In find_reloc_by_dest_range(), hash collisions can cause a high-offset
relocation to appear when probing a low-offset hash bucket.
Only return early when the best match found so far genuinely belongs to
the current bucket (its offset is within the bucket's stride range).
Otherwise, continue scanning later buckets which may contain
lower-offset matches.
This ensures the first reloc in the range gets returned.
Fixes: 74b873e49d ("objtool: Optimize find_rela_by_dest_range()")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Use the section symbol's index instead of the old symbol's index when
updating the ELF relocation entry in convert_reloc_sym_to_secsym().
Found by Sashiko review.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Clang aggregates UBSAN type descriptors into shared anonymous
.data..L__unnamed_* sections. This data is used by UBSAN trap handlers.
When a changed function has an UBSAN bounds check, klp-diff clones the
entire UBSAN data section associated with the TU. Relocations within
the cloned section that reference named rodata objects in .rodata.cst*
(like 'exponent', 'pirq_ali_set.irqmap') become KLP relocations because
those objects now get correlated.
That results in a .klp.rela.vmlinux..data section which can easily have
thousands of KLP relocs, most of which are completely superfluous, used
by functions which aren't cloned to the patch module.
The .rodata.cst* sections are SHF_MERGE constant pool sections
containing small fixed-size data (lookup tables, bitmasks) that is only
read by value. Pointer identity is never relevant for these objects, so
correlating them is unnecessary.
Exclude .rodata.cst* objects from correlation so they get cloned as
local data instead of generating KLP relocations.
It might be possible to someday treat UBSAN data sections as special
sections, and only extract the few needed entries. But this works for
now.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
klp-diff treats all rodata as uncorrelated, so any reference to it uses
a duplicated copy rather than using a KLP reloc.
For the contents of the data itself, a duplicated copy is fine.
However, pointer comparisons (e.g., f->f_op == &foo_ops) are broken.
Fix it by correlating non-anonymous rodata objects.
Also, use a new find_symbol_containing_inclusive() helper for matching
the end of a symbol so bounds calculations don't get broken, for the
case where an array or other symbol's ending address is used as part of
a bounds calculation.
While these are really two distinct changes, they need to be done in the
same patch so as to avoid introducing bisection regressions.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Inline section_reference_needed() and is_reloc_allowed() into
convert_reloc_sym() and remove the redundant is_reloc_allowed() check in
clone_reloc().
Move the is_sec_sym() checks into the convert callees so they become
no-ops when the reloc is already in the right format. This allows
convert_reloc_sym() to unconditionally dispatch to the right converter
based on section type.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Move the sec->rodata marking from check.c to elf.c so it's set during
ELF reading rather than during the check pipeline. This makes the
rodata flag available to all objtool users, including klp-diff which
reads ELF files directly without running check().
Add an is_rodata_sec() helper to elf.h for consistency with
is_text_sec() and is_string_sec().
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Objtool has some hacks which NOP out certain calls/jumps and replace
their relocations with R_X86_64_NONE. The klp-diff relocation
extraction code will error out when trying to copy these relocations due
to their negative addend, which would only makes sense for a PC-relative
branch instruction. Just ignore them.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
.kcfi_traps contains references to kCFI trap instruction locations.
When a KCFI type check fails at an indirect call, the trap handler looks
up the faulting address in this section.
Add it to the special sections list so the entries get extracted for the
changed functions they reference.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Objtool is failing to extract text annotations which reference
.altinstr_replacement instructions:
1) Alternative replacement fake symbols are NOTYPE rather than FUNC,
and they don't have sym->included set, thus they aren't recognized
by should_keep_special_sym().
2) .discard.annotate_insn gets processed before .altinstr_replacement,
so the referenced (fake) symbols don't have clones yet.
Fix the first issue by checking for a valid clone instead of
sym->included and by accepting NOTYPE symbols when processing
.discard.annotate_insn.
Fix the second issue by deferring text annotation processing until after
the other special sections have been cloned.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The XXH3 state allocated in checksum_init() is never freed. Free it in
checksum_finish().
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Fix NULL dereference when cloning a symbol from an empty section.
sec->data is only populated for sections with non-zero size.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
When a section is empty (e.g. only zero-length alternative
replacements), there are no symbols to convert a section symbol
reference to. Skip the reloc instead of erroring out.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
find_symbol_by_name() only returns the first match, so
--debug-checksum=<func> silently ignores any subsequent duplicately
named functions after the first.
Fix that, along with a new for_each_sym_by_name() helper.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Convert the callback-based iterate_sym_by_demangled_name() with a new
for_each_sym_by_demangled_name() macro. This eliminates the callback
struct/function and makes the code more compact and readable.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
create_fake_symbols() has two phases: creating symbols from
ANNOTATE_DATA_SPECIAL entries, and a fallback that uses sh_entsize for
special sections like .static_call_sites.
When .discard.annotate_data is absent, the function returns early,
skipping the entsize fallback and silently allowing unsupported
module-local static call keys through.
Fix it by jumping to the entsize phase instead of returning early.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Assisted-by: Claude:claude-4-opus
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Clang emits various .L-prefixed local symbols beyond .Ltmp*, such as
.L__const.* for local constant data. These are assembler-local labels
not present in kallsyms, so they can never be resolved at module load
time.
Broaden the check from .Ltmp* to all .L* symbols so they get cloned into
the patch module instead.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Clang LTO uses __UNIQUE_ID() to generate some uniquely named wrapper
functions, like initstubs. If they're uncorrelated, prevent them from
being reported as new functions and included unnecessarily.
Note that dont_correlate() already includes prefix functions, so prefix
functions are still being ignored here.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
With LTO, the initcall infrastructure generates __initstub__kmod_*
wrapper functions in .init.text. These are the LTO equivalent of
__initcall__kmod_* data pointers, which are already excluded from
correlation.
These are __init functions whose memory is freed after boot, so there's
no reason to include or reference them in a livepatch module.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Some arch/x86/crypto/*.S files define local .set/.equ constants that get
duplicated in vmlinux.o. This causes klp-diff to fail with "Multiple
correlation candidates" errors since it can't uniquely match these
between orig and patched builds.
Skip ABS symbols in dont_correlate(). They're purely compile-time
assembly constants that are never referenced by relocations, so they
don't need correlation.
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Symbols created by __ADDRESSABLE() are only used to convince the
toolchain not to optimize out the referenced symbol.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
While there was once a section named .data.once, it has since been
renamed to .data..once with commit dbefa1f31a ("Rename .data.once to
.data..once to fix resetting WARN*_ONCE"). Fix it.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
For naming function-local static locals, GCC uses <var>.<id>, e.g.
__already_done.15, while Clang uses <func>.<var> with optional .<id>,
e.g. create_worker.__already_done.111
The existing is_uncorrelated_static_local() check only matches the GCC
convention where the variable name is a prefix. Handle both cases by
checking for a prefix match (GCC) and by checking after the first dot
separator (Clang).
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
This series cleans up some of the special user copy functions naming and
semantics. In particular, get rid of the (very traditional) double
underscore names and behavior: the whole "optimize away the range check"
model has been largely excised from the other user accessors because
it's so subtle and can be unsafe, but also because it's just not a
relevant optimization any more.
To do that, a couple of drivers that misused the "user" copies as kernel
copies in order to get non-temporal stores had to be fixed up, but that
kind of code should never have been allowed anyway.
The x86-only "nocache" version was also renamed to more accurately
reflect what it actually does.
This was all done because I looked at this code due to a report by Jann
Horn, and I just couldn't stand the inconsistent naming, the horrible
semantics, and the random misuse of these functions. This code should
probably be cleaned up further, but it's at least slightly closer to
normal semantics.
I had a more intrusive series that went even further in trying to
normalize the semantics, but that ended up hitting so many other
inconsistencies between different architectures in this area (eg
'size_t' vs 'unsigned long' vs 'int' as size arguments, and various
iovec check differences that Vasily Gorbik pointed out) that I ended up
with this more limited version that fixed the worst of the issues.
Reported-by: Jann Horn <jannh@google.com>
Tested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=wgg1QVWNWG-UCFo1hx0zqrPnB3qhPzUTrWNft+MtXQXig@mail.gmail.com/
* nocache-cleanup:
x86-64/arm64/powerpc: clean up and rename __copy_from_user_flushcache
x86: rename and clean up __copy_from_user_inatomic_nocache()
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reorder the ORC register values so their ordering matches the x86
instruction set register encodings.
No functional change intended.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The elf_create_file() function fails with EINVAL when the build directory
path is long enough to truncate the "XXXXXX" suffix in the 256-byte
tmp_name buffer.
Simplify the code to remove the unnecessary dirname()/basename() split
and concatenation. Instead, allocate the exact number of bytes needed for
the path.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260310203751.1479229-3-joe.lawrence@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Commit 356e4b2f5b ("objtool: Fix data alignment in elf_add_data()")
corrected the alignment of data within a section (honoring the section's
sh_addralign). Apply the same alignment when klp-diff mode clones a
symbol, adjusting the new symbol's offset for the output section's
sh_addralign.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260310203751.1479229-2-joe.lawrence@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Allow correlating original locals to patched globals, and vice versa.
This is needed when:
1. User adds/removes "static" for a function.
2. CONFIG_LTO_CLANG_THIN promotes local functions and objects to global
and add .llvm.<hash> suffix.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260305231531.3847295-8-song@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
correlate_symbols() will always try to match full name first. If there is
no match, try match only demangled_name.
In very rare cases, it is possible to have multiple foo.llvm.<hash> in
the same kernel. Whenever there is ambiguity like this, fail the klp diff.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260305231531.3847295-7-song@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
With CONFIG_LTO_CLANG_THIN, it is possible to have global __UNIQUE_ID,
such as:
FUNC GLOBAL HIDDEN 19745 __UNIQUE_ID_quirk_amd_nb_node_458
Also demangle global objects.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260305231531.3847295-5-song@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
For klp-build with LTO, it is necessary to correlate demangled symbols,
e.g., correlate foo.llvm.<num 1> and foo.llvm.<num 2>. However, these two
symbols do not have the same str_hash(name). To be able to correlate the
two symbols, calculate hash based on demanged_name, so that these two
symbols have the same hash.
No functional changes intended.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260305231531.3847295-4-song@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
With CONFIG_LTO_CLANG_THIN, it is possible to have nested __UNIQUE_ID_,
such as:
__UNIQUE_ID_addressable___UNIQUE_ID_pci_invalid_bar_694_695
To remove both trailing numbers, also remove trailing '_'.
Also add comments to demangle_name().
Signed-off-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260305231531.3847295-3-song@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
find_global_symbol_by_name() already compares names of the two symbols,
so there is no need to compare them again.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20260305231531.3847295-2-song@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Commit 25eac74b6b ("objtool: Add section/symbol type helpers")
introduced several helper macros to improve code readability.
Update the remaining open-coded checks in check.c, disas.c, elf.c,
and klp-diff.c to use these new helpers.
Signed-off-by: Wentong Tian <tianwentong2000@gmail.com>
Link: https://patch.msgid.link/20260122144404.40602-1-tianwentong2000@gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Any data added to a section needs to be aligned in accordance with the
section's sh_addralign value. Particularly strings added to a .str1.8
section. Otherwise you may get some funky strings.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Link: https://patch.msgid.link/d962fc0ca24fa0825cca8dad71932dccdd9312a9.1772681234.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Previously, HAVE_XXHASH is tested by invoking HOSTCC without HOSTCFLAGS.
Consider the following scenario:
- The host machine has libxxhash installed
- We build the kernel with HOSTCFLAGS containing a --sysroot that does
not have xxhash.h (for hermetic builds)
In this case, HAVE_XXHASH is set to y, but when it builds objtool with
HOSTCFLAGS, because the --sysroot does not contain xxhash.h, the
following error is raised:
<...>/common/tools/objtool/include/objtool/checksum_types.h:12:10: fatal error: 'xxhash.h' file not found
12 | #include <xxhash.h>
| ^~~~~~~~~~
To resolve the error, we test HAVE_XXHASH by invoking HOSTCC with
HOSTCFLAGS.
Signed-off-by: HONG Yifan <elsk@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260303010340.306164-1-elsk@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Patching a function which references a static key living in a kernel
module is unsupported due to ordering issues inherent to late module
patching:
1) Load a livepatch module which has a __jump_table entry which needs
a klp reloc to reference static key K which lives in module M.
2) The __jump_table klp reloc does *not* get resolved because module M
is not yet loaded.
3) jump_label_add_module() corrupts memory (or causes a panic) when
dereferencing the uninitialized pointer to key K.
validate_special_section_klp_reloc() intends to prevent that from ever
happening by catching it at build time. However, it incorrectly assumes
the special section entry's reloc symbol references have already been
converted from section symbols to object symbols, causing the validation
to miss corruption in extracted static branch/call table entries.
Make sure the references have been properly converted before doing the
validation.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Reported-by: Song Liu <song@kernel.org>
Reviewed-and-tested-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/124ad747b751df0df1725eff89de8332e3fb26d6.1770759954.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The difference between 'make clean' and 'make mrproper' is documented in
'make help' as:
clean - Remove most generated files but keep the config and
enough build support to build external modules
mrproper - Remove all generated files + config + various backup files
After commit 68b4fe32d7 ("kbuild: Add objtool to top-level clean
target"), running 'make clean' then attempting to build an external
module with the resulting build directory fails with
$ make ARCH=x86_64 O=build clean
$ make -C build M=... MO=...
...
/bin/sh: line 1: .../build/tools/objtool/objtool: No such file or directory
as 'make clean' removes the objtool binary.
Split the objtool clean target into mrproper and clean like Kbuild does
and remove all generated artifacts with 'make clean' except for the
objtool binary, which is removed with 'make mrproper'. To avoid a small
race when running the objtool clean target through both objtool_mrproper
and objtool_clean when running 'make mrproper', modify objtool's clean
up find command to avoid using find's '-delete' command by piping the
files into 'xargs rm -f' like the rest of Kbuild does.
Cc: stable@vger.kernel.org
Fixes: 68b4fe32d7 ("kbuild: Add objtool to top-level clean target")
Reported-by: Michal Suchanek <msuchanek@suse.de>
Closes: https://lore.kernel.org/20260225112633.6123-1-msuchanek@suse.de/
Reported-by: Rainer Fiebig <jrf@mailbox.org>
Closes: https://lore.kernel.org/62d12399-76e5-3d40-126a-7490b4795b17@mailbox.org/
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260227-avoid-objtool-binary-removal-clean-v1-1-122f3e55eae9@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0.
- Fix 'objtool' warning for Rust 1.84.0.
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0.
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate).
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust 1.95.0.
-----BEGIN PGP SIGNATURE-----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=DOG1
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
- Ensure tools/objtool is cleaned by 'make clean' and 'make mrproper'
- Fix test program for CONFIG_CC_CAN_LINK to avoid a warning, which is
made fatal by -Werror
- Drop explicit LZMA parallel compression in scripts/make_fit.py
- Several fixes for commit 62089b8048 ("kbuild: rpm-pkg: Generate
debuginfo package manually")
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaZYm2AAKCRAdayaRccAa
lg5gAP0aeqyRzFjCAcle4vDqh1bLIY3+RxMgL4/d25tJfq+01wEAlvrLWdDl0eh8
RdncqkIWNQA8YwlQDDVO0K1wcu+Mzw4=
=CoUD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Ensure tools/objtool is cleaned by 'make clean' and 'make mrproper'
- Fix test program for CONFIG_CC_CAN_LINK to avoid a warning, which is
made fatal by -Werror
- Drop explicit LZMA parallel compression in scripts/make_fit.py
- Several fixes for commit 62089b8048 ("kbuild: rpm-pkg: Generate
debuginfo package manually")
* tag 'kbuild-fixes-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: rpm-pkg: Disable automatic requires for manual debuginfo package
kbuild: rpm-pkg: Fix manual debuginfo generation when using .src.rpm
kernel: rpm-pkg: Restore find-debuginfo.sh approach to -debuginfo package
kbuild: rpm-pkg: Restrict manual debug package creation
scripts/make_fit.py: Drop explicit LZMA parallel compression
kbuild: Fix CC_CAN_LINK detection
kbuild: Add objtool to top-level clean target
