Commit graph

1,385,397 commits

Author SHA1 Message Date
Thomas Zimmermann
14062c267f Merge drm/drm-fixes into drm-misc-fixes
Backmerging to get fixes from v6.12-rc7.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-11-11 09:23:27 +01:00
Andrew Morton
2ec0859039 Merge branch 'mm-hotfixes-stable' into mm-stable
Pick up e7ac4daeed ("mm: count zeromap read and set for swapout and
swapin") in order to move

mm: define obj_cgroup_get() if CONFIG_MEMCG is not defined
mm: zswap: modify zswap_compress() to accept a page instead of a folio
mm: zswap: rename zswap_pool_get() to zswap_pool_tryget()
mm: zswap: modify zswap_stored_pages to be atomic_long_t
mm: zswap: support large folios in zswap_store()
mm: swap: count successful large folio zswap stores in hugepage zswpout stats
mm: zswap: zswap_store_page() will initialize entry after adding to xarray.
mm: add per-order mTHP swpin counters

from mm-unstable into mm-stable.
2024-11-11 00:04:10 -08:00
Barry Song
e7ac4daeed mm: count zeromap read and set for swapout and swapin
When the proportion of folios from the zeromap is small, missing their
accounting may not significantly impact profiling.  However, it's easy to
construct a scenario where this becomes an issue—for example, allocating
1 GB of memory, writing zeros from userspace, followed by MADV_PAGEOUT,
and then swapping it back in.  In this case, the swap-out and swap-in
counts seem to vanish into a black hole, potentially causing semantic
ambiguity.

On the other hand, Usama reported that zero-filled pages can exceed 10% in
workloads utilizing zswap, while Hailong noted that some app in Android
have more than 6% zero-filled pages.  Before commit 0ca0c24e32 ("mm:
store zero pages to be swapped out in a bitmap"), both zswap and zRAM
implemented similar optimizations, leading to these optimized-out pages
being counted in either zswap or zRAM counters (with pswpin/pswpout also
increasing for zRAM).  With zeromap functioning prior to both zswap and
zRAM, userspace will no longer detect these swap-out and swap-in actions.

We have three ways to address this:

1. Introduce a dedicated counter specifically for the zeromap.

2. Use pswpin/pswpout accounting, treating the zero map as a standard
   backend.  This approach aligns with zRAM's current handling of
   same-page fills at the device level.  However, it would mean losing the
   optimized-out page counters previously available in zRAM and would not
   align with systems using zswap.  Additionally, as noted by Nhat Pham,
   pswpin/pswpout counters apply only to I/O done directly to the backend
   device.

3. Count zeromap pages under zswap, aligning with system behavior when
   zswap is enabled.  However, this would not be consistent with zRAM, nor
   would it align with systems lacking both zswap and zRAM.

Given the complications with options 2 and 3, this patch selects
option 1.

We can find these counters from /proc/vmstat (counters for the whole
system) and memcg's memory.stat (counters for the interested memcg).

For example:

$ grep -E 'swpin_zero|swpout_zero' /proc/vmstat
swpin_zero 1648
swpout_zero 33536

$ grep -E 'swpin_zero|swpout_zero' /sys/fs/cgroup/system.slice/memory.stat
swpin_zero 3905
swpout_zero 3985

This patch does not address any specific zeromap bug, but the missing
swpout and swpin counts for zero-filled pages can be highly confusing and
may mislead user-space agents that rely on changes in these counters as
indicators.  Therefore, we add a Fixes tag to encourage the inclusion of
this counter in any kernel versions with zeromap.

Many thanks to Kanchana for the contribution of changing
count_objcg_event() to count_objcg_events() to support large folios[1],
which has now been incorporated into this patch.

[1] https://lkml.kernel.org/r/20241001053222.6944-5-kanchana.p.sridhar@intel.com

Link: https://lkml.kernel.org/r/20241107011246.59137-1-21cnbao@gmail.com
Fixes: 0ca0c24e32 ("mm: store zero pages to be swapped out in a bitmap")
Co-developed-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Hailong Liu <hailong.liu@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-11 00:00:37 -08:00
Shuosheng Huang
078d2f2256 cpufreq: sun50i: add a100 cpufreq support
Let's add cpufreq nvmem based for allwinner a100 soc. It's similar to h6,
let us use efuse_xlate to extract the differentiated part.

Signed-off-by: Shuosheng Huang <huangshuosheng@allwinnertech.com>
[masterr3c0rd@epochal.quest: add A100 to opp_match_list]
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Parthiban Nallathambi <parthiban@linumiz.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-11-11 11:24:42 +05:30
Kent Overstreet
2642084f26 bcachefs: Allow for unknown key types in backpointers fsck
We can't assume that btrees only contain keys of a given type - even if
they only have a single key type listed in the allowed key types for
that btree; this is a forwards compatibility issue.

Reported-by: syzbot+a27c3aaa3640dd3e1dfb@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-11-11 00:37:19 -05:00
Kent Overstreet
0b6ec0c5ac bcachefs: Fix assertion pop in topology repair
Fixes: baefd3f849 ("bcachefs: btree_cache.freeable list fixes")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-11-11 00:37:18 -05:00
Jinjie Ruan
172bf5ed04 cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
mtk_cpufreq_get_cpu_power() return 0 if the policy is NULL. Then in
em_create_perf_table(), the later zero check for power is not invalid
as power is uninitialized. As Lukasz suggested, it must return -EINVAL when
the 'policy' is not found. So return -EINVAL to fix it.

Cc: stable@vger.kernel.org
Fixes: 4855e26bcf ("cpufreq: mediatek-hw: Add support for CPUFREQ HW")
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-11-11 09:45:17 +05:30
Jinjie Ruan
b51eb0874d cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
cppc_get_cpu_power() return 0 if the policy is NULL. Then in
em_create_perf_table(), the later zero check for power is not valid
as power is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of active_power() first, so if the callback
failed it should tell the core. So return -EINVAL to fix it.

Fixes: a78e720756 ("cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-11-11 09:45:16 +05:30
Jinjie Ruan
be392aa80f cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
cppc_get_cpu_cost() return 0 if the policy is NULL. Then in
em_compute_costs(), the later zero check for cost is not valid
as cost is uninitialized. As Quentin pointed out, kernel energy model
core check the return value of get_cost() first, so if the callback
failed it should tell the core. Return -EINVAL to fix it.

Fixes: 1a1374bb8c ("cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/c4765377-7830-44c2-84fa-706b6e304e10@stanley.mountain/
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-11-11 09:45:16 +05:30
Andy Shevchenko
db01e46689 cpufreq: loongson3: Check for error code from devm_mutex_init() call
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.

Fixes: ccf5145414 ("cpufreq: Add Loongson-3 CPUFreq driver support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-11-11 09:40:03 +05:30
Sibi Sankar
8c776a54d9 cpufreq: scmi: Fix cleanup path when boost enablement fails
Include free_cpufreq_table in the cleanup path when boost enablement fails.

cc: stable@vger.kernel.org
Fixes: a8e949d41c ("cpufreq: scmi: Enable boost support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2024-11-11 09:18:25 +05:30
Uwe Kleine-König
dbbd975cc6 fpga: Switch back to struct platform_driver::remove()
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/fpga to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

A few white space changes are included to make indention consistent.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20241108160002.252517-2-u.kleine-koenig@baylibre.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
2024-11-11 10:43:21 +08:00
Dave Airlie
56b70bf9ec Merge tag 'drm-misc-next-2024-11-08' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:

UAPI Changes:
- Add 1X7X5 media-bus formats.

Cross-subsystem Changes:
- Maintainer updates for VKMS and IT6263.
- Add media-bus-fmt for MEDIA_BUS_FMT_RGB101010_1X7X5_*.
- Add IT6263 DT bindings and driver.

Core Changes:
- Add ABGR210101010 support to panic handler.
- Use ATOMIC64_INIT in drm_file.c
- Improve scheduler teardown documentation.

Driver Changes:
- Make mediatek compile on ARM again.
- Add missing drm/drm_bridge.h header include, already in drm-next.
- Small fixes and cleanups to vkms, bridge/it6505, panfrost, panthor.
- Add panic support to nouveau for nv50+.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/344afe41-d27b-408a-8542-bfecfd3555f6@linux.intel.com
2024-11-11 12:10:49 +10:00
Esben Haabendal
5a36826a59 rtc: isl12022: Replace uint8_t types with u8
Keep coding style consistent, by using kernel integer types instead of
standard types.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240913-rtc-isl12022-alarm-irq-v2-3-37309d939723@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-11-11 00:06:46 +01:00
Esben Haabendal
c62d658e52 rtc: isl12022: Add alarm support
The ISL12022 RTC has a combined INT/fOUT pin, which can be used for alarm
interrupt when frequency output is not enabled.

The device-tree bindings should ensure that interrupt and clock output is
not enabled at the same time.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240913-rtc-isl12022-alarm-irq-v2-2-37309d939723@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-11-11 00:06:46 +01:00
Esben Haabendal
d4a6161f24 rtc: isl12022: Prepare for extending rtc device drvdata
Add a struct to hold the regmap pointer, so more information can be added.

This is morally a revert of commit f525b210e9 ("rtc: isl12022: Get rid of
unneeded private struct isl12022").

Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240913-rtc-isl12022-alarm-irq-v2-1-37309d939723@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-11-11 00:06:46 +01:00
Gary Guo
d072acda48 rust: use custom FFI integer types
Currently FFI integer types are defined in libcore. This commit creates
the `ffi` crate and asks bindgen to use that crate for FFI integer types
instead of `core::ffi`.

This commit is preparatory and no type changes are made in this commit
yet.

Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-4-gary@garyguo.net
[ Added `rustdoc`, `rusttest` and KUnit tests support. Rebased on top of
  `rust-next` (e.g. migrated more `core::ffi` cases). Reworded crate
  docs slightly and formatted. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-11-10 23:58:00 +01:00
Gary Guo
2fd6f55c04 rust: map __kernel_size_t and friends also to usize/isize
Currently bindgen has special logic to recognise `size_t` and `ssize_t`
and map them to Rust `usize` and `isize`. Similarly, `ptrdiff_t` is
mapped to `isize`.

However this falls short for `__kernel_size_t`, `__kernel_ssize_t` and
`__kernel_ptrdiff_t`. To ensure that they are mapped to usize/isize
rather than 32/64 integers depending on platform, blocklist them in
bindgen parameters and manually provide their definition.

Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20240913213041.395655-3-gary@garyguo.net
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-11-10 23:58:00 +01:00
Antonio Quartulli
63a24cf8cc m68k: coldfire/device.c: only build FEC when HW macros are defined
When CONFIG_FEC is set (due to COMPILE_TEST) along with
CONFIG_M54xx, coldfire/device.c has compile errors due to
missing MCFEC_* and MCF_IRQ_FEC_* symbols.

Make the whole FEC blocks dependent on having the HW macros
defined, rather than on CONFIG_FEC itself.

This fix is very similar to commit e6e1e7b19f ("m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined")

Fixes: b7ce7f0d0e ("m68knommu: merge common ColdFire FEC platform setup code")
To: Greg Ungerer <gerg@linux-m68k.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
2024-11-11 08:57:01 +10:00
Jean-Michel Hautbois
f212140962 m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
Fix a typo in the CONFIG_M5441x preprocessor condition, where the GPIO
register offset was incorrectly set to 8 instead of 0. This prevented
proper GPIO configuration for m5441x targets.

Fixes: bea8bcb12d ("m68knommu: Add support for the Coldfire m5441x.")
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
2024-11-11 08:57:01 +10:00
Gary Guo
75c1fd41a6 rust: fix size_t in bindgen prototypes of C builtins
Without `-fno-builtin`, for functions like memcpy/memmove (and many
others), bindgen seems to be using the clang-provided prototype. This
prototype is ABI-wise compatible, but the issue is that it does not have
the same information as the source code w.r.t. typedefs.

For example, bindgen generates the following:

    extern "C" {
        pub fn strlen(s: *const core::ffi::c_char) -> core::ffi::c_ulong;
    }

note that the return type is `c_ulong` (i.e. unsigned long), despite the
size_t-is-usize behavior (this is default, and we have not opted out
from it using --no-size_t-is-usize).

Similarly, memchr's size argument should be of type `__kernel_size_t`,
but bindgen generates `c_ulong` directly.

We want to ensure any `size_t` is translated to Rust `usize` so that we
can avoid having them be different type on 32-bit and 64-bit
architectures, and hence would require a lot of excessive type casts
when calling FFI functions.

I found that this bindgen behavior (which probably is caused by
libclang) can be disabled by `-fno-builtin`. Using the flag for compiled
code can result in less optimisation because compiler cannot assume
about their properties anymore, but this should not affect bindgen.

[ Trevor asked: "I wonder how reliable this behavior is. Maybe bindgen
  could do a better job controlling this, is there an open issue?".

  Gary replied: ..."apparently this is indeed the suggested approach in
  https://github.com/rust-lang/rust-bindgen/issues/1770". - Miguel ]

Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240913213041.395655-2-gary@garyguo.net
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-11-10 23:54:43 +01:00
Jerome Brunet
544177f20b hwmon: (pmbus) add documentation for existing flags
PMBUS_NO_WRITE_PROTECT and PMBUS_USE_COEFFICIENTS_CMD flags have been added
to pmbus, but the corresponding documentation was not updated.

Update the documentation before adding new flags

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Message-ID: <20241105-tps25990-v4-1-0e312ac70b62@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Wenliang Yan
52172ad87a hwmon: (ina226) Add support for SY24655
SY24655: Support for current and voltage detection as well as
power calculation.

Signed-off-by: Wenliang Yan <wenliang202407@163.com>
Message-ID: <20241106150547.2538-1-wenliang202407@163.com>
[groeck: Changed order of compatible entries;
 dropped spurious extra return statement in is_visible();
 fixed code problems]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Wenliang Yan
0196d07f0e dt-bindings: Add SY24655 to ina2xx devicetree bindings
SY24655 is similar to INA226. Its supply voltage and pin definitions
are therefore the same. Compared to INA226, SY24655 has two additional
registers for configuring and calculating average power.

Signed-off-by: Wenliang Yan <wenliang202407@163.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20241106150547.2538-2-wenliang202407@163.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Mariel Tinaco
9c1716bc51 hwmon: (pmbus/ltc2978) add support for ltc7841
Add support for LTC7841. The LTC7841 is a high performance
PolyPhase® single output synchronous boost converter controller.
Multiphase operation reduces input and output capacitor
requirements and allows the use of smaller inductors than the
single-phase equivalent.

The relevant registers in the LTC7841 are similar to the
LTC7880, only reduced by some amount. So it's just a matter of adding
the chip id. The device also doesn't support polling, on top of the
reduced register set, so a separate case for setting the chip info is
added.

Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com>
Message-ID: <20241029013734.293024-4-Mariel.Tinaco@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Mariel Tinaco
baf88c49a2 hwmon: (pmbus/ltc7841) add support for LTC7841 - docs
Add LTC7841 to compatible devices of LTC2978

Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com>
Message-ID: <20241029013734.293024-3-Mariel.Tinaco@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Mariel Tinaco
8b882f6ff0 dt-bindings: hwmon: ltc2978: add support for ltc7841
Add LTC7841 to supported devices of LTC2978. It has similar set of
registers to LTC7880, differing only in number of output channels and
some unimplemented PMBUS status and functionalities.

Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241029013734.293024-2-Mariel.Tinaco@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Ban Feng
46b94c485e hwmon: Add driver for I2C chip Nuvoton NCT7363Y
The NCT7363Y is a fan controller which provides up to 16
independent FAN input monitors. It can report each FAN input count
values. The NCT7363Y also provides up to 16 independent PWM
outputs. Each PWM can output specific PWM signal by manual mode to
control the FAN duty outside.

Signed-off-by: Ban Feng <kcfeng0@nuvoton.com>
Message-ID: <20241022052905.4062682-3-kcfeng0@nuvoton.com>
[groeck: Dropped unnecessary variable initialization, and , after { }]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Ban Feng
15cae9c0b9 dt-bindings: hwmon: Add NCT7363Y documentation
Add bindings for the Nuvoton NCT7363Y Fan Controller

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ban Feng <kcfeng0@nuvoton.com>
Message-ID: <20241022052905.4062682-2-kcfeng0@nuvoton.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Naresh Solanki
c20a783b67 dt-bindings: hwmon: pmbus: Add bindings for Vicor pli1209bc
Remove vicor,pli1209bc from trivial-devices as it requires additional
properties and does not fit into the trivial devices category.

Add new bindings for Vicor pli1209bc, a Digital Supervisor with
Isolation for use with BCM Bus Converter Modules.

VR rails are defined under regulator node as expected by pmbus driver.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20241021123044.3648960-1-naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Naresh Solanki
c9fb2552fd dt-bindings: hwmon: pmbus: Add bindings for MPS MP297x
Remove mps297x from trivial-devices as it requires
additional properties and does not fit into the trivial
devices category.

Add new bindings for MPS mp2971, mp2973 & mp2975.
It is Dual-Loop, Digital Multi-Phase Controller with PMBUS
interface

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Message-ID: <20241022103750.572677-1-naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Guenter Roeck
547a5c453c MAINTAINERS: Remove Aleksandr Mezin as NZXT-SMART2 driver maintainer
Per his request, remove Aleksandr Mezin as maintainer of the
NZXT-SMART2 hardware monitoring driver.

Cc: Aleksandr Mezin <mezin.alexander@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Sarah Maedel
ccae49e5cf hwmon: (nct6775) Add 665-ACE/600M-CL to ASUS WMI monitoring list
Boards such as
* Pro WS 665-ACE
* Pro WS 600M-CL
have got a nct6775 chip, but by default there's no use of it
because of resource conflict with WMI method.

Add affected boards to the WMI monitoring list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Co-developed-by: Tommy Giesler <tommy.giesler@hetzner.com>
Signed-off-by: Tommy Giesler <tommy.giesler@hetzner.com>
Signed-off-by: Sarah Maedel <sarah.maedel@hetzner-cloud.de>
Message-ID: <20241018074611.358619-1-sarah.maedel@hetzner-cloud.de>
[groeck: Change commit message to imperative mood]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Yikai Tsai
39671a14df hwmon: (isl28022) new driver for ISL28022 power monitor
Driver for Renesas ISL28022 power monitor with I2C interface.
The device monitors voltage, current via shunt resistor
and calculated power.

Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
Signed-off-by: Yikai Tsai <yikai.tsai.wiwynn@gmail.com>
Message-ID: <20241002081133.13123-3-yikai.tsai.wiwynn@gmail.com>
[groeck: Fixed alignment issues, dropped noise at end of probe]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Yikai Tsai
f3bfd13c4a dt-bindings: hwmon: add renesas,isl28022
Add dt-bindings for Renesas ISL28022 power monitor.

Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yikai Tsai <yikai.tsai.wiwynn@gmail.com>
Message-ID: <20241002081133.13123-2-yikai.tsai.wiwynn@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Uwe Kleine-König
6126f7bb60 hwmon: Switch back to struct platform_driver::remove()
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/hwmonto use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

While touching these files, make indention of the struct initializer
consistent in several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Message-ID: <20241017155900.137357-2-u.kleine-koenig@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Antoni Pokusinski
0eed6fc3d2 hwmon: (sht4x): add heater support
Add support for manipulating the internal heater of sht4x devices.
Enabling the heater removes condensed water from the sensor surface
which disturbs the relative humidity measurements.

The heater can operate at three heating levels (20, 110 or 200
milliwatts). Also, two heating durations may be selected (0.1 or 1s).
Once the heating time elapses the heater is automatically switched off.

Changes since v3:
* struct sht4x_data: add heating_complete timestamp
* struct sht4x_data: add data_pending flag
* heater_enable_store: return -EINVAL if input != 1
* heater_enable_store: check for data->heating_complete and update it
* heater_enable_store: set data_pending flag after heating request
* sht4x_read_values: msleep if heating in progress
* sht4x_read_values: dont send measurement request if data_pending
* heater_enable attr: make it RW
* Documentation: update info about heater_enable attr

Changes since v2:
* heater_enable_store: remove unnecessary if
* Documentation: remove incorrect info about turning off the heater
* be more specific in the patch description

Changes since v1:
* explain the use case of the new attributes set
* heater_enable attr: make it write-only
* heater_enable_store: define cmd as u8 instead of u8*
* heater_enable_store: remove unreachable data path
* heater_enable_store: remove unnecessary lock
* heater_enable_store: call i2c_master_send only if status==true
* define attributes as DEVICE_ATTR_* instead of SENSOR_DEVICE_ATTR_*

Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Message-ID: <20240930205346.2147-1-apokusinski01@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:07 -08:00
Heiner Kallweit
83cca55a63 hwmon: (nzxt-kraken2) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <1ac2be2d-df4f-455a-900d-821fc7bd12c4@gmail.com>
Acked-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
182137ecfb hwmon: (intel-m10-bmc) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <8ef99170-b37d-4c9a-b3bf-59f4ea76cf29@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
39a8cf342b hwmon: (raspberrypi) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <4e8893a1-b080-4676-97b9-a48ac9ead28a@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
1d92c936ca hwmon: (powerz) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Message-ID: <c4b4568b-59f6-43ac-8281-536a82ecd6ab@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
9df39924c4 hwmon: (gsc) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <bd909a2c-23ee-437d-9bd4-858119f6f266@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
10963cef5f hwmon: (sl28cpld) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <5c26d8cf-d6dc-46c5-be7c-fd8207b3f177@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
041e20ee60 hwmon: (surface_fan) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <d5d2570c-dfd9-4be5-ad9f-e721be477131@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
5deb42295d hwmon: (i5500_temp) Simplify specifying static visibility attribute
Use new member visible of struct hwmon_ops to simplify specifying
the static attribute visibility.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <2b1f2778-1127-4979-b02d-f75e16497ad7@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Naresh Solanki
7506ebcd66 hwmon: (max6639) : Configure based on DT property
Remove platform data & initialize with defaults
configuration & overwrite based on DT properties.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Message-ID: <20241007090426.811736-1-naresh.solanki@9elements.com>
[groeck: Dropped some unnecessary empty lines]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Heiner Kallweit
79bc0af904 hwmon: Add static visibility member to struct hwmon_ops
Several drivers return the same static value in their is_visible
callback, what results in code duplication. Therefore add an option
for drivers to specify a static visibility directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <89690b81-2c73-47ae-9ae9-45c77b45ca0c@gmail.com>
groeck: Renamed hwmon_ops_is_visible -> hwmon_is_visible
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Everest K.C.
edeed7b666 hwmon: (max31827) Fix spelling errors reported by codespell
Below mentioned spelling errors reported by codesepll
were fixed:
	respresents ==> represents
	signifcant ==> significant
	bandwitdh ==> bandwidth

Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Message-ID: <20241001011521.80982-1-everestkc@everestkc.com.np>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Farouk Bouabid
8f38236de6 hwmon: (amc6821) add support for tsd,mule
Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
among which is an amc6821 and other devices that are reachable through
an I2C-mux.

The devices on the mux can be selected by writing the appropriate device
number to an I2C config register (amc6821: reg 0xff)

Implement "tsd,mule" compatible to instantiate the I2C-mux platform device
when probing the amc6821.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Message-ID: <20240906-dev-mule-i2c-mux-v8-4-dbd28a150e41@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00
Farouk Bouabid
247a80fde1 dt-bindings: hwmon: add support for ti,amc6821
Add dt-bindings for amc6821 intelligent temperature monitor and
pulse-width modulation (PWM) fan controller.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Message-ID: <20240906-dev-mule-i2c-mux-v8-3-dbd28a150e41@cherry.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-11-10 14:48:06 -08:00