Commit graph

362,520 commits

Author SHA1 Message Date
Kittipon Meesompop
cb816192d9 s390/qeth: fix using of ref counter for rxip addresses
IP-address setting and removal are delayed when the device is not yet in
state SOFTSETUP or UP. ref_counter has been implemented only for
ip-address with type normal. In this patch ref_counter logic is also used
for ip-address with type rxip to allow appropriate handling of multiple
postponed rxip add and del calls.

Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:40 -07:00
Kittipon Meesompop
ea4ae35a82 s390/qeth: fix trace-messages for deleting rxip addresses
change trace-messages:
- from addrxip4 to delrxip4
- from addrxip6 to delrxip6

Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:40 -07:00
Kittipon Meesompop
aa9bea0b08 s390/qeth: reject multicast rxip addresses
There exist different commands to add unicast and multicast addresses on
the OSA card. rxip addresses are always set as unicast addresses and
thus just unicast addresses should be allowed.

Adding a multicast address now fails and a grace message is generated.

Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:40 -07:00
Julian Wiedmann
d65626ad7c s390/qeth: extract bridgeport cmd builder
Consolidation of duplicated code, no functional change.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:40 -07:00
Julian Wiedmann
cef6ff2202 s390/net: reduce inlining
Clean up the inline cruft in s390 net drivers. Many of the inlined
functions had only one caller anyway.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:40 -07:00
Julian Wiedmann
f8eb49306d s390/qeth: make more use of skb API
Replace some open-coded parts with their proper API calls.

Also remove two skb_[re]set_mac_header() calls in the L2
xmit paths that are clearly no longer required, since at least
commit 6d1ccff627 ("net: reset mac header in dev_start_xmit()").

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:40 -07:00
Julian Wiedmann
cc309f83d1 s390/qeth: clean up fill_buffer() offset logic
For some xmit paths we pass down a data offset to qeth_fill_buffer(),
to indicate that the first k bytes of the skb should be skipped when
mapping it into buffer elements.
Commit acd9776b5c ("s390/qeth: no ETH header for outbound AF_IUCV")
recently switched the offset for the IUCV-over-HiperSockets path
from 0 to ETH_HLEN, and now we have

	device	offset
	OSA	= 0
	IQD	> 0

for all xmit paths.

OSA would previously pass down -1 from do_send_packet(), to distinguish
between 1) OSA and 2) IQD with offset 0. That's no longer needed now,
so have it pass 0, make the offset unsigned and clean up how we apply
the offset in __qeth_fill_buffer().

No change of behaviour for any of our current xmit paths.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:39 -07:00
Julian Wiedmann
384d2ef145 s390/qeth: straighten out fill_buffer() interface
1. for adjusting the buffer's next_element_to_fill in __fill_buffer(),
   just pass the full qeth_qdio_out_buffer struct
2. when adding a header element, be consistent about passing
   a hint ('is_first_elem') to __fill_buffer()

No functional change.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:39 -07:00
Julian Wiedmann
5258830bf6 s390/qeth: simplify fragment type selection
Improve readability of the code that determines a buffer element's
fragment type, and reduce the number of cases down from 5 to 3.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:39 -07:00
Julian Wiedmann
699d3fe537 s390/qeth: remove extra L3 adapterparms query
qeth_l3_setadapter_parms() queries the device for supported
adapterparms, even though they already have been queried as part of the
device's high-level setup. Remove that extra call.

The only call chain for qeth_l3_setadapter_parms() is
__qeth_l3_set_online()
	qeth_core_hardsetup_card()
		qeth_query_setadapterparms()
	qeth_l3_setadapter_parms()
		qeth_query_setadapterparms()

, and we only reach qeth_l3_setadapter_parms() if the first
adapterparms query succeeds. Hence removing the second query results in
no loss of functionality.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:39 -07:00
Julian Wiedmann
7b1115bbb7 s390/qeth: remove extra L2 adapterparms query
qeth_l2_request_initial_mac() queries the device for its supported
adapterparms, even though they already have been queried as part of the
device's high-level setup. Remove that extra call.

The only call chain for qeth_l2_request_initial_mac() is
__qeth_l2_set_online()
	qeth_core_hardsetup_card()
		qeth_query_setadapterparms()
	qeth_l2_setup_netdev()
		qeth_l2_request_initial_mac()
			qeth_query_setadapterparms()

, and we only reach qeth_l2_request_initial_mac() if the first
adapterparms query succeeds. Hence removing the second query results in
no loss of functionality.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:39 -07:00
Julian Wiedmann
886e1974dc s390/qeth: don't access skb after transmission
After transmitting a skb via send_packet[_fast](), the statistics
code accesses the skb once more to account for transmitted page frags.
This has a (theoretical?) race against the TX completion - if the TX
completion is processed and frees the skb before hard_start_xmit()
gets to the statistics part, we access random memory.

Fix this by caching the # of page frags, before the skb is transmitted.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15 10:58:39 -07:00
Derek Chickles
d396179c16 liquidio: fix issues with fw_type module parameter
The fw_type module parameter isn't showing up in the
/sys/module/liquidio/parameters directory.  Fix it by setting the read
permission bits for user, group, other in module_param_string().  Revise
the description of fw_type.  Initialize the fw_type static char array with
the default value to conform to the module parameter description.

Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:25:20 -07:00
Arkadi Sharshevsky
e6f3b379c0 mlxsw: spectrum_router: Add support for nexthop group consolidation for IPv6
Due to limited ASIC resources the maximum number of routes is limited by
the nexthop resource. In order to improve the routing scale nexthop
consolidation should be performed.

This patch adds support for IPv6 neighbor consolidation. The hash value
is calculated based on the nexthop set, by performing bitwise xor on the
ifindexs of the nexthops, in a similar way to IPv4's kernel implementation.
In case of collision a full match is performed between the sets which
include address and ifindex comparison.

Non gateway nexthop groups are not inserted to the hash table due to
lack of nexthop device (ifindex).

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:23:32 -07:00
Arkadi Sharshevsky
ba31d36669 mlxsw: spectrum_router: Prepare nexthop group's hash table for IPv6
This patch does preparation before introducing IPv6 nexthop group
consolidation. Currently the nexthop group hash table is used only by
IPv4 and uses fixed key size. In order to support the IPv6's variable
length key the current table is changed.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:23:32 -07:00
Intiyaz Basha
d18ca7df9f liquidio: added support for ethtool --set-ring feature
added support for ethtool --set-ring feature

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:40 -07:00
Intiyaz Basha
8974de1b7d liquidio: moved liquidio_setup_io_queues to lio_core.c
Moving common liquidio_setup_io_queues to lio_core.c

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:40 -07:00
Intiyaz Basha
d314ac2228 liquidio: moved liquidio_napi_poll to lio_core.c
Moving common liquidio_napi_poll to lio_core.c

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:40 -07:00
Intiyaz Basha
d1d97ee6e3 liquidio: moved liquidio_napi_drv_callback to lio_core.c
Moving common liquidio_napi_drv_callback to lio_core.c

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:40 -07:00
Intiyaz Basha
21f0888b5a liquidio: moved liquidio_push_packet to lio_core.c
Moving common liquidio_push_packet to lio_core.c

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:40 -07:00
Intiyaz Basha
69f9c60e83 liquidio: moved octeon_setup_droq to lio_core.c
Moving common octeon_setup_droq to lio_core.c

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:40 -07:00
Intiyaz Basha
25d43f182d liquidio: moved update_txq_status to lio_core.c
Moving common update_txq_status to lio_core.c

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:40 -07:00
Intiyaz Basha
e65a8ccb0d liquidio: moved wait_for_pending_requests to octeon_network.h
Moving common function wait_for_pending_requests to octeon_network.h

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 22:21:39 -07:00
Ohad Oz
a656d34a6e Change Kconfig description
This patch apply Mellanox network vendor which includes:
- Mellanox card devices: ConnectX-4, ConnectX-5 and Connect-IB cards.
- Mellanox switch device: SwitchX-2 Switch-IB, Spectrum.
Therefore rephrasing help.

Signed-off-by: Ohad Oz <ohado@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 11:18:16 -07:00
Ohad Oz
8122e08b1d Allow Mellanox switch devices to be configured if only I2C bus is set
Mellanox switches (mlxsw) supports I2C systems without PCI, in order to
give the ability to the users to use such functionality, there is need
to update Kconfig.

Signed-off-by: Ohad Oz <ohado@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 11:18:16 -07:00
Michal Simek
54161ed4ee net: phy: Use tab for indentation in Kconfig
Using tabs instead of space for indentation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 11:16:24 -07:00
Ido Schimmel
fc922bb0dd mlxsw: spectrum_router: Use one LPM tree for all virtual routers
The number of LPM trees available for lookup is much smaller than the
number of virtual routers, which are used to implement VRFs. In
addition, an LPM tree can only be used by one protocol - either IPv4 or
IPv6.

Therefore, in order to increase the number of supported virtual routers
to the maximum we need to be able to share LPM trees across virtual
routers instead of trying to find an optimized tree for each.

Do that by allocating one LPM tree for each protocol, but make sure it
will only include prefixes that are actually used, so as to not perform
unnecessary lookups.

Since changing the structure of a bound tree isn't recommended, whenever
a new tree it required, it's first created and then bound to each
virtual router, replacing the old one.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 11:14:03 -07:00
Ido Schimmel
0adb214ba2 mlxsw: spectrum_router: Pass argument explicitly
Instead of relying on the LPM tree to be assigned to the virtual router
before binding the two, lets pass it explicitly.

This will later allow us to return upon binding error instead of having
to perform a rollback of the assignment.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 11:14:03 -07:00
Ido Schimmel
cc70267008 mlxsw: spectrum_router: Return void from deletion functions
There is no point in returning a value from function whose return value
is never checked.

Even if the return value was checked, there wouldn't be anything to do
about it, as these functions are either called from error or deletion
paths.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 11:14:03 -07:00
Gustavo A. R. Silva
4db93fb8ac qlge: fix duplicated code for different branches
Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 10:58:10 -07:00
Gustavo A. R. Silva
b5e7dc4742 liquidio: fix duplicated code for different branches
Refactor code in order to avoid identical code for different branches.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 10:58:09 -07:00
Rick Farrington
da1542b01b liquidio: update debug console logging mechanism
- remove logging dependency upon global func octeon_console_debug_enabled()
- abstract debug console logging using console structure (via function ptr)
  to allow for more flexible logging

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14 10:56:57 -07:00
Arvind Yadav
f5b589488e net: ti: cpsw:: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:12:23 -07:00
Arvind Yadav
ef00df854b net: sh_eth: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:12:23 -07:00
Arvind Yadav
bef0fed4d0 net: dpaa_eth: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:12:23 -07:00
Arvind Yadav
7496bece4d can: constify platform_device_id
platform_device_id are not supposed to change at runtime. All functions
working with platform_device_id provided by <linux/platform_device.h>
work with const platform_device_id. So mark the non-const structs as
const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:12:23 -07:00
Colin Ian King
d17eb73bb7 tap: make struct tap_fops static
The structure tap_fops is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:
symbol 'tap_fops' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:10:31 -07:00
Colin Ian King
7acd432968 virtio-net: make array guest_offloads static
The array guest_offloads is local to the source and does not need to
be in global scope, so make it static. Also tweak formatting.

Cleans up sparse warnings:
symbol 'guest_offloads' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:09:49 -07:00
Sergei Shtylyov
5a7a834649 of_mdio: merge branch tails in of_phy_register_fixed_link()
Looks  like gcc isn't always able to figure  out that 3 *if* branches in
of_phy_register_fixed_link() calling fixed_phy_register() at their ends
are similar enough and thus can be merged. The "manual" merge saves 40
bytes of the object code (AArch64 gcc 4.8.5), and still saves 12 bytes
even  if gcc was able to merge the branch tails (ARM gcc 4.8.5)...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:07:26 -07:00
David Ahern
4f04256c98 net: vrf: Drop local rtable and rt6_info
The VRF cached rtable and rt6_info for local traffic are no longer
needed and actually prevent local traffic through enslaved devices.
Remove them.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:05:12 -07:00
Girish Moodalbail
653ef6a3e4 vxlan: change vxlan_[config_]validate() to use netlink_ext_ack for error reporting
The kernel log is not where users expect error messages for netlink
requests; as we have extended acks now, we can replace pr_debug() with
NL_SET_ERR_MSG_ATTR().

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 20:00:29 -07:00
Jason Wang
761876c857 tap: XDP support
This patch tries to implement XDP for tun. The implementation was
split into two parts:

- fast path: small and no gso packet. We try to do XDP at page level
  before build_skb(). For XDP_TX, since creating/destroying queues
  were completely under control of userspace, it was implemented
  through generic XDP helper after skb has been built. This could be
  optimized in the future.
- slow path: big or gso packet. We try to do it after skb was created
  through generic XDP helpers.

Test were done through pktgen with small packets.

xdp1 test shows ~41.1% improvement:

Before: ~1.7Mpps
After:  ~2.3Mpps

xdp_redirect to ixgbe shows ~60% improvement:

Before: ~0.8Mpps
After:  ~1.38Mpps

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 19:56:07 -07:00
Jason Wang
66ccbc9c87 tap: use build_skb() for small packet
We use tun_alloc_skb() which calls sock_alloc_send_pskb() to allocate
skb in the past. This socket based method is not suitable for high
speed userspace like virtualization which usually:

- ignore sk_sndbuf (INT_MAX) and expect to receive the packet as fast as
  possible
- don't want to be block at sendmsg()

To eliminate the above overheads, this patch tries to use build_skb()
for small packet. We will do this only when the following conditions
are all met:

- TAP instead of TUN
- sk_sndbuf is INT_MAX
- caller don't want to be blocked
- zerocopy is not used
- packet size is smaller enough to use build_skb()

Pktgen from guest to host shows ~11% improvement for rx pps of tap:

Before: ~1.70Mpps
After : ~1.88Mpps

What's more important, this makes it possible to implement XDP for tap
before creating skbs.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13 19:56:07 -07:00
Intiyaz Basha
aa69ff9e9c liquidio: moved ptp_enable to octeon_device structure
ptp_enable was a global static variable.  Moved this global variable to
octeon_device structure and removed extra device id check.

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 15:02:51 -07:00
Bhumika Goyal
159fe88efd mlxsw: make mlxsw_config_profile const
Make these structures const as they only stored in the profile field of
a mlxsw_driver structure, which is of type const.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:57:04 -07:00
Simon Horman
12acb133ec nfp: send control message when MAC representors are created
The firmware expects a MAC_REPR control message when a MAC representor
is created. The driver should expect a PORTMOD message to follow which
will provide the link states of the physical port associated with the MAC
representor.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:51:17 -07:00
Alexey Khoroshilov
ba6ba68f59 wan: dscc4: convert to plain DMA API
Make use the dma_*() interfaces rather than the pci_*() interfaces.

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:42:28 -07:00
Alexey Khoroshilov
6aa200058e wan: dscc4: add checks for dma mapping errors
The driver does not check if mapping dma memory succeed.
The patch adds the checks and failure handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:42:28 -07:00
Florinel Iordache
e37425c23a fsl/fman: implement several errata workarounds
Implemented workarounds for the following dTSEC Erratum:
A002, A004, A0012, A0014, A004839 on several operations
that involve MAC CFG register changes: adjust link,
rx pause frames, modify MAC address.

Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:37:36 -07:00
Dan Carpenter
720a8478b2 hns3pf: Fix some harmless copy and paste bugs
These were copy and paste bugs, but I believe they are harmless.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:31:59 -07:00