By making try_to_merge_two_pages() and stable_tree_search() return a
folio, we can replace kpage with kfolio. This replaces 7 calls to
compound_head() with one.
[cuigaosheng1@huawei.com: add IS_ERR_OR_NULL check for stable_tree_search()]
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lkml.kernel.org/r/20241002152533.1350629-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Remove PageKsm()".
The KSM flag is almost always tested on the folio rather than on the page.
This series removes the final users of PageKsm() and makes the flag only
This patch (of 5):
It is safe to use a folio here because all callers took a refcount on this
page. The one wrinkle is that we have to recalculate the value of folio
after splitting the page, since it has probably changed. Replaces nine
calls to compound_head() with one.
Link: https://lkml.kernel.org/r/20241002152533.1350629-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20241002152533.1350629-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alex Shi <alexs@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kai Mäkisara <Kai.Makisara@kolumbus.fi> says:
These three patches were developed in response to Bugzilla report
https://bugzilla.kernel.org/show_bug.cgi?id=219419
After device reset, the tape driver allows only operations that don't
write or read anything from tape. The reason for this is that many
(most ?) drives rewind the tape after reset and the subsequent reads
or writes would not be at the tape location the user expects. Reading
and writing is allowed again when the user does something to position the
tape (e.g., rewind).
The Bugzilla report considers the case when a user, after reset, tries
to read the drive status with MTIOCGET ioctl, but it fails. MTIOCGET
does not return much useful data after reset, but it can be allowed.
MTLOAD positions the tape and it should be allowed. The second patch
adds these to the set of allowed operations after device reset.
The first patch fixes a bug seen when developing the second patch.
V2: The third patch is added to fix a bug that resulted in not
blocking writes if reset occurs while the device file is not open.
Link: https://lore.kernel.org/r/20241106095723.63254-1-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the code starts new tape session when any Unit Attention
(UA) is seen when opening the device. This leads to incorrectly
clearing pos_unknown when the UA is for reset. Set new session only
when the UA is for a new tape.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20241106095723.63254-4-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Most drives rewind the tape when the device is reset. Reading and writing
are not allowed until something is done to make the tape position match the
user's expectation (e.g., rewind the tape). Add MTIOCGET and MTLOAD to
operations allowed after reset. MTIOCGET is modified to not touch the tape
if pos_unknown is non-zero. The tape location is known after MTLOAD.
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219419#c14
Link: https://lore.kernel.org/r/20241106095723.63254-3-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some early UFSHCI 4.0 controllers support the UFSHCI 3.0 register set.
The UFSHCD_QUIRK_BROKEN_LSDBS_CAP quirk must be set for these controllers.
Commit b92e5937e3 ("scsi: ufs: core: Move code out of an if-statement")
changed the behavior for these controllers from working fine into
"ufshcd_add_scsi_host: failed to initialize (legacy doorbell mode not
supported)". Fix this by setting the "broken LSDBS" quirk for the
SM8650 development board.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/0c0bc528-fdc2-4106-bc99-f23ae377f6f5@linaro.org/
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Fixes: b92e5937e3 ("scsi: ufs: core: Move code out of an if-statement")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241106181011.4132974-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warnings
WARNING: modpost: drivers/scsi/sun3_scsi: section mismatch in reference: sun3_scsi_driver+0x4 (section: .data) -> sun3_scsi_remove (section: .exit.text)
WARNING: modpost: drivers/scsi/sun3_scsi_vme: section mismatch in reference: sun3_scsi_driver+0x4 (section: .data) -> sun3_scsi_remove (section: .exit.text)
that trigger on a Sun 3 allmodconfig build.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/b2c56fa3556505befe9b4cb9a830d9e2a962e72c.1730831769.git.geert@linux-m68k.org
Acked-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rosen Penev says:
====================
net: ucc_geth: devm cleanups
Also added a small fix for NVMEM mac addresses.
This was tested as working on a Watchguard T10 device.
====================
Link: https://patch.msgid.link/20241104210127.307420-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When nvmem is not ready, of_get_ethdev_address returns -EPROBE_DEFER. In
such a case, return -EPROBE_DEFER to avoid not having a proper MAC
address.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241104210127.307420-5-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In 2010, runtime power management support was implemented in the SCSI
core. The description of patch "[SCSI] implement runtime Power
Management" mentions that the sg driver is skipped but not why. This
patch enables runtime power management even if an instance of the sg
driver is held open. Enabling runtime PM for the sg driver is safe
because all interactions of the sg driver with the SCSI device pass
through the block layer (blk_execute_rq_nowait()) and the block layer
already supports runtime PM.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Fixes: bc4f24014d ("[SCSI] implement runtime Power Management")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241030220310.1373569-1-bvanassche@acm.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241104205317.306140-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Tested-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20241104204823.297277-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241104202326.78418-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hrtimer_setup() and hrtimer_setup_on_stack() take the callback function
pointer as argument and initialize the timer completely.
Replace the hrtimer_init*() variants and the open coded initialization of
hrtimer::function with the new setup mechanism.
Switch to use the new functions.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/2bae912336103405adcdab96b88d3ea0353b4228.1730386209.git.namcao@linutronix.de
hrtimer_setup_on_stack() takes the callback function pointer as argument
and initializes the timer completely.
Replace hrtimer_init_on_stack() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/f0d4ac32ec4050710a656cee8385fa4427be33aa.1730386209.git.namcao@linutronix.de
hrtimer_setup_on_stack() takes the callback function pointer as argument
and initializes the timer completely.
Replace hrtimer_init_on_stack() and the open coded initialization of
hrtimer::function with the new setup mechanism.
The conversion was done with Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/17f9421fed6061df4ad26a4cc91873d2c078cb0f.1730386209.git.namcao@linutronix.de
Some users of hrtimer need to change the callback function after the
initial setup. They write to hrtimer::function directly.
That's not safe under all circumstances as the write is lockless and a
concurrent timer expiry might end up using the wrong function pointer.
Introduce hrtimer_update_function(), which also performs runtime checks
whether it is safe to modify the callback.
This allows to make hrtimer::function private once all users are converted.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20a937b0ae09ad54b5b6d86eabead7c570f1b72e.1730386209.git.namcao@linutronix.de
The hrtimer_init*() API is replaced by hrtimer_setup*() variants to
initialize the timer including the callback function at once.
hrtimer_init_sleeper_on_stack() does not need user to setup the callback
function separately, so a new variant would not be strictly necessary.
Nonetheless, to keep the naming convention consistent, introduce
hrtimer_setup_sleeper_on_stack(). hrtimer_init_on_stack() will be removed
once all users are converted.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/7b5e18e6dd0ace9eaa211201528cb9dc23752454.1730386209.git.namcao@linutronix.de
To initialize hrtimer on stack, hrtimer_init_on_stack() needs to be called
and also hrtimer::function must be set. This is error-prone and awkward to
use.
Introduce hrtimer_setup_on_stack() which does both of these things, so that
users of hrtimer can be simplified.
The new setup function also has a sanity check for the provided function
pointer. If NULL, a warning is emitted and a dummy callback installed.
hrtimer_init_on_stack() will be removed as soon as all of its users have
been converted to the new function.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/4b05e2ab3a82c517adf67fabc0f0cd8fe118b97c.1730386209.git.namcao@linutronix.de
To initialize hrtimer, hrtimer_init() needs to be called and also
hrtimer::function must be set. This is error-prone and awkward to use.
Introduce hrtimer_setup() which does both of these things, so that users of
hrtimer can be simplified.
The new setup function also has a sanity check for the provided function
pointer. If NULL, a warning is emitted and a dummy callback installed.
hrtimer_init() will be removed as soon as all of its users have been
converted to the new function.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/5057c1ddbfd4b92033cd93d37fe38e6b069d5ba6.1730386209.git.namcao@linutronix.de
The IORING_OP_TIMEOUT command uses hrtimer underneath. The timer's callback
function is setup in io_timeout(), and then the callback function is setup
again when the timer is rearmed.
Since the callback function is the same for both cases, the latter setup is
redundant, therefore remove it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk:
Link: https://lore.kernel.org/all/07b28dfd5691478a2d250f379c8b90dd37f9bb9a.1730386209.git.namcao@linutronix.de
rt2x00usb_probe() executes a hrtimer_init() for txstatus_timer. Afterwards,
rt2x00lib_probe_dev() is called which also initializes this txstatus_timer
with the same settings.
Remove the redundant hrtimer_init() call in rt2x00usb_probe().
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/all/66116057f788e18a6603d50a554417eee459e02c.1730386209.git.namcao@linutronix.de
The hrtimer is initialized in the KVM_XEN_VCPU_SET_ATTR ioctl. That caused
problem in the past, because the hrtimer can be initialized multiple times,
which was fixed by commit af735db312 ("KVM: x86/xen: Initialize Xen timer
only once"). This commit avoids initializing the timer multiple times by
checking the field 'function' of struct hrtimer to determine if it has
already been initialized.
This is not required and in the way to make the function field private.
Move the hrtimer initialization into kvm_xen_init_vcpu() so that it will
only be initialized once.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/9c33c7224d97d08f4fa30d3cc8687981c1d3e953.1730386209.git.namcao@linutronix.de
When a request is created, the hrtimer is not initialized and only its
'function' field is set to NULL. The hrtimer is only initialized when the
request is enqueued. The point of setting 'function' to NULL is that, it
can be used to check whether hrtimer_try_to_cancel() should be called while
retiring the request.
This "trick" is unnecessary, because hrtimer_try_to_cancel() already does
its own check whether the timer is armed. If the timer is not armed,
hrtimer_try_to_cancel() returns 0.
Fully initialize the timer when the request is created, which allows to
make the hrtimer::function field private once all users of hrtimer_init()
are converted to hrtimer_setup(), which requires a valid callback function
to be set.
Because hrtimer_try_to_cancel() returns 0 if the timer is not armed, the
logic to check whether to call i915_request_put() remains equivalent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/50f865045aa672a9730343ad131543da332b1d8d.1730386209.git.namcao@linutronix.de
hrtimer_init*_on_stack() is not covered by tracing when
CONFIG_DEBUG_OBJECTS_TIMERS=y.
Rework the functions similar to hrtimer_init() and hrtimer_init_sleeper()
so that the hrtimer_init() tracepoint is unconditionally available.
The rework makes hrtimer_init_sleeper() unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/74528e8abf2bb96e8bee85ffacbf14e15cf89f0d.1730386209.git.namcao@linutronix.de
Hook "qedi_ops->common->sb_init = qed_sb_init" does not release the DMA
memory sb_virt when it fails. Add dma_free_coherent() to free it. This
is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().
Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241026125711.484-3-thunder.leizhen@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hook "qed_ops->common->sb_init = qed_sb_init" does not release the DMA
memory sb_virt when it fails. Add dma_free_coherent() to free it. This
is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20241026125711.484-2-thunder.leizhen@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
esas2r_build_cli_req() has been unused since it was added in 2013 by
commit 26780d9e12 ("[SCSI] esas2r: ATTO Technology ExpressSAS 6G
SAS/SATA RAID Adapter Driver")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241102220336.80541-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In pr_err(), bdev_open_by_path() should be renamed to
bdev_file_open_by_path()
Fixes: 034f0cf8fd ("target: port block device access to file")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Link: https://lore.kernel.org/r/20241030021800.234980-1-liubaolin12138@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241028102428.23118-2-pstanner@redhat.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/scsi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way do a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241028080754.429191-2-u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Increasing the per-request size maximum to 4MiB (8192 sectors x 512
bytes) runs into the per-device DMA scatter gather list limit
(max_segments) for users of the io vector system calls (e.g. readv and
writev).
Increase the max scatter gather list length to 1024 to enable kernel to
send 4MiB (1024 * 4KiB page size) requests.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20241025185009.3278297-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Devices can be allocated and freed at runtime. For example during a soft
reset all devices are freed and reallocated upon discovery.
Currently the driver fully initializes devices once in pm8001_alloc().
Allows initialization steps to happen during runtime, avoiding any
leftover states from the device being freed.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Terrence Adams <tadamsjr@google.com>
Link: https://lore.kernel.org/r/20241021201828.1378858-1-tadamsjr@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pm8001 driver sets pcs event log threshold very high which causes
most of the FW log messages to not be captured. Add a module parameter
to configure pcs event log severity with 3 (medium severity) as the
default.
Co-developed-by: Bhavesh Jashnani <bjashnani@google.com>
Signed-off-by: Bhavesh Jashnani <bjashnani@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20241016220944.370539-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The timer and hrtimer soft interrupts are raised in hard interrupt
context. With threaded interrupts force enabled or on PREEMPT_RT this leads
to waking the ksoftirqd for the processing of the soft interrupt.
ksoftirqd runs as SCHED_OTHER task which means it will compete with other
tasks for CPU resources. This can introduce long delays for timer
processing on heavy loaded systems and is not desired.
Split the TIMER_SOFTIRQ and HRTIMER_SOFTIRQ processing into a dedicated
timers thread and let it run at the lowest SCHED_FIFO priority.
Wake-ups for RT tasks happen from hardirq context so only timer_list timers
and hrtimers for "regular" tasks are processed here. The higher priority
ensures that wakeups are performed before scheduling SCHED_OTHER tasks.
Using a dedicated variable to store the pending softirq bits values ensure
that the timer are not accidentally picked up by ksoftirqd and other
threaded interrupts.
It shouldn't be picked up by ksoftirqd since it runs at lower priority.
However if ksoftirqd is already running while a timer fires, then ksoftird
will be PI-boosted due to the BH-lock to ktimer's priority.
The timer thread can pick up pending softirqs from ksoftirqd but only
if the softirq load is high. It is not be desired that the picked up
softirqs are processed at SCHED_FIFO priority under high softirq load
but this can already happen by a PI-boost by a force-threaded interrupt.
[ frederic@kernel.org: rcutorture.c fixes, storm fix by introduction of
local_timers_pending() for tick_nohz_next_event() ]
[ junxiao.chang@intel.com: Ensure ktimersd gets woken up even if a
softirq is currently served. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org> [rcutorture]
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241106150419.2593080-4-bigeasy@linutronix.de
Raising the timer soft interrupt is always done from hard interrupt
context, so it can be reduced to just setting the TIMER soft interrupt
flag. The soft interrupt will be invoked on return from interrupt.
Use therefore __raise_softirq_irqoff() to raise the TIMER soft interrupt,
which is a trivial optimization.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20241106150419.2593080-3-bigeasy@linutronix.de