Remove "enable-dma" and "bus-id" properties which are both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The following UBSAN error is reported during boot on the db410c board on
a clang-19 build:
Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP
...
pc : qnoc_probe+0x5f8/0x5fc
...
The cause of the error is that the counter member was not set before
accessing the annotated flexible array member, but after that. Fix this
by initializing it earlier.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYs+2mBz1y2dAzxkj9-oiBJ2Acm1Sf1h2YQ3VmBqj_VX2g@mail.gmail.com
Fixes: dd4904f3b9 ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241203223334.233404-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Retrieve electrical power readings for resources in a computing
environment via diag 0x324. diag 0x324 stores the power readings in the
power information block (pib).
Provide power readings from pib via diag324 ioctl interface. diag324
ioctl provides new pib to the user only if the threshold time has passed
since the last call. Otherwise, cache data is returned. When there are
no active readers, cleanup of pib buffer is performed.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Create a misc device /dev/diag to fetch diagnose specific information
from the kernel and provide it to userspace.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
exrl is present in all machines currently supported in the linux
kernel, therefore prefer it over ex. This saves one instruction
and doesn't need an additional register to hold the address of the
target instruction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
By default page protection definitions like PAGE_RX have the _PAGE_NOEXEC
bit set. For older machines without the instruction execution protection
facility this bit is not allowed to be used in page table entries, and
therefore must be removed.
This is done at a couple of page table walkers, but also at some but not
all page table modification functions like ptep_modify_prot_commit(). Avoid
all of this and change the page, segment and region3 protection definitions
so that the noexec bit is masked out automatically if the instruction
execution-protection facility is not available. This is similar to what
also various other architectures do which had to solve the same problem.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove an outdated comment that is also located at a random place. The
generic statement that read permissions imply execute permissions is
wrong since the instruction execution-protection facility is available.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
On failure, "dentry" is the error code. If the error code indicates
that there is no space, a new cluster may need to be allocated; for
other errors, it should be returned directly.
Only on success, "dentry" is the index of the directory entry, and
it needs to be converted into the directory entry index within the
cluster where it is located.
Fixes: 8a3f5711ad ("exfat: reduce FAT chain traversal")
Reported-by: syzbot+6f6c9397e0078ef60bce@syzkaller.appspotmail.com
Tested-by: syzbot+6f6c9397e0078ef60bce@syzkaller.appspotmail.com
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Introduce support for passing custom BIOS inputs to the PMF-TA to assess
BIOS input policy conditions. The PMF driver will adjust system settings
based on these BIOS input conditions and their corresponding output
actions.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241205101937.2547351-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-mellanox-v1-1-b6fe4f68e2ca@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The backlight subsystem has gotten its own power constants. Replace
FB_BLANK_UNBLANK with BACKLIGHT_POWER_ON.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20241213100647.200598-1-tzimmermann@suse.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Until now the wmi-bmof driver had to allocate the binary sysfs
attribute dynamically since its size depends on the bmof buffer
returned by the firmware.
Use the new .bin_size() callback to avoid having to do this memory
allocation.
Tested on a Asus Prime B650-Plus.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241206215650.2977-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The driver now fails to link when the power supply core is missing
or in a loadable module:
_64-linux/bin/x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_irq_handler':
bytcrc_pwrsrc.c:(.text+0x2aa): undefined reference to `power_supply_changed'
x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_psy_get_property':
bytcrc_pwrsrc.c:(.text+0x2f6): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: drivers/platform/x86/intel/bytcrc_pwrsrc.o: in function `crc_pwrsrc_probe':
bytcrc_pwrsrc.c:(.text+0x644): undefined reference to `devm_power_supply_register'
Add the appropriate dependency for it.
Fixes: 0130ec83c5 ("platform/x86/intel: bytcrc_pwrsrc: Optionally register a power_supply dev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241216083409.1885677-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the accelerometer address for the following laptop models
to lis3lv02d_devices[]:
Dell Latitude E6330
Dell Latitude E6430
Dell XPS 15 9550
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209183557.7560-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Various Dell laptops have an lis3lv02d freefall/accelerometer sensor.
The lis3lv02d chip has an interrupt line as well as an I2C connection to
the system's main SMBus.
The lis3lv02d is described in the ACPI tables by an SMO88xx ACPI device,
but the SMO88xx ACPI fwnodes are incomplete and only list an IRQ resource.
So far this has been worked around with some SMO88xx specific quirk code
in the generic i2c-i801 driver, but it is not necessary to handle the Dell
specific instantiation of i2c_client-s for SMO88xx ACPI devices there.
The kernel already instantiates platform_device-s for these with an
acpi:SMO88xx modalias. The drivers/platform/x86/dell/dell-smo8800.c
driver binds to this platform device but this only deals with
the interrupt resource. Add a drivers/platform/x86/dell/dell-lis3lv02d.c
which will matches on the same acpi:SMO88xx modaliases and move
the i2c_client instantiation from the generic i2c-i801 driver there.
Moving the i2c_client instantiation has the following advantages:
1. This moves the SMO88xx ACPI device quirk handling away from the generic
i2c-i801 module which is loaded on all Intel x86 machines to a module
which will only be loaded when there is an ACPI SMO88xx device.
2. This removes the duplication of the SMO88xx ACPI Hardware ID (HID) table
between the i2c-i801 and dell-smo8800 drivers.
3. This allows extending the quirk handling by adding new code and related
module parameters to the dell-lis3lv02d driver, without needing to modify
the i2c-i801 code.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20241209183557.7560-3-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the SMO88xx acpi_device_ids to a new dell-smo8800-ids.h header,
so that these can be shared with the new dell-lis3lv02d code.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209183557.7560-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
W=1 build triggers this warning:
drivers/platform/x86/intel/plr_tpmi.c:315:55: error: ‘snprintf’ output
may be truncated before the last format character
[-Werror=format-truncation=]
315 | snprintf(name, sizeof(name), "domain%d", i);
| ^
drivers/platform/x86/intel/plr_tpmi.c:315:17: note: ‘snprintf’ output
between 8 and 17 bytes into a destination of size 16
315 | snprintf(name, sizeof(name), "domain%d", i);
Inspecting the code tells that maximum i in intel_plr_probe() will fit
into u8 because it comes from:
struct intel_tpmi_pfs_entry {
...
u64 num_entries:8;
...but compiler does not know that. Saving one byte in name[] at the
expense of a warning with W=1 seems a bad trade so simply make it
name[17].
Link: https://lore.kernel.org/r/20241210140115.1375-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-5-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-4-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-3-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-2-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
While at it switch from the custom DCDBAS_BIN_ATTR_RW() to the identical
BIN_ATTR_RW() macro.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241202-sysfs-const-bin_attr-pdx86-v1-1-9ab204c2a814@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
unix_our_peer() is used only in unix_may_send().
Let's inline it in unix_may_send().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The error path is complicated in unix_dgram_sendmsg() because there
are two timings when other could be non-NULL: when it's fetched from
unix_peer_get() and when it's looked up by unix_find_other().
Let's move unix_peer_get() to the else branch for unix_find_other()
and clean up the error paths.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When other has SOCK_DEAD in unix_dgram_sendmsg(), we hold
unix_state_lock() for the sender socket first.
However, we do not need it for sk->sk_type.
Let's move the lock down a bit.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When other has SOCK_DEAD in unix_dgram_sendmsg(), we call sock_put() for
it first and then set NULL to other before jumping to the error path.
This is to skip sock_put() in the error path.
Let's not set NULL to other and defer the sock_put() to the error path
to clean up the labels later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are two paths jumping to the restart label in unix_dgram_sendmsg().
One requires another lookup and sk_filter(), but the other doesn't.
Let's split the label to make each flow more straightforward.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In unix_dgram_sendmsg(), we use a local variable sunaddr pointing
NULL or msg->msg_name based on msg->msg_namelen.
Let's remove sunaddr and simplify the usage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When other is NULL in unix_dgram_sendmsg(), we check if sunaddr
is NULL before looking up a receiver socket.
There are three paths going through the check, but it's always
false for 2 out of the 3 paths: the first socket lookup and the
second 'goto restart'.
The condition can be true for the first 'goto restart' only when
SOCK_DEAD is flagged for the socket found with msg->msg_name.
Let's move the check to the single appropriate path.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_dgram_sendmsg().
Then, we need not (re)set 0 to err.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we move send_sig() to the SEND_SHUTDOWN check before
the while loop, then we can reuse the same kfree_skb()
after the pipe_err_free label.
Let's gather the scattered kfree_skb()s in error paths.
While at it, some style issues are fixed, and the pipe_err_free
label is renamed to out_pipe to match other label names.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_stream_sendmsg().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The label order is weird in unix_stream_connect(), and all NULL checks
are unnecessary if reordered.
Let's clean up the error paths to make it easy to set a drop reason
for each path.
While at it, a comment with the old style is updated.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_stream_connect().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The source and destination rings were incorrectly assigned during the ring
linking process. The "source" ring, which contains the new segments,
was not spliced into the "destination" ring, leading to incorrect ring
expansion.
Fixes: fe688e5006 ("usb: xhci: refactor xhci_link_rings() to use source and destination rings")
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Closes: https://lore.kernel.org/lkml/CAAJw_ZtppNqC9XA=-WVQDr+vaAS=di7jo15CzSqONeX48H75MA@mail.gmail.com/
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241217102122.2316814-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHC hosts from several vendors have the same issue where endpoints start
so slowly that a later queued 'Stop Endpoint' command may complete before
endpoint is up and running.
The 'Stop Endpoint' command fails with context state error as the endpoint
still appears as stopped.
See commit 42b7581376 ("usb: xhci: Limit Stop Endpoint retries") for
details
CC: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241217102122.2316814-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GPIO configuration differs for the spi0 clk, cs, miso, mosi pins.
Therefore, split the spi0 pin group and assign function to each pin
as per the specification.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/20241217091308.3253897-3-quic_mmanikan@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There has been a recent change in OP-TEE to print 8 and 16 character
commit id for 32bit and 64bit architecture respectively.
In case if commit id is starting with 0 like 04d1c612ec7beaede073b8c
it is printing revision as below removing leading 0
"optee: revision 4.4 (4d1c612ec7beaed)"
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20241129114648.3048941-1-sahil.malhotra@nxp.com
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
On gt reset, if a context is running, then accumulate it's active time
into the busyness counter since there will be no chance for the context
to switch out and update it's run time.
v2: Move comment right above the if (John)
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7ed047da59)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Active busyness of an engine is calculated using gt timestamp and the
context switch in time. While capturing the gt timestamp, it's possible
that the context switches out. This race could result in an active
busyness value that is greater than the actual context runtime value by a
small amount. This leads to a negative delta and throws off busyness
calculations for the user.
If a subsequent count is smaller than the previous one, just return the
previous one, since we expect the busyness to catch up.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com
(cherry picked from commit cf907f6d29)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
On GT reset, we store total busyness counts for all engines and
re-register the utilization buffer with GuC. At that time we should
reset the buffer, so that we don't get spurious busyness counts on
subsequent queries.
To repro this issue, run igt@perf_pmu@busy-hang followed by
igt@perf_pmu@most-busy-idle-check-all for a couple iterations.
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit abd318237f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Fedora 41 has reached Linux 6.12 kernel with TOMOYO enabled. I observed
that /usr/lib/systemd/systemd executes /usr/lib/systemd/systemd-executor
by passing dirfd == 9 or dirfd == 16 upon execveat().
Commit ada1986d07 ("tomoyo: fallback to realpath if symlink's pathname
does not exist") used realpath only if symlink's pathname does not exist.
But an out of tree patch suggested that it will be reasonable to always
use realpath if symlink's pathname refers to proc filesystem.
Therefore, this patch changes the pathname used for checking "file execute"
and the domainname used after a successful execve() request.
Before:
<kernel> /usr/lib/systemd/systemd
file execute proc:/self/fd/16 exec.realpath="/usr/lib/systemd/systemd-executor" exec.argv[0]="/usr/lib/systemd/systemd-executor"
file execute proc:/self/fd/9 exec.realpath="/usr/lib/systemd/systemd-executor" exec.argv[0]="/usr/lib/systemd/systemd-executor"
<kernel> /usr/lib/systemd/systemd proc:/self/fd/16
file execute /usr/sbin/auditd exec.realpath="/usr/sbin/auditd" exec.argv[0]="/usr/sbin/auditd"
<kernel> /usr/lib/systemd/systemd proc:/self/fd/16 /usr/sbin/auditd
<kernel> /usr/lib/systemd/systemd proc:/self/fd/9
file execute /usr/bin/systemctl exec.realpath="/usr/bin/systemctl" exec.argv[0]="/usr/bin/systemctl"
<kernel> /usr/lib/systemd/systemd proc:/self/fd/9 /usr/bin/systemctl
After:
<kernel> /usr/lib/systemd/systemd
file execute /usr/lib/systemd/systemd-executor exec.realpath="/usr/lib/systemd/systemd-executor" exec.argv[0]="/usr/lib/systemd/systemd-executor"
<kernel> /usr/lib/systemd/systemd /usr/lib/systemd/systemd-executor
file execute /usr/bin/systemctl exec.realpath="/usr/bin/systemctl" exec.argv[0]="/usr/bin/systemctl"
file execute /usr/sbin/auditd exec.realpath="/usr/sbin/auditd" exec.argv[0]="/usr/sbin/auditd"
<kernel> /usr/lib/systemd/systemd /usr/lib/systemd/systemd-executor /usr/bin/systemctl
<kernel> /usr/lib/systemd/systemd /usr/lib/systemd/systemd-executor /usr/sbin/auditd
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Groups can be killed during a reset even though they did nothing wrong.
That usually happens when the FW is put in a bad state by other groups,
resulting in group suspension failures when the reset happens.
If we end up in that situation, flag the group innocent and report
innocence through a new DRM_PANTHOR_GROUP_STATE flag.
Bump the minor driver version to reflect the uAPI change.
Changes in v4:
- Add an entry to the driver version changelog
- Add R-bs
Changes in v3:
- Actually report innocence to userspace
Changes in v2:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211080500.2349505-1-boris.brezillon@collabora.com
In commit 03c7527e97 ("KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits
to be overridden") we made that bitfield in the ID registers unwritable
however the change neglected to make the corresponding update to set_id_regs
resulting in it failing:
ok 56 ID_AA64MMFR0_EL1_BIGEND
==== Test Assertion Failure ====
aarch64/set_id_regs.c:434: masks[idx] & ftr_bits[j].mask == ftr_bits[j].mask
pid=5566 tid=5566 errno=22 - Invalid argument
1 0x00000000004034a7: test_vm_ftr_id_regs at set_id_regs.c:434
2 0x0000000000401b53: main at set_id_regs.c:684
3 0x0000ffff8e6b7543: ?? ??:0
4 0x0000ffff8e6b7617: ?? ??:0
5 0x0000000000401e6f: _start at ??:?
not ok 8 selftests: kvm: set_id_regs # exit=254
Remove ID_AA64MMFR1_EL1.ASIDBITS from the set of bitfields we test for
writeability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241216-kvm-arm64-fix-set-id-asidbits-v1-1-8b105b888fc3@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
