
each clock is derived differently. This clock driver will probably work
correctly on EN751627, EN7528, and EN7580.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock and reset bindings for EN751221 as well as a "chip-scu" which is
an additional regmap that is used by the clock driver as well as others.
This split of the SCU across two register areas is the same as the Airoha
AN758x family.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The print_scx_info() always output scx_root structure's->ops.name,
but for built with CONFIG_EXT_SUB_SCHED=y kernels, the tasks may be
attach an sub scx_sched structure. this commit therefore use the
scx_task_sched_rcu() to correctly get scx_sched structure to output
ops.name, and drop state check.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
Guard notation simplifies code.
Also stop trying to check if input device is opened/in use in the
interrupt handler - the interrupt is disabled when device is closed or
suspended.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Using guard notation makes the code more compact and error handling
more robust by ensuring that locks are released in all code paths
when control leaves critical section.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use __free(fwnode_handle) cleanup facility to ensure that references to
acquired fwnodes are dropped at appropriate times automatically.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Do not define or use iqs5xx_ihex_rec structure: the original code was
using just a couple of fields in it and instead used it to calculate
offset to record data. The data field was actually reserving space for
checksum.
Instead iterate through fields and advance pointer explicitly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Note that callers of exc3000_vendor_data_request() always expect
response, so it was adjusted to always wait for it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Guard notation simplifies code.
Also fix the touchscreen not being marked as suspended when noone has
opened/is using it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
