When debugging/detecting outlier commit stalls, having an indicator that
we are currently in a long commit critical section can be very useful.
Extend the commit_stats sysfs file to also include the current commit
critical section duration.
Since this requires storing the last commit start time, use that rather
than a separate stack variable for storing the finished commit durations
as well.
This also requires slightly moving up the timing of the stats updating
to *inside* the critical section to avoid the transaction T+1 setting
the critical_section_start_time to 0 before transaction T can update its
stats, which would trigger the new ASSERT. This is an improvement in and
of itself, as it makes the stats more accurately represent the true
critical section time. It may be yet better to pull the stats up to where
start_transaction gets unblocked, rather than the next commit, but this
seems like a good enough place as well.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace struct embedding with union to enable safe type conversion in
btrfs_backref_node, tree_block and mapping_node.
Adjust function calls to use the new unified API, eliminating redundant
parameters.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the rb-tree helper so we don't open code the search and insert
code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
mkfs.btrfs up to v4.14 actually can leave a chunk inside the reserved
space when invoked with `-m single`, fixed by 997f9977c24397eb6980bb9
("mkfs: Prevent temporary system chunk to use space in reserved 1M
range") released with v4.15.
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_backref_link_edge() is always called with the LINK_LOWER argument.
We can simplify it and remove the LINK_LOWER and LINK_UPPER macros
completely.
The last call with LINK_UPPER was removed with commit 0097422c0d
("btrfs: remove clone_backref_node() from relocation").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a common error path where we abort the transaction, but like this
in case we get a transaction abort stack trace we don't know exactly which
previous function call failed. Instead abort the transaction after any
function call that returns an error, so that we can easily identify which
function failed.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a common error path where we abort the transaction, but like this
in case we get a transaction abort stack trace we don't know exactly which
previous function call failed. Instead abort the transaction after any
function call that returns an error, so that we can easily identify which
function failed.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of having a common btrfs_abort_transaction() call for when any of
the two btrfs_inc_ref() calls fail, move the btrfs_abort_transaction() to
happen immediately after each one of the calls, so that when analyzing a
stack trace with a transaction abort we know which call failed.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Transaction aborts should be done next to the place the error happens,
which was not done in add_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Transaction aborts should be done next to the place the error happens,
which was not done in remove_block_group_free_space().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this fuzzy logic at btrfs_recover_log_trees() where we don't
abort the transaction and exit immediately after each function call that
returned an error, and instead have if-then-else logic or check if the
previous function call returned success before calling the next function.
Make the flow more straightforward by immediately aborting the transaction
and exiting after each function call failure. This also allows to avoid
two consecutive if statements that test the same conditions:
if (!ret && wc.stage == LOG_WALK_REPLAY_ALL) {
(...)
}
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to call btrfs_release_path() before calling
btrfs_init_root_free_objectid() as we have released the path already at
the top of the loop and the previous call to fixup_inode_link_counts()
also releases the path. So remove it to simplify the code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we failed walking a log tree during replay, we have a missing
transaction abort to prevent committing a transaction where we didn't
fully replay all the changes from a log tree and therefore can leave the
respective subvolume tree in some inconsistent state. So add the missing
transaction abort.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a single line doing a transaction abort in case either we got an
error from btrfs_get_fs_root() different from -ENOENT or we got an error
from btrfs_pin_extent_for_log_replay(), making it hard to figure out which
function call failed when looking at a transaction abort massages and
stack trace in dmesg. Change this to have an explicit transaction abort
for each one of the two cases.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_should_periodic_reclaim() is not used outside of space-info.c so
make it static and remove the prototype from space-info.h.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When deciding if a zoned filesystem is reaching the threshold to reclaim
data block groups, look at the size of the filesystem not to potentially
total available size of all drives in the filesystem.
Especially if a filesystem was created with mkfs' -b option, constraining
it to only a portion of the block device, the numbers won't match and
potentially garbage collection is kicking in too late.
Fixes: 3687fcb075 ("btrfs: zoned: make auto-reclaim less aggressive")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(),
the tid value is already incremented, even though the corresponding
TID is not actually allocated. Proceed to
ath12k_dp_rx_peer_tid_delete() starting from unallocated tid,
which might leads to freeing unallocated TID and cause potential
crash or out-of-bounds access.
Hence, fix by correctly decrementing tid before cleanup to match only
the successfully allocated TIDs.
Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(),
as decrementing the tid before cleanup in loop will take care of this.
Compile tested only.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250721061749.886732-1-quic_sarishar@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Due to the restrict in MAC80211 that DFS (Dynamic Frequency Selection)
can't be enabled on multiple channels, commit 176f3009ae ("wifi: ath12k:
support 2 channels for single pdev device") removes DFS support in order
to support 2 channels concurrently, making AP mode not working on DFS
channels [1].
Revert portions of that commit to bring DFS back, and add a new
combination to support 2-channels concurrency. This is valid because the
MAC80211 restrict works on each individual combination, but does not care
about them as a whole, as far as DFS is concerned.
This change applies to WCN7850 only, other chips are not affected.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 176f3009ae ("wifi: ath12k: support 2 channels for single pdev device")
Reported-by: Mihai Moldovan <ionic@ionic.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220346 # 1
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Link: https://patch.msgid.link/20250721-ath12k-dfs-v1-1-065c31454f91@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath12k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath12k-zero-brace-v1-1-d8c8ca9d40a8@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath11k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath11k-zero-brace-v1-1-6132e2ef1748@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Prefer {} to {0} in initializers since {} works even when the first
member is not a scalar.
Generated using:
sed -i 's/{[[:space:]]*0[[:space:]]*}/{}/g' drivers/net/wireless/ath/ath10k/*
Compile tested only.
Link: https://patch.msgid.link/20250720-ath10k-zero-brace-v1-1-c1ee818d6238@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The power_domain_target event event is only called when CONFIG_OMAP2PLUS
is defined. As each event can take up to 5K regardless if they are used or
not, it's best not to define them when they are not used. Add #ifdef
around these events when they are not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145408.415483176@goodmis.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The events device_pm_callback_start and device_pm_callback_end events are
only called when CONFIG_PM_SLEEP is defined. As each event can take up to
5K regardless if they are used or not, it's best not to define them when
they are not used. Add #ifdef around these events when they are not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145408.246703478@goodmis.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The events psci_domain_idle_enter and psci_domain_idle_exit events are
only called when CONFIG_ARM_PSCI_CPUIDLE is defined. As each event can
take up to 5K (less for DEFINE_EVENT()) regardless if they are used or
not, it's best not to define them when they are not used. Add #ifdef
around these events when they are not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145408.074769245@goodmis.org
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As the trace event powernv_throttle is only used by the powernv code, move
it to a separate include file and have that code directly enable it.
Trace events can take up around 5K of memory when they are defined
regardless if they are used or not. It wastes memory to have them defined
in configurations where the tracepoint is not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145407.906308844@goodmis.org
Fixes: 0306e481d4 ("cpufreq: powernv/tracing: Add powernv_throttle tracepoint")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace event alarmtimer_suspend is only called when RTC_CLASS is
defined. As every event created can create up to 5K of text and meta data
regardless if it is called or not it should not be created and waste
memory. Hide the event when CONFIG_RTC_CLASS is not defined.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250612095828.6d75dfa3@batman.local.home
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The event aer_event is only used when CONFIG_PCIEAER is configured. It
should not be created when it is not. When an event is created it creates
around 5K of text and meta data regardless if the tracepoint is used or
not. Instead of wasting this memory, put #ifdef around the event to not
create it when it is not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250612094932.4a08abd6@batman.local.home
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As ktest.pl can run in various different directories, to make sure the
test is running in the proper directory with the proper source and proper
destination directory, display the content of BUILD_DIR and OUTPUT_DIR at
the start of every test.
This can be helpful for the test runner to stop the test if a test is
running in the wrong location instead of finding out after the test has
completed.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.898022631@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a default variable contains itself, do not recurse on it.
For example:
ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
# ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allow -DBUILD_TYPE=boot work the same as -D BUILD_TYPE=boot just like
normal single character option does in most applications.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.567246162@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently -D only updates the persistent options that are defined with
"=". Allow it to also override all temp variables that are defined with
":=".
ktest.pl -D 'USE_TEMP_DIR:=1' -D 'TEST_TYPE[2]=build' config
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.399653933@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add -D option that lets the user override options in the config.
For instance, if the config has: BUILD_NOCLEAN=1 which prevents mrproper
from being called before builds, and the user wants to call it once. The
user can run:
ktest -D BUILD_NOCLEAN=0 config
And the default "BUILD_NOCLEAN" options will be disabled.
If the user wants to change the second test to do a build and not boot,
the user can run:
ktest -D 'TEST_TYPE[2]=build' config
Where the '[#]' is for the test to assign the variable for. In the above
example, it will happen on test 2.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.231478909@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ‘mediatek,mt7981-thermal’ and ‘mediatek,mt8516-thermal’ strings
aren't definied in the driver. Both should have fallback compatible
strings. This commit fixes this issue.
Fixes: 788494ba09 ("dt-bindings: thermal: convert Mediatek Thermal to the json-schema")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20250712195904.6988-2-olek2@wp.pl
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The upper layer may require the link ID to properly handle
unexpected frames. For instance, if hostapd, operating as an
AP MLD, receives a data frame from a non-associated STA,
it must send deauthentication to the link on which the STA is
operating.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Link: https://patch.msgid.link/20250721065159.1740992-1-michael-cy.lee@mediatek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For broadcast frames, every interface might have to process it and
therefore the link_id cannot be determined in the driver.
In mac80211, when the frame is about to be forwarded to each interface,
we can use the member "freq" in struct ieee80211_rx_status to determine
the "link_id" for each interface.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Link: https://patch.msgid.link/20250721062929.1662700-1-michael-cy.lee@mediatek.com
[simplify, remove unnecessary link->conf check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
