Netfslib needs to be able to handle kernel-initiated asynchronous DIO that
is supplied with a bio_vec[] array. Currently, because of the async flag,
this gets passed to netfs_extract_user_iter() which throws a warning and
fails because it only handles IOVEC and UBUF iterators. This can be
triggered through a combination of cifs and a loopback blockdev with
something like:
mount //my/cifs/share /foo
dd if=/dev/zero of=/foo/m0 bs=4K count=1K
losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0
echo hello >/dev/loop2046
This causes the following to appear in syslog:
WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs]
and the write to fail.
Fix this by removing the check in netfs_unbuffered_write_iter_locked() that
causes async kernel DIO writes to be handled as userspace writes. Note
that this change relies on the kernel caller maintaining the existence of
the bio_vec array (or kvec[] or folio_queue) until the op is complete.
Fixes: 153a9961b5 ("netfs: Implement unbuffered/DIO write support")
Reported-by: Nicolas Baranger <nicolas.baranger@3xo.fr>
Closes: https://lore.kernel.org/r/fedd8a40d54b2969097ffa4507979858@3xo.fr/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/608725.1736275167@warthog.procyon.org.uk
Tested-by: Nicolas Baranger <nicolas.baranger@3xo.fr>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Steve French <smfrench@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour.
Fixes: 546ea84d07 ("sched: sch_cake: fix bulk flow accounting logic for host fairness")
Reported-by: syzbot+f63600d288bfb7057424@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250107120105.70685-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ3/zQwAKCRCRxhvAZXjc
oucWAQCggue6avf84aT1kOugdMR+7TRp3OFnvnb5EYKnJNwOgQEAl+kmIHTZRU4F
o9cUdjfyPDSha+03owHtPJdXZ7mdOwY=
=ISxi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ3/2ggAKCRCRxhvAZXjc
omqsAQDuLR/Yw0Tt73iTic5gJlupnKdcBXL+RPtrdnvRZD2IHAEAzINwYp7T3ujT
MYC/gey8ppgsDKd9FkN0WZdThBjBlAc=
=0LOi
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.14-rc7.mount.fixes'
Bring in the fix for the mount namespace rbtree. It is used as the base
for the vfs mount work for this cycle and so shouldn't be applied
directly.
Signed-off-by: Christian Brauner <brauner@kernel.org>
While the ida does use the xarray internally we can use it explicitly
which allows us to increment the unique mount id under the xa lock.
This allows us to remove the atomic as we're now allocating both ids in
one go.
Link: https://lore.kernel.org/r/20241217-erhielten-regung-44bb1604ca8f@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Christian Brauner <brauner@kernel.org> says:
Currently we take the read lock when looking for a mount namespace to
list mounts in. We can make this lockless. The simple search case can
just use a sequence counter to detect concurrent changes to the rbtree.
For walking the list of mount namespaces sequentially via nsfs we keep a
separate rcu list as rb_prev() and rb_next() aren't usable safely with
rcu.
Since creating mount namespaces is a relatively rare event compared with
querying mounts in a foreign mount namespace this is worth it. Once
libmount and systemd pick up this mechanism to list mounts in foreign
mount namespaces this will be used very frequently.
* patches from https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-0-6e3cdaf9b280@kernel.org:
samples: add test-list-all-mounts
selftests: remove unneeded include
selftests: add tests for mntns iteration
seltests: move nsfs into filesystems subfolder
fs: simplify rwlock to spinlock
fs: lockless mntns lookup for nsfs
rculist: add list_bidir_{del,prev}_rcu()
fs: lockless mntns rbtree lookup
fs: add mount namespace to rbtree late
mount: remove inlude/nospec.h include
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-0-6e3cdaf9b280@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
We already made the rbtree lookup lockless for the simple lookup case.
However, walking the list of mount namespaces via nsfs still happens
with taking the read lock blocking concurrent additions of new mount
namespaces pointlessly. Plus, such additions are rare anyway so allow
lockless lookup of the previous and next mount namespace by keeping a
separate list. This also allows to make some things simpler in the code.
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-5-6e3cdaf9b280@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently there is no primitive for retrieving the previous list member.
To do this we need a new deletion primitive that doesn't poison the prev
pointer and a corresponding retrieval helper. Note that it is not valid
to ues both list_del_rcu() and list_bidir_del_rcu() on the same list.
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-4-6e3cdaf9b280@kernel.org
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently we use a read-write lock but for the simple search case we can
make this lockless. Creating a new mount namespace is a rather rare
event compared with querying mounts in a foreign mount namespace. Once
this is picked up by e.g., systemd to list mounts in another mount in
it's isolated services or in containers this will be used a lot so this
seems worthwhile doing.
Link: https://lore.kernel.org/r/20241213-work-mount-rbtree-lockless-v3-3-6e3cdaf9b280@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Jeff Layton <jlayton@kernel.org> says:
We had some recent queries internally asking how to use the new
statmount() and listmount() interfaces. I was doing some other work in
this area, so I whipped up this tool.
My hope is that this will represent something of a "rosetta stone" for
how to translate between mountinfo and statmount(), and an example for
other people looking to use the new interfaces.
It may also be possible to use this as the basis for a listmount() and
statmount() testcase. We can call this program, and compare its output
to the mountinfo file.
The second patch adds security mount options to the existing mnt_opts in
the statmount() interface, which I think is the final missing piece
here. The alternative to doing that would be to add a new string field
for that, but I'm not sure that's worthwhile.
* patches from https://lore.kernel.org/r/20241115-statmount-v2-0-cd29aeff9cbb@kernel.org:
fs: prepend statmount.mnt_opts string with security_sb_mnt_opts()
samples: add a mountinfo program to demonstrate statmount()/listmount()
Link: https://lore.kernel.org/r/20241115-statmount-v2-0-cd29aeff9cbb@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently these mount options aren't accessible via statmount().
The read handler for /proc/#/mountinfo calls security_sb_show_options()
to emit the security options after emitting superblock flag options, but
before calling sb->s_op->show_options.
Have statmount_mnt_opts() call security_sb_show_options() before
calling ->show_options.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241115-statmount-v2-2-cd29aeff9cbb@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move mnt->mnt_node into the union with mnt->mnt_rcu and mnt->mnt_llist
instead of keeping it with mnt->mnt_list. This allows us to use
RB_CLEAR_NODE(&mnt->mnt_node) in umount_tree() as well as
list_empty(&mnt->mnt_node). That in turn allows us to remove MNT_ONRB.
This also fixes the bug reported in [1] where seemingly MNT_ONRB wasn't
set in @mnt->mnt_flags even though the mount was present in the mount
rbtree of the mount namespace.
The root cause is the following race. When a btrfs subvolume is mounted
a temporary mount is created:
btrfs_get_tree_subvol()
{
mnt = fc_mount()
// Register the newly allocated mount with sb->mounts:
lock_mount_hash();
list_add_tail(&mnt->mnt_instance, &mnt->mnt.mnt_sb->s_mounts);
unlock_mount_hash();
}
and registered on sb->s_mounts. Later it is added to an anonymous mount
namespace via mount_subvol():
-> mount_subvol()
-> mount_subtree()
-> alloc_mnt_ns()
mnt_add_to_ns()
vfs_path_lookup()
put_mnt_ns()
The mnt_add_to_ns() call raises MNT_ONRB in @mnt->mnt_flags. If someone
concurrently does a ro remount:
reconfigure_super()
-> sb_prepare_remount_readonly()
{
list_for_each_entry(mnt, &sb->s_mounts, mnt_instance) {
}
all mounts registered in sb->s_mounts are visited and first
MNT_WRITE_HOLD is raised, then MNT_READONLY is raised, and finally
MNT_WRITE_HOLD is removed again.
The flag modification for MNT_WRITE_HOLD/MNT_READONLY and MNT_ONRB race
so MNT_ONRB might be lost.
Fixes: 2eea9ce431 ("mounts: keep list of mounts in an rbtree")
Cc: <stable@kernel.org> # v6.8+
Link: https://lore.kernel.org/r/20241215-vfs-6-14-mount-work-v1-1-fd55922c4af8@kernel.org
Link: https://lore.kernel.org/r/ec6784ed-8722-4695-980a-4400d4e7bd1a@gmx.com [1]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new "mountinfo" sample userland program that demonstrates how to
use statmount() and listmount() to get at the same info that
/proc/pid/mountinfo provides.
The output of the program tries to mimic the mountinfo procfile
contents. With the -p flag, it can be pointed at an arbitrary pid to
print out info about its mount namespace. With the -r flag it will
attempt to walk all of the namespaces under the pid's mount namespace
and dump out mount info from all of them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241115-statmount-v2-1-cd29aeff9cbb@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Use the generic scripts to generate headers from the syscall table for
mips.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-13-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
loongarch uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-12-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arm64 uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-11-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A set of loosely connected changes, fixing few outstanding issues as
well as improving readability of the existing code.
The fixes lead the series, first five patches. The goal is to make sure
proper read() is used when accessing the registers, probe() and remove()
sequences for HDAudio streaming are synced, minimal AudioDSP firmware
version points to correct values and recent additions to the topology
are parsed properly.
The only patch that points to 'new functionality' is:
ASoC: Intel: avs: Update ASRC definition
as with the struct definition updates, one can utilize the ASRC module
in both streaming directions now (previously limited to Capture).
Everything else either improves the logging or provides comments vital
for long-term maintenance of the code.
parisc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-10-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
alpha uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-9-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the generic scripts to generate headers from the syscall table for
both 32- and 64-bit x86.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-8-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
xtensa uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-7-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sparc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-6-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sh uses a syscall table, use that in perf instead of requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-5-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arm uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-4-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
csky uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-3-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arc uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-2-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently each architecture in perf independently generates syscall
headers.
Adapt the work that has gone into unifying syscall header
implementations in the kernel to work with perf tools.
Introduce this framework with riscv at first. riscv previously relied on
libaudit, but with this change, perf tools for riscv no longer needs
this external dependency.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-1-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On the Dell Precision M6800/OXD1M5, BIOS A26 06/13/2029, Linux prints the
warning below.
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
Following the same suggestions by Wolfram Sang as for the Dell Precision
3540 [1], the accelerometer can be successfully found on I2C bus 0 at
address 0x29.
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-0/new_device
lis3lv02d 0x29
$ dmesg | tail -5
[1185.385204] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator
[1185.385235] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator
[1185.399689] lis3lv02d: 8 bits 3DC sensor found
[1185.449391] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input371
[1185.449577] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29
So, the device has that accelerometer. Add the I2C address to the
mapping list, and test it successfully on the device.
[1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Patrick Höhn <hoehnp@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240312193132.26518-1-hoehnp@gmx.de
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Since the changes in
commit f748a07a0b ("PCI: Remove legacy pcim_release()")
all pcim_enable_device() does is set up a callback that disables the
device from being disabled from driver detach. The function
pcim_pin_device() prevents said disabling. pcim_enable_device(),
therefore, sets up an action that is removed immediately afterwards by
pcim_pin_device().
Replace pcim_enable_device() with pci_enable_device() and remove the
unnecessary call to pcim_pin_device().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241121195624.144839-2-pstanner@redhat.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
So far all tests use seqno one and only vary the context. Lets add some
tests which vary the seqno too.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115102153.1980-6-tursulin@igalia.com
Add a test which double checks that fences are in the expected order
after a merge.
While at it also switch to using a mock array for the complex test
instead of a merge.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115102153.1980-5-tursulin@igalia.com
Testing some workloads in two different scenarios, such as games running
under Gamescope on a Steam Deck, or vkcube under a Plasma desktop, shows
that in a significant portion of calls the dma_fence_unwrap_merge helper
is called with just a single unsignalled fence.
Therefore it is worthile to add a fast path for that case and so bypass
the memory allocation and insertion sort attempts.
Tested scenarios:
1) Hogwarts Legacy under Gamescope
~1500 calls per second to __dma_fence_unwrap_merge.
Percentages per number of fences buckets, before and after checking for
signalled status, sorting and flattening:
N Before After
0 0.85%
1 69.80% -> The new fast path.
2-9 29.36% 9% (Ie. 91% of this bucket flattened to 1 fence)
10-19
20-40
50+
2) Cyberpunk 2077 under Gamescope
~2400 calls per second.
N Before After
0 0.71%
1 52.53% -> The new fast path.
2-9 44.38% 50.60% (Ie. half resolved to a single fence)
10-19 2.34%
20-40 0.06%
50+
3) vkcube under Plasma
90 calls per second.
N Before After
0
1
2-9 100% 0% (Ie. all resolved to a single fence)
10-19
20-40
50+
In the case of vkcube all invocations in the 2-9 bucket were actually
just two input fences.
v2:
* Correct local variable name and hold on to unsignaled reference. (Chistian)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Friedrich Vock <friedrich.vock@gmx.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115102153.1980-4-tursulin@igalia.com
The RK3588 EVB1 has an onboard AP6275P WLAN/BT module. This adds
support for the WLAN side, which is connected to the second
PCIe bus. The Bluetooth side is connected to UART and handled
separately.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241210162452.116767-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Ethernet phys normally need a 25MHz refclk input. On a lot of boards
this is done with a dedicated 25MHz crystal. But the rk3588 CRU also
provides a means for that via the refclko25m_ethX clock outputs that
can be used for that function.
The mdio bus normally probes devices on the bus at runtime, by reading
specific phy registers. This requires the phy to be running and thus
also being supplied by its reference clock.
While there exist the possibility and dt-binding to declare these
input clocks for each phy in the phy-dt-node, this is only relevant
_after_ the phy has been detected and during the drivers probe-run.
This results in a chicken-and-egg-problem. The refclks in the CRU are
running on boot of course, but phy-probing can very well happen after
clk_disable_unused has run.
In the past I tried to make clock-handling part of the mdio bus code [0]
but that wasn't very well received, due to it being specific to OF and
clocks with the consensus being that resources needed for detection
need to be enabled before.
So to make probing ethernet phys using the internal refclks possible,
make those 2 clocks critical.
[0] https://lore.kernel.org/netdev/13590315.F0gNSz5aLb@diego/T/
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Link: https://lore.kernel.org/r/20241214224820.200665-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Christoph Hellwig <hch@lst.de> says:
File systems that write out of place usually require different alignment
for direct I/O writes than what they can do for reads. This series tries
to address this by adding yet another statx field.
* patches from https://lore.kernel.org/r/20250109083109.1441561-1-hch@lst.de:
xfs: report larger dio alignment for COW inodes
xfs: report the correct read/write dio alignment for reflinked inodes
xfs: cleanup xfs_vn_getattr
fs: add STATX_DIO_READ_ALIGN
fs: reformat the statx definition
Link: https://lore.kernel.org/r/20250109083109.1441561-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
For I/O to reflinked blocks we always need to write an entire new file
system block, and the code enforces the file system block alignment for
the entire file if it has any reflinked blocks. Mirror the larger
value reported in the statx in the dio_offset_align in the xfs-specific
XFS_IOC_DIOINFO ioctl for the same reason.
Don't bother adding a new field for the read alignment to this legacy
ioctl as all new users should use statx instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-6-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
For I/O to reflinked blocks we always need to write an entire new
file system block, and the code enforces the file system block alignment
for the entire file if it has any reflinked blocks.
Use the new STATX_DIO_READ_ALIGN flag to report the asymmetric read
vs write alignments for reflinked files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-5-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Split the two bits of optional statx reporting into their own helpers
so that they are self-contained instead of deeply indented in the main
getattr handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-4-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a separate dio read align field, as many out of place write
file systems can easily do reads aligned to the device sector size,
but require bigger alignment for writes.
This is usually papered over by falling back to buffered I/O for smaller
writes and doing read-modify-write cycles, but performance for this
sucks, so applications benefit from knowing the actual write alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-3-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The comments after the declaration are becoming rather unreadable with
long enough comments. Move them into lines of their own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-2-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
