Fix IOMMU DT propeties for GPU, display and video peripherals via
dropping SMMU stream IDs which relates to secure context bank.
This problem only surfaced when the Gunyah based firmware stack is
ported on Agatti replacing the legacy QHEE based firmware stack. Assigning
Linux kernel (HLOS) VMID to secure context bank stream IDs is treated
as a fault by Gunyah hypervisor which were previously ignored by QHEE
hypervisor.
The DT changes should be backwards compatible with legacy QHEE based
firmware stack too.
Suggested-by: Prakash Gupta <guptap@qti.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260122121042.579270-4-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix IOMMU DT propety for venus via dropping SMMU stream IDs which
relates to secure context bank. Assigning Linux kernel (HLOS) VMID
to secure context bank stream IDs is incorrect. The maximum value
for iommus property is updated accordingly.
These DT bindings changes should be backwards compatible.
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122121042.579270-3-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix IOMMU DT propety for display via dropping SMMU stream IDs which
relates to secure context bank. Assigning Linux kernel (HLOS) VMID
to secure context bank stream IDs is incorrect. The maximum value
for iommus property is updated accordingly.
These DT bindings changes should be backwards compatible.
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260122121042.579270-2-sumit.garg@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MDSS resets have so far been left undescribed. Fix that.
Fixes: dd3d066221 ("clk: qcom: Add display clock controller driver for SC7180")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # sc7180-ecs-liva-qc710
Link: https://lore.kernel.org/r/20260120-topic-7180_dispcc_bcr-v1-2-0b1b442156c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the addition of reset constants to the SC7180 display clock
controller through a topic branch, in order to make them available to
the DeviceTree branch as well.
The MDSS resets have so far been left undescribed. Fix that.
Fixes: 75616da712 ("dt-bindings: clock: Introduce QCOM sc7180 display clock bindings")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # sc7180-ecs-liva-qc710
Link: https://lore.kernel.org/r/20260120-topic-7180_dispcc_bcr-v1-1-0b1b442156c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
r-spi has DRQs for both the main and MCU DMA controllers on the A523 SoC
family, however it seems it that it is mainly routed to the MCU DMA
controller, with no obvious way to change it.
Change the DMA channels of r-spi to the MCU so that it works properly.
Fixes: 1bec3bd1f8 ("arm64: dts: allwinner: sun55i: Add SPI controllers")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260323171927.1256507-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The io_uring_zerocopy.sh kselftest assumes that io_uring support is
enabled on the host system. When io_uring is disabled via the
kernel.io_uring_disabled sysctl, the test fails.
Explicitly enable io_uring for the test by setting
kernel.io_uring_disabled=0.
Save the original value of kernel.io_uring_disabled before changing
it and restore it in cleanup handler to ensure the system state is
restored regardless of test outcome.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Link: https://patch.msgid.link/20260321215908.175465-5-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reuseport_* tests (bpf, bpf_cpu, bpf_numa, dualstack) currently use
a fixed port range. This can cause intermittent test failures when the
ports are already in use by other services:
failed to bind receive socket: Address already in use
To avoid conflicts, run these tests in separate network namespaces using
unshare. Each test now has its own isolated network stack, preventing
port collisions with the host services.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Link: https://patch.msgid.link/20260321215908.175465-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the generic power control driver module since it's required
to power up the PCIe USB3 controller found on the Ayaneo Pocket S2
gaming console.
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20260319-topic-sm8650-ayaneo-pocket-s2-base-v6-1-797bf96df771@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Allison Henderson says:
====================
selftests: rds: add config file and config.sh -c option
This series adds an RDS-specific config file for ksft CI and extends
config.sh with a -c flag to specify an alternate config file path.
Users can now specify the path of the config they want to update, or
default to .config if none is specified.
====================
Link: https://patch.msgid.link/20260320041834.2761069-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new -c flag to config.sh that enables callers
to specify the file path of the config they would like to update.
If no config is specified, the default will be the .config of the
current directory.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260320041834.2761069-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksft CI runtime needs an rds specific config file to build a
minimal kernel with the right options enabled. This patch adds
an rds selftest config containing the required CONFIG_RDS* and
CONFIG_NET_* options.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260320041834.2761069-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest to reproduce the infinite recursion in bond_header_parse()
when bonds are stacked (bond1 -> bond0 -> gre). When a packet is received
via AF_PACKET SOCK_DGRAM on the topmost bond, dev_parse_header() calls
bond_header_parse() which used skb->dev (always the topmost bond) to get
the bonding struct. This caused it to recurse back into itself
indefinitely, leading to stack overflow.
Before commit b7405dcf73 ("bonding: prevent potential infinite loop
in bond_header_parse()"), the test triggers:
./bond_stacked_header_parse.sh
[ 71.999481] BUG: MAX_LOCK_DEPTH too low!
[ 72.000170] turning off the locking correctness validator.
[ 72.001029] Please attach the output of /proc/lock_stat to the bug report
[ 72.002079] depth: 48 max: 48!
...
After the fix, everything works fine:
./bond_stacked_header_parse.sh
TEST: Stacked bond header_parse does not recurse [ OK ]
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260320022245.392384-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If OCMEM is declared in DT, it is expected that it is present and
handled by the driver. The GPU driver will ignore -ENODEV error, which
typically means that OCMEM isn't defined in DT. Let ocmem return
-EPROBE_DEFER if it supposed to be used, but it is not probed (yet).
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260323-ocmem-v1-3-ad9bcae44763@oss.qualcomm.com
[bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Instead of printing messages to the dmesg, let the message be recorded
as a reason for the OCMEM client deferral.
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260323-ocmem-v1-2-ad9bcae44763@oss.qualcomm.com
[bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
OCMEM's core clock (aka RPM bus 2 clock) is being handled internally by
the interconnect driver. Corresponding clock has been dropped from the
SMD RPM clock driver. The users of the ocmem will vote on the ocmemnoc
interconnect paths, making sure that ocmem is on. Make the clock
optional, keeping it for compatibility with older DT.
Fixes: d6edc31f3a ("clk: qcom: smd-rpm: Separate out interconnect bus clocks")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260323-ocmem-v1-1-ad9bcae44763@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Recently, when testing 10-bit dsi C-PHY panel, clks are different
from the usual. (dsi0_phy_pll_out_dsiclk's parent is dsi0_pll_bit_clk
now (dsiclk_sel = 0)) And we failed to set dsiclk's children.
dsi_link_clk_set_rate_6g: Set clk rates: pclk=172992000, byteclk=108120000
byteclk was set first to 108120000, so the vco rate was set to
108120000 * 7 * 1 * 1 = 756840000. When we was trying to set
172992000 on mdss_pixel_clk_src later.
Since there was no matched ratio, we failed to set it. And dsiclk
divider ratio was set to 15:1 (wrong cached register value 0xf and
didn't update), we finally got 50455997, apparently wrong.
dsi0vco_clk 1 1 0 756839941
dsi0_pll_out_div_clk 1 1 0 756839941
dsi0_pll_post_out_div_clk 0 0 0 216239983
dsi0_pll_bit_clk 2 2 0 756839941
dsi0_phy_pll_out_dsiclk 2 2 0 50455997
disp_cc_mdss_pclk1_clk_src 1 1 0 50455997
dsi0_pll_by_2_bit_clk 0 0 0 378419970
dsi0_phy_pll_out_byteclk 2 2 0 108119991
disp_cc_mdss_byte1_clk_src 2 2 0 108119991
Downstream clk_summary shows the mdss_pixel_clk_src support the
ratio(35:16)
dsi0_phy_pll_out_dsiclk 2 2 0 378420000
disp_cc_mdss_pclk1_clk_src 1 1 0 172992000
dsi0_phy_pll_out_byteclk 2 2 0 108120000
disp_cc_mdss_byte1_clk_src 2 2 0 108120000
After checking downstream source, 15:4 also seems to be supported,
add them two.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260321095029.2259489-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All six PTP-over-IP test frames (3x IPv4 + 3x IPv6) contain incorrect
UDP checksums. The stored values are the ones-complement sums of just
the pseudo-headers, not the complete UDP checksums over pseudo-header +
UDP header + payload. This is characteristic of frames captured on the
sender before TX checksum offload completion.
For example, the IPv4 Sync and Follow-Up frames both store checksum
0xa3c8 despite having different UDP payloads and port numbers - 0xa3c8
is their shared pseudo-header sum (same src/dst IP, same protocol and
UDP length).
While most L2 switches forward frames without verifying transport
checksums, hardware that performs deep packet inspection or has PTP
awareness may validate UDP checksums and drop frames that fail
verification. This causes the 1588v2 over IPv4/IPv6 tests to fail on
such hardware even though L2 PTP (which has no UDP checksum) passes
fine.
Replace all six pseudo-header partial sums with the correctly computed
full UDP checksums:
IPv4 Sync: 0xa3c8 -> 0x9f41
IPv4 Follow-Up: 0xa3c8 -> 0xeb8a
IPv4 Peer Delay Req: 0xa2bc -> 0x9ab9
IPv6 Sync: 0x2e92 -> 0x1476
IPv6 Follow-Up: 0x2e92 -> 0xf047
IPv6 Peer Delay Req: 0xb454 -> 0x891f
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/651c3decb80023e4395ec149fd81110afa3869a1.1774067006.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, enetc_get_ringparam() only provides rx_pending and tx_pending,
but 'ethtool --show-ring' no longer displays these fields. Because the
ringparam retrieval path has moved to the new netlink interface, where
rings_fill_reply() emits the *x_pending only if the *x_max_pending values
are non-zero. So rx_max_pending and tx_max_pending to are added to
enetc_get_ringparam() to fix the issue.
Note that the maximum tx/rx ring size of hardware is 64K, but we haven't
added set_ringparam() to make the ring size configurable. To avoid users
mistakenly believing that the ring size can be increased, so set
the *x_max_pending to priv->*x_bd_count.
Fixes: e4a1717b67 ("ethtool: provide ring sizes with RINGS_GET request")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260320094222.706339-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix.
Fixes: 30fff9231f ("udp: bind() optimisation")
Reported-by: Andrew Onyshchuk <oandrew@meta.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260319181817.1901357-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Björn Töpel says:
====================
ethtool: Dynamic RSS context indirection table resizing
Some NICs (e.g. bnxt) change their RSS indirection table size based on
the queue count, because the hardware table is a shared resource. The
ethtool core locks ctx->indir_size at context creation, so drivers
have to reject channel changes when RSS contexts exist.
This series adds resize helpers and wires them up in bnxt. It also
adds tracking of the user provided indirection table size to the
ethtool core.
Patch 1 tracks the user-provided indirection table size (user_size)
in ctx->indir_user_size for non-default RSS contexts and in
dev->ethtool->rss_indir_user_size for context 0. It is set when the
indirection table is configured via netlink or ioctl, and cleared to
zero on reset-to-default.
IFF_RXFH_CONFIGURED is removed, and replaced with rss_indir_user_size.
The flag is redundant now that user_size captures the same
information.
Patch 2 adds core resize helpers:
ethtool_rxfh_indir_can_resize() - read-only validation for context 0
ethtool_rxfh_indir_resize() - fold/unfold context 0 table in place
ethtool_rxfh_ctxs_can_resize() - validate all non-default contexts
ethtool_rxfh_ctxs_resize() - resize all non-default contexts,
with locking and RSS_NTF notifications
Patch 3 uses the resize helpers in bnxt_set_channels().
Patch 4 adds HW tests in rss_drv.py (devices without dynamic table
sizing are skipped):
resize_periodic - fold/unfold with a non-default [3,2,1,0]
sub-table (user_size=4), verifying exact content preservation
(main + ctx)
resize_below_user_size_reject - periodic sub-table with user_size
between big and small device table sizes; verifies that shrinking
below user_size is rejected even when the table is periodic
(main + ctx)
resize_nonperiodic_reject - non-periodic table blocks channel
reduction, with an extra periodic context to exercise
multi-context validation (main + ctx)
resize_nonperiodic_no_corruption - failed resize leaves table
contents and channel count unchanged (main + ctx)
Running the tests:
# On real hardware
sudo NETIF=eth0 ./rss_drv.py
====================
Link: https://patch.msgid.link/20260320085826.1957255-1-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add resize tests to rss_drv.py. Devices without dynamic table sizing
are skipped via _require_dynamic_indir_size().
resize_periodic: set a periodic 4-entry table, shrink channels to
fold, grow back to unfold. Check the exact pattern is preserved. Has
main and non-default context variants.
resize_below_user_size_reject: send a periodic table with user_size
between the big and small device table sizes. Verify that shrinking
below user_size is rejected even though the table is periodic. Has
main and non-default context variants.
resize_nonperiodic_reject: set a non-periodic table (equal N), verify
that channel reduction is rejected.
resize_nonperiodic_no_corruption: verify a failed resize leaves both
the indirection table contents and the channel count unchanged.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-5-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_set_channels() previously rejected channel changes that alter the
RSS table size when RSS contexts exist, because non-default context
sizes were locked at creation.
Replace the rejection with the new resize helpers.
RSS table size only changes on P5 chips with older firmware; newer
firmware always uses the largest table size.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-4-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core locks ctx->indir_size when an RSS context is created. Some
NICs (e.g. bnxt) change their indirection table size based on the
channel count, because the hardware table is a shared resource. This
forces drivers to reject channel changes when RSS contexts exist.
Add driver helpers to resize indirection tables:
ethtool_rxfh_indir_can_resize() checks whether the default context
indirection table can be resized.
ethtool_rxfh_indir_resize() resizes the default context table in
place. Folding (shrink) requires the table to be periodic at the new
size; non-periodic tables are rejected. Unfolding (grow) replicates
the existing pattern. Sizes must be multiples of each other.
ethtool_rxfh_ctxs_can_resize() validates all non-default RSS contexts
can be resized.
ethtool_rxfh_ctxs_resize() applies the resize.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-3-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track the number of indirection table entries the user originally
provided (context 0/default as well!).
Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is
redundant now that user_size captures the same information.
Add ethtool_rxfh_indir_lost() for drivers that must reset the
indirection table.
Convert bnxt and mlx5 to use it.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to get netdev from private data pointer, so drivers won't
have to store redundant netdev in priv.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260320075605.490832-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the kconfig options for the crypto library KUnit tests appear
in the menu:
-> Library routines
-> Crypto library routines
However, this is the only content of "Crypto library routines". I.e.,
it is empty when CONFIG_KUNIT=n. This is because the crypto library
routines themselves don't have (or need to have) prompts.
Since this usually ends up as an unnecessary empty menu, let's remove
this menu and instead source the lib/crypto/tests/Kconfig file from
lib/Kconfig.debug inside the "Runtime Testing" menu:
-> Kernel hacking
-> Kernel Testing and Coverage
-> Runtime Testing
This puts the prompts alongside the ones for most of the other lib/
KUnit tests. This seems to be a much better match to how the kconfig
menus are organized.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260322032438.286296-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Update one driver that used sizeof(struct sm3_state) to use
sizeof(struct sm3_ctx) instead. Then, remove struct sm3_state and
SM3_STATE_SIZE.
This completes the replacement of struct sm3_state with struct sm3_ctx.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since the architecture-optimized SM3 code was migrated into lib/crypto/,
sm3_block_generic() is no longer called. Remove it. Then, since this
frees up the name, rename sm3_transform() to sm3_block_generic()
(matching the naming convention used in other hash algorithms).
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove include/crypto/sm3_base.h, since it's no longer used. The
corresponding logic was reimplemented in a central place in lib/crypto/.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the x86-optimized SM3 code via an x86-specific
crypto_shash algorithm, instead just implement the sm3_blocks() library
function. This is much simpler, it makes the SM3 library functions be
x86-optimized, and it fixes the longstanding issue where the
x86-optimized SM3 code was disabled by default. SM3 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Tweak the prototype of sm3_transform_avx() to match what the library
expects, including changing the block count to size_t. Note that the
assembly code actually already treated this argument as size_t.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the riscv-optimized SM3 code via a riscv-specific
crypto_shash algorithm, instead just implement the sm3_blocks() library
function. This is much simpler, it makes the SM3 library functions be
riscv-optimized, and it fixes the longstanding issue where the
riscv-optimized SM3 code was disabled by default. SM3 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Tweak the prototype of sm3_transform_zvksh_zvkb() to match what the
library expects, including changing the block count to size_t.
Note that the assembly code already treated it as size_t.
Note: to see the diff from arch/riscv/crypto/sm3-riscv64-glue.c to
lib/crypto/riscv/sm3.h, view this commit with 'git show -M10'.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized SM3 code via arm64-specific
crypto_shash algorithms, instead just implement the sm3_blocks() library
function. This is much simpler, it makes the SM3 library functions be
arm64-optimized, and it fixes the longstanding issue where the
arm64-optimized SM3 code was disabled by default. SM3 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Tweak the SM3 assembly function prototypes to match what the library
expects, including changing the block count from 'int' to 'size_t'.
sm3_ce_transform() had to be updated to access 'x2' instead of 'w2',
while sm3_neon_transform() already used 'x2'.
Remove the CFI stubs which are no longer needed because the SM3 assembly
functions are no longer ever indirectly called.
Remove the dependency on KERNEL_MODE_NEON. It was unnecessary, because
KERNEL_MODE_NEON is always enabled on arm64.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reimplement the "sm3" crypto_shash on top of the SM3 library, closely
mirroring the other hash algorithms (e.g. SHA-*).
The result, after later commits migrate the architecture-optimized SM3
code into the library as well, is that crypto/sm3.c will be the single
point of integration between crypto_shash and the actual SM3
implementations, simplifying the code.
Note: to see the diff from crypto/sm3_generic.c to crypto/sm3.c, view
this commit with 'git show -M10'.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the SM3 library. It closely mirrors the test
suites for the other cryptographic hash functions. The actual test and
benchmark logic is already in hash-test-template.h; this just wires it
up for SM3 in the usual way.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a straightforward library API for SM3, mirroring the ones for the
other hash algorithms. It uses the existing generic implementation of
SM3's compression function in lib/crypto/sm3.c. Hooks are added for
architecture-optimized implementations, which later commits will wire up
to the existing optimized SM3 code for arm64, riscv, and x86.
Note that the rationale for this is *not* that SM3 should be used, or
that any kernel subsystem currently seems like a candidate for switching
from the sm3 crypto_shash to SM3 library. (SM3, in fact, shouldn't be
used. Likewise you shouldn't use MD5, SHA-1, RC4, etc...)
Rather, it's just that this will simplify how the kernel's existing SM3
code is integrated and make it much easier to maintain and test. SM3 is
one of the only hash algorithms with arch-optimized code that is still
integrated in the old way. By converting it to the new lib/crypto/ code
organization, we'll only have to keep track of one way of doing things.
The library will also get a KUnit test suite (as usual for lib/crypto/),
so it will become more easily and comprehensively tested as well.
Skip adding functions for HMAC-SM3 for now, though. There's not as much
point in adding those right now.
Note: similar to the other hash algorithms, the library API uses
'struct sm3_ctx', not 'struct sm3_state'. The existing 'struct
sm3_state' and the sm3_block_generic() function which uses it are
temporarily kept around until their users are updated by later commits.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The kconfig options for generic crypto API modules have traditionally
*not* had a "_GENERIC" suffix. Also, the "_GENERIC" suffix will make
even less sense once the architecture-optimized SM3 code is moved into
lib/crypto/ and the "sm3" crypto_shash is reimplemented on top of that.
Thus, rename CRYPTO_SM3_GENERIC to CRYPTO_SM3.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Fold sm3_init() into its caller to free up the name for use in a library
API mirroring the other hash function APIs.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
When CONFIG_FIXED_PHY=m but CONFIG_B44=y, the kernel fails to link:
ld.lld: error: undefined symbol: fixed_phy_unregister
>>> referenced by b44.c
>>> drivers/net/ethernet/broadcom/b44.o:(b44_remove_one) in archive vmlinux.a
ld.lld: error: undefined symbol: fixed_phy_register_100fd
>>> referenced by b44.c
>>> drivers/net/ethernet/broadcom/b44.o:(b44_register_phy_one) in archive vmlinux.a
The fixed phy support is small enough that just always enabling it
for b44 is the simplest solution, and it avoids adding ugly #ifdef
checks.
Fixes: 10d2f15afb ("net: b44: register a fixed phy using fixed_phy_register_100fd if needed")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260320154927.674555-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 0417adf367 ("ppp: fix race conditions in ppp_fill_forward_path")
dev_fill_forward_path() should be called with RCU read lock held. This
fix was applied to net, while the Airoha flowtable commit was applied to
net-next, so it hadn't been an issue until net was merged into net-next.
Fixes: a8bdd935d1 ("net: airoha: Add wlan flowtable TX offload")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260320094315.525126-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260320215230.3236005-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Link: https://patch.msgid.link/20260305104313.15898-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: improve PCS support
This series is the next of the three part series sorting out the PCS
support in stmmac, building on part 2:
net: stmmac: qcom-ethqos: further serdes reorganisation
Similar patches have been posted previously. This series does away with
the common SerDes PHY support, instead using a flag to indicate whether
2500Mbps mode is supported (STMMAC_FLAG_SERDES_SUPPORTS_2500M.) At this
time, I have no plans to resurect the common SerDes PHY support - the
generic PHY layer implementations are just too random to consider that,
and I certainly do not want the extra work of fixing that.
The reasoning here is that these patches should be safe to merge and
should not impact qcom-ethqos in any way.
We can then figure out how to work around qcom-ethqos hacks without
having to keep re-posting these same patches time and time again.
====================
Link: https://patch.msgid.link/abrNYVfZ1Iwff2EI@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-qcom-ethqos supports SGMII and 2500BASE-X using the integrated
PCS, so we need to expand the PCS support to include support for
BASE-X modes.
Add support to the prereset configuration to detect 2500BASE-X, and
arrange for stmmac_mac_select_pcs() to return the integrated PCS if
its supported_interfaces bitmap reports support for the interface mode.
This results in priv->hw->pcs now being write-only, so remove it.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPj-0000000DYAv-2JcZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The integrated PCS supports 802.3z (BASE-X) modes when the Synopsys
IP is coupled with an appropriate SerDes to provide the electrical
interface. The PCS presents a TBI interface to the SerDes for this.
Thus, the BASE-X related registers are only present when TBI mode is
supported.
dwmac-qcom-ethqos added support for using 2.5G with the integrated PCS
by calling dwmac_ctrl_ane() directly.
Add support for the following to the integrated PCS:
- 1000BASE-X protocol unconditionally.
- 2500BASE-X if the coupled SerDes supports 2.5G speed.
- The above without autonegotiation.
- If the PCS supports TBI, then optional BASE-X autonegotiation for each
of the above.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPe-0000000DYAp-1qpV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the link, speed and duplex for SGMII links, read from the
SGMII, RGMII and SMII status and control register.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPZ-0000000DYAj-1MdI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to describe one more register (offset and field bitmask) to
the PCS code. Move the existing PCS offset and interrupt enable bits
to a new struct and pass that in to stmmac_integrated_pcs_init().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPU-0000000DYAd-0ssk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
